STR-DN1040 - pregnant outdoor and the TV volume

Similar Questions

• Is it normal that the screen SE iPhone packed between the button of the vibration and the positive volume button?

  Is it normal that the screen SE iPhone packed between the vibration switch and the positive volume button?

  If it was the impact, where the screen would break. It is normal for a screen to break at the point of impact.

• Button / stop and the down volume button does not

  Hello, I got a G4 bike for less than a month and the power on button and the low volume button are a reagent.

  Hello

  I have the same problem. It certainly isn't a hardware problem, because after holding the power button for about 30 seconds, I was able to reset my phone.
  It works well after the restart.

  Best regards
  Diana

• Satellite A200-1VP - Trackpad and the control volume

  Hello

  for the first time posting here so apologies in advance if I posted this topic in the wrong place or have not included all relevant information.

  My question is about a Satellite A200-1VP I bought recently from a friend. Model number PSAE6E-08D02YEN. The laptop has been completely annihilated and installed Windows 7 Ultimate before being redeemed.

  This seems to have brought the track pad and volume control to stop working.
  Are there drivers available that I could try to help to solve this problem?

  Thanks in advance.

  Hello

  I checked on http://www.toshiba.eu/innovation/download_drivers_bios.jsp Toshiba download page, and as I can see it, your machine is fully supported for Win7 32 bit, so you need to do is install all available drivers, tools and utilities.

  What version of operating system are you using (32 or 64 bit)?
  You have installed all the drivers?

• Firmware update and the playback Volume

  Help!

  I just did an update of the firmware on my Sansa Fuze and I can't hear it more!

  Does anyone know how 'Cancel' the update of the firmware, please?

  Have you seen this thread?

  http://forums.SanDisk.com/T5/fuze/Sansa-fuze-insufficient-volume-after-firmware-update/m-p/139809#M3...

• How can I set up my new tablet to take a snapshot using the windows logo and the low volume of screen button?

  Acer Iconia W700 tablet with Windows 8.

  Try to follow the first option on this page, but nothing is happening: http://windows.microsoft.com/en-us/windows-8/take-a-screen-shot

  Acer Iconia W700 tablet with Windows 8.

  Try to follow the first option on this page, but nothing is happening: http://windows.microsoft.com/en-us/windows-8/take-a-screen-shot

  Hello

  Read the Notes at the bottom of this page.

  "Some laptops and other devices do not have a PrtScn key or may use a different key combination to take screen captures." Consult the manual that came with your laptop or your device for more information. ''

  Go to this site and select your model for specific help.

  ASUSTeK Computer Inc. - Support - Troubleshooting:

  http://support.ASUS.com/download/options.aspx?SLanguage=en&type=9

  You can also discuss this issue with other users that have this template.

  ASUSTeK Computer Inc. - Support Forums:

  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  Concerning

• My STR-DN1040 will not power "on".

  Yesterday, I bought a brand new Sony STR-DN1040 at Best Buy.  I came home and hung it through Monster THX HDMI for my Sony KDL-52XBR9 HDTV cables, my reader blu - ray Sony BDP-BX57, 52 '' my box of cable Motorola DCX3510-M and my Polk Audio 7.1 surround subwoofer and satellite speaker system.  I have connected the STR-DN1040 via ethernet to a cable modem, which is located in the same rack as the home theater unit. Everything was (is) connected properly.

  I plugged the STR-DN1040 in my Monster surge protector/power strip behind the shelf of home theater. where all other components are connected.  I heard the slight, familiar "click" can be received and activated inside the STR-DN1040.

  I turned on my TV box and cable.  I went to the front of the STR-DN1040 "in office", but the small LED above the power button was already green, as if he (power) on its own.  So, I waited.  And waited and waited... something appears on the STR-DN1040 screen, but nothing ever presented.  I thought that perhaps he made an update of the firmware straight out of the box, but after an hour, it became apparent that something was wrong.  Then...

  I unplugged the STR-DN1040 and let stand for 30 minutes.  I plugged it in and it did the same thing as described above.  The Green LED power 'works' light comes on in a few seconds the power cable is plugged in, unless you press the power button on the front of the unit.  And then... He's just sitting there.  The device does not react to any pressure on the buttons or dials on the front.  The device does not respond to a key pressed on the remote control.  I checked all HDMI connections and even changed the HDMI cables, but I get nothing. Unit seems dead - D.O.A. The green light is 'on' on the front, but that's all.

  Anyone have any ideas what might this happen? Everyone heard about this problem or has experienced this themselves?  Have I not a dud?  Should I just return it and get another?

  I went through this process.  It seemed to work.  Leave the House and came after a few hours and I'm back to the same problem.  Tried to "clear" it, but that never happens.  I held the button for 5 then 10, then 15. No COMPENSATION.  I'm ready to ship in return!

• Is it possible to adjust the sound volume of Windows to more than 100%?

  Hello

  I have a very simple question:

  Is it possible to adjust the sound volume of Windows to more than 100%?

  I explain why I need to do this:
  I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.

  However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.

  Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.

  Please don't tell me to use a software that increase the volume of the file I want to watch VOD.

  Is there a way to increase the sound volume of Windows to more than 100%?

  Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?

  AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.

  As you already wrote the sound level can be increased in combination with Windows and some players.

  Is there any other way to watch these videos, but using WMP?

• Sounds of bells, the sms and the app does not have Moto G

  Hello

  I have a Moto G and for some reason any ringtone, do not work the sounds of sms and app notifications. There is nothing wrong with the speakers on the phone that I can still play music and my alarm still wake up in the morning. When I go to settings, sounds and notifications and move the slider for each audio section, I can hear an audio preview for the media and the alarm volume but won't ring volume. If anyone can help me with this I would be immensely grateful that I rely on my phone for work.

  Thank you in advance,

  Luke

  For anyone who has had a similar problem. I did a factory reset on my phone and this has solved the problem. Bit of a burden, but at least the phone works now...

  Luke

• How to increase the speaker volume?

  Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?

  On Wednesday, April 10, 2013 23:21:42 + 0000, JRHoot wrote:

  Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?

  Have you set the physical volume on the speakers control
  themselves?

  Ken Blake

• CS5 save for Web doesn't let me save in the Windows volume

  I have a Windows Server 2003 volume mounted via the Services for Macintosh (AFP, SMB, no I'm pretty sure). Even if the Mac and the Windows volume can control independent of filenames longer than 31 characters, due to the sustainable management of FORESTS (I guess) I've never been able to record directly from any application to this volume of Windows with a > 31 char filename. This has never been a problem that I kept my short file names.

  After installing just CS5, however, save for Web is not let me save any file, no matter how the nickname: "names of more than 31 characters only are not supported on the destination volume. I can't save for the Web very well on my desktop and save under... the volume of Windows, but not save for Web for Windows volume.

  The save for Web is set to 'Pictures' only (no slices so it's only to create a single file).

  Any thoughts? Known issue?

  Thank you.

  Maybe that's part of what happens (and is not something like our names, internal files or anything else I recognize).

  It's probably something internal to save dialog box (NavagationServicesSavePanel), and it assumes that the file systems will be able to handle the long names.

  Again, via SMB to connect to the server may remove part of the restrictions.

  CS3/4 was based on carbon and used the different APIs for a large part of the file structure.

  CS5 moved to cocoa and has a new set of API files to process.

• Remote control Medai vs STR-DN1040 cannot change the source?

  I just installed my Sony STR-DN1040 home theater receiver and have a few questions about the media remote ap...

  (1) I have it all connected and registered and the ap is functional, but in "remote mode", it lists all entries in my (BD, cable/satellite, DVD, FM, etc) as buttons, I can support on and they light up and make a tone of confirmation on my iPhone 4s, but they do not change the source to the receiver.  The rest of the features seem to work and if I use the media remote ap for go to the GUI menu, I can arrow over 'look' and then select a source, and that works fine.  The problem is when you are in another room and want to power on the receiver, then choose an audio source and play without having to turn on the TV or be in this room, you can't (or at least I can't) because the hot-key source on the ap do nothing.  What did I miss?

  (2) I have programeed the 1040's physical remote to control my Samsung Blu - Ray player.  The Medai remote access point can now also control it, or is the 1040's remote physical a completely separate device?

  Thank you!

  Hello Apcrews,

  The STRDN1040 was intended to be used with the Sony 'TV Sideview demand' which includes many new features and replace the existing approx. remote media TV Sideview will will allow you to switch between inputs, however there is no visual feedback in the app, so you'll need visibility on the front panel of the receiver or GUI.

  The application will not work to control your player of Samsung BD. The reason is that you have programmed the 1040's physical remote to control the player of comic book via codes IR (infrared), these codes resident in actual distance rather than the receiver and the orders are sent directly from the 1040's remote control.

• Why the STR-DN1040 update taking so long?

  Today, my new STR-DN1040 has received an update that you download the package and held in Updating, flashing on the screen because some then only green light flashing update then just green pwr/standby blinking light.

  In short Question why must Sony A / V Receiver so long to update since nearly an hour

  (Update: it finally all 2 hours later, but something weird happen the name of the network device changed some thing I don't set and was not default)

  The update download speed depends on your internet connection. If you have internet high speed (i.e. the download speed of 10 Mbps or higher according to the website www.2wire.com ) and is only used by the AV receiver then it may not take as long.

  What is the new name under the option network device? It's a normal operation that can change after the software update, so it can easily be seen when configuring the network connection.

  If my post answered your question, please mark it as "accept as a Solution.

• A copy of the Sierra of MacOS and travel on the same volume

  I installed a new copy of the Sierra of MacOS, and most things seem to be well-oiled. However, I noticed that when I copy a file and paste it on the same volume, a copy of it remains in the original location. So, by example, if I download a file in the Downloads folder and then copy this file in Documents, a copy of the file remains in the folder downloads. On previous versions of Mac OS x, the default action might have to move the file of Di-ownloads of Documents. Is it possible to recover this feature?

  Another totally independent question is I see also that Terminal does not save orders, after its closure. So if I entered a command then close Terminal, after the reopening, I have to type the same command again. On older versions of Mac OS x, we could simply use the arrow keys to navigate through previous orders. Is it possible to recover this feature?

  Lojix wrote:

  So, by example, if I download a file in the Downloads folder and then copy this file in Documents, a copy of the file remains in the folder downloads. Is it possible to recover this feature?

  On older versions of Mac OS x, we could simply use the arrow keys to navigate through previous orders. Is it possible to recover this feature?

  Try the press / hold down the command key while you click and drag a file from one folder to another. Like El Capitan, this should move the file.

  About Terminal, the up/down arrows always work for me to remind the right Terminal commands like they did with El Capitan.

• I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  If you want your Apple Watch to stay connected to the phone, you need to keep compatible BlueTooth.

  All functions of the phone will use up the battery life. Some things more than others. Screen brightness, low cell signal strength and location services are major culprits. If you are having battery problems, see this article:

  http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-iOS-batter y-drain

  I don't know what it means being out of doors has to do with the question.