store the strings and numbers in a spreadsheet

Similar Questions

• Is there a way to differentiate the string containing the characters and numbers?

  Hello, I created an application to read data from a serial port device. The problem is that the device, at startup, displays a block of text that contain characters describing the device. Shortly after, he displays a command prompt "command:" it's when I want my VI to enter the command to start to take action.

  I was looking at the VISA waiting on the event and looks that could be used to wait for the output device, only a "Serial character", but there is no distinction between the letters and numbers that I can tell.

  If the device is out of numbers in the reading string, of course, no need to enter the command to start to take action once again, which will probably only confuse the device. In this case, I want my VI to continue taking measures with VISA Read.

  The reason is that when I run the application, the device may have already been turned on. Send this command to the device using VISA Write is not necessary at this time.

  Any advice would be appreciated. Thank you.

  This makes it much easier.  In this case, this will do the trick.  You will notice that the bottom of the case does not match even if it has valid values inside.  The only thing that will match if the entire string is of the form XX. XXXX. Incidentally, since we are only matching numbers now, you can remove the "ignore case" Boolean as there is more important.

  

• How to convert the string with numbers in the table of Boolean 2D

  Hello

  I have input a string with comma separated numbers 1,192 (starting at 1).

  This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.

  The 2D table consists of 4 times of 0.47 Boolean values.

  1.48--> [0.47] numbers [0]
  49.96--> [0.47] numbers [1]
  Numbers 97.144--> [0.47] [2]
  145.192--> [0.47] numbers [3]

  If a '1, 49, 97 145' input string put all [0] [0.3] true.

  How can it be easy/fast resolved?

  Thanks for help

  Break the string of numbers in a table of numbers.  (Spreasheet String to Array).

  In a loop For, index with each issue of this table.  Use in the range and Coerce to see if it is in the range of numbers.  (You can put this in a loop For as auto good indexing through the ranges).  If it's in the range, then use subset replace table to activate the corresponding item in a real.  If this is not the case, do nothing.  Maintain the table of Boolean in a shift register.

  Repeat this step for each number in your table.

  (What is a class assignment?)

• Camcorder Camileo P100 store the date and time

  My recently purchased camcorder camileo P100 store the date and time.
  Whenever it starts it must be reset because it refers to the default date.

  Has anyone else had this problem

  It looks like a camera malfunction don t think you can fix it.
  I suggest you to get in touch with the dealer and replace the cam

• How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  I recently had to format my hard drive and reinstall iTunes 12.3.2.35 on my Win7 PC. As part of the re - install iTunes, I clicked on the button scan for music.  This has created duplicates several of my songs.  I deleted then the duplicate songs from iTunes, but when I went to play a few songs a pop-up said "the song would not be because the original could not be found.  You want to locate? "When I tried to locate the song it is not found, but when I pulled the songs out of the trash they could be found.

  How can I keep the original and remove any duplicate songs in iTunes on PC Win7 which took place after iTunes to scan for music during a re - install?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• Why the Pages and Numbers do not use the default printer?

  Recently, I added a second printer to my home network and selected as the default printer. But when I try to print, the correct printer is selected in the dialog box print only part of the time and apparently depends on which application to print from. I believe that Safari, Mail, Contacts and calendar properly use the default printer, then the Pages and Numbers and instead do not the old printer unless I have change the selection in the dialog box impression every time I print.

  How can I get Pages and Numbers to correctly use the right default printer?

  The problem that is happening on my machine (OS X El Capitan 10.11.2, 5.6.1 Pages and numbers 3.6.1) and my wife (running Maverick 10.7.5, Pages ' 08 3.0.3 and Numbers ' 08 1.0.3) and has persisted through a reboot. The old printer is a HP OfficeJet Pro 8600, accessible via WiFi. The new printer is a Brother MFC-7340 connected by USB to a Time Capsule that is accessible via WiFi.

  In the print... dialog you select

  View the Presets...

  in the menu presets. In the sheet drops down, uncheck the box marked

  Reset the Menu Presets for "Default settings" after printing

  Click OK. Then select

  Last settings used

  or a custom preset that you created in the menu.

• Sort the listBox that contains the text and numbers

  Is there a script to sort a listBox control that contains the text and numbers using a button?

  I would have preferred that he sort 1, 2, 10, 20, 100, not 1, 10, 100, 2, 20

  Examples are part numbers: HP1457100-9, 011-2025-479, 85216, etc.

  You may need to change this line:
  oTarget = this,

  It refers to the object to display the results.

• Printer HP PSC 2355 all-in-one cut at the bottom of all the letters and numbers.

  I have a HP PSC 2355 all-in-one printer and use Windows 7 Home Premium 64-bit.

  When you print documents, the bottom of the letters and numbers do not print.

  Hello techphobic

  I'm glad that you have solved your printing problem. If the problem recurs, do not hesitate to post back.

  As a possible explanation, looks like you had a faulty cartridge or the low ink level. Part of solving the problems of print quality is to try another cartridge that you already have and it resolved the problem. A cartridge bad or low ink level can cause horizontal stripes in images either because it doesn't have enough ink or it has problems, releasing the ink. If the lower part of the page is cut off, then it looks like the cartridge's ink.

  I mentioned the notebook because it is a very basic application that you can print from. Sometimes printing problems are specific to a particular application and printing from Notepad allows you to isolate the problem. As a dedicated article for printing from the Internet problems, I wanted to narrow the problem to the right Internet printing.
  Problems printing from the Internet

• I'm trying to extract the strings and load them into a text-helpplease file

  I'm trying to extract the strings and load them into a file text without space between them - see below
  
  p_csa = ISCC M4 DP
  
  where p_csa is a tring to load into a text file
  
  
  
  Code:
  
  SELECT SUBSTR (p_csa, 0, 0) INTO v_telco FROM DUAL;
  SELECT SUBSTR (p_csa, 1, 4) INTO v_comp FROM DUAL;
  SELECT SUBSTR (p_csa, 5.3) INTO v_csa_prefix FROM DUAL;
  SELECT SUBSTR (p_csa, 8, 4) INTO v_csa_type FROM DUAL;
  
  fileidinvoice: = UTL_FILE. FOPEN (c_data_location, filenameinvoice, 'W');
  fileidlog: = UTL_FILE. FOPEN (c_data_location, filenamelog, 'W');
  
  UTL_FILE. PUT_LINE)
  fileidinvoice, v_telco | » '|| v_comp | "|" | v_csa_prefix: "| v_csa_type);
  
  
  -the content of the file-
  
  ISCC M4 DP
  
  =====================
  I want to remove the space between the chain above for the content of the file should look like this:
  
  -the content of the file-
  
  GCSIM4DP

  Hello

  976253 wrote:
  I'm trying to extract the strings and load them into a file text without space between them - see below

  p_csa = ISCC M4 DP

  where p_csa is a tring to load into a text file

  Code:

  SELECT SUBSTR (p_csa, 0, 0) INTO v_telco FROM DUAL;

  Is it always NULL?

  SELECT SUBSTR (p_csa, 1, 4) INTO v_comp FROM DUAL;

  You don't need the double table much in PL/SQL. You can simply say

  v_comp := SUBSTR (p_csa, 1, 4);
  

  Almost all integrated single-row functions work in PL/SQL. (NVL2 is the only one I know who does not work in PL/SQL).

  SELECT SUBSTR (p_csa, 5.3) INTO v_csa_prefix FROM DUAL;
  SELECT SUBSTR (p_csa, 8, 4) INTO v_csa_type FROM DUAL;

  fileidinvoice: = UTL_FILE. FOPEN (c_data_location, filenameinvoice, 'W');
  fileidlog: = UTL_FILE. FOPEN (c_data_location, filenamelog, 'W');

  UTL_FILE. PUT_LINE)
  fileidinvoice, v_telco | » '|| v_comp | "|" | v_csa_prefix: "| v_csa_type);

  What are you trying to do here? For example, what you're trying to put between c_comp and v_csa_prefix?

  -the content of the file-

  ISCC M4 DP

  =====================
  I want to remove the space between the chain above for the content of the file should look like this:

  -the content of the file-

  GCSIM4DP

  If you don't want space, then only concatenate all the spaces in the string before you write it and REPLACE allows you to delete all the spaces that have been copied from p_csa. For example:

  UTL_FILE.PUT_LINE ( fileidinvoice
              , REPLACE ( v_telco || v_comp
                                      || v_csa_prefix
                            || v_csa_type
                     , ' '
                     )
              );
  

  I guess you need the v_comp of separate variables, the v_csa_prefix and the v_csa_type for something.

  I hope that answers your question.
  If this isn't the case, after a complete script that people can run to recreate the problem and test their ideas. Display the results you want (in other words, the contents of the file created).
  Always say what version of Oracle you are using (for example, 11.2.0.3.0).
  See the FAQ forum {message identifier: = 9360002}

• A string into the text and numbers using SUBSTR and INSTR

  I have the sample data. I know it's terrible database designed for a combination of text and numbers in the same field, but I can't change the business process.

  That's what I have so far:

  set linesize 5000
  
  WITH table_data
       AS (SELECT 'R: JASON BOURNE 12341560' str FROM DUAL UNION ALL
           SELECT 'R: FATS DOMINO 23432342' str FROM DUAL UNION ALL
           SELECT 'R: MARTIN LUTHER KING 3334156' str FROM DUAL UNION ALL
           SELECT 'R: TOM CRUISE 6547123' str FROM DUAL UNION ALL
           SELECT 'R: TOMMY DE GROOT 1212124' str FROM DUAL UNION ALL
           SELECT 'R: GRIM REAPER 1345245' str FROM DUAL UNION ALL
           SELECT 'R: DOCTOR DEATH THE FIRST SMITH 24356178' str FROM DUAL)
  SELECT str
       , TRIM(SUBSTR(str, INSTR(str, ' ', 1, 1), INSTR (str, ' ', 1, 2) - INSTR (str, ' ', 1, 1))) first_name
       , REPLACE(SUBSTR(str, INSTR (str, ' ', 1, 2)+1, 999), SUBSTR(str,LENGTH(str)-6,7), '') last_name
       , SUBSTR(str,LENGTH(str)-6,7) emp_num
    FROM table_data;
  
  STR                                      FIRST_NAME    LAST_NAME                 EMP_NUM
  ---------------------------------------- -----------------------------------------------
  R: JASON BOURNE 12341560                 JASON         BOURNE 1                  2341560
  R: FATS DOMINO 23432342                  FATS          DOMINO 2                  3432342
  R: MARTIN LUTHER KING 3334156            MARTIN        LUTHER KING               3334156
  R: TOM CRUISE 6547123                    TOM           CRUISE                    6547123
  R: TOMMY DE GROOT 1212124                TOMMY         DE GROOT                  1212124
  R: GRIM REAPER 1345245                   GRIM          REAPER                    1345245
  R: DOCTOR DEATH THE FIRST SMITH 24356178 DOCTOR        DEATH THE FIRST SMITH 2   4356178
  
  7 rows selected.
  

  I need to:

  1 extract the first name - which is always the first name after the 'r' - I've got that little works very well.

  2 extract the name - should be the last word before the number, if e.g. for the last night, I wish only that 'SMITH' and 'KING' for the 3rd line and "GROOT" for the 5th line.

  3. remove the number at the end, regardless of the length - some of the examples above are 8 long numbers so my attempt above does not work.

  I can't use any REGEXP or REGEXP_SUBSTR because they are not registered in the EUL I'm using discoverer, I can only use INSTR AND SUBSTR.

  I was wondering if someone might be able to help please?

  Any advice much appreciated.

  Thank you

  AW, go on them, as it's Christmas, I'm feeling generous...

  SQL > ed
  A written file afiedt.buf

  1. WITH table_data (SELECT "r: JASON BOURNE 12341560' DOUBLE UNION ALL STR ')
  2. SELECT "r: FATS DOMINO 23432342' str OF DOUBLE UNION ALL.
  3. SELECT "r: MARTIN LUTHER KING 3334156' str OF DOUBLE UNION ALL.
  4. SELECT "r: TOM CRUISE 6547123' str OF DOUBLE UNION ALL.
  5. SELECT "r: TOMMY GROOT 1212124' str OF DOUBLE UNION ALL.
  6. SELECT "r: GRIM REAPER 1345245' str OF DOUBLE UNION ALL.
  7. SELECT "r: DOCTOR DEATH FIRST SMITH 24356178' FROM DUAL str.
  8                     )
  9 select substr (str, 1, instr(str,' ')-1) as a first name
  10, substr (substr (str, 1, instr(str,' ',-1)-1), instr (substr (str, 1, instr(str,' ',-1)-1),' ', 1) + 1) as last_name
  11, substr (str, instr (str, ' ',-1) + 1) as emp_num
  12 years of (select replace (str,'R: ') as str)
  table_data 13
  14*        )
  SQL > /.

  FIRST_NAME LAST_NAME EMP_NUM
  ---------------------------------------- ---------------------------------------- ----------------------------------------
  JASON BOURNE 12341560
  FATS                                     DOMINO                                   23432342
  MARTIN                                   KING                                     3334156
  TOM                                      CRUISE                                   6547123
  TOMMY                                    GROOT                                    1212124
  GRIM                                     REAPER                                   1345245
  DOCTOR SMITH 24356178

  7 selected lines.

• What is the difference between the string and the string of bytes?

  Hello

  RAW data type is used to store binary data or byte strings. What is strings of bytes?

  
  

  I'm also confused about binary data. We can store images, sound, video, in the form of binary data. All types of data, we can store when we say it can store binary data.

  Thank you.

  I agree with you that the documentation is confusing on this point. RAW stores the bytes of data. I guess that the author of the documentation was trying to make the point that you can store strings of bytes in a RAW, and that (as mentioned in the same document) data are deemed bytes and not characters, so that there is not any character translation.

  Best to think of RAW as just a "bunch of bytes", or a mini, all BLOB as a VARCHAR2 is a mini-CLOB.

• Use iCloud settings shuts off when I opened the Pages and Numbers

  I have docs Pages and Numbers in iCloud (no road to iCloud) I want to access. There, they were stored on my old iPad 2 current running iOS 7.1.2 2.2.2 Pages and Numbers 2.2.2. I do not use iCloud Drive, just the 5 GB of storage free iCloud.

  On my new iPad 2 Air 2.6.2 performer 9.3.2,and 2.6.2 and number Pages when I opened two app, their desktop computers do not show the docs to iCloud. When I go to the settings in the applications of bot and activate using iCloud, as soon as I open an app, when I look in settings, with the iCloud button automatically turn off the coast. The only pop-up menus to choose from for iCloud on the new iPad 2 Air must use iCloud Drive, which I don't use.

  Is there a certain limitation in these apps that only allows to use iCloud drive and not the 5 GB free iCloud I use?

  Tips on how to connect to these docs Pages and Numbers in iCloud on my iPad 2? I know that I could email them to me, but that would be a lot of work.

  You do not use more of your space free storage on iCloud by using iCloud drive. iCloud Drive is simply the latest, most updated to access your documents in iCloud iOS 9.

  I suggest to turn it on and use it.

• The letters and numbers are properly, am I not a compatibility issue? Is there an adjustment for this? My computer programs and explore are ok.

  If I move the cursor over the letters or numbers that they snap up bright. In about 30 seconds, they return to the hazy State. This only happens on Firefox. not to explore or my regular computer programs.

  This can be caused by incompatible Firefox with your graphics card driver. To test this theory, try to disable the use of Firefox hardware acceleration of graphics and fonts.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It will take effect after you exit and then restart Firefox.

  Any difference?

• Error 0x80040E57 then store the date and time to the database

  Hello

  I'm using Labview 2009 for storing the date & time of microsoft database but I get an error (0x80040E57), which specifies that the field is too small to accept the amount of data, I'm trying to enter. A screenshot of the error message and the VI is put in an attachment. Please suggest a solution for this.

  Thank you

  Guilhem

  Hi Marion,.

  I looked a bit in question and found that the error occurs when one of your columns of database is too small to contain the data that you are trying to (see page 236 of this PDF). The data initially a problem is going to be one of the strings that you are trying to insert. I guess you circled in red is the origin of the problem.

  I found a client who had a very similar problem. Here's how, he said, he has solved this problem:

  I found the problem. The problem that you said was in the database. The "Date" column in the database table has been specified to enter 9 characters only. So when I ran the program on 12/02/2011 it ran for a week until 2011-12-09 23:59. So 2 to December 9, the total for the date format characters were 9 (if you add them) but as soon as the date changed to 12/10/2011 at 12:00 midnight the total number of characters were 10 (more than 9) and that's why he stopped at 23:59 on 09/12/2011. I changed the number of characters to 10 now and its working very well.

  Then you can check your database to make sure that it is large enough to accept this entry.

  I hope this helps.

  Trey Keown

  Technical sales engineer

  National Instruments

• Analyzes the string and extract the string delimiter

  Hello

  Basic questions.  Is this possible with the scan of regular expression of the string to extract the string that are in the specified delimiters.  Here is an example:

  Name of the \\Name of the folder 1\Name to the folder 2\Name to the folder 3\File

  Chain analysis can produce the following by specifying the regular expression on the right:

  1 folder name

  Name of the folder 2

  Name of the folder 3

  File name

  I tried \\\%s\\%s\\%s\\%s but the %s stops on the first white space.

  Thank you

  Michel

  RavensFan suggested the service appropriate for your condition, but you can also use an alternative, which is "spreadsheet of array of strings.