Strange behavior on Fireworks CS4 preview hotspots

Hi all

My students have created prototypes of 10 web pages in Fireworks CS4. Even if they are careful affect the hotspot links that fall below the line of division in the list of links, they see a very erratic behavior when previewing pages in a browser. All links worked views of students before sending me the files. When I consult their files, some work and some do not. I had the students create interactive links on the master page and then create additional pages by copying this master page.

After that I gave comments to students, they returned to check their links in the Master Page. The links were all assigned to page names above the line of division in the list of links, even if they had initially attributed pages below this line of division. Interestingly, some of the links did not work even after doing this correction on th students files.

I had the students export these files to PDF, and it worked very well. Can someone tell me why, when I open a file that my students sent me, the hotspots fail? I did the right thing by telling them to build their hotspots in the Master Page, then copy this page? What other variables could affect this result?

Thanks for all the help people can give!

Katie Stern

Yes, it was an issue in CS4. It's been fixed in CS5 (I know because I checked). The only solution is to place the layer of hot spots on one of the actual pages. Create a sublayer in the web layer, place the hot spots in this sup layer and share this sublayer to pages. Navigation graphics can stay on the master page.

HTH

Tags: Fireworks

Similar Questions

  • Fireworks CS4 Preview (F12) does not work properly

    I use FW cs4 and have a problem. When I hit F12, it launches the browser, but nothing appears. There is an icon red broken image, tiny bit, similar to the little red x in IE, in firefox, it shows just noting in chrome.  I try to use one of the presets menubar #4 I noticed something. The file type is a .png when I recorded it for the folder root, but when I hit f12 and right-click on the little broken image icon Save as it says it is a .tiff. I don't know if the exported image preview is a .tiff and the browser can't read or the ion little is the .tiff.

    I really need some help here. I need functionto preview correctly work, I did every search I can think, nothing helps.

    Browsers need a plugin to read TIFF files, so this is probably what is causing the problem. Choose file > preview image to check to see if the export settings accidentally put in TIFF format.

  • Strange behavior of Dreamweaver on some code - bug?

    Hi all

    on the analysis of a website, I found a piece of code causing strange behaviors in Dreamweaver (CS4):

    I can neither type nor remove what anyone after that code (as if the keyboard is connected to the wide), but I may change before it.

    When I put the cursor in the word "InstanceParam" and press a whole line turns gray and is now unmodifiable.

    I sent this to a friend to test, but it hehas the same problem.

    Thanks in advance

    -Schurkon

    I don't know why it should be important, because the problem also occurs when you place the code in a new html document in DW.

    It is important because it tells the engine to model how to create the child page.  By "removing" you will break this link and your child page will lose function, as you discover already.

    These pages and their control model using a number of parameters to manage the content of the page-

    
    
    
    
    
    
    
    http://www.schweizerhof-ferienwohnungen.ch/sites/img/layout/back_grau2.gif"
    text="#333333" link="#333333" vlink="#333333" alink="#333333" leftmargin="0" topmargin="0"
    rightmargin="0" bottommargin="0" marginwidth="0" marginheight="0" ...
    

    Looking at your template file (which you have already downloaded it - "deutsch.dwt") I see that you use nested templates (the parent of this template file is Hauptvorlage.dwt - if you also download this file, then I'll be able to tell you that the nav setting on your page.

    Suffice it to say that these settings are a control mechanism for the operation of your pages.  Why do you want to delete?

  • Commands\Create AIR File\Preview does not work in Fireworks CS4

    I'm working on a video of LYNDA for Fireworks CS4 training and I try to preview one of the exercises, according to the instructions. If I click on Preview in the dialog box create AIR file, nothing happens. Any thoughts on why it doesn't work? Thank you.

    Hmm, well, that's weird! lol I would extract the file and see if something went wrong...

    Jim Babbage

  • bug in fireworks CS4 at 24/32-bit with alpha transparent png export?

    Hello

    I recently upgraded to CS4 from CS3 and am very disappointed that the ease of export png to 24 or 32 bit png is then useless on my installation of fireworks (Vista). I have a colleague who reported the same behanviour on his mac.

    Please see this file png native fireworks CS4 and the attempt to export it as 24 or 34 bit png, ensuring the canvas is transparent (it shuold be already)...

    http://www.capitalh.NET/demo-bug.PNG

    The visualization mode in CS3 would show the png with its alpha channel, indicated by the transparency checkerboard. Exporting as well would produce the desired result > a PNG with an alpha nice mix channel.

    Viewing in preview in CS4 mode displays an horrible rendering of the image on a white background. Export the image gives the same result. Please see this link for confirmation:

    http://www.capitalh.NET/demo-bug-export.PNG

    Please also see this simple image, this time using a simple ellipse shape:

    http://www.capitalh.NET/demo-bug-export-SimpleShape.PNG

    You will notice that it is not transparent, and the ellipse has not been smoothed.

    Anyone can shed light on this behavior?

    Export of png as such is something I do every day at work, and is a fundamental requirement of an image editting application targeted to web site design.

    I'm doing something wrong? I been using Fireworks since 2003 so I'm inclined to think that I'm not.

    Transparency is only available when the file is exported as a PNG 8 or

    PNG 32. The sample you have to downloaded has been optimized for the PNG-24 format. When

    I changed optimization PNG 32, the file exported as planned.

    The shape simple PNG file seems to be a solid image, not a vector

    ellipse. In this case, the layout optimization of PNG 8

    with index transparency has solved the problem.

    HTH

    Jim Babbage

  • foreign key 'generate' strange behavior check box, any idea?

    Summary: in the properties of the table, the foreign keys, the box generate behaves badly, and I don't understand why or how I got there.

    Oracle Data Modeler 4.0.2.840 8.1 X 64 Windows, jdk1.7.0_55

    the behavior is:

    (1) add the foreign key (two different more to see strange behavior)

    (2) uncheck 'generate' on a foreign key

    (3) apply, Ok

    (4) ask 'Preview DDL', a foreign key constraint is generated, SO FAR SO GOOD, I'm happy

    5-now click on the button 'generate the DDL' for any design = > * * TWO foreign keys are generated?

    (6) even more strange: sometimes the 'generate' check itself after step 5, most of the time is not

    (7) at the beginning this has occurred for a couple of foreign key 'uncheckees', now it almost always happens.

    The relational model was built by importing the SQL scripts already exist (try to migrate the Data Modeler). No too complex ~ 115 tables, 12 times.

    I think it's a bug, but I can't find any reference on the web, maybe I do something wrong?

    Hi Michel,.

    The generation is different depending on whether or not the relevant storage design is open.

    If the design of the storage is not open, the option "Generate DDL" on the foreign key is taken into account (for an overview of the DDL or full generation of DDL).  For an entire generation of DDL, the foreign key will initially not selected phase in the generation of the DDL if Options the option "Generate DDL" on the foreign key has been disabled.  (This change in the phase of the generation of DDL Options will also cause the option "Generate DDL" on the foreign key update.)

    If the design of the storage is open, the option 'generate DDL"on the foreign key has no effect (in a Preview of DDL or full DDL generation).

    Also in a generation full of DDL, an object will be initially marked as not selected if it has been disabled in the previous generation of DDL.

    I hope that this helps to explain the behavior that you find.

    David

  • Strange behavior of cropping & other bugs

    Hello. My copy of Photoshop CS4 has recently started a strange behavior. I'm working on a 17 '' Mac Book Pro to end 2007 running OS 10.6.4.Ready to crop.png

    This is a screenshot just before cropping in image that I train.

    After cropping.png

    This is the same area after knocking back the harvest indeed. This tiny spec is what remains of my image.

    3200% zoom.png

    If I expand this area to 3200%, that's what I see:

    I've never met this before. I restarted Photoshop. I restarted the computer. I was in 20 GB limit of my hard drive, so I released 40 GB of storage space to backup the old files on DVD. My computer is a maximum of 4 GB or RAM. WTF? A bug perhaps related but somewhat independent, with that I had business since empty menu windows in Illustrator and Photoshop in my series of CS4. Opening the window hides in the PS and the swatches in Illustrator and PS resulted in empty menu windows. (The window is there, without tools or controls inside. Just grey.

    Do I need to remove and reinstall or something? Applications can get corrupted?

    Has anyone seen anything like this before?

    Thanks in advance for your thoughts!

    D

    Check the options for the crop tool bar.

    You entered a resolution, and the acreage resulting something tiny, resampled comes from the selected area.

    The tool to reset, or simply to clear the resolution field.

  • Firefox crashes (and other strange behaviors) due to gifs

    From a recent update Firefox displayed a strange behavior that surrounds the gifs. Sometimes, after viewing pages with a large number of gifs or several very large gifs, Firefox will do things like not animate gifs, or even do not load the images at all, an and will not stop until I have restart Firefox. What's more concerning is that sometimes in these situations, Firefox will simply hang and stop responding, forcing me to kill the process.
    This page shows the behavior of hanging fairly regularly: http://www.neogaf.com/forum/showthread.php?t=1021843 & page = 21
    It seems more likely to happen when I scroll the page quickly. The behavior persists when I restart Firefox mode without failure.

    39 of Firefox seems to have solved the problem.

  • I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

    I just installed Firefox 29,0 for Mac.
    I have a strange behavior of the bar tabs and the address bar with this new version.
    Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
    (I add a screenshot, but I can't find a way to do it).

    Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

    • Firefox menu button > Options/Preferences > toolbars
    • View > toolbars > customize
  • Strange behavior USB Flash Drive Satellite A100-626

    Hello

    I did install Windows Vista Business Edition on my Satellite A100-626 (PSAA9) following the instructions provided in the Web page of drivers.

    So far, everything works as expected, except for one little (or no) question.

    When I ask Vista to 'Remove hardware safely' my USB Flash drive, a Popup appears telling me to remove it. So far, so good :D

    The only thing is that the flash player is not put out as could be expected and and yellow question mark appears in Device Manager.

    Opening of the question mark can read what follows:

    "Windows cannot use this hardware device because it has been developed to remove safely, but it has not been removed from the computer. (Code 47) To resolve this issue, disconnect the device from your computer and plug it in again. »

    Following the instructions above, the light turns off, lol...

    Someone else met this strange behavior? If so, any solution?

    I tried a few USB flashes that run well on XP and they both do the same thing.

    Thank you, Nuno!

    Hi Nuno

    It's very strange. I have the Satellite A100-504 (comes with Windows XP Home edition). Last week, I installed Vista and all the stuff followed Toshiba document instructions facilities. I use the mouse wireless, external HDD USB web cam. With the help of these external devices together I never noticed a similar behavior.

    You have the same situation with all the USB ports?

  • redeclenchables strange behavior digital output

    I created a redeclenchables digital dashboard task (finished) digital output as follows: (in DAQmx C)

    DAQmxCreateTask("",&_taskHandle);
    DAQmxCreateDOChan(_taskHandle,"/Dev2/port0/line6","",DAQmx_Val_ChanPerLine);
    DAQmxCfgSampClkTiming (_taskHandle, "" / Dev2/Ctr0InternalOutput ", _clockRate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, static_cast (_sampleCount)");
    DAQmxCfgOutputBuffer (_taskHandle, static_cast (_sampleCount));
    DAQmxCfgDigEdgeStartTrig (_taskHandle, "/ Dev2/PFI4", DAQmx_Val_Rising ");
    DAQmxSetStartTrigRetriggerable (_taskHandle, true);
    DAQmxWriteDigitalLines (_taskHandle, static_cast(_sampleCount), FALSE,-1, DAQmx_Val_GroupByChannel, _pDigital, NULL, NULL);
    DAQmxStartTask (_taskHandle);

    sample clock:

    DAQmxCreateTask ("", & _taskHandleCO);
    DAQmxCreateCOPulseChanFreq (_taskHandleCO, "/ Dev2/ctr0","", DAQmx_Val_Hz, DAQmx_Val_Low, 0,0, _clockRate, 0.5 "");
    DAQmxCfgImplicitTiming (_taskHandleCO, DAQmx_Val_ContSamps, _numSamples);
    DAQmxStartTask (_taskHandleCO);

    When I run the task without redeclenchables parameter, it output a correct signal. However, if I run with redeclenchables it out almost exactly 2 times faster than normal. For example, a pulse whose width of 10 ms became 5 ms and repeats again to be 2 pulses of 5 ms. This is repeatable, no matter how much or how fast triggers provided.

    My card is PCIe-6363. I do not know what causes this strange behavior, and I hope someone can help on this.

    Thank you.

    It disappears after reset configuration. Might be interesting for future reviews.

  • Strange behavior with the function «Help in command line»

    So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

    If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

    All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

    Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

    Note - side

    Curiously, the Index for the help lvconcepts.chm file looks like this:

    In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

    Hello

    Please contact National Instruments!
    It is a very strange behavior.  I tested out and seen the exact
    same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
    From what I can tell the a possible workaround solution that we have documented
    in the post of root Canal.  I can't continue to look into this in order
    to see if there is no other workaround solution or a reason why it is
    run in this way.  Thanks much for the feedback!  If
    you have any other questions on this subject please post them here.
    Have a great day!

  • Strange behavior file open/create/replace

    Hi all

    I will make my question as broad as possible because I think someone must have met this behavior before. I use the function open/create/replace file to programmatically open a file, giving a path entry created in an earlier vi. Strange behavior, I see, is that although Labview returns 1 error when I give my file programmatically, it reads the file OK if I give as a constant. The constant path that I give is exactly the same as one I am tryinng to programmatically.

    Any suggestions? Is it to do with a string formatting problem? I enclose my portion of treated VI the path_in section.

    Thanks for your time,

    Kind regards

    Harry

    Wild guess: you must use 'build path' instead of 'concatenate strings' build path.

    (Also use a constant of diagram of the path (not a string!) to "c:\ni-rt\" and get rid of the "trim whitespace' and the 'chain of path")

    See if that makes a difference. (build path is OS independent, while the operations of independent channels are not).

    Never use the paths as strings. There are very few cases where this would be appropriate.

  • Issues coming out of "sleep mode" and strange behavior when restarting with GPU

    I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

    However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

    This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

    Without the GPU, none of these problems occur. At the very least, not regularly.

    I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

    Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

    Any suggestions would be greatly appreciated!

    Problem has been solved!

    For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

    http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

    It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

    However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

    As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.

  • Strange behavior of TM2 recharge battery - only charges when almost dead

    Hi people,

    I have a new 2200 TM2T who exhibits some strange behavior of battery charge.  When plugged in, the battery will say "connected, charge", but the battery does not charge at all, no matter how much time he has left in (reported remaining level remains the same).  However, if I leave the battery discharged completely, it will start loading again, all the way up to 100%.

    It's a kind of weird automatic battery calibration or something?  I am hoping there is a way to solve this problem, because it's really annoying to not be able to keep busy all the time.

    Hi people,

    I just wanted to report on the resolution of my battery problem.  Returned the laptop to HP, and technical support has replaced the motherboard.  Works fine now.

Maybe you are looking for