Storage system problems

Similar Questions

• Impossible to safely remove external USB HDD - ejection of mass storage device problem

  Hello

  I have a 250 toshiba external hard drive. "When I go safely remove device and click on stop, guests me that ' ejection of mass storage device problem and try later.

  Is there a reason for this? As I have heard it is dangerous to pull the cord without stopping it first.

  This happens usually when something is always access to the USB - HDD.
  Yes, it s dangerous to pull on the cable, because you can lose some data and the file system may be damaged. But if you have a situation where you need the drive to take with you and want to just get out the cable to the USB port there is a little trick to disconnect the security apparatus:

  Do right click on 'My Computer'-> click on Hardware-> click "devicemanager"-> go into "diskdrives"-> then you need to click on the drive that is your USB - HDD-> with the right button and then click on 'Properties'-> in the menu properties of this drive, you must go on "policies" and click on "optimize for quick removal"-> and then click OK and exit this menu and all-> perform a reboot-> closing information fact. :)

  After that, it s safe for remove you your drive even if it s not ejected. :)

  Welcome them

• digital storage system will not identify camera support to import photos in windows live photo galleryo

  my hardware of digital storage system that downloads my digital camera mounts does not automatically that recognize the media as he did before in windows

  Media Player so I can import my photos in my windows live photo gallery, what I need to download free software to solve this problem?
  Hi skipmalasarte,
   
  Try to download and install the latest driver for the device from the manufacturer site to solve this problem.
   

  You can also follow this step to do the same thing:

  a. open the Manager of devices by clicking the Start icon, click runand type devmgmt.msc and press ENTER to open the Device Manager.

  b. double-click the type of device you want to update or change.

  c. right click on the device driver specific, you want to update or change.

  d. click set to update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  More information on:

  How to manage devices in Windows XP

• storage system on the external hard drive recovery?

  storage system on the external hard drive recovery?

  When you request support, please provide the name number and produces complete model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  You do not save the HP system on an external hard drive recovery. You must create your recovery media personal HP for recovery works. HP Recovery can be created using DVD + R discs or a 32 GB USB Flash drive. Please see create recovery discs or record a recovery Image on a Flash USB (Windows 8) drive or create recovery discs or record a recovery Image on a Flash drive (Windows 7) for instructions on creaing your HP recovery media.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Sierra of MacOS - 50-100GB of storage system?

  Hi all

  I have a Macbook Air from mid-2013 with 120 GB of SSD storage. I have updated my OS sierra and noticed that the 'system' takes up 100 GB of storage! I tried to delete my files, but for some reason, I still has a very high amount of the storage system.

  I decided to clean my computer everything and do a clean install. With the clean install, I have 50 GB of storage of the system. This sounds like a ton of storage used for system to me. Is this typical? I remember that a lot of space in the Yosemite/El Capitan.

  Thanks a lot for your help!

  120 GB SSD storage does not work. What you need, it is 10 times this amount of storage and memory far more to have a working machine. Got a HD big or better get a new machine and couple HDDs connected outside your small computer.

• Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

  I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

  * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

  Hi jsserrano68,

  Read the following article about the product keys for Windows:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

  In addition, if you need to contact Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

  Thank you

  Deb

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Z3 blackBerry my device and storage system is full.dont how to remove

  I tried to remove some applications.but yet, nothing seems to b reduction of the storage. The storage system seem to occupy as much space... Thank you I expect a quick help.

  Two copies:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-Z3/am-using-a-BlackBerry-Z3-please-HW-do-I-delete-...

• HP EVA4400 upgarde storage system

  Hello

  I want to add drive HARD additional existing HP EVA4400 Storage System.. a colud explain to me step by step process to guarantee this.

  My OS: RHEL 5.6 64it...

  Thank you

  Alibert

  Hello

  You can find instructions in the middle of the page #39 of the following document:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01883144/c01883144.PDF

  Kind regards

• The storage system upgrade

  What risks are there to my ESXi cluster by performing a storage system, level as on a VNX and how serious is the risk (i.e. the temporary loss of connectivity when failover path to the secondary controller, performance degradation, etc.)?  I use Fibre Channel and I need to upgrade the software of OS of OE on my VNX.

  If zoning is configured properly (i.e. of access roads to the SPA and SPB) ESXi, you shouldn't really notice an interruption but simply switch paths to the lun. If you run very high workloads, you should consider to upgrade during off-peak hours (the pre-upgrade check will determine the load of the CPU on the SPs and warn you if it is too high for an upgrade). I just upgraded a few unified of the VNX5400 systems and it took about 3 hours for the upgrade file and block OE.

  André

• What is a virtual port storage system

  VMware now supported the harbour active/active, active/passive, and virtual storage system. What is virtual port storage system, you can give me same example?

  in san guide old version, I can see the storage mode, indicate it is active/active or active/passive, find the last guide of san, not to mention that the online guide compat?

  A link to ' [storage virtual port | ]. "[http://virtualgeek.typepad.com/virtual_geek/2009/04/are-you-Stuck-with-a-single-Really-Busy-Array-port-When-using-ESX-script-for-Balancing-Multipathing-in-ESX-3x.html].

• VCB to backup server with HP's Eva and Dell AX4 storage systems

  I have two storage systems connected to a backup server. It is installed on Windows 2003 Server x 64 PowerPath5.2. Windows see each storage only once, so I think that multiple paths to the storage works correctly. Whenever I try to start to browse (or start the backup operation) a VM on HP Eva everythink is ok, but for the VM on AX4 I recive error message:

  Error: Cannot open the disk blklst

  :/ / snapshot-2627 [VRAID5_1, 43TB_datastoreDell3] PLBOLFS01/PLBOLFS01.vmdk@plbolvc:

  443? xxxx/xxxx. Could not open the file on disk: error: Disk library failed (can't access

  a SAN/iSCSI LUN support this virtual disk. (Tip: If you use vcbMounter y)

  or may use the '-m ndb' option to switch to disk based network access if it

  you want.) If you were trying to access at the file level, stop the vmount served

  this by typing "net stop vmount2" in a command prompt to force vmount to re-scan f

  or SAN LUNS and try the command again.). Cannot open ' blklst://snapshot-2627 [VRA

  [ID5_1, 43TB_datastoreDell3] PLBOLFS01/PLBOLFS01.vmdk@plbolvc:443'. Conf OMIS

  Figure scsi0:0 of disk.

  An error has occurred, cleaning

  ...

  D:\mnt\PLBOLFS01 deleted directory

  PrepareForBackup() failed to prepare PLBOLFS01 for backup, returned the error 1

  The external command failed. See the above error.

  Exit code: 1

  What can I do with it?

  VCB Version 1.5

  Next step would be to check a second time your zoning and lun masking. There could be a conflict with the various mpio drivers between eva and the clariion. I would try to remove all mpio drivers too.

  Dave

  ************************

  If the automobile had followed the same development cycle as the computer, a Rolls-Royce today cost $100, get 1 million miles per gallon, and explode once a year, killing all the world inside.

  Robert X. Cringely, InfoWorld magazine

• storage OSX problem

  Hi, I have a problem with my Macbook SSD, I have tons of available storage space, but according to the ventilation of storage, I'm almost out of storage.

  I'm a complete newb or something is wrong,

  could someone please advise me and point me in the direction of a solution.

  Thank you

  

  The program that generates this view isn't reliable.  Often a re-indexing of Spotlight will correct:

  https://support.Apple.com/en-us/HT201716

  Ciao.

• Update of Mac app Store system problem

  Hello

  I have a problem with my Mac App Store. It displays some system updates (Safari 9.1 update secrurity 2016-002 7.2 command line tools 10.10.5)

  but it doesn´t install those. I can click on update, it starts for a few seconds and then nothing happens.

  I even downloaded it from apple, but this doesn´t never work.

  Any help will be much appreciated.

  Thank you much in advance.

  Greetings

  Daniel

  Try to manually download this update from the drop-down list. If all goes well he'll fix everything that's wrong with your kit.

  Download update of OS X Yosemite 10.10.5 Combo

  By the end of 2012 mini Mac, OS X El Capitan 10.11.4. Apple Watch, 38 mm silver AL, Watch OS 2.2; iPad 2 Air & iPhone 6 + iOS 9.3

• Qosmio X 500 - 11U restarts when games & cooling system problem message

  Hello

  I have a Qosmio X 500 - 11U PQX33E, bought in the summer 2010. Since 2012 (1 month after the warranty ended) he started to do restarts without reason, but I gave much attention to it, as it happened rarely. However, after 1 year things are worse and I ended up having a cell phone game that I used only as a PC Web browser. From time to time, I blew the fans to clean... Finally, I decided to fix it.

  I gave it to a technician, he cleaned, replace the dough thermal CPU - GPU and replaced one of the fans who did not work properly.

  Still nothing has changed. I tested it again (by running windows experience rating), and it crashed as before.

  I made the big decision to go back to factory settings and I made a clear installation of all components of the system (including the stuff of all the toshiba).

  Restart again for the note windows. ... (the same thing happens when I run any high graphics games)

  I have flashed the bios to v2.90

  Restart again for the note windows. (the same thing happens when I run any high graphics games)

  In addition to the above, because I did the clean install of the system, I started to get the message ' WARNING: a problem with the cooling probe happened... return it for service.

  I can hear the fan is working but when I run the diagnostic tool for Toshiba, the CPU usage is at 50% and the fan to 0%, even in use high power (yes I changed both power settings)

  Any help would be much appreciated, because I really feel VERY bad after paying 2500 EUROs for a gaming computer I can not operate for its intended use.

  Thanks in advance

  However when I try to run all 3D graphics applications (and some flash feature facebook games) it blocks (auto-off)

  The laptop turns off automatically in order to avoid the damage hardware parts... which can occur due to a higher internal temperature...

  You mention that the fans do not work

  (use of fan is at 0% because my fans are now connected to the USB ports

  I suppose that the temperature rises and the laptop turns off because cooling fan use in 0%

  To me, it looks like a typical hardware malfunction and from my point of few service technician must verify and fix it... here in the forum, we can only talk and discuss possible solutions but finally the hardware problems should be fixed by engineers of the service...

• USB Mass Storage Device problem

  I have the HP Pavilion Elite E9120f desktop computer. Whenever I start the computer, it shows that I have USB mass storage drives, G, H, I and J. However, there is no attached USB mass storage device. No one knows why this happens? I just usually click on the removal of the safety equipment and remove false devices. I get the message "this device can now be deleted without the computer problem. This machine runs Vista and has a 1 terabyte of hard drive. Thank you

  Bart, have you checked in 'My Computer' when this happens to see if the drives are there?  Almost looks like you have a virtual drive on your computer program.  Check also in start/startup to see if he is there that nothing listed that could cause this to happen.  Four readers Ghost is really strange.