I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

Similar Questions

• Go back to the previous behavior in the address bar

  Just upgraded to Firefox 31.2 and I find that the new behavior of the address bar is in conflict with how I work. I often copy / paste URL, I type directly into the address bar, I use a current to go to about.config tab and none of these work. I found a reference to the evolution of the gfx.xrender.enabled false, but this did not help. Clues on how to revert to the old behavior?

  It's about: config with a colon...

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• Strange behavior of the browser blocks SQLDEV DM

  Hello

  I feel some strange behaviors in the browser of Datamodeler.

  After the opening of my model

  I have doubleclick in the window of the browser to fetch a few properties of the index:

  Drawings and models > MyModel > relational models > my RelModel > models > Oracle Database 10g > Tables

  So far, everything that happens.

  -I can select the tables and

  -doubleclicking shows the properties of the table.

  -I can scroll vertically

  -Select other tables

  -open and close the subtree of this physical tables

  Now, as soon as I click on any 'more' in the physical tables (for example, the index node or node of the plate) the browser "tri-de gel".

  The tree is distorted, scrolling seems erratic and it is impossible to select. Most of the time the main menu is also distorted.

  If I make the browser window, most of the time I'm able to hit the "file > save" from the menu. The model seems to be registered properly.

  No damage seems to have been done to the template on the reopening

  I'm on Windows 8 pro with the 64-bit version of datamodeler version 4.1.2.895 (from datamodeler - x 64 - 4.1.2 - 895.zip)

  Any ideas anyone?

  any response greatly appreciated.

  concerning

  Wouter

  Hi Wouter,

  I'm sorry, this is a bug and we are preparing a new version with this bug fixed.

  If I make the browser window, most of the time I'm able to hit the "file > save.

  Close the Data Modeler (X - close button in the upper right corner) and it will ask to save the drawing it is changed.

  Philippe

• Strange behavior of the rectangle tool

  I drew a rectangle with the rectangle tool and got a form than of a conical label around the rectangle. Never seen that before and I could not duplicate once I opened the application again. This seems a strange behavior of the app, or is there something that I don't know this tool? Please tell me this is something lacking in my knowledge base. It drives me crazy

  Monika, yes it was. He worked with the forward Warp effect. Thank you for your response. Mental health is back thank you for your kindness

• Strange behavior with the PSD in Photoshop

  I am currently working with a two-page ID CS5.5 document. This is a CMYK document with CMYK images and grayscale.

  Strange behavior is the following: I have a gray levels (tiff) image that is repeated on the page 1 and page 2. This image looks completely different from page 1 to page 2. I have triple checked everything (opactiy, effects, etc.) and then I started to remove items from page 2 one by one.

  As I deleted a psd file all of a sudden all the images in grayscale on page 2 changed his appearance to match page 1. The PSD in question is also in CMYK with a transparent background. What the frack happens?

  I'm more concerned to know if it makes a difference when it goes to print, or if it's just weird screen in InDesign.

  Anyone who has heard of this or know why this happens - would like to hear from you.

  Thank you!

  I think it's simply because of full transparency on the page. Should not affect the production of gray images... but check in Acrobat.

  Mike

• Get the message: "Please download Adobe Reader DC for Mac or Windows" when I try to open a fillable pdf on my ipad.

  Get the message: "Please download Adobe Reader DC for Mac or Windows" when I try to open a fillable pdf on my ipad. But when I'm looking for the DC version in the app store there is no one, please help?

  Hi fabler80957302

  Please confirm if you get the error message below

  If so, it is a special type of PDF form with Adobe LiveCycle Designer. And mobile applications of Acrobat Reader do not support these forms.

  I suggest for you please download the PDF document on your Windows or Mac desktop and open the same with the Acrobat reader DC desktop version.

  Also please let us know if this is a different issue than that.

  Kind regards

  Supriya

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

• I can't see the 'recently closed tabs' and 'windows' recently closed in Firefox-> history. Where are they?

  I use Firefox 4 Beta 3 and I can't see the 'recently closed tabs' and 'windows' recently closed in Firefox-> history. Where are they?

  They do not appear on the history of the Firefox button entry, but they are always on the menu background traditional, accessible by pressing Alt and S.

  Checking through some models of the Firefox button, it seems that he is expected to add to the option in the history of the Firefox button. Although there are probably differences, see this image for an idea of what the Firefox menu final button will look like at- https://bug583386.bugzilla.mozilla.org/attachment.cgi?id=461697

• I downloaded Photoshop CS2 and tried to install it on Mac. I have a license and heard its possible still install Photoshop CS2 for Mac. I'm on Mac 10.9.4. On the installation of scripts, I received an error - helps a lot?

  I downloaded Photoshop CS2 and tried to install it on Mac. I have a license and heard its possible still install Photoshop CS2 for Mac. I'm on Mac 10.9.4. On the installation of scripts, I received an error - helps a lot?

  heard it can still install Photoshop CS2 for Mac.

  Only on Mac under 10.6 or earlier.

  CS2 will not install on modern Macs like yours with 10.9.4 running Intel processors.

  CS2 is a PowerPC software designed to run on PowerPC processors. It is not compatible with the Intel processors (without the Rosetta translator).

  The latest version of Mac OS X can run CS2 (with Rosetta) was OS X 10.6.

• ACR updates will continue to be available for CS6 or should I go to the CC? If I start on the CC on PC can I opt for MAC?

  ACR updates will continue to be available for CS6 or should I go to the CC? If I start on the CC on PC can I opt for MAC?

  Adobe still schedule releases ACR CS6 Adobe Camera Raw 8 CC of Photoshop and Photoshop CS6 support

  Photography at $10 per month program includes Photoshop CC 2014. You can activate up to 2 computers, Mac or PC.

  Gene

• [MAF - AMPA] Strange behavior of the MAF with REST service

  Hi MAF Experts.

  I just noticed that there is a strange behavior in my application of the MAF. The first loading of the page, amx:page does not make its contents (of REST). However if I kill the app and relaunch the app, content appears.

  Pattern:

  1. Start of the CRG App
  2. Opening of session
  3. Dashboard (the content is rendered)
  4. Go to any other aspect (lets say a list of products)
  5. Open product list (content do not get returned)
  6. Kill the MAF application
  7. Start of the CRG App
  8. Dashboard (the content is rendered)
  9. Go to the product list
  10. List of products (content gets rendered)

  I put a few breakpoints on EntityCRUDService and RestPersistenceManager.

  So far it return the list of entities and display the correct data (from watches in debug mode)

  Last thing I noticed is the red color below. She defined the EntityList with the new value of REST (This displays a correct value).

  TaskExecutor.getInstance (.execute (isDoRemoteReadInBackground ())

  , () -> {

  Auto Sync all actions pending first, pass false for inBackground because

  We want to process actions pending before the reading distance

  getDataSynchManager (.synchronize (false));

  The list of entities < E > = executeRemoteFindAll();

  If (entities! = null)

  {

  When an error occurs (for example server is not available, the method returns the value zero)

  setEntityList (entities);

  }

  });

  Any suggestion?

  All the rest service are configured with AutoQuery = true in the persistence - mapping.xml

  See you soon,.

  Hendry

  Hendry,

  Thanks your testcase, I was able to understand the problem.

  It turns out that MAF 2.1 has problems dealing with the advanced way in which AMPA running background tasks with the help of a thread in all of features.

  We have slightly modified the implementation in AMPA to use one thread per function and now the update issue is resolved. I sent you a link to new construction.

  We will publish the new generation soon on GitHub so that others can benefit in the same solution.

  Steven Davelaar,

  Oracle Mobile A-team.

• Strange behavior with the paths of the image

  All, morning

  I have a strange behavior going on with my image paths and I was wondering if someone might be able to identify what they think happens?

  On the relative paths of my model (.. / Images/example.jpg) work very well.

  However, on the pages of the child the same relative paths do not display images and so I had to remove the '... /' to get to work (ending up with Images/example.jpg).

  This is obviously not desirable that I'm going to manually tweak the child pages where the content of the combo box was copied directly from the model that works very well.

  Any ideas what might be up?

  Thanks in advance

  You have not yet entered the main directive of models, which is that only changes to the unchangeable in the model regions will be applied to the child pages.  If this were not true, then we could never put unique content on a child page!

  So - the diagram is as follows:

  1 create a template and save it.

  2. the model of a page child spawn.  The child page will be a 'identical' model copy.

  3. Add a unique content to the page of the child.  The child page is now more a copy of 'identical' of the model.

  4 change something in the part NOT MODIFIABLE from the model and save it - all child pages receive the change.

  5 change something in the EDITABLE model part and save it - no child pages do not receive the change.

  6 spawn a NEW page of the model, and it's still a copy of 'identical' AGAIN CHANGED model.

  See how it works?

• Strange behavior. 2590 relay switch and Get position vi.

  I'm reading a PXI2590 1 x 4 MUX switch relays that I fires only when necessary. I know the names of the relays are MUX01, MUX23 and MUX0123. If I switch, niConnect channels INIT, wait Debounce and can get the Position of the relay, I get a correct reading (closed or open). I then called niSwitch close .vi and the switch remains in this position.

  However if I just called INIT, niSwitch getting the Position of relay and close vi seems the selector to a different value (default?). I confirmed this behavior using a HF generator and Analyzer of spec.

  Is what I do with these evil vi? Can I use DAQmx driver for this switch instead?

  LabVIEW 8.5.1

  OR-Switch 3.70.49152

  NOR-DAQmx 8.7.1f2

  NOR-PXI-2590

  Hello GovBob,

  Correct me if I'm wrong.  First you call OR-SWITCH boot (not initialize with topology) or initialize options with the 'reset device' Boolean is unwired? (which means reset = true)

  Then, in a case: call OR-SWITCH connect channels, wait OR-SWITCH Debounce, OR-SWITCH get relay post, then NOR-SWITCH close (close a session, not close relay).  Then physically measure opens or shorts.

  In the other case: appeal OR-SWITCH get relay post, then NOR-SWITCH close.  Then physically measure opens or shorts.

  The results are the second case has openings (ch0 is connected to the com).  This is expected behavior since the indicator 'reset the device' in one of the screws initialize is TRUE if left thread continues.  However, if you physically measure different values compared to what OR-SWITCH get post is back, so please submit your screws and a list of the steps and the values measured for each stage.  I hope this helps!

  -Jordan

• Strange behavior of the CAM Table SG300-28

  We have two switches SG300-38, both set to update to the latest firmware (1.1.2.0) and the two experience a strange problem in the MAC address Table. It seems that switches cannot learn the mac address, or forget too quickly learned in MACs.

  The switches have a very basic, just configuration of VLAN, but the problem is constant in all the VLANS. Whenever we start a file transfer, we can see (and we have confirmed with packet capture) traffic is flooded among all other ports.

  To test it, we added a few MACs static, and the traffic to these Mac works correctly.

  Please, can I do to stop this behavior? It seems that we have gone back to the time of the Hub!

  Natalio,

  This firmware fixed some issues with the MAC address tables. Factory reset switch and reconfigure and test it. I've seen a few problems when upgrading to the latest 1.1.2.0 fabless switches - 10% of cases have to factory reset reset.

  Jasbryan