string split or group
I want to divide and put the string in table... for example I want to group 4 which is array1 and array2, array3, array4
and then if I write 1111 0010 he enters my array array1 and 0010 will be my value below
so if I write 2222 0011 he enters my array array2 and 0011 will be my value underneath and so forth for array3 and array4
simplify I write 1111 0010 3333 2222 0011 0012 4444 0013 that my table will look like this
table 1 table 2 array3 array4
0010 0011 0012 0013
If other than the 1111,2222,3333 and I want to ignore it and it's the value of 4444
can someone give me some example about it
Tags: NI Software
Similar Questions
-
issue of String.Split("")
Hi you
I have a string that contains a name entry, and I care about them overturned in 2 parts and the record within a table, the first name and last name.
How do with string.split?
My current code is
myNameArray = str_adminInput.split("");
This code only works if the names are: Jack Lee, June Poh.
This code does not work if the names are: Lee Tok Kong, Tan Beng Seng.
How to solve this problem?
-Zainuu
I think you can do this:
var firstname:String = str_adminInput.substring (0, str_adminInput.indexOf(""));
var secondname:String = str_adminInput.substring (str_adminInput.indexOf(""), str_adminInput.length);
myNameArray = new Array (firstname, secondname);
-
ORA-01436: CONNECT loop in the user data when the delimited string splitting by the
I'm trying to split a string into records. The values are three characters more '-' with a limit of 12 values. The values themselves are a combination of two data, the first being two characters, a.
The following example translates: ORA-01436: CONNECT BY a loop in the user data
WITH Data(Code, Datum) AS ( SELECT 'VGCU3VM', '00V-YYG-BVC-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL SELECT 'VGAU3VM', '00V-YYG-BVA-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL SELECT 'VGLN3CM', '00V-YYG-BVL-PIN-DV3-EVC-TVM-' FROM Dual UNION ALL SELECT 'VGLT3PM', '00V-YYG-BVL-PIT-DV3-EVP-TVM-' FROM Dual UNION ALL SELECT 'VGAT3RA', '00V-YYG-BVA-PIT-DV3-EVR-TVA-' FROM Dual ) SELECT Datum, LEVEL, SUBSTR(Datum, ((LEVEL - 1) * 4) + 1, 2), SUBSTR(Datum, ((LEVEL - 1) * 4) + 3, 1) FROM Data CONNECT BY Code = PRIOR Code AND LEVEL <= LENGTH(Datum) / 4;
Remove the 'Code = Code PREREQUISITE"clause, to avoid the error, but too many records are returned, because nothing is to limit the records in their own groups.
The following works:
WITH Data(Code, Datum) AS ( SELECT 'VGCU3VM', '00V-YYG-BVC-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL SELECT 'VGAU3VM', '00V-YYG-BVA-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL SELECT 'VGLN3CM', '00V-YYG-BVL-PIN-DV3-EVC-TVM-' FROM Dual UNION ALL SELECT 'VGLT3PM', '00V-YYG-BVL-PIT-DV3-EVP-TVM-' FROM Dual UNION ALL SELECT 'VGAT3RA', '00V-YYG-BVA-PIT-DV3-EVR-TVA-' FROM Dual ) SELECT Datum, SUBSTR(Datum, ((Some.Num - 1) * 4) + 1, 2) A, SUBSTR(Datum, ((Some.Num - 1) * 4) + 3, 1) B FROM Data, (SELECT LEVEL Num FROM Dual CONNECT BY LEVEL <= 12) Some WHERE SUBSTR(Datum, ((Some.Num - 1) * 4) + 1, 2) IS NOT NULL;
What causes ORA-01436?
Hello
Depending on your version, you can add another condition to your CONNECT BY clause.
It works in Oracle 11.2.0.3.0:
SELECT
Point of reference,
LEVEL,
SUBSTR (Datum, ((LEVEL-1) * 4) + 1, 2),
SUBSTR (Datum, ((LEVEL-1) * 4) + 3, 1)
Of
Data
CONNECT
Code = Code PRIOR
AND LEVEL<= length(datum)="">=>
AND PRIOR SYS_GUID () IS NOT NULL-* ADDED *.
;
Thanks for the display of the data of the sample; This is really useful!
In addition, relational databases are designed to have 1 piece of information in each column of each row, not a list delimited by up to 12 points. It is so basic to the design of database he called the first normal form. You're going to solve a lot of problems even before they occur if you paste to first normal form and change the table structure to resemble the result set of this query. (Maybe that's exactly why you're doing this query.)
-
Hello
If I have the string "test1 test2-ttt test3 '... How to split the string into two strings, so the 1st string contains the 1st Word and the second the words after the first space?
for example, in my case str1 = str2 = ttt-test2 test3 and test1
I tried with
but this isn't the desired result...select substr('test1 test2-ttt test3', 1, instr('test1 test2-ttt test3', ' ', instr(''test1 test2-ttt test3', ' ')+1)-1) from dual;
Thanks in advance!Try
substr ("test1 test2-ttt test3", 1, instr('test1 test2-ttt test3',' ')-1) select word1, substr ('test1 test2-ttt test3', instr ("test1 test2-ttt test3 ',' '") + 1) double word2.Alexander gelin
http://nimishgarg.blogspot.com/ -
Help with string.split() for line breaks and spaces
What I'm trying to do is to take a series of numbers and convert it to a table, while cutting the numbers, aren't. Here's the format:
1.0000000E + 000 + 000 1.3668423e
1.0000000E + 000 + 000 1.3668423e
1.0000000E + 000 + 000 1.3668423e
...
So it is basically: space, space, digits, space, space, numbers, line break
Right now I am using the following code (myString is a string, and dataSet1 is an array):
var reg: RegExp = new RegExp ("\n");
myString = textLoader.data;
myString.split (reg) = dataSet1;I tried ("\n\s") and ("(\n)(\s*)") and many other combinations, but I can't seem to figure out how to make multiple conditions in a regular expression. All I need to do is to remove all the spaces and line breaks and I should be good.
I appreciate any help, thanks.
You can use the Array.map method to convert your strings. Something like this:
function str2Num(element:*,_index:int,_arr:Array):Number
{
Return Number (item);
}var arr:Array;
ARR = myString.replace(/^\s+/,"").replace(/\s+$/,"").split(/\s + /);
ARR = map (str2Num, null);
or combine them all in a single statement
ARR = myString.replace(/^\s+/,"").replace(/\s+$/,"").split(/\s + /) .map (str2Num, null);
-
Help me with strings of small groups to interpolate the symbols in REGEXP_LIKE
If I have this PL/SQL that works very well for me and I had to add another condition, which is a REGEXP_LIKE... and I heard that
PL/SQL has a problem with special symbols and I need to get out them by interpolating, here is the line I added and I do not know how...
or REGEXP_LIKE (ADDR_DELVRY, "[a-zA-Z0-9._%-]+@[a-zA-Z0-9._%-]+\. [a-zA-Z] {2,4} ")"
Thank you!
Hello
Kodiak_Seattle wrote:
If this string:
or REGEXP_LIKE (ADDR_DELVRY, "[a-zA-Z0-9._%-]+@[a-zA-Z0-9._%-]+\. [a-zA-Z] {2,4} ")"
in SQL is fine, but when I put it in a PL/SQL it generates errors and I was told that it is because of special characters that must be broken out...
- Error (13,16): PLS-00103: encountered the symbol "=" when expected as follows: constant exception double long Ref char table time timestamp interval date binary character national nchar symbol "" was replaced by "=" continue.
- Error (25,82): PLS-00103: encountered the symbol ")" when expecting one of the following values: ( * % & = - + ; <> is mod remains not rem <> or! = or ~ = > = <=>=> <> and/or as like2 like4 likec between | Member of multiset submultiset symbol "(" a été substitué pour")" to continue. "
Here is everything:
SQL_STMT_C_1 varchar2 (2000): = ' create table Y775. TABLE_TEST COMPRESS as
Select / * + parallel (AUTO) * / a.cust_skey, a.name_first, a.name_last, a.ADDR_DELVRY, a.ADDR_DELVRY2,.
a.ADDR_CITY_NAME, a.ADDR_STATE_NAME, a.ADDR_POSTAL_CODE, b.MKT_MAIL_PREF_IND
from Table_A a, Table_B b
where a.cust_skey = b.cust_skey
and (a.A_SURV_DT > = 20101028 and b.MAIL_IND ("y", "U"))
and (instr (upper (a.ADDR_DELVRY), 'XX') > 0 OR instr (upper (a.ADDR_DELVRY2), 'XX') > 0 OR instr (upper (a.addr_city_name), 'XX') > 0)'
or REGEXP_LIKE (ADDR_DELVRY, "[a-zA-Z0-9._%-]+@[a-zA-Z0-9._%-]+\. [a-zA-Z] {2,4} "))';
Is this really all that? Are you sure there are no (for example) of a DECLARE statement before that?
The last line you posted above is supposed to be part of the literal string assigned to sal_stmt_c_1? If so, not the literal en at the end of the line before cela.
Remember, if you want to have a single quote inside a string literal, then you must use single quotes in a row 2. You did correctly before the last line, for example, when you said:
... and (a.A_SURV_DT > = 20101028 and b.MAIL_IND IN (""Y"", """U", "")...)
Do the same sort of thing in the last line (or use Q-rating to the string literal). See the manual of the SQL language
http://docs.Oracle.com/CD/E11882_01/server.112/e26088/sql_elements003.htm#sthref347
-
Quantities of string with County group
Hi all
its been a while that I'm stuck with this query, below is the sample data, I work with
table name: demo
Column1 zaqwsxqwa zaqwsxfvb zaqwsxdec xswedcmja xswedchnb assuming that the above table, I need string manipulation in such a way that the output is
Output 1 zaqwsx1 zaqwsx2 zaqwsx3 xswedc1 xswedc2 is it possible to do it only with SQL?
Hello
829596 wrote:
Hi all
its been a while that I'm stuck with this query, below is the sample data, I work with
table name: demo
Column1 zaqwsxqwa zaqwsxfvb zaqwsxdec xswedcmja xswedchnb assuming that the above table, I need string manipulation in such a way that the output is
Output 1 zaqwsx1 zaqwsx2 zaqwsx3 xswedc1 xswedc2 is it possible to do it only with SQL?
Sure. In fact, there are different ways that give the same results on your examples of data, but for reasons of differetn, and that's why they all will give different results on other sets of data.
One of the many different ways is
SELECT SUBSTR (column1, 1, 6).
ROW_NUMBER () OVER (PARTITION OF SUBSTR (column1, 1, 6)
ORDER BY NULL
)
AS output1
FROM table_x
;
I hope that answers your question.
If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements), and the results you want from this data.
Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.
If you change the query at all, post your modified version.
Always say what version of Oracle you are using (for example, 11.2.0.2.0).See the FAQ forum: https://forums.oracle.com/message/9362002
-
Hi all.
I have a form with a TextBox for the display name and I want the fist letter capitalized in the first and last name.
I have a function for it and everything works fine, the problem comes when there is a hyphen "-" in the name. I work part of split, but I can't make it work on the side of the join.
function ucFirstAllWords( str ) { var pieces = str.split(" "); //use this for space and "-" split (/[ \/-]/); for ( var i = 0; i < pieces.length; i++ ) { var j = pieces[i].charAt(0).toUpperCase(); pieces[i] = j + pieces[i].substr(1); } return pieces.join(" "); }
If I use this code and slpit on the hyphen and space all get the join with the space, I tyed to do a function in function to capture the first hyphen, but that did not work probably hurting
Does anyone have an idea how to fix?
I am on LK 8.0
Thank you.
Fredrik Nordstrand, Sweden
Hi Scott.
I want to 'john doe' to be "John Doe" and 'Rose of ann-lee' to be 'Ann - Lee Rose Bush.
Make any sense?
Woks fine scrip but not with a name that contains a hyphen.
If I use the split to include the hyphen "ann-lee" would become "Ann Lee" and that's not true.
-
String.Split on temporal Bay of the URL button
Hi people.
It is therefore part of the current video player that I am. Here is the configuration of the problem:
customer must have taken URL applied to an invisible button when commercials (usually 30 seconds each). There are some javascript controls that populate the click URL, which are separated by ",". The tracking URL could be between one and 3 URLS per 30 second commercial. If it is 3, then the URL changes every 10 seconds.
Right now I have the button work - any. Javascript fills the invisible button, but when you click on the button during the commercial you get the pop-up windows three rather than one by trading block (i.e. y three popups different with three different URL - but at the same time, just by click).
Code is below / attached.
However, when I add in this code, it just seems looped and stops the action of the button. For most the 'if' statement is the problem.
So no idea on how I can get the URL to fill one at a time by time frame?If you want to hire me to solve your problem, send me an email via my website.
-
Dear Sir
Is there a simple function like string.split
I want to just split this string 384; 603; 107; 38
Rgds
Nadir
and this thread can also help you:
-
String is split for model [|]
Hello I want to split the string with "[|]" so what is the model for string split for this
Concerning
Mayur MitkariMayur Mitkari wrote:
his does not workYes.
-
BUG: Split then join reverse byte order - sometimes
I created a simple to serialize an array of bytes I32 and fell VI on this interesting bug. This code runs in 32-bit SP1 of LabVIEW in 2014, fully patched. Save the parts two attached and run TestI32ToByteArray.vi. Note that the 6 and 7 at the end of the table are reversed. If you explore the data around, everything looks good except the string split on the last low word is reversed. Any ideas?
More details on the installation program:
LabVIEW 2014 SP1 32-bit
AMD FX - 6300 3.5 GHz processor hexagonal
Windows 7 64 - bit, fully patched
8 GB RAM
Check your wiring, 6 is connected to a lower bound of the join, and 7 is wired to the top.
-
Features of LabView string StartsWith as in c#?
Hi all
in c# (.NET) there is a good class: String
There, it is possible for example to get information, if the string startswith one substring special.
Is that what this possibility in LabView? Y at - it these LabView vi, which offers this feature? (Excerpts)?
So I ask you:
I want to create a switch/case (structure-case) block in labview for this code:
If (String.StartsWith ("XYZ")) step in case1
another step if (string.startswith ("DEF")) in CAS2
...
BTW:
It would be great if someone could create polymorphic VI with these functions:
(from c# string class)
public object Clone();
public static int Compare (string strA, string strB);
public static int Compare (string strA, string strB, Boolean ignoreCase);
public static int Compare (string strA, strB string, StringComparison comparisonType.greater);
public static int Compare (string strA, string strB, Boolean ignoreCase, CultureInfo culture);
public static int Compare (string strA, string strB, CultureInfo culture, CompareOptions options);
public static int Compare (string strA, int indexed, string strB, indexB int, int length);
public static int Compare (string strA, int indexed, string strB, indexB int, int length, Boolean ignoreCase);
public static int Compare (string strA, int indexed, string strB, indexB int, int length, StringComparison comparisonType.greater);
public static int Compare (string strA, int indexed, string strB, indexB int, int length, Boolean ignoreCase, CultureInfo culture);
public static int Compare (string strA, int indexed, string strB, indexB int, int length, CultureInfo culture, CompareOptions options);
public static int CompareOrdinal (string strA, string strB);
public static int CompareOrdinal (string strA, int indexed, string strB, indexB int, int length);
public int CompareTo (object value);
public int CompareTo (string strB);
Public Shared Function Concat (IEnumerable values);
public static string Concat(IEnumerable values);
Public Shared Function Concat (object arg0);
public static string Concat (params object [] args);
Public Shared Function Concat (params string [] values);
Public Shared Function Concat (object arg0, object arg1);
Public Shared Function Concat (string str0, string str1);
public static string Concat (object arg0, object arg1, object arg2);
Public Shared Function Concat (string str0, string str1, string str2);
public static string Concat (object arg0, object arg1, arg2, object arg3);
public static string Concat (string str0, string str1, str2, string, string str3);
public boolean Contains (string value);
Public Shared Function Copy (string str);
public final void CopyTo (int sourceIndex, destination of char [], int destinationIndex, int count);
public boolean EndsWith (string value);
public boolean EndsWith (value string, StringComparison comparisonType.greater);
public boolean EndsWith (string value, Boolean ignoreCase, CultureInfo culture);
public boolean Equals (object obj);
public boolean Equals (string value);
public static Boolean Equals (String, b string);
public boolean Equals (string, StringComparison comparisonType.greater value);
public static Boolean Equals (string a, b string, StringComparison comparisonType.greater);
Public Shared Function Format (string format, object arg0);
Public Shared Function Format (string format, params object [] args);
Public Shared Function Format (IFormatProvider provider, format of the string, params object [] args);
Public Shared Function Format (string format, object arg0, object arg1);
Public Shared Function Format (string format, object arg0, object arg1, object arg2);
public CharEnumerator GetEnumerator;
public override int GetHashCode();
public TypeCode GetTypeCode();
public int IndexOf (char value);
public int IndexOf (string value);
public int IndexOf (char value, int startIndex);
public int IndexOf (string value, int startIndex);
public int IndexOf (string value, StringComparison comparisonType.greater);
public int IndexOf (value char, int startIndex, int count);
public int IndexOf (string value, int startIndex, int count);
public int IndexOf (string value, int startIndex, StringComparison comparisonType.greater);
public int IndexOf (string value, int startIndex, int count, StringComparison comparisonType.greater);
public int IndexOfAny (char [] anyOf);
public int IndexOfAny (char [], int startIndex anyOf);
public int IndexOfAny (anyOf char [], int startIndex, int count);
public string Insert (int startIndex, string value);
Public Shared Function Intern (string str);
public static IsInterned (string str);
public boolean IsNormalized();
public bool IsNormalized (NormalizationForm normalizationForm);
public static Boolean IsNullOrEmpty (string value);
public static Boolean IsNullOrWhiteSpace (string value);
Public Shared Function Join (separator string, IEnumerablevalues);
Public Shared Function Join(separator string, IEnumerable values);
Public Shared Function Join (separator string, params object [] values);
Public Shared Function Join (separator string, params string [] value);
Public Shared Function Join (separator string, string [], int startIndex, int count);
public int LastIndexOf (char value);
public int LastIndexOf (string value);
public int LastIndexOf (char, int startIndex value);
public int LastIndexOf (string value, int startIndex);
public int LastIndexOf (string value, StringComparison comparisonType.greater);
public int LastIndexOf (value char, int startIndex, int count);
public int LastIndexOf (string value, int startIndex, int count);
public int LastIndexOf (string value, int startIndex, StringComparison comparisonType.greater);
public int LastIndexOf (string value, int startIndex, int count, StringComparison comparisonType.greater);
public int LastIndexOfAny (char [] anyOf);
public int LastIndexOfAny (char [], int startIndex anyOf);
public int LastIndexOfAny (anyOf char [], int startIndex, int count);
public string Normalize();
public string Normalize (NormalizationForm normalizationForm);
public string PadLeft (int totalWidth);
public string PadLeft (totalWidth int, char paddingChar);
public string PadRight (int totalWidth);
public string PadRight (totalWidth int, char paddingChar);
public string Remove (int startIndex);
public string Remove (int startIndex, int count);
public string Replace (char oldChar, char newChar);
public string Replace (string oldValue, string newValue);
public string [] Split (params char [] separator);
public string [] Split (separator char [], int count);
public string [] Split (char [], StringSplitOptions options separator);
public string [] Split (String [], StringSplitOptions options separator);
public string [] Split (char [], int count, StringSplitOptions options separator);
public string [] Split (String [], int count, StringSplitOptions options separator);
public boolean StartsWith (string value);
public boolean StartsWith (value string, StringComparison comparisonType.greater);
public boolean StartsWith (string value, Boolean ignoreCase, CultureInfo culture);
public string Substring (int startIndex);
public string Substring (int startIndex, int length);
public char [] ToCharArray();
public char [] ToCharArray (int startIndex, int length);
public string ToLower();
public string ToLower (CultureInfo culture);
public string ToUpperInvariant();
Public Overrides Function ToString();
public string ToString (IFormatProvider provider);
public string ToUpper();
public string ToUpper (CultureInfo culture);
public string ToUpperInvariant();
public string Trim();
public string Trim (params char [] trimChars);
public string TrimEnd (params char [] trimChars);
public string TrimStart (params char [] trimChars);So I ask you:
I want to create a switch/case (structure-case) block in labview for this code:
This can be done already with the structure of the case, you can make simple analysis in the case selector, which takes a string as input.
Type in the case of the first case "XYZ".... "XYZ".
Enter the next case "DEF".... "DEF ~".
Next is the empty string, the default value.
How does this work:
The "XYZ...". "XYZ ~ ' matches all strings that begin with XYZ and any ascii value after the ~ is the highest value printable 7-bit ascii for that catches all the other characters.
Option 2 is parse (there is expression reg very good vi in the channel palette) the string and create if a corresponding to the value of the integer can habdle unique integers in the structure of the case.
There are so many ways to do it without a wrapper for the string .net class, I have provided some quick methods
-
Specific string matching (Hex 2E2E)
I have a file that I have to deal with, a beautiful simple function to create.
Read file, find the part of the file with the string of some data in it, create the output of data in expanded format table and save the spreadsheet file (for example csv will do)
This is the problem, the data is in the format:
PS1 #PS0 #, #PS3 #c3... 31, c34 #... 126
(I can remove the # and no probs.) The bit that kills me, is that I need to extend the range of c3 to c31. We'll never find a match pattern '.. 'because'. ' is a special character in match pattern and matching of regular expressions - thank you NOR.)
I can kind to locate using the string split function, but it does not I want very efficient, if someone at - there ideas for a better way around this problem?
See you soon
James
Hi James,
Try this:
-
Just a little prayer.
As this group traffic continues to increase, I was wondering if it would be possible to split the group into two groups.one for android tablets and other for windows tablets 8
Hi herresko,
Thanks for the suggestion!
I'll pass it along to the administrator of the community.
Maybe you are looking for
-
Motu 8 pre distorted his left channel
Hello I bought a MacBook Pro 2014 2, 2 GHz i7, 16 G memory vivid and connected my Motu 8 pre via FireWire-> love at first sight. When you use it with Logic Pro 10.2.4 is immediately created questions about my left channel. The noise on the right chan
-
It shows the logo, but is not on even a while it does, but for only 2 seconds then shows new logo
-
How can I clear the history of firefox url 10.0
I just want to keep clear of the previous url url.
-
I get a window that opens saying launcher.exe kjs.applife.update.update failed to initialize properly (0xc000007b). Then a message that it has stopped working and that "Windows will close the program and notify me if a solution is available." This is
-
Why is it that whenever I reboot there is another update to install?
* Original title: Windows 7 updates Why is it that whenever I reboot there is another update to install. I look at the date, and he said that the publication date is 12/15/15. It is now almost at the end of January. How can I get all the updates that