Color HP LaserJet Enterprise 500 M551dn - USB port for optional devices

Similar Questions

• How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

  How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

  What host name that I can use?

  If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

  What server SMTP should I use in this case?

  I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

  Thank you...

  I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

  Scan and send (e-mail, send to folder, digital sending, etc..)

  Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

  Simulations of MFP - digital send

  If these don't work, please let me know and I will continue to search it for you.

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• USB ports not recognizing devices

  USB ports for laptop Toshiba Sateliite do not recognize camera or other devices?

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  For a laptop, using a real computer shop (no leeks and glances at a Best Buy or other large surfaces)
  Stores) or system manufacturer support.

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP LASERJET ENTERPRISE 500 COL: Looking for Transport P/N kit

  Can anyone help 'em understand the part number for a package of transport for this printer?

  On the former, I got labeled RM1-8141.
  However when I go through hp partsurfer I'm not find this part.

  So I'm having a hard time to order the correct replacement.

  Thank you

  This is a color LaserJet Enterprise m551dn.

  With this information, I found this information:

  CC468-67927 CC468-67907 ITB transfer kit for HP Color LaserJet CP3525 CM3530 M551 M575 series

  Please verify that the part number I found, this is actually what you want, with the part number, it should be easy to find a picture.

• USB ports for a computer to flag a6750t does not

  None of the USB ports on my computer a6750t Pavilion are recognized by the Windows Vista operating system.  Here are things I tried to correct the problem.

  1. Updated the driver. This is the message I get when you try to update the drivers.
  2. Uninstall devices
  3. Restore the system in time
  4. Downloaded and installed the "Chipset Intel Original pilot" from the HP site.

  Does anyone have a recommendation on what to do to recover the USB drives?

  The only items that should be uninstalled were the ones called 'USB hub root'.  This is the driver that you need to install.

  If this does not resolve your problem, I suggest making a backup of your personal data and do a system restore.  Here's aguide to help the recovery.

  Please click on "BRAVO Star" if I helped you and click on "Accept as Solution" If your problem is resolved.

• V5 - 573 leaves g USB port not recognize devices

  Hy. my USB port left I does not. It's loaded, but not to recognize the devices. tried it with the mouse, usb, external hard drive, flash drive all numb. but the power is there. I see the light on the external hard drive if pluged in. any suggestions? TNX

  Well, guess you should contact technical support now. Sorry mate.

• No virtual USB port printer and device option think its an IEEE 1284.4 print media device

  I read a number of threads and can still not my problem fixed.  I have a Dell box running Windows XP SP3 and tries to connect to a printer of labels Zebra GX420t via a USB connection.  He was not to recognize the printer and I think I inadvertently he associated with the generic IEEE 1284.4 printing support driver.  I really need a usbprint driver.  Now, whenever I connect the printer, I get the yellow symbol in the Device Manager and I do not know how to change the driver to a USB driver.  I plug the printer even in my Windows 7 box and it uses a virtual USB port and the same thing happens when I plug it into my laptop running XP SP3.  No virtual USB port is an option on my desk.  Any thoughts?

  Just to close this thread...

  I ended up using the original XP Pro disc to 'fix' the corrupted files.  It was a disc of SP2, so I had to make all the updates to get back to where I was.  NA not losing all the data (which was nice).  Once all updates have been made, I plugged the printer without loading all the drivers and loaded.  Looked in Device Manager and it was listed as a USB Printer Support under USB device.  When I looked in the server properties/Ports, there was my virtual USB device I was hoping.

  I finished loading the drivers updated from a 3rd party (Seagull Scientific... well known for printer drivers label for most of the large manufacturers) and then deleted the old set to the top.  Once again, everything is good.

  Other corrupted files, I can't explain it all.  I had already reloaded the USBPRINT.sys and the USBMON. DLL and that didn't fix it.  Glad everything is good.  All else fails, start over.

  Thanks for the help.

• USB ports for laptop Dell Inspiron recognize devices under Vista

  Hello.  I'm having a problem with the USB ports on my computer.  It's a laptop Dell Inspiron with Windows Vista.  From one day to the next the USB ports stopped recognizing any material.  I tried the system recovery and restart the computer, but it does not work.  The USB ports will not recognize anything I plug into them.  Help, please!

  Hello

  This could be a hardware problem and you would need support from a real computer store
  (not the leeks and the glances at a BestBuy or other BigBox store) or Support of Dell.

  Verify / Setup (BIOS/CMOS) often F2 settings when you start then look at the screen - make sure that USB is
  permit.

  Check with Support Dell, online resources and forums (for known issues).

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  --------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• USB port recognizes the devices once they work momentarily.

  I have a zune and it has worked well for over a year. Suddenly the usb drivers only recognize the device for about a minute and losing the device when I try to sync saying that it can not recognize the device. How can I get the usb ports to read normally?

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• USB port stopped recognizing devices!

  My USB port just stopped recognizing devices more. Whenever I have troubleshoot the problem it says driver Intel (r) 5 series/3400 series does not work. You must reinstall it. I do it but things remain always the same. Everything on my laptop is now up-to-date.

  Update: my USB problem was solved by freezing Asus USBbooster and disabling Asus power management. After unstalling the USB drivers and restarted, the drivers were automatically reinstalled by Windows and everything was working properly.

• HP LaserJet Enterprise 500 color MFP M575dn

  I have just installed a HP color laserjet mfp575dn.  I could finally get the printer screen to show printing of the USB option but not the option "save to USB.

  No idea how to activate this feature?  This printer is connected via usb and want him to be able to scan to PC.  I see that there is a scan to network folder option but in any directly to PC via usb?

  Hey wes808,

  Welcome to the HP Forums!

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .

  Concerning

• LaserJet Enterprise 500mpfm575: can not find the server. and cannot print wireless HP LaserJet Enterprise 500 M575 MFP color

  
  

  I rebooted the phone. Still no luck.

  I downloaded the HP eprint app and that the app has not found the printer automatically, so I had to enter in the INVESTIGATION period.

  I wonder what happed initially, maybe hackers, I don't know.

  Anyway, thanks a lot for your help!

• Problem with HP LaserJet Enterprise 500 MFP M525

  Hello, I have a problem with my printer LaserJet. 49.38.11 error on the printer and it rebooted several times. Can you help me with this?

  P.S. This thread has been moved from LaserJet MFP and all-in-one - HP's Forums moderator

  Maybe a "corrupt" impression containing poorly formatted PCL who cannot deal with the trainer.

  If you unplug the printer from the network and USB (if applicable), then poweer-cycle of the unit, the same thing happens?

  If so, this would imply a flaw with the printer.

  If this isn't the case, it implies that a rogue print job is sent to the printer each time that it is powered - on, which causes a fatal error in the printer, which restarts automatically, and the process then begins again.

• Install a printer LPT1 HP LaserJet 4 L printer USB port in Windows 7

  Before this "incident", I was able to print from my HP LaserJet 4 L (LPT1 to USB) printer.  I still have the correct driver.

  I was forced to do a clean install of Windows 7 Ultimate and lost the ability to print from my LaserJet.  Windows only allows you to install it as a USB printer, but stop there in recognition.  I need to go beyond that point.

  It was working before and I know it can work again.  I just need help to get there.

  Hello

  I realize has the inconvenience that you are experiencing with the impression. I will certainly help you to question.

  Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  I suggest you check the steps mentioned below:

  Method 1:

  Run Troubleshooter printer and check if this can help:

  Open the printer Troubleshooter

  Method 2:

  Restart the Printer Spooler service and check if that helps.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform these steps.

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 2:

  See the link below and check if it helps:

  Diagnose and automatically fix problems printing and printer

  For more information, you can also check out the link below:

  Solve printer problems

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.