insufficient resources when you try to connect. Windows XP

Similar Questions

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• When you try to connect to my router using the IP address, he continues to ask for a password of windows security.

  When you try to connect to my router using the IP address, he continues to ask for a password of windows security.  I don't know what it is, I tried recording with every combination I can think.  Can anyone help?

  If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.

  I hope this helps.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• When you try to connect to web sites like AKO .mil I am now told I have invalid certificates.

  invalid certificates

  When you try to connect to web sites like AKO .mil I am now told I have invalid certificates.  I have connected to this site from this computer several times in the past.  I contacted toshiba technical support and they said I don't have gpedit.msc - Group Policy Editor and need to have installed to solve my problem.  can you help me?

  Hello

  1. What version of Windows is installed on the computer?
  2. What browser do you use?

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/certificate-errors-frequently-asked-questions

  It will be useful.

• ieframe error when you try to connect to yahoo canasta.

  Original title: error ieframe

  Tuesday night, I played canasta to yahoo.  I was not able to connect and play since then.  I get the following error... Please help!       RES://ieframe.dll/acr_error.htm#Yahoo.com, http://games.yahoo.com/games/login2?page=ca&ss=1

  I went to the microsoft website.  I had already cleared cache etc. etc.  I have RESET Internet explore and that got rid of the ieframe error.  Then, I was able to get into yahoo but could not go to a room.  Then, I uninstalled java and reinstalled.  I was then able to go to a room but not to make a table.  I checked the "add ons" and made sure to activate all the java.  I am now able to play canasta to yahoo.  I think that yahoo reset things because others spoke it as and when you try to connect... the screen where you must copy the letters and numbers you see... the page is HUGE and I have to zoom to 75% to get to the screen where I have to watch.  Even this screen I had to make smaller... so I have a few questions to understand.  Thank you for having responded so.

  Hello

  1. do you use the Internet Explorer browser to connect to the mentioned Web site?

  2. If so, what is the version of Internet Explorer?

  3. can you play a different game on the website or other sites?

   

  Method 1: Follow the link below:
  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

   

  Method 2: please follow the link below:

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• When you try to connect to internet it sometimes makes other times it doesn't.

  Sporadic internet connection

  My friend has a very annoying problem with the PC! When you try to connect to internet it sometimes makes other times it doesn't.
  The desktop pc is connected to the router/modem (D-Link WIFI ADSL 2 + G6242) via the ethernet cable, it communicates with the router, but
  not between the router and the net!
  I can connect without problems with laptop wireless, which indicates that the problem is with the Office
  and not the router!
  I suspect that the Office might be infected with malicious software. I've updated all the thing and run Malwarebytes, Spybot
  Search and destroy and Avast AV, nothing malicious is reported.
  I have restored to previous restore points, but the problem persists. It may be a corrupt file but which!
  I would have preferred to resolve this problem, otherwise I'll have to do a restore of the system Dell Factory!
  I'd love to help with this problem appreciate.

  Specifications of the PC;
  PC is connected to the router/modem (D-Link WIFI ADSL 2 + G624T)
  REB PC
  Computer:
  Computer Type ACPI (Mobile) 86 x PC
  Operating system Microsoft Windows Vista Home Premium 6.0.6002 (Vista RTM)
  Date: 2010-04-26
  Time 16:19
   
  OS Service Pack Service Pack 2
  Internet Explorer 8.0.6001.18904
  DirectX DirectX 11.0
  Motherboard:
  CPU type DualCore AMD Athlon 64 X 2, 2600 MHz (13 x 200) 5000 +.
  Card mother name Dell Inspiron 531
  Motherboard chipset nVIDIA nForce 6100-4xx, AMD Hammer
  Memory 2048 MB (DDR2 - 667 DDR2 SDRAM) system
  DIMM3: Hynix HYMP112U64CP8-Y5 1 GB DDR2-667 DDR2 SDRAM
  DIMM4: Hynix HYMP112U64CP8-Y5 1 GB DDR2-667 DDR2 SDRAM
  Type of Award BIOS (09/11/07)
    
  Display:
  NVIDIA GeForce 8300 GS (128 MB) video card
  NVIDIA GeForce 8300 GS (128 MB) video card
  Accelerator 3D nVIDIA GeForce 8300 GS
  Monitor Dell E207WFP (digital) [20 "LCD] (YM30682B6CFL)
    
  Multimedia:
  Audio adapter Realtek ALC888/1200 @ nVIDIA nForce 6100-400/405/420/430 (MCP61) - High Definition Audio Controller
    
  Storage:
  IDE controller NVIDIA MCP61 Serial ATA Controller
  IDE controller Standard dual channel PCI IDE Controller
  Storage controller Microsoft iSCSI Initiator
  Hard drive WDC WD50 00AAKS-75YGA SCSI Disk Device (465 GB)
  PBDS DVD +-RW DH - 16W1S SCSI CdRom Device optical drive

  Network:
  Main IP 192.168.1.2
  Primary MAC address
  Network card NVIDIA nForce Networking Controller)
    
   
  DMI:
  DMI BIOS vendor Dell Inc.
  DMI BIOS Version 1.0.7
  DMI system manufacturer Dell Inc.
  DMI system product Inspiron 531
  The system DMI 00 version
  DMI system number 5NNFJ3J
  DMI system UUID 44454C4C-4E00104E-8046B5C0-4F4A334A
  DMI Motherboard manufacturer Dell Inc.
  DMI Motherboard product 0RY206
  [NVIDIA nForce Networking Controller]
    
  Properties of the network adapter:
  Network card NVIDIA nForce Networking Controller
  Interface Type Ethernet
  Hardware address
  Connection connection to the Local network name
  100 Mbps connection
  MTU 1500 bytes
  DHCP lease obtained 26/04/2010 16:01:26
  DHCP lease expires 26/04/2010 17:01:26
  Bytes received 3931673 (3.7 MB)
  Bytes sent 279120 (272.6 KB)
    
  Network adapter addresses:
  IP / subnet mask
  Entry door
  DHCP
  DNS
    
  Manufacturer of the network adapter:
  Company name NVIDIA Corporation
  Product information http://www.nvidia.com/page/mobo.html 
  Download driver http://www.nvidia.com/content/drivers/drivers.asp 
  Update drivers http://driveragent.com?ref=59

  That's what shows in ipconfig/all, when it does not connect to the internet.
  Although I can connect with laptop computer when this happens on the desktop!

  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\>ipconfig/all

  Windows IP configuration

  Name of the host...:-PC
    
  Primary Dns suffix...:
    
  Node... type: hybrid
    
  Active... IP routing: No.
    
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
    
  ... Description: NVIDIA nForce Networking Controller
    
  Physical address.... : (I have hidden for security)
  DHCP active...: Yes
    
  Autoconfiguration enabled...: Yes
    
  Autoconfiguration IPv4 address. . : 169.254.163.97 (Preferred)
    
  ... Subnet mask: 255.255.0.0.
    
  ... Default gateway. : 0.0.0.0.
    
  NetBIOS over TCP/IP...: enabled

  C:\Users\ >

  Of course, it does not show what it should show such as;

  Lease obtained...:
  Expiry of the lease...:
  ... Default gateway. :
  DHCP server...:
  I tried to reset with the following commands unsuccessfully;

  Start, all Programs\Accessories and right click on command prompt, select "run as administrator" to open a command prompt.

  In the command prompt window, type the following commands, each followed by the Enter key:

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer.

  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Stebex>ipconfig/all

  Windows IP configuration

  Name of the host...: Stebex-PC
    
  Primary Dns suffix...:
    
  Node... type: hybrid
    
  Active... IP routing: No.
    
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
    
  ... Description: NVIDIA nForce Networking Controller
    
  Physical address.... : 00-1A-A0-80-67-76
    
  DHCP active...: Yes
    
  Autoconfiguration enabled...: Yes
    
  Autoconfiguration IPv4 address. . : 169.254.163.97 (Preferred)
    
  ... Subnet mask: 255.255.0.0.
    
  ... Default gateway. : 0.0.0.0.
    
  NetBIOS over TCP/IP...: enabled

  C:\Users\ >
  Would appreciate help please!

  Problem solved by a relocation complete!

• error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

  error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

  I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

  but when connect this device on windows xp pro his works very well.

  but with vista I see this error msg

  The handle is invalid

  any idea to solve this problem?
  Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

  Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• Get the error 0xc00d11cd when you try to connect to applications

  I have a Microsoft Surface with Windows RT and since I got it I could not connect to most of the applications and others cannot access the internet at all.

  When you try to connect to all the apps from Microsoft I still get error 0xc00d11cd (0x82bc0005) and it just says: Please try again.
  This happens in music, video, games and apps Xbox SmartGlass.
  Also I tried multiple games, including all the Xbox games and other apps like Shazam simply cannot connect to the internet or connect to all the.

  Looks like people, email, SkyDrive, shop, E-mail and weather join the end network.
  Troubleshooting my network found no problem

  I tried to uninstall and reinstall applications and making a whole "refresh your PC" without success.

  Any help?

  Hi, jonathons11a
  in fact, this is the case, I had the same problem and he went just by logging on XBOX.com
  I maintain the money account, but the service works well.

  I think that this must be marked replied.

• When you try to connect to a Yahoo link, like yahoo mail, I get (error code: ssl_error_bad_cert_domain)

  This connection is Untrusted

  You asked Firefox to connect safely to we - mg5.mail.yahoo.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.

  You use a bookmark to open this link?

  If you then try to open the page https://mail.yahoo.com/ instead and, possibly, change the URL of the bookmark to delete the foreground we mg5

  It is generally not a good idea to bookmark the pages directly as long as such links to specific areas can become valid.

• Forgotten mini iPad 3 password, so I restored to factory settings, and now, when you try to connect back apple we still wonders of forgotten password!

  Forgotten mini iPad 3 password, so I restored to factory settings, and now, when you try to connect back apple we still wonders of forgotten password!

  If you have forgotten the password for your iTunes account (if you have settings > iCloud > find my active iPad you need to enter the id and password to reactivate the iPad): http://iforgot.apple.com

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Error number: 0 x 80070424 when you try to use windows update

  When you try to use windows update I get this error: error number: 0 x 80070424.  In addition, automatic updates in Security Center is disabled, and I can't activate it.

  RichardTensing,

  Try other steps mentioned in the article

  http://support.Microsoft.com/kb/2509997

  `~`

  http://support.Microsoft.com/kb/968002/>

  `~`

  If no joy, click the round to start, in the search in field type

  cmd

  Right-click on cmd.exe and select ' run as to administer. Follow the prompts to allow the command prompt to run.

  At the prompt, type it below, and press ENTER after * each * command

  regsvr32 c:\windows\system32\wuaueng.dll

  output

  Restart the system and see if it can be updated now.

  04/27 / 1107:46: 36 am