Storm hit home no internet. Help

Similar Questions

• I need data internet help

  I have a HP slate 10 HD 1600us when I bought came with 2 years free T-Mobile data plan, but it will not connect please help

  Follow the instructions in the box!  There is a sticker that has the following instructions:

  1. once the installation on the Tablet, select the settings icon in the Apps folder.

  2. in settings, turn off the wifi radio, then press the button "Home".

  3. Select the icon of the Chrome browser and when it opens, type a URL.

  4. you will be re-directed to the T-mobile website.

  5 activate and register your free mobile Internet service.

  For more information or questions, go to hp.com/go/freemobility

  If you don't get redirected, check to see if the 4G has been power - off go to settings/data usage / and seek to change the "Mobile Data".  Remember, it is reversed on the use of 4 G radio.

  BE INFORMED!  You get only 200 MB of data per month!   It's not much, and using more can incur big charges.  Use wifi at all times when they are available...

  HTH,

  WyreNut

• My laptop shows connected but wireless "no Internet" - HELP!

  I'm on Win7 Home 64-bit edition. I am normally connected by wireless internet. However for the reasons today, I couldn't access the Interior.

  My wireless connection shows that I am connected. However, it also shows the status of 'no Internet' and I couldn't access the internet, well. I tried diabling and then allowing the wireless connection, but the problem persists.

  Please help, all...

  Hello

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  -------------------------

  In genral.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration. Jack-MVP Windows Networking. WWW.EZLAN.NET

• Storm 9530 emulator and Internet connection...

  Hello everyone...

  I downloaded the emulator for the Storm 9530 phone...

  My problem is that I can't connect to internet...

  what I need Virtual PC or Virtual Server installed to use a virtual connection?

  use the emulator to test my new BES 5.0 installation and search for errors

  I can help...

  BTW: am all new to BlackBerry systems...

  You must run the MDS Simulator simultaneously with the BB Device Simulator.

  You can get it here: Simulators of Blackberry

  As you are a beginner please visit this link:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=13264&jump=true

• A freezing Storm blackBerry smartphones... help!

  I'm a convert of Treo in the world of BlackBerry and I thought that the storm is the way to do it.  In any case, after getting the telephone, connected to my corporate email server and downloading some apps, I run on the problem where scrolling and tapping are just frustrating me no end!  For example, when you try to scroll through applications, it just freezes on me and won't do anything.  I can press 'End' and it brings back me to my home screen.  Then, I tried to get into the phone to call Verizon to see if I could get help.  hen tapping/press the 'Contacts' icon, nothing happens.  OK, press harder.  Still nada!  OK, so I'll just type the number manually.  I press the 1 and 5 rises.  I press the 1 and 5 another appears.  I try to change where I am pressing on in the hope that I can get a 1 appears on the screen.  Nothing!  I had 3 seconds to throw this thing out the window.  I know that the BlackBerry is far superior than the Palm Treo but I want to tell you, I was contemplating going back to Palm.  I don't want to give up and hope that there is someone out there who can help out me.  Thank you!!

  Tim

  OK things more to check...

  How did you leave apps when you're done? If it's with the back or on the red button, then the app is unable to close properly. Always use the BBKey and "Close" or "Exit" to exit the application when you are finished. Only if you have a reason to keep it running, you must use another method to exit an application. If left to themselves, many apps will remain running, and just like a PC, more you ask him to do at the same time, him more bogged down it will receive.

  Something to watch - free memory of the App. Options > memory, check the free AppMemory immediately after a restart of batt-pop. Then watch an it... If he's dropping like a stone, then something is running for consumption.

  You can always check what apps are underway into the BBKey - he will always phone, home screen, BBMessenger, Messages and browser running... everything else is an application that has not closed. Be very frugal with allowing applications to stay running.

  You can also search the QuickPull... a version is free on the AppWorld. According to a schedule, it will be a reboot which is almost as good as a proper reboot batt-sweater. I have mine work every night at 1130 hours... longer, with the paid version (which I have), it will monitor the memory of the app and ask me if I want to restart when it reaches a set threshold.

  The thing we want to avoid is an OS reload... who is the most radical, and we need to reduce the other elements of first possible causation (IMHO).

  Give these things a try and report.

  See you soon!

• browser can not connect to the internet-help!

  Running A Dell 3000 desktop with XP.  After a reasonably stable relationship, my browser does not open an internet connection.  I tried IE and Firefox, neither of which work. When I try to open the browser, I get "connection to the 207.46.250.101 site." and then the browser tells me that it cannot open the web page. Operation of the fine to send and receive Outlook e-mail.

  The connection is through Motorola modem and router D-Link.  My office is connected to the router which is connected to the modem.  Other home computers (wired and wireless) continue to work well on the same modem-router, set up.  Comcast tech support was not able to help.  We went through recycling, ipconfig, ping, etc.  I bypassed the router by attempting a direct connection to the modem - same result.  It seems that the router and modem are in order and the problem seems to be with the office or the software.

  I tried to restore the system to an earlier time when the problem started, which did not help.  I have no restore points more early to get to the system restore.

  I got the following message with attemtps have failed to get on the internet: "Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.  Check the settings of the firewall for the HTTP port (80), HTTPS port (431) and FTP port (21). »

  I have disabled the Windows Firewall.

  Previously, I used zone alarm and uninstalled it, although it seems always on the list Add/Remove programs in Control Panel.  Nothing opens when I double click to open the program.  When I try to remove zonealarm, I get the following message: TrueVector Internet monitor has not been uninstalled.  Uninstall wasn't able to stop the True Vector software services, this will happen if other software uses the true vector engine.  to uninstall zonealarm mare that all other true vector programs have been closed. "I don't know what another program uses TrueVector, or if it has nothing to do with the problem.

  Sorry to be verbose, but it took a lot of time and I wanted to give as much information as possible about the problem.

  any suggestions?  Thank you!

  
  

• Internet help

  Hi Mark,

  For me and a lot of others, the idea of having to be connected to internet to be able to effectively use the Creative Suite is repellent.

  Community aid is one of the problems.

  I can put it to use local help, BUT when I go to the for use first it tries to access the internet and must expire before local help becomes available. What makes 'aid' VERY SLOW and boring. I've been complaining about this for years, but not here Just you found.

  It would be wonderful if the entire suite was a preference "I am not connected to the internet", but since I don't seem to make much progress on it after 3 generations of work with the development team.

  Perhaps Community aid could have such a choice, so we didn't have to wait for the time-out.

  Thank you

  Scott

  Hi Scott: I would recommend copying the contents of your entire CHC directory:

  • Mac OS X: USER NAME (home) > library > Preferences > chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1
  • Note: the downloaded help files are a click down to the Local store > help > en_US; However, the copy of the entire Local store will ensure that all your configuration files, preferences, etc. are migrated correctly as well.

  Once this is done, you can reinstall it on a second machine to either copy the application of AIR above your existing Applications (located in the Adobe folder) directory. Or you can download it here: http://www.adobe.com/support/chc - the application AIR itself is less than 5MBs.

  To each of you out there the Windows folks, here is the equivalent path:

  • Windows: %appdata%/chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1
    (copy and paste the sentence above in Windows Explorer File Manager)

• IM in Firefox on Windows and every time I turn off my concection my Firefox home page internet loses its settings.

  I have reset Firefox several times but each time I have shut down my computer or disable the internet connection, the problem recurs. When I open Firefox, the search bar on the upper right side of the screen has Amazon.co.uk and the Firefox search bar in the middle of the screen has no search engine and Im unable to use it for research.

  I typed in browser.search.defaultenginename

   and it found
  

  Browser.Search.defaultenginename; Google
  
  Browser.Search.defaultenginename, S; Google
  
  SweetIM. ToolBar.Previous.Browser.Search.defaultenginename; Google

  I changed all 3 to Google and now everything works fine. Thank you for your help

• Windows xp and internet help

  I modzilla firefox and internet explorer, but I prefer to use modzilla firefox.  can I both to connect?

  I also need to install windows xp service pack 2 and 3 but my computer doesn't have enough ram so I'm

  attempt to remove unnessasary programs I have.  can someone help me remove these programs or tell me which ones I need

  so my pc will work properly?

  (but helped me free of charge)?

  Hi Jennymc01,

  RAM and hard drive are two different things. As I understand from your post you don't have enough space on the hard drive. To make more space on the computer, you can try to delete the temporary files, temporary internet cache, compress old files, swith off hibernation and limit the size of pagefile.

  Click my computer-> right-> properties-> disk cleanup Local disk.

  You will have the option of deleting the temporary files, tickmark where it says, compress old files, click ok. It may take a few minutes to compress the files (you will notice little drop color file from black to blue, but this is indication of compressed files).

  Now click on start-> settings-> Options Internet-> delete browser history-> Ok.

  Click Start-> run, type &-> % temp %-> ok. Select all files and delete - this is all temporary files, you will not be able to delete some files, but ignore those and delete the rest.

  Now, if you have enabled on your system from hibernation disable-> click Start-> settings-> Control Panel-> Power-> Hibernation-> remove tickmark-> ok.

  Find the swap file must be set to managed windows-> click Start-> settings-> Control Panel-> system-> advanced-> virtual memory-> change-->-Advanced Online Performance-> select your drive-> select "System Managed size"-> click define -> Ok.

  Restart your pc and check free space.

  If you do not plan to uninstall all installed service pack files, you can delete many files - open my computer-> tools-> folder options-> view-> uncheck "Hide protected files System"-> Yes-> select 'show hidden files and folders'-> ok.

  Let's go to C:\windows. You can delete all files named $NtUninstallKB $ (number) .

  I hope this helps.

• a1650e can not get on internet, help!

  I have an a1659 who has been wiped clean.  I have install3ed Windows XP SP2 on it.  I can't connect to the internet.  I opened the Manager of peripheral and on "other devices there is a big question mark yellow.»  in 'Other', there PCI bridge device with big yellow question mark on it.  I checked my cable modem and the cable in him, both were good.  the "other device" didn't say what it was, which makes it or any other information.  What can I do to solve the problem?  do I have to download the drivers for this device of bridge or can I delete it?  everything seems to work ok on my PC but I can not get on the internet.  When I press that is a page comes up saying that 'this page is unavailable' HELP!

  Have you installed the Nvidia lan driver?

• COMMAND LINE PROBLEM: HP Pavilion a6703w, garden variety, Vista Home Premium. Help, please. I thank very you much.

  I have a HP Pavilion a6703a.  Garden variety, running VISTA HOME PRE.

  I tried runing a v/chkdsk/f to the command-line (of course).

  I get a message back that says I can't do that;   What should I

  to do this at a HIGH LEVEL.   I don't know what it is.   This is not

  on my DELL 5100 Tower, XP Edition family current version.   Help me, please.

  BUZ/GROVE, OK

  Hello

  Thanks for posting this question in the Microsoft Community.

  I will certainly help you to get the matter sorted.

  1 are logged as administrator?

  2 are you faced with any show related questions?

  3. are you aware of any recent software or the hardware in the computer changes?

  HIGH LEVEL means administrator privileges.  To run the command with elevated privileges, follow the steps.

  (a) click Start

  (b) type CMD

  (c) right-click on CMD , and then click run as administrator

  (d) type the command to run.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Cannot access Internet - HELP

  Get "Internet Explorer cannot display this page" since Saturday afternoon. I went through the usual steps of my router off anf then turn on. Did not help at all. Finally contacted my ISP (Verizon) who told me that the problem was with Microsoft and a recent update, they did. It seems that they got anumber of customer calls. The upgrade fails to recognize my IP address... I was told to contact Microsoft to see if they could come back to me in time before the upgrade to see if it could restore the internet connection. I am at a total loss, as I'm not that Tech savvy when it comes to such things. What can I do?

  Hello

  It is not Microsoft.

  These are public Forums set up by Microsoft on their servers and animated by them.

  We are mainly Windows users help each other here.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Problems in the system due to the storm and perhaps a little help from me not knowing what to do, but try anyway.

  Detail the answers because I'm not a computer expert... Had a storm and several problems have emerged... Constant reminder that the backup recovery D is almost full... can not delete files or do not know how... language file failed for Dell dock, but it shows no access to dell don't dock because it's on a CD that is not available... the failure of this type appears for some other applications such as... Microsoft Works Task Launcher had shortened several SINGLE then icons at the top of the screen for games , email windows, internet explorer, Recycle Bin and work of microsoft: they are gone. Am able to still navigate, browse and navigate using the icons in start, all programs section. Computer works very well done otherwise, a diagnosis of equipment through Dell and it was all ok except it showed the OPU TEST - not taken in charge and PLATEAU in the TEST - not supported. Do not have a contract for coverage with Dell. Y ' All are my choices before paying for the repair and answers... I am a 70 year old and not really rich.  Thanks in advance for whatever you can do.

  JERRY BERRY

  Hello

  It's your drive D: Recovery being almost full messages.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here is some information on the forums of Dell on the Dell Dock.

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19317553/19639432.aspx#19639432

  You can try to download and install it again.

  http://www.DellDock.com/

  "has several icons shortcut SIMPLE click anywhere at the top of the screen for games, windows messaging, internet.

  This should be the Dell Dock (see above link DellDock.com.).

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  For problems and test results from Dell diagnostics the best assistance would be the Dell forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Product key of Winvista32homeedition changed without my knowledge; activated, but won't change original key. No microsoft office. Windows Vista Edition Home Premium. Help please.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - HDRKF - YPVG3-CYGD8
  The Windows Product Key hash: 4YjM/ziu4IHEmc319kaJdFt + dNQ =
  Windows product ID: 89578-OEM-7412806-82641
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {E6FE0CD1-48A6-4EF5-8658-26B1737D97E0} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6002.vistasp2_gdr.101014 - 0432
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 102
  2007 Microsoft Office system - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E6FE0CD1-48A6-4EF5-8658-26B1737D97E0}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-CYGD889578-OEM-7412806-826418S-1-5-21-3182879500-618548552-3308579643TOSHIBASatellite A305INSYDE2.2020091207000000.000000 + 00043333507018400F804090409Central Standard Time(GMT-06:00)03TOSINVTOSINV00102100Microsoft Office system 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_COA_SLP
  Activation ID: c3505bd0-004a-49b9-84db-a1a4869eddf1
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00148-128-082641-02-1033-6002.0000-1682011
  Installation ID: 008220050270570192225176145456301110847484680760957181
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: CYGD8
  License status: licensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OAAAAAEABAABAAIAAQABAAAAAwABAAEAJJQGD4zK3p0uqdRUMAbokvTROgzy9PIuJux4JqxWRso =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC TOSINV TOSINV00
  FACP TOSINV TOSINV00
  HPET TOSINV TOSINV00
  START TOSINV TOSINV00
  MCFG TOSINV TOSINV00
  ASF!   TOSINV TOSINV00
  SLIC TOSINV TOSINV00
  SSDT PmRef CpuPm

  All subfolders and files - it puts all the flags to their default state (sorry for the omission here!)

• Internet help blackBerry Smartphones

  Hi, I just want to ask that my internet connection has to do with facebook photos of loading because I use edge and wifi will help load/Fisher photos

  Yes, your Internet will certainly affect your download speed.

  WiFi will be a huge advantage over the edge.