Strange thing in the SQL and PL/SQL

Similar Questions

• Why my laptop wireless computer connect to the internet first thing in the morning and late at night, but not during the day.

  I wonder if you can help me please?

  I have problems with my satellite internet access on my laptop wireless.  He beautifully connects to the router and the signal is excellent. However, I'm unable to connect to the internet.  I can use the laptop first thing in the morning because it connects right away, but I would say that 95% of the day I can't use it at all.  Sometimes it will work later in the evening.  I learned this could be due to the intensity of the signal and that some suppliers to fall during the day.  My desk top connects perfectly (if the weather permits it) but is not on the wireless network.  I had no problem with my laptop when I used my previous service provider.  It becomes more frustrating that the inability to use the internet visited my lap top unnecessary.  I can't use it on my neighbors wireless network no problem at all but they we internet different provider.  Can you please help because I don't know why it works first thing in the morning and sometimes late at night, but not during the day?  No matter where the lap top is the first thing in the morning, it will work even if it is forty feet away.  I can sit during the day with my phone right by my router and it still not connect to internet even though the router signal strength is excellent and desktop is on the internet.  Any help would be great, because it leads me into the wall!  I am using WIndows 7 on my lap top from acer.

  Kind regards

  Julie

  I would like to thank everyone for their help with my question.  I can tell you now that I have it solved and I'm pretty embarrassed to say the least.  Following a change of internet service provider, I put a cable into the wrong port on the router... silly me!  It works perfectly now. Thank you once again.

• Strange thing happening with ASA and RDP by filtered VPN

  Hello

  I'm hoping to get support here anymore as I am clearly out of options.

  I have 3 ASA 5505 2 and a 5510

  all of them are connected via the internet by VPN

  a 5505 is on my principles and I use VPN to serve 2 other sites that belong to the same customer. Clearly, I want to go the VPN will aswell to localities other than traffic from them.

  the strange thing is if I put an IP address a whole on the acl filter can I use RDP, for when I apply the filter, where I activate TCP/3389, I get an error that the server is not found.

  in forestry, I see the package hit the ACL:

  
  <167>:Jul 05 21:13:19 CEDT: %ASA-session-7-106102: access-list VPN_Filter permitted tcp for user '' User-Lan/192.168.1.87(58603) -> XS4ALL/172.31.2.12(3389) hit-cnt 1 first hit [0xbe2548e2, 0x0]
  <166>:Jul 05 21:13:19 CEDT: %ASA-session-6-302013: Built outbound TCP connection 43436 for XS4ALL:172.31.2.12/3389 (172.31.2.12/3389) to User-Lan:192.168.1.87/58603 (192.168.1.87/58603)
  
  VPN filter:
  access-list VPN_Filter extended permit ip any any log debugging inactive
  access-list VPN_Filter extended permit object RDP object-group DM_INLINE_NETWORK_8 object Lan-Pat
  access-list VPN_Filter extended permit udp object-group DM_INLINE_NETWORK_4 object Lan-Pat eq tftp
  access-list VPN_Filter extended permit icmp object-group DM_INLINE_NETWORK_1 object Lan-Pat log debugging
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_3 object Lan-Pat eq www
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_5 object Lan-Pat eq https
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_6 object Lan-Pat object-group DM_INLINE_TCP_1
  access-list VPN_Filter extended deny ip any any log debugging
  
  any help will be greatly appreciated!
  			 
  If do you a RDP from your PC to the client session, port TCP/3389 is used on the client side and not on your side. So your ACL should be the following:
  VPN_Filter list extended access permitted tcp 172.31.2.0 255.255.255.0 eq 3389 192.168.1.0 255.255.255.0
  Remember: in a VPN-filter is the syntax = remote destination, local = source. Port 3389 is on the remote end.
  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  
      http://www.Kiva.org/invitedBy/karsteni
  		   

• There is no toolbar with things like the file and history, how do I get it back?

  The toolbar in the upper left corner with things like file, bookmarks and history appears on the browser firefox... what should I do?

  This has happened

  Each time Firefox opened

  is yesterday, when my computer has installed an unknown update

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• Strange problem with the KING and IMAQ find right 3 edges

  So first of all, I noticed that the KING produced by KING features seems to have an incompatibility with the entrance to find right IMAQ 3 edges:

  

  In my code, I have the strange problem "IMAQ find right edges 3" is the production of edges that lie outside the limits by the wired KING specifided: "."

  

  In this case, a return on investment, defined by a rectangle, I [476, 1559, 752, 1779], but the best line produced by VI shape is outside this rectangle (see ordered 1876).

  How is that possible?

  I finally thought to it - it was my fault. I was updating the global rectangle in the KING entered correctly, but not the contours.

  I fixed the wiring and now it works fine.

  Detective Conan!

  G

• strange bands on the forecast and the final video

  Hi guys

  This is my first step with the first and I started with my my DJI Phantom 3 drone video and I got these strange travel yellow

  not when I run all videos, but as soon as I am, I have

  all ideas

  Thank you for your time and have a great day

  

  It is a known problem with El Capitan.

  Disable the MPE material in project settings for now.

• Strange gaps in the header and footer

  Im getting gaps in the header and the footer on some of my pages.  Sometimes, the gaps are filled with the background color of the column and other times they are the color of the body that is even stranger.  An example would be http://www.mojogar.com/pcRepair.aspx .  In IE8, I get a gap on the top but not the bottom.  In Firefox3, the gap is on the bottom and not the top.  ???

  This is the page for markup;  (followed by the CSS)

  < % @ Page Language = "VB" ContentType = "text/html" percent >
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  "< html xmlns ="http://www.w3.org/1999/xhtml"> <!-InstanceBegin template="/Templates/masterOne.dwt.aspx ' codeOutsideHTMLIsLocked = 'false'->
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  <!-InstanceBeginEditable name = "doctitle"-->
  < title > Untitled Document < /title >
  <! - InstanceEndEditable - >
  <!-InstanceBeginEditable name = "head"->
  <! - InstanceEndEditable - >
  < link href = "thrColHybHdr.css" rel = "stylesheet" type = "text/css" / > <!-[if IE] > "
  < style type = "text/css" >
  / * place patches css for all versions of Internet Explorer in this conditional comment * /.
  .thrColHybHdr # sidebar1″, .thrColHybHdr #sidebar2 {padding-top: 30px ;}}
  .thrColHybHdr #mainContent {zoom: 1; padding-top: 15px ;}}
  / * the owner above zoom gives IE the hasLayout property, avoid several bugs * /.
  < / style >
  <! [endif]-->
  < script src = "SpryAssets/SpryMenuBar.js" type = "text/javascript" > < / script > "
  < link href = "SpryAssets/SpryMenuBarVertical.css" rel = "stylesheet" type = "text/css" / > "
  < link href = "SpryAssets/SpryMenuBarHorizontal.css" rel = "stylesheet" type = "text/css" / > "
  < / head >

  < body class = "thrColHybHdr" >

  
  < div id = "container" >
  < div id = "header" >
  <!-end #header->
  < div class = "fltlft" > < img src = "images/mojoLogoSmall.png" alt = "digital Mojogar design & amp; PC repair' width = '172' height = '41' border = '0' well = "#Map" / >
  < name of the map 'Map' id = 'Card' = >
  < area shape = "rect" coords = "2,2,172,39" href = "default.html" target = "_self" alt = "House Mojogar" / > "
  < / map >
  < / div >
  < div class = "fltrt" > <!-InstanceBeginEditable name = "HeadRight"-> HeadRight <! - InstanceEndEditable - >
  
  < / div >
  < div class = "MenuVertDiv" >
  < ul id = "MenuBar2" class = "MenuBarHorizontal" >
  < li > < a class = "MenuBarItemSubmenu" href = "#" > < /a > Design
  < ul >
  < li > < a href = "webDesign.aspx" > Web < /a > < /li > design ""
  < li > < a href = "webDev.aspx" > creating websites < /a > < /li >
  < li > < a href = "logo.aspx" > creation of Logo < /a > < /li >
  < /ul >
  < /li >
  < li > < a href = "#" class = "MenuBarItemSubmenu" > < /a > Animation
  < ul >
  < li > < a href = "webDev.aspx" > Animation Flash < /a > < /li > ""
  < /ul >
  < /li >
  < li > < a class = "MenuBarItemSubmenu" href = "#" > Support < /a >
  < ul >
  < li > < a href = "pcRepair.aspx" > PC Repair < /a > < /li > ""
  < li > < a href = "virus.aspx" > Virus < /a > < /li > ""
  < li > < a href = "email.aspx" > Email < /a > < /li > ""
  < li > < a href = "backup.aspx" > backup data < /a > < /li > ""
  < li > < a href = "wireless.aspx" > wireless < /a > < /li > ""
  < li > < a href = "software.aspx" > software < /a > < /li >
  < li > < a href = "hardwareInstall.aspx" > hardware < /a > < /li > ""
  < li > < a href = "server.aspx" > repair of server < /a > < /li > ""
  < li > < a href = "busConsult.aspx" > Consulting < /a > < /li > ""
  < /ul >
  < /li >
  < li > < a href = "contact.aspx" > Contact < /a > < /li > ""
  < /ul >
  < / div >
  <! - end header - > < / div >
  
  < div class = "masterBackground" >
  < div id = 'sidebar2' >
  <!-InstanceBeginEditable name = "rightSidebar"->
  < div id = 'sidebar2' >
  < h4 > when your computer is having problems, have a professional to look over your system to update or repair your operating system, programs installed verification and search for viruses and other malware. < / h4 >
  <!-end #sidebar2->
  < / div >
  <! - InstanceEndEditable - >
  <!-end #sidebar2->
  < / div >
  
  < div id = "mainContent" >
  <!-InstanceBeginEditable name = "main"->
  < div id = "mainContent" >
  < div class = "MarginTopZero" >
  < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase ="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9, 0,28,0" width = "580" height = "300" title = "Computer Support" >
  "< param name ="movie"value="images/flash/PCCollage.swf "/ >
  < param name = "quality" value = "high" / >
  < param name = "wmode" value = "opaque" / >
  "" < embed src="images/flash/PCCollage.swf" quality = "high" wmode = "opaque" pluginspage = "http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type = "application/x-shockwave-flash" width = "580" height = "300" > < / embed > "
  < / object > < / div >
  < h2 > don't not feel lonely when your computer stops.  Computer problems can leave you in the dark about what is wrong.  Help is a call away. < / h2 >
  < h4 > our repair and tune-up service consists of the following: < / h4 >
  update the < /li > < li > operating systems
  updates of operating system < h5 > help the security of the computer and can add features that the manufacturer has worked to make life easier end-user.  Updates as often as every week couple come out on some operating systems. < / h5 >
  audit of programs < li > < /li >
  < h5 > many < a href = "software.aspx" title = "go to our software page" target = "_self" > < /a > applications added over time and can slow down the performance of any PC taking the resources processor and memory, not to mention the hard drive space. " < / h5 >
  < li > Security overlook < /li >
  < h5 > < a href = "virus.aspx" target = "_self" > < /a > anti-virus definitions must be kept up to date. "  Malware, spyware, Trojans and new viruses are always introduced in nature (the internet is a jungle).  Antivirus applications must be updated as well.  Subscriptions to paid suppliers can expire and updates may be trolling for months or even years (I saw happen). < / h5 >
  < li > anti-virus fine tuning < /li >
  < h5 > a lot of antivirus programs is swollen applications and will not stop annoying the user with pop ups and information.  Many users also never know when and how often their antivirus scans. < / h5 >
  browser < /li > < li > configuration
  < h5 > there are literally hundreds of options in the settings of browsers for security and optimization.  Fine these beautiful can in some cases increase surfing speed. < / h5 >
  < li > implementation market & off to the low value < /li >
  < h5 > if your like most people, your PC begins never soon enough.  Get a check full of programs and services which start with your computer and optimize them to increase speed. < / h5 >
  <!-end #mainContent->
  < / div >
  <! - InstanceEndEditable - >
  
  <!-end #mainContent->
  < / div >
  <! - end masterBackground - > < / div >
  
  <!-this element of compensation should immediately follow the #mainContent div in order to force the #container div to contain all the child-> fleet
  < %--< br class = 'clearfloat' / >
  -% >
  < div id = "footer" >
  Copyright Mojogar 2010 < /p > < p >
  <!-end #footer--> < / div >
  <!-end #container--> < / div >
  < script type = "text/javascript" >
  <!--
  var MenuBar2 = new Spry.Widget.MenuBar ("MenuBar2", {imgDown: "..."}) "" / SpryAssets/SpryMenuBarDownHover.gif ', imgRight: ".. ({"/ SpryAssets/SpryMenuBarRightHover.gif"});
  ->
  < /script >
  < / body >
  <! - InstanceEnd - > < / html >

  CSS:

  
  @charset "utf-8";

  {body
  margin: 0; / * It is advisable to zero, the margin and the filling of the body to hold element has a different default browser * /.
  padding: 0;
  text-align: center; / * This centers the container in IE 5 * browsers. The text is then set left aligned by default in the #container selector * /.
  color: #9FEE00;
  do-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
  do-size: 100%;
  background-color: #333;
  }

  H1 {}
  font size: xx-large.
  Color: #000;
  }

  H2 {}
  font-size: XL;
  }

  H3 {}
  font size: large;
  }

  H4 {}
  font-size: medium;
  }

  H5 {}
  font size: small;
  }

  H6 {}
  do-size: x-small;
  }
  {p}
  font size: xx-small;
  }
  H1, h2 {}
  padding-top: 20px;
  padding-right: 10px;
  padding-bottom: 4px;
  padding-left: 10px;
  }

  H3, h4, h5, h6 {p}
  padding-top: 3px;
  padding-right: 5px;
  padding-bottom: 3px;
  padding-left: 5px;
  }

  
  Li {}
  make-weight: bold;
  }
  UL {}
  list-style-type: decimal;
  }
  {of the ol
  make-weight: bold;
  }
  a {}
  }

  
  a: link {}
  color: #FFF;
  }
  a: hover {}
  Color: #333;
  background-color: #6C8CD5;
  }
  a: active {}
  Color: #F00;
  }
  a: visited {}
  color: #FF4848;
  }

  
  / * This hybrid layout tips
  1. from the lateral columns sizing based on the em is based on the user's default font size, you can be sure graphics in the columns accordingly. Built correctly, it is more accessible to those who need larger font sizes, since the width of the columns remains proportionate. If this is not desirable in your design, just change the width of a pixel size and do not forget to change the margins on the div #mainContent accordingly.
  2. given that the sizing of the side columns in this layout are based on the font size of 100% in the body element, if you decrease the overall size of the text by using a font size: 80% on the body element or the #container, do not forget that the column widths will reduce proportionally. You can increase the size of the margins on the side of the #mainContent div, and their widths to compensate for this.
  3. If the sizing of fonts is changed in different quantities on each div instead of on the overall design (ie: #sidebar1 is a font size of 70% and #mainContent has a font size of 85%), this will change proportionally each of the overall size of divs. You can adjust the base on your final sizing of fonts.
  4. the #container div is not necessary for this layout to the width of 100%. You can use to create columns of fake or to limit the width of the layout.
  5. it is not necessary to have the width of 100% on the #container div since, by nature, a div takes up 100% of the available space. Therefore, here, if you want to reduce the size of the global container - leaving perhaps a bit of margin on each side - is already available for adjustment.
  */
  .thrColHybHdr #container {}
  Width: 780px;
  / * margin: 0 auto;  the margins to the center of the page if necessary (in conjunction with a width) auto * /.
  text-align: left;
  padding: 0px;
  margin-top: 0px;
  margin-right: auto;
  margin-bottom: 0px;
  left margin: auto;
  }

  .thrColHybHdr #header {}
  background-color: #C9F76F;
  height: 100%;
  Width: 780px;
  margin: 0px;
  padding: 0px;
  }
  .thrColHybHdr #header h1 {}
  margin: 0;
  padding: 0px;
  }

  / * Sidebar1″ tips:
  1 be aware that if you set a value for the font size on this div, the width of the div will be adjusted accordingly.
  2. as we work in ems, it is preferable not to use the filling in the sidebar itself. It will be added to the width for browsers compatible standards creating a real unknown width.
  3. the space between the wall of the div and the items it contains can be created by placing a margin left and right on these items as seen in the rule ".thrColHybHdr #sidebar1 p.
  */
  {.thrColHybHdr #sidebar1}
  Width: 13em;
  border-top-width: thick;
  border-top-style: solid;
  border-bottom-color: #C06;
  float: left;
  height: auto;
  }
  {.thrColHybHdr #sidebar2}
  Width: 200px;
  text-align: center;
  margin: 0px;
  padding: 0px;
  float: right;
  }
  H3 *.thrColHybHdr # sidebar1″, p.. thrColHybHdr # sidebar1″, .thrColHybHdr #sidebar2 .thrColHybHdr #sidebar2 h3 {}
  left margin: 0px; * / / * the left and right margins should be to all of the items that will be placed in the side columns * /.
  / * margin-right: 0px;
  }
  */
  / * MainContent tips:
  1. If you give this div #mainContent a value of different size of the div # sidebar1″, the margins of the #mainContent div will be based on the font size and the width of the div #sidebar1 depend on the size of the font. You can adjust the values of these divs.
  2. the space between the mainContent and sidebar1″ is created with the left on the mainContent div margin regardless of how content div the sidebar1″ contains, the space of the columns will remain. You can remove the left margin if you want the #mainContent div text to fill the space of #sidebar1 when the content of #sidebar1 is complete.
  3. to avoid falling of float, you may have to test to determine the size of the image/approximate maximum element because this provision is based on the calibration of fonts the user combined with the values that you set. However, if the user has their browser game lower than normal font size, less space will be available in the #mainContent div that you see on the test.
  4. in the Internet Explorer conditional comment below, the zoom property is used to give the mainContent "hasLayout". This avoids several specific IE bugs that may occur.
  */
  {.thrColHybHdr #mainContent
  text-align: center;
  margin-right: 0px;
  margin-top: 0px;
  margin-bottom: 0px;
  left margin: 0px;
  Width: 580px;
  background-color: #2A 4480;
  color: #C9F76F;
  padding: 0px;
  }
  . {MarginTopZero}
  margin: 0px;
  padding: 0px;
  }

  {.busConslt}
  height: 600px;
  Width: 800px;
  }

  idea {}
  height: auto;
  Width: 100%;
  }

  
  .thrColHybHdr #footer {}
  padding: 0;
  background-color: #C9F76F;
  margin: 0px;
  }
  .thrColHybHdr #footer p {}
  margin: 0; / * zero setting the margins of the first element in the footer will avoid the possibility of the collapse of the margin - a space between the div tags * /.
  padding: 0px; / * padding on that element will create space, just as it would the margin, free margin collapse question * /.
  Color: #000;
  }

  
  / * Various classes for reuse * /.
  .fltrt {/ * this class can be used to float right to the item in your page.} The floating element must precede the element it should be next to the page. */
  float: right;
  }
  .fltlft {/ * this class can be used to float an element on your page to the left * /}
  float: left;
  margin-right: 0px;
  padding-left: 5px;
  padding-top: 3px;
  padding-bottom: 3px;
  }
  .clearfloat {/ * this class must be placed on an element div or break and should be the last item before closing a container should completely contain a float * /}
  Clear: both;
  height: 0;
  }
  {#defMainLft}
  Width: 49%;
  float: left;
  text-align: center;
  }
  {#defMainRt}
  Width: 49%;
  float: right;
  text-align: center;
  }
  {.absolRgt}
  position: absolute;
  Top: 0px;
  right: 0px;
  }
  {.relRgt}
  position: relative;
  Top: 0px;
  right: 0px;
  }
  {.defFull}
  position: relative;
  height: 263px;
  Width: 100%;
  border-bottom-width: medium;
  border-bottom-style: solid;
  border-bottom-color: #ff4900;
  }
  {.absolLft}
  position: absolute;
  Top: 0px;
  left: 0px;
  }
  {.defFullTop}
  position: relative;
  Width: 600px;
  border-top-width: thick;
  border-top-style: solid;
  border-bottom-color: #000;
  margin: 0px;
  }
  {.tuneUpTop}
  background-color: #000;
  color: #FFF;
  margin: 0px;
  padding: 0px;
  }
  {.contactForm}
  Width: 470px;
  height: auto;
  left: auto;
  right: auto;
  }
  {.borderRight}
  border: medium solid #A62F00;
  margin-top: 0px;
  margin-bottom: 0px;
  left margin: 0px;
  }
  . {MenuVertDiv}
  margin-bottom: 0px;
  Clear: both;
  height: 38px;
  background-color: #A62F00;
  Width: 100%;
  }
  {.masterBackground}
  background-color: #BF5930;
  margin: 0px;
  padding: 0px;
  }

  Your HTML code contains conditional comments for IE.  Try to reduce or remove the extra padding and see if that helps.

  / * place patches css for all versions of Internet Explorer in this conditional comment * /.
  .thrColHybHdr # sidebar1″, .thrColHybHdr #sidebar2 {padding-top: 30px ;}}
  .thrColHybHdr #mainContent {zoom: 1; padding-top: 15px ;}}
  / * the owner above zoom gives IE the hasLayout property, avoid several bugs * /.
  
  

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• Strange thing in PL/SQL... help me understand why?

  Human resources - Schema
  
  declare
  Start
  insert into values of departments (305, "Gaurav", 10, 90);
  dbms_output.put_line(1/0); -exception
  commit;
  exception
  while others then
  dbms_output.put_line (' ' I caught the exception ");
  end;
  
  
  
  Select * from departments where department_id = 305;
  -no selected lines (305 department_id doesnot get inserted, as expected)
  
  but
  
  declare
  Start
  insert into departments (department_id, department_name) values (305, "Germain");
  dbms_output.put_line(1/0);
  commit;
  exception
  while others then
  dbms_output.put_line (' ' I caught the exception ");
  end;
  
  SQL > select * from departments where department_id = 305;
  
  DEPARTMENT_ID DEPARTMENT_NAME MANAGER_ID LOCATION_ID
  ------------- ------------------------------ ---------- -----------
  Gaurav 305
  
  -305 department_id enters the table, still uncommitted well, but why it is happening?

  Hello

  Since you mentioned the HR diagram,

  SQL> desc departments
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------
   DEPARTMENT_ID                             NOT NULL NUMBER(4)
   DEPARTMENT_NAME                           NOT NULL VARCHAR2(30)
   MANAGER_ID                                         NUMBER(6)
   LOCATION_ID                                        NUMBER(4)
  
  If I run the first code without exception
  
  SQL> declare
    2  begin
    3  insert into departments values (305,'Gaurav',10,90);
    4  dbms_output.put_line(1/0); --- exception
    5  commit;
    6  end;
    7  /
  declare
  *
  ERROR at line 1:
  ORA-02291: integrity constraint (HR.DEPT_LOC_FK) violated - parent key not
  found
  ORA-06512: at line 3
  
  My locations table do not have location_id  90.
  It can be true in your case too.
  
  Where as when I run the second code
  
  SQL> declare
    2  begin
    3  insert into departments(department_id,department_name) values (305,'Gaurav');
    4  dbms_output.put_line(1/0);
    5  commit;
    6  exception
    7  when others then
    8  dbms_output.put_line('I have catched the exception');
    9  end;
   10  /
  I have catched the exception
  
  PL/SQL procedure successfully completed.
  
  SQL> select * from departments
    2  where department_id=305;
  
  DEPARTMENT_ID DEPARTMENT_NAME                MANAGER_ID LOCATION_ID
  ------------- ------------------------------ ---------- -----------
            305 Gaurav
  I am exclusively listing the columns. So the foreign key column location_id here is inserted as null.
  Which is acceptable.
  

  Twinkle

• strange behavior in the SQL with Cascaded NOT operators

  Hi yall!
  
  Quick Tour: I don't use real tables/columns, but simplified versions. And I know that some statements could be turned into a version more simple, but also done these request structures are generated automatically and so I have to work the way they are.
  
  Given a table "MyTable" like this:
  ID MyName
  -- ------
  0 AF
  1 AF
  2 null
  3 AL
  
  The following instructions are tested:
  SELECT id FROM myTable MyName WHERE NOT AS "AF".
  -> Result: 2.3 (as expected)
  SELECT id FROM myTable WHERE NO (NO MyName AS 'AF')
  -> Result: 0.1 (as expected)
  SELECT id FROM myTable WHERE MyName IS NULL or myName = "
  -> Result: 2 (as expected)
  SELECT id FROM myTable WHERE NOT (myName IS NULL or myName = ")
  -> Result: 0,1,3 (as expected)
  SELECT id FROM myTable WHERE (myName IS NULL or myName = ") GOLD MyName AS"AF ".
  -> Result: 2.3 (as expected)
  SELECT id FROM myTable WHERE NOT ((myName EST NULL ou myName = '') OR MyName AS 'AF')
  -> Result: empty (expected: 0, 1).
  
  Why on earth isn't the last statement to return any result?

  0 AF
  1 AF
  2 null
  3 AL

  SELECT id FROM myTable WHERE NOT ((myName EST NULL ou myName = '') OR MyName AS 'AF')
  -> Result: empty (expected: 0, 1).

  the result is as expected:
  (myName IS NULL or myName = ") ===>> you will give output... AF, AF and AL
  Output of GOLD MyName AS 'AF' ===>> you give: AF

  If you do IT for all of them, it will be obivioulsy give you vacuum.

• Weird things on the screen and the watch does not load

  can someone tell me what this means and how to fix it? Was given on the charger for hours, can not, have you tried the new wall charger and no difference

  Your watch is probably too warm. Keep it in a cool room to let it cool down. The third screen is a warning of the temperature.

  Try to load again, after that the watch is cool.  If you are using a case, keep it open.

  https://help.Apple.com/watch/#/apdcf2ff54e9

  For operating temperature requirements, see this page: Keep Apple Watch in temperatures acceptable - operation Apple Support

  Apple Watch is designed to work best with a temperature of 32 ° to 95 ° F (0 ° and 35 ° C) and must be kept between the ambient of-4 ° and 113 ° F (-20 ° to 45 ° C) temperatures.

  For example, Apple Watch should not remain unattended in direct sunlight for long periods, undergoes large changes in temperature or humidity, or be left in a car on hot days. Store and use your device outside the recommended temperature range may shorten battery life or cause other damage.

  Learn more about the management of the temperature for Apple Watch

  If necessary, Apple Watch will regulate its internal temperature. There are several things you might notice if this happens:

  • Charging time may increase, or load could stop
  • The display may dim
  • A temperature warning screen may appear
  • Data transfers could interrupt or slow down the
  • Apps could close

  If your Apple Watch has above normal temperatures:

  1. If you wear your device, turn the power off and remove it from your wrist.
     If your Apple Watch is charging, remove the charger.
  2. Move your Apple Watch to a cooler place and let it cool completely before you put it back on or to continue to load.

• 7.2 conversion to 2015-&gt; 'filter of origin not available' message-&gt; strange borders on the table and anchored frames

  I just convert my 7.2 files to FM 2015 and got some ' original at least a... graphics filter imported by reference... not available..' messages.

  When I looked at those files, I found that several anchored frames were heavy black borders that I could not change and a few tables had borders hatch cross thick strange I could find the same information on.  I guess it's some sort of error condition report, but have not been able to find information about the attachment.

  The affected files tend to be older originating before 7.2 FM

  Any ideas on how to approach the issue?  See photos.

  

  

  I think that both are indicators of conditional text. FM has always used a hatch for the cells in a table. 2015 thus uses an anchored frames border color.

  You can control conditional text at the book level now, in order to hide these is an easy solution: 2015 FrameMaker: conditional text at the book level. Adobe Technical Communication Suite 2015 | Adobe TV .

• strange thing in the region of adf with ireports

  Hi experts jdev,.
  
  
  uses jdev11.1.1.5.0 - adfbc-oracledb10g-mozilla ff 9.0.1.
  
  what I've done,
  
  
  
  I put a page jspx and drag drop the a datacontrol exposed as formatting Panel.
  
  in the Panel, first field of formatting to the formatting of Panel is;
  
  BU (label): MEL (VALUE)
  
  AND A COMMANDBUTTON CONTROL.
  
  IF I PRESS THE BUTTON MEANS CALL SERVLET AND VIA THIS SERVLET VALUE PASS IREPORT3.0.0. TO ONE. JRXML.
  
  
  and will of pdf file opens.
  
  
  ABOVE THINGS WORK WELL. BUT BY COMING UP WITH SAME SCENARIO FOR THE
  
  JSFF. IT IS NOT FUNCTIONAL.
  
  
  what I did to average jsff
  
  
  my project comprisess af:tree.
  
  If I click on link af:tree (leaf) means a jsff (dynamic region) opens on the right side.
  
  in this jsff. I drag and drop a datacontrol as formatting of af: panel. and by clicking on the button call the servlet. value through. He
  
  
  I did system.out.println in servlet. all are work values are correctly
  
  but the pdf does not open.
  
  
  I tried with examples of project but does not work in jsff.
  
  
  that the reason behind this?
  
  
  Timo, john, frank, vinod, jabr, suresh, shay.
  
  could someone help me.
  
  I think I'm worng way.
  
  
  I followed this link.
  http://adfandjdeveloper.blogspot.com/2011/05/this-post-is-to-create-application.html

  Have you tried fileDownloadActionListener?

  Check this Download pdf inside the adf region question

  Published by: in the line of fire on 13 January 2012 09:26

• Strange things in the help windows

  When the cursor is on a tool or a box and should display a reminder of what he must do, I'm the empty boxes or cans with angled text going out of the box.  It's new.  Using the same computer and Photoshop 5, with the last update.  Any help?

  

  

  You can download and install the 12.03 update manually here:

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4949

  MTSTUNER

• Strange problem casting between the DATE and time STAMP

  Hello world
  
  I'm faced with a problem of strange casting between the DATE and time STAMP. Strange, because this happens in SQL-Developer and the Testdatabase, but not when called from inside SQL-Plus, even if all Session settings are set to the top completely equal.
  
  I work on the Oracle 11 g Enterprise Edition Release 11.2.0.1.0 Windows database and run the following script, taken from SQL-Developer script output:
  
  < pre >
  create table ts_test)
  time/date stamp,
  stamp_copy timestamp)
  table TS_TEST standing.
  
  create or replace view vw_test as
  Select cast (date stamp) buffer,
  Cast (stamp_copy as date) stamp_copy
  of ts_test
  view VW_TEST standing.
  
  insert into ts_test
  Select systimestamp, the double null
  1 eingefugt Zeilen.
  
  Commit
  festgeschrieben.
  
  create or replace trigger trg_ts_test_iu
  instead of update on vw_test
  Start
  Update ts_test
  Set stamp_copy =: new.stamp_copy;
  end;
  RELAXATION trg_ts_test_iu kompiliert
  
  Update vw_test
  Set stamp_copy = stamp
  1 Zeilen written on.
  
  Select the stamp, stamp_copy, dump (stamp_copy)
  of ts_test
  STAMP STAMP_COPY DUMP (STAMP_COPY)
  -----------------------------------------------------------------------------------------------------------------
  30.05.2012 19:08:49, 218000000 30.05.3192 20:09:50, 000000000 Typ = 180 Len = 7: 131,192,5,30,21,10,51
  
  Select *.
  of nls_session_parameters
  VALUE OF THE PARAMETER
  ----------------------------------------------------------------------
  NLS_LANGUAGE GERMAN
  NLS_TERRITORY GERMANY
  NLS_CURRENCY €
  NLS_ISO_CURRENCY GERMANY
  NLS_NUMERIC_CHARACTERS.
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT exact hh24:mi:ss
  NLS_DATE_LANGUAGE GERMAN
  NLS_SORT GERMAN
  NLS_TIME_FORMAT HH24:MI:SSXFF
  NLS_TIMESTAMP_FORMAT JJ. MM YYYY HH24:MI:SSXFF
  NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR
  NLS_TIMESTAMP_TZ_FORMAT JJ. MM YYYY HH24:MI:SSXFF TZR
  NLS_DUAL_CURRENCY €
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS TANK
  NLS_NCHAR_CONV_EXCP FAKE
  
  17 Zeilen offiziell
  
  Rollback
  Rollback abgeschlossen.
  < / pre >
  
  Look at the strange data that stamp_copy was after the update.
  
  When run from SQL over, everything is fine. But when I run this code in our application, the same phenomenon occurs. I've even seen a data dating back to the year 11907 (!), giving an exception by selecting from the table.
  
  Someone at - it an idea on how to work around this bug?
  
  Best regards
  
  Jürgen

  Did you check metalink for bugs?

  There are a few listed in this blog, that may be useful for you.

  http://hoopercharles.WordPress.com/2011/02/17/strange-timestamp-behavior/

• Why can I not see the files I back up by using the backup and restore of Vista

  Can someone help me?  I have a Dell Inspiron 1525 and implemented backup and restore feature Vista so that every Sunday he automatically backs up my computer to my external drive.  I was on the computer when he said it starts up and that upward was completed successfully.  I assummed everything was fine until today when I show my father my drive external and noticed that none of the backup of files were there... or at least I did not see them.  The only files on the disk were the ones I put manually on here from my old computer.  I then ran a manual upward using Vista and again it says backup successfully completed.  I then watched the external hard drive and once again no new files.  The strange thing is the back up and restore program shows all the dates he has saved and also allows me to restore files from the back to the top.  To do this, I deleted a file I didn't really need out of my hard drive and then is gone to restore program and found the file and restored.  Problem is that the program does not say where he makes the file from.  What is going on?  Are backup files of certain types of hidden file I don't see unless I use the backup and restore program under vista?  I am currently running Vista Home Premium on a 32 bit system and the external hard drive I have is a Western Digital My Book Essential Edition.

  Windows backup is stored in a folder with the same name as your computer.  Open a command prompt and type echo %ComputerName% or startup, right-click on computer, properties.  You should see that % ComputerName % folder on your external drive, and in this context, a backup set. Steve Hebert - MVP Microsoft Internet Explorer