Storm 9530 emulator and Internet connection...

Similar Questions

• Satellite Pro C665 and internet connection problems

  Hi, will try and give as much information as I can, so sorry for the long post.

  I bought this new laptop in August is so very old, I connect to the internet with modem USB 3 G telstra and a cycle of 3 weeks he began to abandon the connection within 30 seconds approximately.
  The blue LED on the identification of the USB modem still flash, it has a connection, but I would get the yellow explanation mark on the icon of internet connection in the task bar.

  Now, the only way to recover the connection must close the connection of Telstra, unplug it, plug it back in and reconnect, a few times I have to reboot and will have to go through this routine 5 - 6 times and sometimes up to 10 attempts before I get a stable connection.

  So first I thought it might be the USB modem, so I got a replacement of telstra, but made no difference, then I had a replacement sim card and still no luck.

  Then I did a new install of Windows 7 and installed all the current updates, still no go.

  I then bought a wireless router to eliminate the USB connection and still have the same question.

  Sometimes it can be very frustrating trying to get a solid connection, but once it gets a good connection, it will stay connected for hours without any problem

  I'm not an expert with computers, but can usually find a solution to problems of software, I have, but that left me speechless and I think I've covered most of the region to address this.

  Thanks for your time.

  Unfortunately I can't say anything on Telstra 3 G USB modem. Toshiba doesn't support third party hardware, software and does not offer any kind of support.

  I put t know where you got this USB modem but I m wondering you didn't visit their store and test in functionality it bring your laptop with you. The people who work there could make inspection on site.

  I also put t know why you have this problem at home. Your router is not known to us, but is there a difference when using WLAN secure or unlocked and without password?

• Bluetooth network and Internet connection sharing problem

  I am putting in place a network via Bluetooth between two computers later with Toshiba Stack installed and to share the Internet connection with the second computer.

  On the computer of trees I put Internet connection sharing, and for this reason, it automatically assigns addresses TCP/IP for the Bluetooth Personal Area network (192.168.0.1).
  On computer 2, I put everything to get it automatically. Firewall (Kaspersky) disabled.

  When I connect 2 Bluetooth devices, everything looks fine, the 2nd automatically gets the IP address, I can ping both computers and Internet works also on the 2nd computer, for a few seconds! After that, it appears as the 2nd computer is disconnected from the network... what could be the problem?

  In the case of the observer under the System tab, I found information like these:
  2nd comp:
  The system has detected that the network \DEVICE\TCPIP_{E44D18EB-91F5-4 adapter has been connected to the network and launched a normal operation via the network card.

  The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.

  and the 1st model also appears this:
  The system has detected that the network Bluetooth adapter... Area Network - Packet Scheduler Miniport has been disconnected from the network, and the network adapter configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

  In your case, I would look at the following Web site:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists the following document:
  "Internet on PDA via PAN using Notepad as a gateway."
  In your case, the PDA is another laptop, but the procedure should be very similar.
  I would check the firewall settings later if it still does not work.

• Windows 7 - updated interfere with anti-virus and Internet connection

  Windows updates frequently stop my internet connection. It's using windows7 with a wireless router and a cable modem broadband. Updates have also stopped my work (Norton) security protection. What can I do to stop what is happening or is it Microsoft?

  Hello

  1. when exactly it happens? After you install a particular update?
  2. this happens whenever you install a windows update?
  3. the updates you are trying to install? http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Step 1: You can try to install the windows updates in the clean boot state and check what is happening.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps in step 1 in the article to put your computer in clean boot mode.

  http://support.Microsoft.com/kb/929135

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:
  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• printer deadline on 1 computer in local network and Internet connections

  Windows 7 ultimate 32 bit running. Just a week ago I experienced a problem to stay connected to the internet and my printers. There was the time I surpassed all in answering emails, times when I was on FaceBook, e-mail does not seem serious if I am in outlook or on the host IP page. The only remedy I have is to restart and start all over again. I tried to use "last" of 2 months without change. Any ideas on what is the cause? Should I reinstall windows? Can I do a repair said from another machine running ultimate? Not sure that I trust a repair disk from the machine that is time.

  -the dangerous Dan McGrew

  Expired A while trying to ask 5 minutes ago.  Grow old...

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problems with an internet connection in Windows 7.

  I imagine the inconvenience that you are experiencing. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Intermittent problem with IP addresses and internet connections dropped

  Once a day or so my PC (Win7) will not be able to access the internet. Connection just drops. I use DHCP for IP addresses.

  As far as I can see in the Event Viewer I get these types of errors "the address lease IP 192.168.1.64 for the network card with network 0x406186808C4C address was rejected by the 192.168.0.1 DHCP server (the DHCP server sent a DHCPNACK message)."

  My local network is simply: PC-online router (Cisco E1200)-online internet (modem Siemens SpeedStream 4100 DSL)

  "When this happens, we run ' ipconfig - release 'then' ipconfig - renew." This usually fixes the problem. Sometimes, this does not solve the problem, and we need also the modem power cycle. In a few minutes find us the internet connection. It's nice to have a manual correction, but we want to solve this problem to happen... as is the engine of our family crazy...

  The address LAN IP of the modem is set to 192.168.0.1

  The address LAN IP of the router is set to 192.168.2.1

  When things are running OK, I usually see it in the ' ipconfig-all the ' results: = 192.168.2.147 IPv4 address (Preferred) [but the IP numbers change slightly] my understanding is that see "Present" in the result is a good thing (but I don't know why...).

  Any thoughts on what is happening? and how to permanently solve this problem?

  I'm also confused on IPv4 and IPv6. Should I be concerned with any information of IPv6 in the ipconfig-all the results?

  Thanks for the help

  Talked with the ISP (ATT). Zig - zag, you were on the problem. I had both modem and router set to DHCP mode... so I had some conflicts. The solution was to define the "bridge mode" dsl modem and configure the router to "PPPoE mode. Everything works now. Thanks for your help.

• 6525 - resettlement and internet connection problems Deskjet

  Hello

  yesterday I managed to install my new printer hp deskjet 6520 (5) on my HP Pro 3520 (AiO) with win 7 - using a wi - fi connection. Then, I also installed the printer on my laptop (sony vaio) - also use wifi. The two communicated yesterday with printer. But I have not tried to use brought down PC after install portable printer

  Nevertheless, today HP 3520 Pro could not have communicated with printer. Software repeatedly said the printer cannot be connected to the PC (while printing through the laptop was ok...). No miracle has helped so I decided to uninstall and reinstall the printer.

  I've uninstalled it successfully but when I try to use the hp guide software installation (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-122330-1&cc=cz&dlc=cs&lc=cs... he just said initially that I am not connected to the internet... Although I have no problem with the internet connection (I even tried connecting cable...).

  Help, please... I do not know how to do this

  Thanks in advance

  It is now resolved... I do not understand this, but when I turned off my laptop, the printer begins to communicate with PC...

  If HP - is there a reason why cell phone (with the installed printer) refuse the communication between the PC (HP Pro 3520) and hp printer deskjet 6525?

• PPPoE and Internet connection

  I just bought an Inspiron from Dell 530 s with Vista Home Premium. I also have Comcast as my ISP. The computer is connected via the Modem Router. I have a computer (XP) desktop and laptop (Vista) that is connected to the router and can receive the internet. However, when I try to connect and go to broadband (PPPoE), it requires a user name and password but the Comcast does not require that.

  I tried a lot of things - turned off Windows Firewall, disable iPV4, the 6 and combinations, but nothing helped. Right now I'm about to take the CD of Windows XP Pro and install it. At least I know it works.

  I would really like this to work with Vista Home Premium but the Internet connection is driving me crazy.

  Any help would be greatly appreciated.

  Thank you

  JohnD

  
  

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• VPN and Internet connection

  When I connect to the VPN on my laptop from home (using a wireless connection), I can't access the Internet.

  Any help?

  Hello

  Depending on the system and its configuration, it is not always possible to solve this problem.

  However, try this.

  Make sure that the default route has NOT changed to the VPN server.

  Open the properties of your VPN connection.
  Go to 'network '. Double click on TCP/IP protocol. Use the button "Advanced".

  Disable the feature from default gateway.

  For the best solution if you are using a cable/DSL router which is also home VPN endpoint you can take the 'Off' the computer VPN.

  Example, http://reviews.cnet.com/routers/instant-broadband-etherfast-cable/4505-3319_7-20292080.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• After the Windows 7 security updates, my wireless and internet connections have been disabled

  the last batch of security updates have made all sorts of damage to my laptop, the worst was disable my wireless and wired Internet even PC world could not help saying I need new wireless card manage to restore to 6/23/2011before I do it again pack security update has any other body says the same thing it's on 24/6/27/6

  now I have no security on all the Windows Defender and Microsoft Security databases

  Ruth Burns

  * original title - securaty updates held don't need know no securty on now *.

  Hello

  ·          What security update has been installed prior to this problem?

  ·          What happens on a wired connection?

  Step 1: Start the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  See also: http://windows.microsoft.com/en-US/windows7/Use-Network-troubleshooter-event-logs-to-solve-network-problems

  Step 2: Try the other steps in the article below.

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

• Satellite A100-350 and internet connection running slowly

  The internet is very slow and run some applications run very slowly and do not work well. Access Mozilla Firefox is slow. The application 360 off mininova.com sharepro responds No and jams. I never get anywhere with this program.

  This computer behaves like a broken record.
  Anyone have any ideas?

  Download yourself a spyware detect software like "Adaware" and clean your laptop with it.
  I think that it is somehow filled with useless software that runs in the background. You can
  even try to disable some temporary applications such as antivirus and see if you have any improvement.

  Concerning

  chain

• Windows Firewall and internet connection failure

  My Wi-wired connections and no longer work. My window firewall won't start. I now have a message to "svchost.exe. startuo - Application error The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory cannot be: "read" "Any ideas how to solve this problem?

  Hello

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems like you get an error message "svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory could not be read. I'll be happy to help you with this problem.

  (1) when exactly you receive this error message?

  (2) have you made changes on the computer before this problem?

  I suggest you follow the steps to disable Windows Driver Foundation - User - mode Driver Framework and check if it works.

  (a) click Start and select run.

  (b) type services.msc and press enter.

  (c) search for Windows Driver Foundation - User - mode Driver Framework serviceright click Choose Properties in the Startup type and then select disabled.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Updates Windows and internet connection counter.

  I have a 5 GB plan of the internet.  I would take my laptop running Windows 8.1 to unlimited site and download updates to another pc at home;  take home and update offline desktop.  The pc at home operating system is Windows Vista.  If anyone can help with detailed instructions, it will be very appreciated.

  Welcome & thank you for your comments. My previous post as ANSWER marking will officially close your thread.

  

  PS: Wouldn't mind a USEFUL vote while you're there either.

  

• WRT 1900ACS removes wireless LAN file transfers and internet connection

  I have WRT1900ACS which is declining by almost every file transfer wireless LAN I get out of a wireless laptop to a PC connected by cable; So far, I'm using the latest firmware version: 1.0.1.174588 and both are version of Windows 10 PC 1607.

  When I transfer a lot of small files, the transfer stops after about 2-4%, drops wireless connection and the adapter will not reconnect. I have to restart the wireless computer to get the wireless adapter to connect again.

  This would seem to indicate a problem with wireless network card driver. The same id of the event was logged in the forum thread below:

  http://www.techsupportforum.com/forums/f338/Windows-10-wireless-drop-out-1057898.html