strange fonts appeared after change of the font size to 12

Similar Questions

• Nothing appears after clicking on the Bluetooth setting

  Nothing appears after clicking on the Bluetooth setting. I use win 8. It was working GRP

  Hello

  Thank you for your response.

  -Is that the Bluetooth works fine now in Windows 8?

  I suggest to install compatible drivers Windows 8.1 for Bluetooth drivers and chipset from the following link and check if it helps.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome?sp4ts.Oid=5359412&AC.admitted=1404004661553.876444892.492883150

  Please update with the State.

• Random letters appear after you save the PDF file

  Hi all

  One of my colleagues has found that a part of the text is after registration of a PDF document and re - open randomly changed. She works in Acrobat Pro XI.

  In one case, some of the numbers had changed to the decimal (diaphragm openings).

  In another case, a number had simply disappeared (example: 126-128 became 16-1, the 2 and 28 disappeared).

  Still another example text and numbers have been replaced with apostrophes and letters uppercase ' A'.

  It seems that in all cases, only the changes are limited to a particular text box that has been copied and pasted throughout each of the documents. Hereby, I want the text box began to Doc1 and was then copied into Doc2. Rather, I mean that there is a textbox which is copied and pasted on the various pages of the Doc1 and an area of separate text which has been copied across multiple in Doc2 pages and so on.

  Has anyone encountered this problem before? I tried searching for similar cases, without success, if anyone can point me in the direction of a similar position please do not hesitate.

  Otherwise whatever you think I could do to avoid these problems that occur.

  Any help on this would be greatly appreciated.

  Sincere greetings

  Bluekable

  The only solution I found to print a Web page using the Adobe printer is uncheck the box-"rely on system fonts only; do not document fonts ".  This box is available in the Preferences tab after selecting the Adobe printer.

• Strange message appears when searching for the search bar

  This happens whenever I search from the search bar...

  I type a few words into the search bar and press ENTER. Then a small dialog box (subtitled "Application Javascript") appears, displaying a short message: shows "research #2", as the attached picture.»

  I have to press the OK button in the dialog box to close it. The research begins to move forward.

  What does this message mean short? How can I get rid of him?

  Nothing is changed in the "manage search engine list.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Z440: Workstation Z440 Cycles endlesly after changes to the BIOS.

  I made a change in the configuration of the Bios, maybe I changed PCIe options or others by mistake.

  From the start, I had the RED flashing eight times (the ROM Code) with no options on the screen.

  Then I tried to reset the CMOS using the key.

  After resetting the CMOS, to power up, the system seems to cycle endlessly.

  The power light is more red or flashing, white Uni.

  The white disk access indicator flashes constantly while I hear a sound of graduation of the speaker in each cycle.

  There is no interruption or modification of the status of the power led or disk access while this bike takes place.

  Each cycle lasts about seven seconds.

  A note: if I plug in a USB flash drive in a port, it lights once in each cycle, it does not read only.

  USB peripheral lighting such as a Flash drive or a mouse stop with each beat and finally back for a moment.

  Except when necessary, no devices were left plugged into the USB ports, no. trays CD discs while troubleshooting.

  I tried to use a standard VGA interface instead of DVI, still nothing appears on the screen during the power upward.

  I tried to boot with no installed SSD, still nothing appears on the screen.  Same symptoms persist.

  I also tried the Boot Block recover jumper on the motherboard, it causes me to get the RED button with

  eight beeps and flahses once again, still no options for recovery.

  I tried the CD and USB rom image. Recovery methods BIN which are supposed to work without the BIOS menu.

  Without success.

  I recommend that you only call in the HP support and the problem taken care of. The workstation has 3 years of support on site, at least in the United States.

• no window drop-down list appears after you insert the music cd

  Running 32-bit XP Pro - Microsoft Techs after a virus problem, my computer did not recognize one of the 2 discs (CD & DVD/CD Burner) had fixed a problem, but the residue was that no window does not appear after inserting a disc in the drive of CD Play (D).  The window was the choice on what to do to move forward, for example to burn a cd; Open with MS Media Player, etc..  Now, I have to go to the Start button, right click then select Explorer, then scroll down to the CD drive (drive D on my box) and and then proceed from there to listen to a disc.  How can I get this DOS window?  Thank you.

  DMAN

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/330135

  It will be useful.

• Adobe Muse before and after changes in the size of the Widget by itself

  Hello everyone. I started learning Adobe Muse and so far I like it a lot. I downloaded a free Adobe Muse of https://musefree.com/before-after-slider widget

  I seem to have a problem with this widget because it continues to change my size of the specified object by adding pixels. If someone could help me with this, I would be very grateful.

  Here's a screenshot of my Page Properties window. The images, I try to combine for the front / after comparison have a ratio of 2:1.

  

  After that specifying the size of the widget in the transformation Panel and pressing on enter, the pitch changes automatically on 654 pixels for the widget and height Minimum of Page. I am struggling to understand why this is happening. I tried the width and the height of blocking, but I always get the same result. I'm relatively new to Muse, so maybe I'm doing something wrong? Maybe that's a problem of widget? How can I ensure that the object remains in a 2:1 ratio?

  

  I use Adobe Muse CC 2015 on a Windows 8, 64-bit machine. Thanks in advance for any help.

  Best regards
  Vahe

  I don't think that you will be able to use such a thing on Behance. You must validate as two separate files. You may want to confirm that by asking on the forums of Behance.

  Behance

• printed page is not "actual size" even after clicking on the actual size

  I try to print forms from the IRS, but they are smaller than actual size printing.  Same problem with state tax forms.  I also clicked on the option "size" real and always get the same result.

  Sorry I couldn't respond sooner.  Thanks for the suggestion, but unfortunately it did not work. Finally, I went to printer manufacturer online support chat and the tech understood that it was a problem of the browser (Firefox) and opted for Google Chrome and now everything works fine.  Thanks for your effort to help.

• After change of the host, I can't find my old mails, but they still appear in the search...

  Hi all

  I just changed my host and the server settings etc in my account settings for my e mail account. All my old messages disappeared. I guess it's 'normal' when you change the host, but I can still find the emails when I search a specific e-mail address. I can still see the texts of the mails in the search, but when I want to open them I can't. So that means in fact that not deleted emails? Y at - it a possiblity to recover?

  Thanks in advance, Michal.

  If you want to keep messages never change the details or the settings of an older account. Always set up a new account.

  Use of IMAP account, then the messages are stored on the server, so when the service is no longer available to you, the messages on the server will become also unavailable.

  Thunderbird manages a summary of messages. This is probably what will appear in the search. This does not mean that the messages themselves are stored anywhere useful.

• Unable to connect to samsung smart TV after changing to the new edition of premium router N750 WVDR4300

  My old netgear worked very well with smart tv. But after him substituting N750 (replaced for a faster speed), Tv is not see the same network, is - anyone face the same problem of connectivity or network can help solve this problem please? Thank you.

  PS: all other devices like the iphone, tablets and computers are connected well and work very well.

  Resolved - I had to reset the SVC and change the region of wifi on 'A' on TV, and then reset the TV to the factory setting.

  Step 2 - reset the N600 and there you go, TV connected to WIFI.

  Now the other TV I tried the same steps, but it didn't work. So I hooked up Apple TV (I had a spare) and voila, it works now.

• Change of password blackBerry Email Z10. Z10 connects to my server after changing to the new password. 100% sure that password is correct.

  I have two pop3 email accounts Setup on my Blackberry Z10.  They work very well for more than a year.  These email accounts are also configured on my personal laptop.  For security reasons, I changed the password on one of the e-mail accounts.  I knew that this meant that I would then change the password on my laptop and my blackberry.  I edited my email account to mobile with the new password and it worked fine.  But when I edited my e-mail account on my Blackberry, it will not connect to my e-mail with the new password server.  First, he says 'save and check your settings' for a while, then I get a message "the server for your account does not (my server info).  Please check your settings and try again".   I know I typed in the new password correctly.  This is the same as the one I typed in my laptop which worked and I even clicked on the little "EYE" icon in the field password on the blackberry, so I could see what I was typing.  My other e-mail account on the blackberry works very well (I haven't changed the password on this subject) I do not understand why the Blackberry does not recognize my new email password. It should have been a simple change.

  To change the password of e-mail on the blackberry, I chose the SETTINGS, then ACCOUNTS, then I took the e-mail account, that I wanted to change.

  BTW: I work in it then feel free to put it on me

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should translate a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait while the display of the message of a "successful record.

  2) restart

  • Pre-BB10 ONLY devices. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • Peripheral BB10. Hold the top button until the counter reaches zero. Wait for the unit to be completely stopped (for example, nothing appears on the screen, no lights, etc.). Hold the top button until the red light. Wait through the entire boot process. IF this fails, you can try the method of battery-pull above, but it is normally NOT recommended unless nothing else works.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should try remove and re-add your configurations for the relevant accounts.

  Also try the tool of Validation of Email to ensure that the server settings have not changed:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000033444

  If the wizard fails, sometimes using the advanced settings, recording everything manually, can work.

  It's a shame to your mail server remains on the old pop... IMAP and EAS are much more useful IMHO. Well.

  Good luck and let us know!

• Restore from iCloud after change of the Apple ID

  Hi Experts

  Some time ago I went to a different ISP, and I had to pass the email address that I could no longer use the old address of my former ISP. Because of that I had to also change the email address used for my Apple ID. I followed the instructions in the support article inviting you to disconnect all Apple devices before changing the address.

  Today I accidentally deleted some photos from my iPhone as I transfer me other photos on my Mac. I thought that it was no problem since I use iCloud backup to my iPhone and it comes to make a backup. However when you restore the backup I am invited for the password to my old Apple ID (my old email address) in order to restore purchases. But this email address no longer exists I've just updated my Apple ID current with my new email address when I switched to the new ISP.

  I think I saw somewhere that Apple ID it is related to the purchase/app which is also very good - but since it's the real e-mail address and not a kind of SID, who seems to be a problem when you try to restore the backup to iCloud.

  Do you know if there is a way around this?

  Even if the e-mail account does not exist - if you can - I recommend trying the password to the old account on the iCloud ask - if you haven't tried this already of course using the old email ID

  If you continue to have problems then I would contact Apple security and they can help you win your journal in iCloud

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• Little gray box appears after changing preferences

  I'm under FF4 on Mac OS X 10.5.8. Everytime I open the preferences panel and close it, I get a box of gray px 100 x 100 which blocks the left upper corner of the screen (and will even on windows from other applications). The box goes away if I stop FF, but reappears if I open and close the preferences panel.

  This also happens in safe mode.

  Here is a screen shot cropped showing box.

  Mozilla are aware of this problem and are trying to establish the cause.

  • https://bugzilla.mozilla.org/show_bug.cgi?id=641288 - opens window of preferences off the screen without title bar, leaves white square when closed, can not be moved
  • https://bugzilla.mozilla.org/show_bug.cgi?id=636937 - a cube-shaped square 'dead' after the opening and closing of the preferences

• Windows XP - recognition USB keyboard/mouse after change in the BIOS

  I moved to use a mouse and a keyboard that is connected via PS/2 ports for a new keyboard and mouse which connect via the USB ports.  The BIOS was originally installed to recognize the keyboard and the mouse through the operating system, but to use the start menu (e.g., to be able to press the 'Del' key to access BIOS), the BIOS must be set to recognize the keyboard and mouse via the BIOS.

  The problem is that in this way, Windows does not recognize the keyboard and mouse.  Is there a way to fix this?  I would like to have the keyboard and mouse recognized at startup so that I can access the start menus and the menu of the BIOS, but it does not help much if I can not then use Windows.

  I guess he has put something in Windows during installation which checks the BIOS settings to determine how to access the keyboard and mouse.  Is it possible to change this setting to Windows?  Possibly through the procedure of "repair"?

  Thank you

  George

  Check all revisions of the BIOS for your system.  You might be unluck and you might be stuck with this problem.

• do you know how I can record a short video sequence after change in the same format as the original Ant is in format .prel?

  I want to sequencse updated the short clip to use them in a slide show.

  When I changed the sequence I can only save with a format of PREL.

  I want to save it in the sam format as the original (as in photo).

  Thank you if you have the answer

  The file .prel is the Premiere Elements project file. It is not the real media or video.

  As Ann will probably, when you have finished editing your video, you'll be out the video finished, edited in any format you want using the tools on the part of exports &.