Strange question NLS-linguistic using OracleXe

Similar Questions

• Equium L40 - strange question burning files using burning CD Toshiba Software

  Under VISTA and using the utility software burning CD from Toshiba.
  If I do very short essay three example b.wav c.wav files and burn them to a CD - RW, I get three burned files and they play fine on my CD player.
  But they are the wrong set of files!

  I usually find two or more copies of a file and one or more missing files.

  For example, I could get b.wav or b.wav b.wav c.wav b.wav example.
  All of the files I get seems random and different every time I have to erase and burn again.

  I have to give up the Toshiba utility and return back using Nero or I found a way to ruin a perfectly good software utility?

  I put t know how you burned these files and the options that you have chosen, but I have never noticed such problems using the software Toshiba of engraving.
  However, I prefer Nero burning rom. This software is my favorite and I use Nero despite Toshiba installed software of engraving on my laptop

  Best regards

• Strange question filter everything using the @UDA function

  I created two filters for users to write in the database only when the specified UDA exists in outline. The first filter works very well it is said than the year that has the specified UDA, users can write, but filter 2 allows users to write in the database even if the specified UDA does not exist in the outline.
  
  Group1: @IDESCENDANTS (ABC000), Bud, Budbase, @UDA (years, "Bud open"), @UDA (period, 'Bud Open')
  
  Users can only write to Budbase for the year and the month with 'Bud Open' UDA, works very well.
  
  Filter2: @IDESCENDANTS (ABC000), kitchen, Fcstbase, @UDA (years, "Open kitchen"), @UDA (period, "Open kitchen")
  
  Users can write the script of Fcstbase even if none of the members of the year or month have "Open kitchen" infact UDA UDA is not anywhere in the general plan.
  
  ABC000 is a member of the entity dimension, Budbase/Fcstbase are members of level zero dimension Scenario and the children of Bud/Fcst. I use sys 9.3.1.3 Essbase and I created a test user ID who has access at the server level and only access these filters.
  
  Can anyone suggest what could be the problem with filter2.

  Perhaps insert your outline of some members of the dimension fictitious year/time and when you do not want users to be able to write anything, assign the UDA dummy members.

• strange question use stop() to control a scenario after loadClip

  Hello, I have this strange question:

  I want to control the scenario of a swf file loaded with loadClip command.

  I wrote this code

  var loader: MovieClipLoader = new MovieClipLoader();

  loader.addListener (this);

  function onLoadComplete(_mc:MovieClip) {}

  _mc. Play()

  };

  loader.loadClip (swfname, _root.holder)

  function pause() {}

  _root.holder.stop)

  }

  function pause a button is used to stop playback of the loaded movieclip.

  strange thing is that stop() works when you test the movie by the flash application and plays from the projector. It DOES NOT WORK when he runs by embed code html in swf or swf directly.

  I checked a lot of time and the name of the 'container' is resolved, but the command does not work for his screenplay.

  thanx for help

  Daniele

  you wouldn't expect this stop() never work.  Once the loading starts, stop() no longer applies to the target of a loadClip (or loadMovie) method.

  to resolve, use the stop() on the first frame of the loaded swf file editing.

• Strange question, craps remaining after the system recovery on my windows xp desktop.

  Strange question, thank you for your comments!

  I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.

  Furthur inspection on the system to reveal problems:

  1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.

  2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.

  3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family.  On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.

  I had done some restorations system on this computer before, I never noticed a problem like this before.

  1 have we seen this before?

  2 I forgot something?

  3. can I safely delete the original user profiles and records under the program folder program files?

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?

  Thanks for reading my long message!

  1 have we seen this before? I saw something similar and other relief to be fixed.

  2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.

  3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.

  http://support.HP.com/us-en/document/bph07145

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.

  Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.

• Strange question - width ListItem

  While developing applications, I noticed a strange question.

  When I draw list in qml item available, it's very nice on an excerpt:

  I put

  horizontalAlignment: HorizontalAlignment.Fill
  

  and the width of the list item fill all empty space, but when I check the list on Simulator it encapsulates the width of content?

  Does anyone know how to set the width of the listItem to fill all the space from left to right?

  To sum up,

  I want to have (and it looks like this on qml overview):

  

  but I get this (width of list point fits only the content):

  

  Thanks in advance.

  Hi, there may be simpler but for me it works using the spaceQuota:

  ListItemComponent {
      type: "item"
      Container {
  
          background: Color.Red
          Container {
              preferredHeight: 230     
  
              layout: StackLayout {
                  orientation: LayoutOrientation.LeftToRight
              }
  
              Container {
  
                  layoutProperties: StackLayoutProperties {
                      spaceQuota: 1
                  }
               }
           }
       }
  }
  

• Strange question - data double on table 12 c JDev

  Hello

  I have a strange question in my table. I use Oracle JDeveloper 12 c. In my page, I use 2 VO and a secondary has a problem with the display of data - it displays two times. Heard that I deleted the table and put it in my page and always the same problem.

  No matter if I have all the data to my record in the table primary or not, when there are data to display then it shows twice. I do not know it can help, but for more information table is located in the popup.

  Anyone have this problem?

  Kind regards

  WK

  You must specify exact jdev version (there are two versions of 12 c)

  I had this problem in 12.1.2(a il y a longtemps, et à cause de trop de bugs dans cette version je n'a pas pris la peine de trouver la raison), but it seems that this problem went to 12.1.3(at moins, pour mon application)

  Dario

• This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switchi

  This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.

  If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?

• Strange question USB CPU intense operations...

  So I was hitting this strange question lately with my R4 Aurora...

  During an intense application or game, the power of my keyboard & mouse will start go on and outside... fan start office turns up and down at the same time. The computer will continue to function, but as the USB power goes on and outside, I can't use the keyboard to stop. I can hit the power button on the computer and usually it stops just fine.

  Could be that your diet is more stressed.

  If you connect a USB2 Hub supplied with 50W power brick, what happens?

• strange question by inserting the data...

  Hi everone,
  
  I have a strange question. I'm not looking I do something wrong or is this a bug?
  I do a simple ' insert into table (select statement). Everything is ok... It's inclusion. But when I run the
  "select statement" separately (actual data I need to insert), I get different data inserted in the table.
  
  -> I have observed something else where there is a "case statement" in the selection m than the data in the table are spoil...
  
  EX:
  
  SELECT TRIM (member_span.member_nbr) member_nbr-> this one I see the correct data
  (
  CASE
  WHEN SUBSTR (member.member_nbr, 10, 2) = '00' THEN TRIM (member.member_nbr)
  Of OTHER SUBSTR (member.member_nbr, 1, 9). '00'
  END Subsciber_nbr),-> This data are spoil seeing incorrect data in the table...
  
  
  Database version:
  
  Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
  PL/SQL Release 10.2.0.2.0 - Production
  "CORE 10.2.0.2.0 Production."
  AMT for HP - UX: release 10.2.0.2.0 - Production
  NLSRTL Version 10.2.0.2.0 - Production
  
  < b > "" "did exactly the same thing in a different database. I don't have any problems out there"" "I'm getting problem only with this database < /b >"
  
  Anyone know a bug related to this problem?
  

  INSERT
  INTO member_load(member_nbr,   subscriber,   ymdbirth,   security_group,   group_nbr,   network_id,   cob_date)
    (SELECT TRIM(member_span.member_nbr) member_nbr,
      (
     CASE
     WHEN SUBSTR(member.member_nbr,    10,    2) = '00' THEN TRIM(member.member_nbr)
     ELSE SUBSTR(member.member_nbr,    1,    9) || '00'
     END) subsciber_nbr,
      (
     CASE
     WHEN LENGTH(member.ymdbirth) = 8 THEN member.ymdbirth
     ELSE NULL
     END) dob,
      (
     CASE
     WHEN TRIM(member_span.group_nbr) IN('108076',    '108077',    '108078',    '108079',    '108080',    '108081') THEN 'E'
     WHEN TRIM(member_span.group_nbr) IN('107001') THEN 'M'
     WHEN TRIM(member_span.group_nbr) IN('107005') THEN 'J'
     ELSE 'A'
     END) security_grp,
       TRIM(member_span.group_nbr),
      (
     CASE
     WHEN TRIM(member_span.business_unit) = '01' THEN 'N' || TRIM(member_span.business_unit) || '-' || TRIM(member_span.prog_nbr)
     WHEN TRIM(member_span.business_unit) = '03' THEN 'N' || TRIM(member_span.business_unit) || '-' || TRIM(member_span.prog_nbr) || '-' || TRIM(member_span.carrier)
     ELSE NULL
     END) network_id,
  
      (
     CASE
     WHEN LENGTH(member.ymdverify) = 8 THEN member.ymdverify
     ELSE NULL
     END) cob_date
     FROM member_span @dblink,
       member @dblink
     WHERE member_span.ymdeff > 20090908
     AND member.member_nbr = member_span.member_nbr
     AND TRIM(void) IS
    NULL
     AND member_span.member_nbr NOT IN 
      (SELECT member_nbr
       FROM member_span @dblink
       WHERE(20090908 BETWEEN ymdeff
       AND ymdend)
       AND TRIM(void) IS
      NULL)
    )
  ;

  Please help me with this question...

  Marella Phani wrote:

  sven
  
  different NLS settings....
  How can i find the NLS setting on both the databases..
  can i query some metadata table to find that..
  

  Please let me know how to proceed

  Anurag...

  It is not the problem with my SQL (that I know of). It gives a correct output that I need when I simply run the SQL query.
  I just give a few examples of data (no real data).

  But when I run Insert in staging_table (select statement). I do not see the correct data in staging_table...

  Thanks for all the replies...

  You can check your NLS settings with

  select name, value, isdefault from v$parameter where name like 'nls%';
  

  or in sql * plus with

  SQL> show parameter nls
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  nls_calendar                         string
  nls_comp                             string
  nls_currency                         string
  nls_date_format                      string
  nls_date_language                    string
  nls_dual_currency                    string
  nls_iso_currency                     string
  nls_language                         string      AMERICAN
  nls_length_semantics                 string      BYTE
  nls_nchar_conv_excp                  string      FALSE
  nls_numeric_characters               string
  nls_sort                             string
  nls_territory                        string      AMERICA
  nls_time_format                      string
  nls_time_tz_format                   string
  nls_timestamp_format                 string
  nls_timestamp_tz_format              string
  SQL> 
  

  Please be careful, that my comment about to_char was that under the assumption that you have a column for the number. If the column is VARCHAR2, do not add an extra TO_CHAR around this column. He could not give problems, but is not necessary (I think it can give problems in 9i, but impossible to find a small example yet).

  An idea to find the source of your problem would be to change the NOT IN subquery. At least in a NOT EXISTS a subquery. Or even better find a way to access the remote tables only once instead of twice.

  not exist

  INSERT
  INTO member_load (member_nbr,   subscriber
  )
  (
    SELECT TRIM(ms.member_nbr) member_nbr,
      (
     CASE
     WHEN SUBSTR(ms.member_nbr,    10,    2) = '00' THEN TRIM(to_char(m.member_nbr))
     ELSE SUBSTR(to_char(ms.member_nbr),    1,    9) || '00'
     END) subsciber_nbr
     FROM member_span@dblink ms,
       member@dblink m
     WHERE ms.ymdeff > 20090908
     AND m.member_nbr = ms.member_nbr
     AND TRIM(ms.void) IS
    NULL
     AND NOT EXISTS
      (SELECT null
       FROM member_span@dblink ms1
       WHERE (20090908 BETWEEN ms1.ymdeff AND ms1.ymdend)
       AND TRIM(ms1.void) IS NULL
       AND ms.member_nbr = ms1.member_nbr)
  
  )
  ;
  

  Is ymdeff a number or a string? If it is a string, then change 20090908 in '20090908'. If it is a number then keep as it is.

• If the hard disk dies this affect router/WiFi?  I know that this seems to be a strange question.

  If the internal hard drive dies this affect router/WiFi?  I know that this seems to be a strange question.  Logically, they seems to be two independent functions.  However, since I do not understand how it works...

  I plan to spend my old airport extreme (about 7 years) at an airport new Time Capsule or Airport Extreme for better wi - fi range.

  Where the internal hard disk come into your Airport Extreme or Time Capsule dying airport upgrade?

  If the disc is dead, it will be not not to be replaced. This should be done first before to other devices.

• I have questions on the use of the commercial license... Which forum should I use to get answers or how I can get in direct contact with adobe?

  I have questions on the use of the commercial license... Which forum should I use to get answers or how I can get in direct contact with adobe?

  I have my answers! The chat feature did not work well... But I had contact, so everything is good now!

  Thanks again!

• I have a question on the use of CS adobe CS6 editing files

  I'm a graphic designer. I have a question on the use of CS adobe CS6 editing files. When I open adobe CS files created at CS6 edition thse I get a variation of the color that I did with the CS version. Please give me an idea about this problem as soon as possible. If you need I can download my problem as a screenshot for clearity

  

  donrulz,

  Are your Edit > settings the same colors?

  Spot colors, such as Pantone (there there were some changes in the CMYK values with new books of color) that you use?

• Strange question: How do new dimensions go upwards, not downwards?

  Hey, I have a strange question. When I change the dimensions on a document and for example make it bigger, the bottom becomes higher in the direction down. But... How can I get, if you know what I mean? When I do the larger dimensions, why he cant increase upward?

  Does anyone know how to do this?

  The dimensioning of the scene is based on the top left corner, any change in the size will be push to the right or down.  You can't change what I know.

• Strange question by using a layer to key as hidden by approach

  Hello world

  I have a strange problem on a model that I work with and because of the way his game upward and the pre comps etc, I don't know yet how to ask questions!

  So, please excuse the next long-term, attempt to explain:

  (1) to start:

  I have a comp with 3 layers of images. A background image Moving 4 K of video blocks, interpreted at 25 fps. A clip of R3D of one of our ships, the camera on a tripod and the ship "Waggling" kept a little up and down - in RAW mode for own overlay. A duplicate of this layer, used as the color corrected layer.

  I have a comp that contains the raw footage, key and then set it to the color corrected images below, Alpha matte.

  

  Above is the settings and exit from the squadron of ships.

  It is then precomped and engine lights, streaks and propellants etc. are added with Null objects, lights, optical flares including:

  

  at this point, everything is great, it is then more precomped in a new comp, where it is placed above the background layer - and here is where the problem occurs. It's almost as if the trackmatte is a frame or two behind the color layer:

  <-note the blue edging to the blue screen.

  I followed these layers and back up the precomps, and I can't understand why this happens? I guess I made a really stupid mistake and will gladly apoligize publicly when I find it!

  I don't know what else I can send to help understand this (keyframes on the trackers above there, and the precomps of drag to position and scale change over time on the layer of ship in the final model.) If I pull the precomp ships in the final model as a new layer - the problem remains. If I double click to open the layer of the vessel, the question is not visible.

  Well, that's it. Thank you all.

  Stone

  Why did you settle your final model to 29.97 FPS rate?