Strange delay on starting an exe with DAQmx

Similar Questions

• delay after typing my password with the message: "preparing your desktop" displayed on the login screen

  I use Windows Vista for about 3 years now, it has been hurt on the first day.  However, it is the biggest problem I've ever known.

  My PC is currently the entire installation, which means that all the software, drivers and personal settings are applied to the way I would like it. But lately, I have had opportunities indicate that loggin, there was a long delay, after typing my password with the message: "preparing your desktop" displayed on the login screen (the PC was night shotdown, not having changed anything to the system), then I am connected to a desktop where I lost all my custom settings : wallpapers, plans, location of the updated table on the page icon, were all gone as if I start Windows for the first time, and every program I tried to run from there thought while they started upward for the first time.

  My office, I know, has completely disappeared.   How can I get it back?  Where at - it go?

  I am a school teacher and my student missions, etc. are in the files on the desktop.

  I'd appreciate any help you can give me.

  Please keep in mind that I'm not a techno person and very little familiar with several computer attributes.

  Thank you

  Press Alt + Ctrl + delete

  Start the Task Manager

  Click new task below or click file > new task

  Type explorer.exe

  Click ok

  Bring this back?

• Strange delay in database connections

  We are witnessing a strange delay when our JDBC client tries to make 4 connections to the database. The first connection takes 27 seconds (sometimes more) and 3 other connections are less than 1 second. As you can see in the ourJDBCclient log number 0 started at 09:09:11 connection request. He hit the listener at 09:09:11, and a strange gap of 27 seconds before ourJDBCclient reports a successful connect at 09:09:38 on the second line of the ourJDBCclient newspaper. In the source code, open connections are called right after the other. No idea where delay could come from?
  
  We run Oracle 11.2.3 EE server on Linux 2.6.18 - 92.el5
  
  Journal of ourJDBCclient:
  February 28, 2013 * 9:09:11 * AM paradigm.ems.dbobjects.implementations.JDBC.DBObjectConnectionHandler openConnection FINE: opening connection: jdbc:oracle:thin:@ourserver.ourdomain.com:1521:oursid, OURJDBCCLIENT
  February 28, 2013 * 9:09:38 * AM paradigm.ems.dbobjects.implementations.JDBC.DBObjectConnectionHandler openConnection FINE: successfully connected to the database (number 0 connection)
  February 28, 2013 09:09:38 paradigm.ems.dbobjects.implementations.JDBC.DBObjectConnectionHandler openConnection FINE: opening connection: jdbc:oracle:thin:@ourserver.ourdomain.com:1521:oursid, OURJDBCCLIENT
  February 28, 2013 09:09:38 paradigm.ems.dbobjects.implementations.JDBC.DBObjectConnectionHandler openConnection FINE: successfully connected to the database (connection number 1)
  February 28, 2013 09:09:38 paradigm.ems.dbobjects.implementations.JDBC.DBObjectConnectionHandler openConnection FINE: opening connection: jdbc:oracle:thin:@ourserver.ourdomain.com:1521:oursid, OURJDBCCLIENT
  February 28, 2013 09:09:38 paradigm.ems.dbobjects.implementations.JDBC.DBObjectConnectionHandler openConnection FINE: successfully connected to the database (number 2 connection)
  February 28, 2013 09:09:38 paradigm.ems.dbobjects.implementations.JDBC.DBObjectConnectionHandler openConnection FINE: opening connection: jdbc:oracle:thin:@ourserver.ourdomain.com:1521:oursid, OURJDBCCLIENT
  February 28, 2013 09:09:38 paradigm.ems.dbobjects.implementations.JDBC.DBObjectConnectionHandler openConnection FINE: successfully connected to the database (number 3)
  
  Listener.log:
  February 28, 2013 * 09:09:11 * (CONNECT_DATA = (SID = oursid) (CID = (= JDBC Thin Client PROGRAM) (HOST = __jdbc__) (USER = ourjdbcclientuser))) * (ADDRESS = (PROTOCOL = tcp (PORT = 56495))(HOST=10.0.10.1)) * establish * oursid * 0
  February 28, 2013 09:09:13 * (CONNECT_DATA = (SERVICE_NAME = othersid1.ourserver.ourdomain.com) (INSTANCE_NAME = othersid1) (CID = (PROGRAM = oracle) (HOST = qa001.ourdomain.com)(USER=oracle))) * (ADDRESS = (PROTOCOL = tcp (PORT = 47848))(HOST=10.0.10.34)) * establish * othersid1.ourserver.ourdomain.com * 0
  February 28, 2013 09:09:16 * (CONNECT_DATA = (SERVICE_NAME = othersid1.ourserver.ourdomain.com) (INSTANCE_NAME = othersid1) (CID = (PROGRAM = oracle) (HOST = ourserver.ourdomain.com)(USER=oracle))) * (ADDRESS = (PROTOCOL = tcp (PORT = 38159))(HOST=10.0.10.35)) * establish * othersid1.ourserver.ourdomain.com * 0
  February 28, 2013 09:09:22 * service_update * othersid1 * 0
  February 28, 2013 09:09:32 * (CONNECT_DATA = (SERVICE_NAME = othersid1.ourserver.ourdomain.com) (INSTANCE_NAME = othersid1) (CID = (PROGRAM = oracle) (HOST = ourserver.ourdomain.com)(USER=oracle))) * (ADDRESS = (PROTOCOL = tcp (PORT = 38165))(HOST=10.0.10.35)) * establish * othersid1.ourserver.ourdomain.com * 0
  February 28, 2013 09:09:37 * (CONNECT_DATA = (SERVICE_NAME = othersid1.ourserver.ourdomain.com) (INSTANCE_NAME = othersid1) (CID = (PROGRAM = oracle) (HOST = ourserver.ourdomain.com)(USER=oracle))) * (ADDRESS = (PROTOCOL = tcp (PORT = 38166))(HOST=10.0.10.35)) * establish * othersid1.ourserver.ourdomain.com * 0
  February 28, 2013 * 09:09:38 * (CONNECT_DATA = (SID = oursid) (CID = (= JDBC Thin Client PROGRAM) (HOST = __jdbc__) (USER = ourjdbcclientuser))) * (ADDRESS = (PROTOCOL = tcp (PORT = 56496))(HOST=10.0.10.1)) * establish * oursid * 0
  February 28, 2013 * 09:09:38 * (CONNECT_DATA = (SID = oursid) (CID = (= JDBC Thin Client PROGRAM) (HOST = __jdbc__) (USER = ourjdbcclientuser))) * (ADDRESS = (PROTOCOL = tcp (PORT = 56497))(HOST=10.0.10.1)) * establish * oursid * 0
  February 28, 2013 * 09:09:38 * (CONNECT_DATA = (SID = oursid) (CID = (= JDBC Thin Client PROGRAM) (HOST = __jdbc__) (USER = ourjdbcclientuser))) * (ADDRESS = (PROTOCOL = tcp (PORT = 56498))(HOST=10.0.10.1)) * establish * oursid * 0
  February 28, 2013 09:09:40 * service_update * othersid1 * 0
  February 28, 2013 09:09:40 * service_update * othersid1 * 0
  February 28, 2013 09:09:42 * (CONNECT_DATA = (SERVICE_NAME = othersid1.ourserver.ourdomain.com) (INSTANCE_NAME = othersid1) (CID = (PROGRAM = oracle) (HOST = ourserver.ourdomain.com)(USER=oracle))) * (ADDRESS = (PROTOCOL = tcp (PORT = 38169))(HOST=10.0.10.35)) * establish * othersid1.ourserver.ourdomain.com * 0
  February 28, 2013 09:09:47 * (CONNECT_DATA = (SERVICE_NAME = othersid1.ourserver.ourdomain.com) (INSTANCE_NAME = othersid1) (CID = (PROGRAM = oracle) (HOST = ourserver.ourdomain.com)(USER=oracle))) * (ADDRESS = (PROTOCOL = tcp (PORT = 38170))(HOST=10.0.10.35)) * establish * othersid1.ourserver.ourdomain.com * 0

  Note that you referred, stipulates however a fix in 11.2.0.3 - so perhaps Oracle has of a workaround in this version? Or a better way to do what to do.

  This score gave strace results where socket connect() calls are made to (DNS?) IP addresses on port tcp 53 (DNS service port). That seems to be the problem... However, the note provides more technical details.

  And seeing that 11.2 is widely used and not widely, this occurs, it means something different in your installation and/or the environment.

  It would also be that this note has nothing to do with the question that you have, apart from sharing similar symptoms.

  I'd still go to isolate the error using SQL * more than the client (with debugging SQL * Net tracing on). Once the error can be triggered reliably somehow, then I turn on the SQL Server side * Net / debug tracing listener and resort to using commands like lsof and strace.

  You can also file an SR with Oracle support and let them provide you with clear instructions of what to do in order to provide useful diagnostics to solve the problem.

• PXI-6602 generate signals in squaring A, B with DAQmx in CVI

  Hello

  I want to know if it is possible to generate a quadrature encoder signals...

  I want to generate the Signal A, then B Signal with a 90 ° of the delay on the other and be able to set the number of pulses that I want to generate.

  I tried to generate signals with DAQmxCreateCOPulseChanFreq, but I can't start Singal B with the delay of 90 °.

  Have any experience on this?

  Thank you for your help,

  Hello gramirezv Hello,.

  Here is a KB which may help you to generate two trains of pulses with the same frequency but with a phase shift:

  How can I generate two pulse Trains phases shifted from each other on my E series card?

  http://digital.NI.com/public.nsf/allkb/26CCE4F74DACFD1886256DCF006B011A?OpenDocument

  Have a lovely evening,

  Best regards

  CaEnOs

• Timing embedded with Daqmx on PCI-6132

  Hello

  My colleague and I are trying to make a program Labview which starts a timer when the first trigger (sensor) is struck and stop the timer when the second trigger (sensor) is reached in 2012. We currently have a program for her, but this program was not sufficiently precise. Also the current program is using the DAQ assistant, but we would like to replace with daqmx triggering. We have also tried to use the OnboardClock on the PCI-6132, but still could not do the work programme.

  Is there anyone who knows how to do this and could explain it?

  (In the attachment is the current program)

  Thanks in advance,

  Tommy van Geest

  Hello Tommy.

  You can share your current code?

• Programmatically move EXE file to RT-target and change the INI to start the EXE when restarting. Then the target restart RT.

  I'm trying to:

  1. download the rtexe on the target in real time
  2. download the file or - rt.ini of the RT target on the local disk
  3. change the RTApp.StartupApplication path to POINT to newly downloaded rtexe
  4. download the ini file edited to target RT
  5 reset
  6. the new rtexe should start to run

  When manually deploy the application of RT through the Project Explorer and manually restart the target RT works very well.

  However if I follow the steps above using the attached VI, to restart it does not start the EXE and loses the connection with the RT.

  When I try to reconnect, he said:

  "Errors were detected in the log of the target when connecting to the target:

  LabVIEW: (Hex 0x63B) target the RT has not enough memory to load the startup application. »

  Now why is there enough memory when the EXE is deployed through the Project Explorer, but not enough when the EXE file is moved manually?

  If there is an easier process or to achieve this goal, please suggest.

  Thank you

  Problem solved.  Problem was never in the INI file.

  Apparently using FTP "FTP Store Multiple.vi" used to move the file EXE to the rt to intimidate target must change the file somehow. Instead I just use the FTP "Put several files.vi" and everything works fine.

• Is it time stamp with daqmx read

  Hi all

  Simple question.  I have currently not creating a task or starting a task, I simply create a channel and reading that chanel.

  It is...  Why I don't get a timestamp when you do and do I create a task to get one of this?

  There is a timestamp when you use the DAQ Assistant or when you choose to return a data type of waveform with DAQmx Read.

  You can't do a reading without a blemish. You don't have to create the task in MAX, however.

• When I click on before sending a message, I get a screen 'Silverlight.Configuration.exe' with an allow / do not allow permission.

  Silverlight.Configuration.exe

  When I click on before sending a message, I get a screen 'Silverlight.Configuration.exe' with an allow / do not allow permission.  I am also warned that it is outside

  My protection.  Recently started to receive emails of some of my address book to stop sending advertisements.  (which I did anyway)

  What is happening and is involved with Silverlight, you have an idea?

  Hello

  . What mail client do you use?

  . When was the last time it was working fine?

  . What antivirus software you use in your system?

  . Did you do recent changes with the hardware or the software before the show?

  Method 1: A clean boot helps eliminate software conflicts. Visit the link to learn how to perform a clean boot: http://support.microsoft.com/kb/929135

  Note: once the troubleshooting is complete, reset the computer to start as usual.

  Method 2: Also uninstall and reinstall Silverlight and check if it helps:

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

• By clicking on any shortcut prompt "what program you want to open (progrem.exe) with? dialog box.

  Hello
  I'm stumped on this one. Whenever you launch any program on the start menu, the command open, run box, the "program would you like to open (progrem.exe) with? appears, example by clicking the shortcut of internet Explorer, invites "which program you would like to open iexplore.exe with? It looks like a file association error but cannot find a list.
  Help

  Hello midryder

  Go here

  12 straight line

  Save the REG file to your hard drive. Double click it and answer Yes to the import prompt.

  .

• Is it possible - under XP Professional - to delay the start of the application? I'm not interested to install external software to do.

  Is it possible - under XP Professional - to delay the start of the application? I'm not interested to install external software to do.

  Hello Abi8220

  I don't know of any way to do with XP

  Startup Delayer is free if

  .

• I get a message from DLL run when starting my laptop with Windows 7

  I get a message from DLL run when starting my laptop with Windows 7.  One of the messages is: c:\users\xxx\AppData\Local\fgpise.dll. How can I get rid of these messages? McAfee has detected two Trojan horses and withdrawn earlier today. He says that my system is clean now. Did that cause this problem?

  Hello

  Do not assume that any malware has been removed.

  This is probably the result of malware then do a very thorough check and when the system
  is clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• PL/SQL to run the exe with the DB settings

  Hi all
  
  I have a little problem.
  
  I'm in the need to write that all connection, disconnection and connection fail data to the Windows application log. To do this, I already tried various solutions, but with my configuration (EE Oracle 10.2.0.4) and Windows Server 2003 R2 X 64 the only possible solution is (apparently) the following.
  
  I create a Table with the information I need:
  
  --------------------------------------
  
  CREATE TABLE logonaudittable
  (
  event VARCHAR2 (15).
  SID NUMBER,
  series # NUMBER,
  time DATE,
  name VARCHAR2 (30),
  osuserid VARCHAR2 (30),
  MachineName VARCHAR2 (64)
  )
  /
  --------------------------------------
  
  I have create a trigger for the connection data, one for logging for the logon fails:
  
  ------------------------------------------------
  
  LOGON trigger.
  
  Database of logonauditing AFTER logon ON CREATE OR REPLACE TRIGGER
  DECLARE
  MachineName VARCHAR2 (64);
  osuserid VARCHAR2 (30);
  v_sid NUMBER (10);
  v_serial NUMBER (10);
  
  CURSOR c1 IS
  SELECT sid, serial #, osuser, machine
  FROM v$ session WHERE audsid = userenv ('sessionid');
  BEGIN
  OPEN c1;
  EXTRACT the c1 IN v_sid, v_serial, osuserid, machinename;
  
  INSERT INTO logonaudittable VALUES ('CONNECT', v_sid, v_serial, sysdate,
  user, osuserid, machinename);
  
  CLOSE c1;
  END;
  /
  
  -----------------------------------------------
  
  Logoff trigger
  
  CREATE OR REPLACE TRIGGER logoffauditing
  BEFORE logoff ON database
  DECLARE
  MachineName VARCHAR2 (64);
  osuserid VARCHAR2 (30);
  v_sid NUMBER (10);
  v_serial NUMBER (10);
  
  CURSOR c1 IS
  SELECT sid, serial #, osuser, machine
  FROM v$ session WHERE audsid = userenv ('sessionid');
  BEGIN
  OPEN c1;
  EXTRACT the c1 IN v_sid, v_serial, osuserid, machinename;
  
  INSERT INTO logonaudittable VALUES ('LOGOUT', v_sid, v_serial, sysdate,
  user, osuserid, machinename);
  
  CLOSE c1;
  END;
  /
  
  -------------------------------------------------------
  
  Logon trigger FAILS
  
  CREATE OR REPLACE TRIGGER logonfailauditing
  AFTER ON SERVERERROR database
  DECLARE
  MachineName VARCHAR2 (64);
  osuserid VARCHAR2 (30);
  v_sid NUMBER (10);
  v_serial NUMBER (10);
  
  CURSOR c1 IS
  SELECT sid, serial #, osuser, machine
  FROM v$ session WHERE audsid = userenv ('sessionid');
  BEGIN
  IF (IS_SERVERERROR (1017)) THEN
  OPEN c1;
  EXTRACT the c1 IN v_sid, v_serial, osuserid, machinename;
  INSERT INTO logonaudittable VALUES ('FAILLOGON', v_sid, v_serial, sysdate,
  user, osuserid, machinename);
  CLOSE c1;
  END IF;
  END;
  /
  
  -------------------------------------------
  
  The I create a trigger that starts each time something is written on the table.
  This trigger must start an EXE file which writes the last data written on the table in the Windows application log.
  
  So I need a trigger that executes my WRITELOG. EXE file adding parameters. For example:
  
  Run WRITELOG. Event time username sid EXE
  
  So my program will write a journal in Windows with these data:
  
  Event: opening of SESSION
  SID: 2938473
  Time: 12/12/2011 11:45:32
  User name: Scott
  
  And so on.
  
  I already have the program that does this, I need to run the program with the right data directly from trigger or procedure performed by my trigger.
  
  Hope that I was clear and REALLY hope that someone can help me!
  
  Thanks to you all!

  So practically I should create a job something like this:

  BEGIN
  () dbms_scheduler.create_job
  job_name-online "CONNECTION."
  job_type-online "EXECUTABLE."
  job_action => ' c:\yourdirectory\FILE. LOGON EXE ' | v_sid | » '|| v_serial | » '|| to_char(sysdate,'MM/DD/YYYY') | » '|| the user | » '|| osuserid | » '|| MachineName |';
  number_of_arguments-online 1
  start_date => SYSTIMESTAMP,
  enabled-FALSE, online
  comments => ' SQL * Loader jobs Demo');
  END;
  /

  and then I need to start this work every time that the LOGON trigger fires and it must be the trigger that inserts into the work, the arguments v_sid, v_serial, etc..

  ... I don't know how I can do this. What I need to create a procedure that creates jobs and the procedure is executed by the trigger? and how do you know the procedure to create the job with the data provided by the trigger. Sorry I ask much for the help, but I need this thing made in a time which is not compatible with me studying how to do it by myself. I will look at it, I want to know exactly how these things work, but now I need to speed things up a bit!

  Thank you for all the valuable assistance tfor!

• I use view all bookmarks to set up a menu. When I click on something it often becomes hidden behind the menu page. This started to happen with the latest Firefox upward

  I use view all bookmarks to set up a menu. This page is now tagged library.
  When I click on something it often becomes hidden behind the library, rather than to the front where it is supposed to be. It started to happen with the latest update of Firefox.

  Can it be fixed?

  Sometimes, I noticed when I open a link in Firefox that the window that I expect to appear and stay out in front did not stay in front. I have not been able to identify a model, and just try once your script, it's not happened to me.

  If you have a widescreen monitor, another option for the use of bookmarks, in addition to the Library/Organizer and the dropdown menu, is to use the sidebar (press Ctrl + b to open and close).

• Satellite 2450: How do I start the laptop with the lid closed (LCD).

  I have connected the switch of power with cables and stretched it out and it works fine.

  My question is how can I start the computer with the lid closed? Is there a switch that allows the computer to know when the lid is closed or not? Can I remove this? where is this switch?

  This option can be disabled threw the bios of the computer and how?

  Any help apreciated

  Well, you should be able to boot up your laptop in this way, but how to market? The power button on my laptop is under the cover.

  And Yes, there is a kind of switch, which leave the phone know that the door is closed, but it's only important in Windows, it does not close or go on stand-by.

  To avoid this, just set power options to do nothing on a closed lid.

• How to start the exe of SOUTH dialogue

  Hello!

  My problem is: I'm trying to start an exe file by clicking on a button in a dialog SOUTH. Anyone know how to realize that?

  ("Example: Run("C:\Windows\Notepad.exe ")?

  Thank you!

  "Dim command: command =" "" "& Dialog.FilePath &"Script Assistent\TSM Script Assistent.NET.exe"& '"
  
  Dim shell: Set shell = CreateObject ("WScript.Shell")
  
  protected status: status = shell. Execute (command, 1, true)
  
  <>status then
  
     Err.Raise 6, ' ', ' command returned the error!
  
  End If

  Dialog.FilePath the path of the southern file conatins.

  Because the command contains spaces, it is important to put it in "."