Stop while he was sleeping and other problems on Windows 8.1, Vaio Flip 13

Similar Questions

• 0x100000EA and other problems on Windows 7 (64 bit) on HP Pavilion dv6-1330 ep

  I got the blue screen a few times with this error report, tried to recovery through partition; that could not, end up having to start from the Cd to reinstall windows 7.

  The problem remains, even after installation of the drivers available on the HP page or via the wizard.

  I also tried F2 on startup and writes a check, he revealed no problem on the disk or memory.

  Published: also, this usaly occurs when opening gif´s

  Error message is:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 2070

  More information about the problem:
  BCCode: 100000ea
  BCP1: FFFFFA8007B03640
  BCP2: 0000000000000000
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Checked the inforamtion SYSTEMS and also got the following info:

  

  Edit: found the drivers Id: ACPI\HPQ0004 and ACPI\ENE0100.

  Problem still not fixed...

  Hello DM19,.

  Thank you for your reply and I hope you had a wonderful weekend!

  I understand that you did your installation on the Windows disc.  You now have all the drivers except the one that has a code 10 on it.

  Did you do all your updates to Windows, if only he can solve.

  Device Manager have you tried to just update the driver?

  Have you tried running MS difficulty ?

  Did you download and install the driver for your system and improvements to the operating system and software page QFE.

  If this has not resolved the driver problem, the page of software and the driver has a Manager option of recovery for you to download.

  I download it and follow the prompts.

  Once you complete this step, I would install all drivers of origin since the Recovery Manager

  Using Recovery Manager to restore the software and drivers (Windows 7)

  Now run the Wizard help HP to get the updates from HP.

  Good luck!

• I bought my iPhone 5 s by T-Mobile and 2 months left to purchase. My phone don't get re will not charge. Support Apple says this isn't the phone and replace the cable. This was done and the problem remains. Anyone who has experience of this pro

  I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?

  He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}

• Update Windows errors and other problems.

  I just installed windows 7 on my computer. The problem is I can't seem to get the updates, I tried all sources (some worked, but did not resolve the full question). Patches some of the sources I'm like, Diagnostics Windows, Microsoft fixit and other software troubleshooting. Here are the two questions I have; 1. I try to check the windows update runs for several hours and then returns to "check updates for your computer. 2 updates show is ready to install on the stop button on the start menu, but not shown in WU. If someone can solve this problem, and I know that research on a certain need of people of this response, thank you.

  Your best solution is going to be a huge part of patience.  WU was extremely slow during the last 6 months.  I got a new facility just a day that lasted 7 hours ago to run.

  If your closing button indicates the exclamation point.  Do a restart and let him finish settle.  Return to Windows Update, then start it.  If you use a laptop, turn off the sleep function.  Go to bed and check in the morning.

• sleep and extended problem solved!

  Hi all.
  Finally I solved my problem (see "sleep and extended in windows XP" for more details).
  I uninstalled everything on HP printer because Windows XP plug-and-play service does not load the Power Manager settings if it is not the printer.

  Now I understand why the HP software does not work properly, you know?

  See you soon.

  Gianluca

  It seems that the HP software has adopted some features of the operating system. Normally, it is very good for the manufacturer to give the features more functions.

  But if there is a third software such as Power Saver from Toshiba could occure problems because the energy saver adopts XP power settings and it administer very dominate. If the HP printing software was not able to adopt the settings of MS!

  Hans Bye

• Stream HP: I accidentally closed my laptop while it was restarted and now it's the juice a black screen it has been hours

  I accidentally closed my laptop while he was now to restart juice is a blank black screen, it won't do anything it's only a couple of months

  Sdyork

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your new HP PC and wanted to help.
  
  You should not have problems with a PC this new.
  
  While this PC is still under warranty, contact HP customer care directly so that they can put you in contact with HP Technical Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  Good luck

• Incorrect IMEI in Motoblur account online and other problems

  My first Atrix lasted a few weeks due to a problem of speaker and has been changed (so an IMEI change). I had frequent problems with the mail out from the phone - sometimes the emails go straight, sometimes afetr a few hours, sometimes not at all. I am aware that it is a problem acknowledged in the USA and Orange UK have countered the problem on an Atrix with their technicians.

  Today, I logged on my account Motoblur to track my phone that I had had problems with the application Android MapmyRide. When I logged I found the IMEI number on the account was incorrect and I have been unable to "find my phone". I'm pretty sure I could follow him in the past but is not sure that it is with the newer phone.

  Read the other posts I see that others have had problems with IMEIs incorrect but no real solution

  When I bought the phone I thought I was getting about the best phone on the market, but I had nothing other that problems (there is also a bug in the webtop software that causes freeze it and stutter when you run BBCiplayer that requires a reboot battery!)... I'm starting to wish I had moved on.

  The phone is not 'rooted' (don't really know what it means anyway.

  HELP PLEASE!

  Another point to note: my motoblur account says I need to download the new software for it by clicking the button on the account to send a message on the phone - I did several times in the last three days without message on the phone. Update the software of the phone also fails and it's going in a vicious circle of the search for an update and no final results. GREAT! I guess that this problem is related to the incorrect IMEI.

  Mark,

  email address was like my address of profile... until I went forward with the master reset last night. Lost all the apps that was what I was trying to avoid (but had written a long list before wiping the phone).

  The reset seems to have succeeded, I reused the old username and password, the software update also went through OK and the IMEI is now correct.

  BUT... some of the apps no longer appear in full screen; Your Orange (latest version), Pocket (secure storage), Solitaire (entertainment favorite girls). All show to about 2/3 of size which is annoying and makes Orange your almost unusable. Any suggestions?

• BlackBerry battery Z10 drainage and other problems

  Hi all.  I'm new to this forum, but certainly not new to Blackberry devices.  I had a playbook before my z10 and I know that the two are not at all similar, but I like Blackberry interface.  I read a lot of posts here on the drainage of the battery and overheating and the phone restarts several times, and I had all these problems.  Recently, after reading here and trying to get a grip on what to do with my z10, I called my cell phone provider technical support to see what they had to offer advice.  I live in the Canada, Telus is my provider and they said either on send to get or replace the battery or both battery and motherboard replaced like who could fix the overheating problem.  My phone overheat in the upper left corner of the phone, but only when I play a game that I downloaded on the android market as 1mobile market.  In general, it is a racing game where the screen is affected much.  I noticed that the back of the device overheating also and this worries me greatly as I wonder if my phone is going to explode in my hands!  I did a cleanup of security and has not been successful in restoring the last backup I made before is erased.  In some way my Blackberry ID and password was not accepted when I put my phone again.  It's frustrating.  But now I always get the overheating problem and my battery life is not great, that it was better before erasure.  Weird.  I ask some advice if I should send the phone or to swap with another since I was still under the 1 month to own this phone?  I have till next week Monday a decision, because it is when my replacement z10 phone is supposed to be in my Telus in my store.  Thanks in advance to all.

  At the end of a day recently, I tested, did not use wifi, no games, no cell data, and my battery had fallen to 30% while having the phone and SMS language. Before I start my day, the phone is fully charged. Technical support told me that isn't normal.

• Features of the power manager and other problems associated with the T510

  For the better part of 5 years, I was a happy user of an IBM Z60m and decided it was time to move my z60 to my son and buy a new T510.  Well, I have after several weeks of property I can honestly say I'm irritated and frustrated by several current issues and I'm ready to send back all.

  Starting from the moment I pulled it out of the box I was having problems of power management.  I was on Microsoft help forums, called the lenovo support and spent countless hours on blogs and forums looking for help.   No matter what I do in the put lenovo on arrangements to take away my computer goes to stanby after one minute of inactivity and then wonder my windows password.  After a full day to insert my password my frustration level is off the chart.  I removed the password in the settings of the user who has not helped.  I changed the global settings to disable password in stanby mode which did not help.  I changed the function to optimize power and others, but none of it helped.

  Beyond these problems... I inserted two different discs to insert new programs and my system kept telling me that he did not read either.  I first thought they were zero but my old laptop ibm read without problem.

  So there you have it.

  Are you sure that the system is set the mode after 1 minute?  Or is the screen is locked?

  Try this:

  1. right click on the desktop and choose "Customize".

  2. click on "screen saver" in the lower right corner

  3. uncheck the box that says "On Resume, the logon screen"

  Which solves your problem?

• By clicking several times for switching Applications and other problems of Click

  I would like to know when it started, because then maybe I could narrow it down. I have actually some problems, but I strongly suspect that they are related. I do not think that this started immediately when I upgraded to El Capitan, but I can't say when it started.

  1. If I Mail to Safari and I click on Safari to bring it forward, nothing happens. If I click a second time, then Safari comes forward. The problem is not limited to these two requests. Maps, Finder, TextEdit and others do, but it doesn't happen in all cases. For example, if I click on a TextEdit window it before now, but if TextEdit is in front, the other application is not until the second click.

  2. If I double-click a file or application in the Finder, it tries to open the point three times. This usually results in two dialog boxes telling me that the application cannot be opened because the third opens.

  3. I have my user folder and disk in my dock to quickly navigate to a specific folder using the grid. However, when I click on an item in the grid, the icon blinks but nothing happens and the view disappears, won't let me choose something or drilling to the location I wanted.

  What I tried

  A different user account - another user account, all right. It tells me that the problem is at my user account level and not at the level of the system. It's good, almost.

  Connection with the elements of wide opening (SHIFT key is pressed) - This resulted in no change in the above problems.

  Watch the Console - I ran the Console to see if all the messages when problems occurred. Zip fastening. Zilch. Nada.

  What I think

  I am sure that this is a problem with an article by third party due to the fact that it happens to other users on the same computer, but since this is not an element of connection, so I'm stumped on how to refine the problem down to find the cause.

  Does anyone have any suggestions?

  Okay i ' l jump to... Maybe you're more think it is a little. Have you tried another mouse or trackpad, then a reboot before going too far into other possible problems?

• Windows Update does not start and other problems...

  When I connect to windows update, the page becomes white and everything continues to load.  I can't start in safe mode to run all the patches.  I also have an annoying problem of svchost that takes more than 90% of my memory.  I ran every virus known to man program... MalwareBytes, Kaspersky, ESET, to name a few and they all say that my computer is clean.  I am running windows xp pro service pack 3.

  Hi Bopatop,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click on Start , then run.

  (b) type msconfig , and then click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Also, check out the articles below and check if that helps.

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box

  http://support.Microsoft.com/kb/927385

  A description of Svchost.exe in Windows XP Professional

  http://support.Microsoft.com/kb/314056

• BlackBerry smartphones can't keep not fresh and other problems...

  Hello

  I'm having some trouble with my berry.

  First, it will not keep its charge.  The battery lasts only 8 hours or more.

  Second, I can send and receive texts.  Apparently, my ankles have been sent, but I don't much get pins, e-mails, facebook things back.  I received responses from the pins that noon last night, I sent.

  This morning there was an animated hourglass in the center of my screen every 10 seconds.  It would be flash and disappear.  I pulled out the battery because this is the usual solution for everything, but the empty battery pins just faster and still no reception.

  Any help would be appreciated.

  It does not mean you have too many applications installed, you can just have too open. You know when your using your PC and you have multiple windows open but you reduce them just so you can go back and fourth? It's a bit like that. Tell I open "notes." Then, I hit the Red hang up button to return to the home screen. I have to open "tasks". 'Notes' is always in the back. It is of course more crucial when you leave something open your browser that will constantly call data. To close properly the somerhing click on the menu button and select close or exit. To see what is open hold down the ALT key and press on and release the previous button. You cannot close the House, browser, messages, PTT, BBmessenger or by phone. Although I don't know if that alone caused your problem, but I'm glad that you guessed it work.

• Excel and other programs in windows 8 'stop working '.

  I am constantly a message box with a green movement live in Excel that says the program has stopped working and must stop.  I thought that maybe my worksheets were too big, but when I installed a new design software, (from the App store windows), I started having the same message and the problem with him.  I have a Dell all-in-one with a huge amount of memory, so I know this isn't that.  What can I do to stop what is very frustrating.

  I recently did a post on helping them to identify it.

  http://cmdrkeene.com/fix-sluggish-slow-PC

• Signing of documents with certified identification some users get valid message and other problems? Any idea?

  Hello

  Will sign us documents with a certified identification and some users get a valid status then that of other issues. Same type of certifcate KPN Corporate market CSP assuré CA

  any idea?  Thank you

  Natasja

  It seems that some users have the certificate root in their 'approved identities' and others not. You have not specified which version of Acrobat you use but in Acrobat XI right - click signature, select "Show Signature Properties" and click on "Of the see the signatory certificate" button (in versions prior to Acrobat, it's the same thing, just the button is called a bit different, but with the same meaning). Next to view dialog box of the certificate on the left pane which shows the certification path. Select the top certificate of the page, then click on 'Confidence' tab on the right side. That do both in the facilities where you get the status valid and not. I bet where you get valid status the advanced certificate in the chain is approved and where he is unknown, it is not approved. You can directly add the confidence of this dialog box by clicking on the button "Add to approved identities".