Strange problem using cloned hard drive - Equium L20

Similar Questions

• Qosmio G30 (PQG31) - problem with cloned hard drives

  Hi all!

  * Qosmio G30-154 * (* PQG31 *).

  Demo of the Qosmio has 2 hard drives with XP MCE (32 bit) installed on the primary.
  The RAID parameters are JBOD.
  BIOS is "newer" 3.90

  I would try to upgrade the drives (without installing any OS) and... have a problem!
  BSOD "Stop 0x0000007B" after 'clone with resizing' for the main HARD disk.

  I read on [drivers Toshiba RAID | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48489] also [how to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm] and (or)
  [SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations | http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm], but I don't want to install OS, I want to keep intact my OS work.
  F6 (for all usb drivers) is not available to boot OS, sorry.

  "cloned" drive is in line with the correct name of made in the BIOS. "Cloned" secondary drive works (with old primary school). How to get access to the new primary OS and loading cloned? Please, any ideas?

  Thank you.

  Hello

  I think that the system cannot boot to the new HARD disk as the partition where the system is installed, was not marked as bootable system partition.

  I recommend to insert the previous HARD drive and to start the laptop.
  HARD drive new, cloned could be connected as an external HARD drive to a USB port.

  Then you should go to disk management (right click my computer - manage-> management-> disk management computer)
  Here you can see the HARD internal disk and the 2nd HARD drive connected to the USB port
  Right-click on the partition (2nd HARD drive) where the Win XP has been installed and choose the partition as the system partition and mark it as active.

  Then you could change the HARD drive again and could power the device in place. Usually, the system should boot to the top of the new marked system partition.

• Satellite L350D-21 problems using new HARD drive recovery recovery disks

  Hello

  I have laptop SATELLITE L350D-212 with windows 7 Home premium OA.
  He started to complain that there is something wrong with the hard drive so I went and bought another hard drive of the same size.

  I created the recovery disk when the computer was purchased and have backup of all the data in an external hard drive.

  After I changed the new hard drive to the laptop and tried to boot from the recovery disc, nothing happens eventhoug I can see it seems to be all Ok with the disc.

  Any ideas on how to get to run to the new hard drive recovery?

  I have the old hard drive attached as external drive via the USB port, but cannot boot from that too. It just stops at a certain point and told to stop.

  Hello

  Usually, the recovery disk must format the new HARD drive but I recommend you to join the new HARD drive as an external device to another computer and format the new HARD drive before trying to recover the laptop.

  Once the HARD drive has been formatted, connect it to the L350D and boot from the recovery disc

  Good luck

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• The cloned hard drive file recovery?

  Hi I need to know, I had my old hard drive blue screen error frequently, my IT guy said to replace hard drive again, it changed and kept the old drive with him, after 1 1/2 years, I've wanted an important delete file to recover old hard disk, I took the old hard drive from this GUY I could not this file, I got to know that the computer scientist has cloned that old hard drive in another new hard drive, is possible to retrieve the deleted files in my old drive hard new cloned hard drive

  Hope you understand my question,
  Please me tips

  Hi Raghu,

  Thanks for posting your query in Microsoft Community.

  I understand the concern to recover files from hard drive which has already abolished. For now, I'll ask to refer to suggestions provided by Linney, MVP, in the thread below link and check if they help.

  Recover deleted files from external hard drive

  Suggestions may be applicable to Windows 7 as well

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Satellite P300-135 system issues using two HARD drives

  About a month ago I bought a faster hard drive for my laptop (because it wasn't hard drive 5400 RPM by default), and computer technicians to the store where I bought my laptop has recommended a Seagate Momentus 7200.4 250410.

  The first couple of days everything went smooth, but after that, every second, restart my OS (Windows 7 Ultimate 32 bit) reports of problems with my video card, sometimes 'Windows cannot initialize the device of this hardware driver. (Code 37) ", the other time"Windows has stopped this device because it has reported problems. " (Code 43) ", and when this error occurs, the keyboard and the keyboard do not work too.
  I made a simple and primitive diagnosis by deleting the second hard drive and rebooted 5 or 6 times, and everything went very well.

  So I think the problem is that the laptop has not enough power for two hard disks. Is it true, or is my phone begins to fail?

  Sorry for my mistakes of language, but English is my second language.

  Hello

  Usually the second HDD should not affect the performance of the system, but it of impossible
  So maybe you should test the specifications and performance of OS using another HARD drive maybe a HARD disk that takes in charge of 5400 RPM

• Can satellite M70 - I use all hard drives 2.5 "?

  All HDD 2.5 "can be put in Satellite M70 or they must have specific dimensions? For example, I thin on Samsung spinpoint [model: http://www.pricerunner.com/pl/36-765680/Hard-Drives/Samsung-SpinPoint-T166-320GB-SATAII-7200rpm-Compare-Prices].

  It will be OK for my laptop?

  Hello!

  As far as I know the Satellite M70 was available with hard drives SATA and IDE hard drives. If you have a SATA HDD, you can use this HARD drive.

  The Satellite M70 takes to load only SATA150 (SATA1) but this isn't a problem. All SATA2 HDDs runs SATA1 mode and are 100% compatible.

  Good bye

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• I built a computer by using the hard drive of my laptop which has windows 7 Home premium on it and I get messages to activate windows

  Recently, I built a computer, but I get messages from windows activation; I used the hard drive of my laptop which had windows 7 Home premium top and I never had any problems with it. Can anyone help?

  Original title: validation of Windows

  >to be filled by O.E.M. power O.E.M. American Megatrends Inc.. 1101

  Based on your report, you seemed to have changed the motherboard.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  You can try the phone activation, there is no guarantee:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I have a problem in my hard drive, it shows me in the properties I have more space than in the computer

  Hi Microsoft community
  I have a problem in my hard drive, it shows me in the properties I have more space than in the computer
  How is it possible that? Where is the rest area?
  same question under the D; disc
  http://www12.0ZZ0.com/2013/09/22/16/490351854.PNG

  

  Kind regards.

  Hi Microsoft community

  I have a problem in my hard drive, it shows me in the properties I have more space than in the computer

  How is it possible that? Where is the rest area?

  same question under the D; disc

  http://www12.0ZZ0.com/2013/09/22/16/490351854.PNG

  

  Kind regards.

  Both say the same thing - 120 GB of free space. 128 886, 263, 552 bytes is 120 GB and 128 GB not

  All hard drive manufacturers qualify 1 GB 1,000,000,000 bytes, while the rest of the computer, including the windows world, defines it as the 2 to the 30th power bytes (1 073 741 824). So, for example, a disk of 320 billion bytes is actually around 300 GB.

  Of some note as the official international standard
  sets the 'G' of GB as 1 billion, not 1 073 741 824. OK, even though they were, using the binary value of GB is so well-established in the world of computing that I consider be misleading on the part of the manufacturer of marketing using the decimal value of 1 billion.

• the size of your hard drive is not supported for this process. Please use a hard drive at least GB in size

  Whenever I try to use my restore disks of backup with the image of the system when I bought my Dell 8300 desktop computer I get this error message (your hard drive is not taken in charge for this process. Please use a hard drive at least GB in size.

  My computer crashed went to blue screen that wouldn't everything now I hear 4 beeps, finally I managed to do start on. I already ran the long diagnoses everything was fine.

  Here's my problem. I changed the Sata AHCI RAID mode I could create a partition then my Windows 7 downloaded CD Windows 7... my CD of drivers dell drivers, but now I'm unable to use my system restore CD to restore like I always do when I have a problem. When I changed the sata mode to AHIC on load it says (lack of operating system)

  I'm not very technical, so if someone can show me step by step on what I should do or give me a call [Admin Note: personal information removed] I would appreciate it a lot. I've added a few pictures as well

  

  

  Large. I am pleased that my DBAN guide has helped you.

  Now that you are on the factory settings, I advise Dell DataSafe Local Backup uninstall and upgrade to the latest version of Dell backup and restoration which has many bugs/improvements, including the ability to restore to another hard drive which is useful in case the hard disk fails in the future or you decide to upgrade later to an SSD. The XPS 8300 running perfectly with a SSD, I have mine put in place with one. Then you can create a Rescue Disk (external hard drive Bootable) or Backup factory (Bootable USB Flash Drive) that will be promoted the recovery compared to the facts media with Dell DataSafe Local Backup. See here for more details:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Note This is not a UEFI BIOS (he missed just out on the passage to the UEFI) but may start from an external hard drive.

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• Photos uses iCloud only or can I simply use your hard drive?

  I am confused in regard to if I can store photos using the Photos app on my hard drive or are they only stored on the iCloud?

  Thank you very much

  Photos by default uses your hard drive. It will use only iCloud if you have iCloud lit Photos, and even then he keeps a copy of your photos on your hard drive.

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  Welcome to the Apple community.

  Locate in iCloud drive in your Finder, drag to where you want to save them on your Mac, confirm, you want to move them when the Finder prompts.