String is split for model [|]

Similar Questions

• Can you please provide me with the part number for the screen for model #: NX. SHKAA.001?

  Can you please provide me with the part number for the screen for model #: NX. SHKAA.001 (AO1 - 131 M-C1T4)?  The first ten digits of the serial number are NXSHKAA005.

  Matt or gloss is what it looks like. Some like not brilliant but because most are a reflection. I would say that they would work as long as the resolution of the size and the backlight are the same.

• I'm looking for models of posters for photoshop

  I'm looking for models of posters for photoshop.  Any idea were I can end some?

  Hi josem45690740,

  Please check the link that might be useful for you below:

  Model poster photoshop free vector for free download free (30) vector in, eps, cdr, svg format.

  Concerning

  Sraika

• I installed the plugin for sony camera raw for model rx111 and photoshop cs4 file is unrecongnizable

  How can I get adobe cs4 to read installed the plugin for sony camera raw for model rx111

  Error reading file from photoshop cs4 is unrecongnizable

  Thanks for the reply, I'm upgrading to cs currents 2015 that the camera is again for my version of cs 4, so I'm leaving dinosaur days and of the 21st century

• Adding new SCSI controller: "error string: invalid operation for the '0' device.»

  Hello

  I have a problem when I try to add a SCSI controller to a virtual machine.

  I have this error:

  Error string: invalid operation for the device '0'.

  Lack of details: InvalidDeviceOperation

  Here is my code:

  my $info = Description-> new (label = > summary of "" SCSI controller 2 ' = > 'LSI Logic parallel' ");

  my $controller = VirtualLsiLogicController-> new)

  deviceInfo = > $info,

  scsiCtlrUnitNumber = > '7'.

  sharedBus = > VirtualSCSISharing-> new ('noSharing'),

  busNumber = >-1,

  key = >-1,

  backup = > $backing_info,

  controllerKey = > 100,

  );

  My $devspec = VirtualDeviceConfigSpec-> new (operation = > VirtualDeviceConfigSpecOperation-> new ('add'),)

  device = > $controller,

  fileOperation = > VirtualDeviceConfigSpecFileOperation-> new ('create').

  );

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange = > [$devspec]);

  {eval

  $vm_view-> ReconfigVM (spec = > $vmspec);

  Util::trace (0, "Controller has been created. \n") ;

  };

  I don't know how to handle, or even how to solve problems.

  Any ideas would be greatly appreciated.

  Kind regards

  Jeremy

  I finally found a solution.

  It seems that it fails if you give a marked as mandatory parameter (scsiCtlrUnitNumber, hotAddRemove)... Theses parameters seem to be set automatically, a dump of the device which will show.

  Here's the code used:

  My = $controller_spec

  VirtualDeviceConfigSpec-> new (device-online VirtualLsiLogicController-> new (key-online 0

  device-online [0],

  busNumber => $scsi_controller.

  sharedBus => VirtualSCSISharing-> new ('noSharing')),

  operation => VirtualDeviceConfigSpecOperation-> new ('Add'));

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange-online [$controller_spec]);

  {eval

  $vm_view-> ReconfigVM (spec-online $vmspec);

  };

• Synchronize the dictionary of data with model only works for models imported?

  When I imported data dictionary model (file-> import-> data dictionary) then in relational model the two buttons "Synchronize Data with Model Dictionary" and "Synchronize model with Data Dictionary" works very well.
  
  But when I model created from scratch and I'm clicking on the buttons "Synchronize data dictionary with the model" or "Synchronize model with Data Dictionary" nothing happens.
  
  It works only for models imported?
  
  (Data model EA 3.3)

  Hello

  Yes, Synchronize only works for objects that were imported to the original (like Synchronize uses the information entered during the import to determine which database connection and the database object to compare to).

  If your model is not imported, you can achieve the same effect as follows:
  -Open the template in Data Modeler and also open the relevant physical model.
  -Do an Import of data dictionary, select the objects you want to compare with that.

  After the import phase, this will display the dialog box to compare, showing the differences between the objects imported from the database and your model.

  Note that if you intend to generate the DDL to update your database of the difference (as in "synchronize with Model Data Dictionary"), you must select the "Swap Target Model" option in step 2 (select database schema) data dictionary import wizard.

  David

• Literal string too long for the CLOB

  Hello
  My version of the database is:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE 11.2.0.1.0 Production
  AMT for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  When I run this piece of code, I get an error.
  DECLARE
  insCtx DBMS_XMLStore.ctxType;
  lines NUMBER;
  xmlDoc CLOB: = 'xml string is about 4600 long lines in TOAD...';
  BEGIN
  insCtx: = DBMS_XMLStore.newContext ("xmlTempTbl"); -get the context
  lines: = DBMS_XMLStore.insertXML (insCtx, xmlDoc); -Insert the doc
  DBMS_XMLStore.closeContext (insCtx); -close the handle
  END;
  
  ERROR:
  ORA-06550: line 4, column 19:
  PLS-00172: string literal too long
  
  From my understanding a CLOB leave maximum string size of 2 GB. And on top, my xml string is not greater than 2 GB (I cannot display the xml data string, refers to the business). So why I get the error too long string literal.
  For the above, I fault the XML into several parts and run the PLSQL, then it gives no error.
  Please advice.
  
  Published by: 934451 on November 8, 2012 07:06
  
  Published by: 934451 on November 8, 2012 07:07

  From my understanding a CLOB leave maximum string size of 2 GB.

  Not exactly:
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25519/datatypes.htm#CHDDCGEE

  but this isn't the real problem.

  The error is about the "string literal" size, there is a limitation too:
  http://docs.Oracle.com/CD/E11882_01/server.112/e17766/pcmus.htm#sthref18132

  PLS-00172: string literal too long
      Cause: The string literal was longer than 32767 bytes.
      Action: Use a string literal of at most 32767 bytes.
  

  For the above, I fault the XML into several parts and run the PLSQL, then it gives no error.

  Is this a real case of production or you just test?
  In practice, we should first save the file in a variable/column CLOB (or XMLType) and then reference the content from there.

• Array of string to search for the exact match words

  I need to create a search feature.

  There is a textfield where the user will enter one or more words.

  Then I need to check if are any reference in the array of names.

  namesArray ["ocean in the sky", "cean on sky", "cean is white"];
  keywordsArray ["cean", "sky"];
  matchCounter = 0;
  

  If I entered the word "cean" I don't want in my results 'ocean in heaven', 'cean's heaven

  I have the following code:

  for (var j:int = 0; j < namesArray.length; ++j)
  {
       var tempStr:String = namesArray[j];
  
       for (var k:int = 0; k < keywordsArray.length; ++k)
       {                    
            if (tempStr.indexOf(arrayKeywords[k]) != -1)
            {
                matchCounter++;
            }
       }
  
       if(lengthKeywords == matchCounter)
                                {
            trace("yeahhh... there's a match!!");
       }
  
       matchCounter = 0;
  }
  

  Is there a better way? How can I do this?

  There are little things, but the main problem is that 'new RegExp()' needs double escapes ("\")

  ...
              var namesArray:Array = ["ocean in the sky", "cean on sky", "cean is white"];
              var keywordsArray:Array = ["cean", "sky"];
  
              for (var j:int = 0; j < namesArray.length; j++){
                  var matchCounter:uint = 0;
                  var tempStr:String = namesArray[j];
  
                  for (var k:int = 0; k < keywordsArray.length; k++){
                      var regExp:RegExp = new RegExp("(\\s+|^)" + keywordsArray[k] + "(\\s+|$)");  
  
                      if (tempStr.search(regExp) > -1){
                          matchCounter++;
                      }
                  }
  
                  if(keywordsArray.length == matchCounter){
                      trace("\"" + namesArray[j] + "\" matched all the keywords");
                  }
              }
  ...
  

  Traces:

  'cean on Sky' set match all keywords

• installation of Split for EBS R12

  Hi all
  
  
  I want to have a split for EBS configuration. Say that I have 2 servers and I'll use 1 for the DB and the other for applications.
  Although I have not yet tried, because we have only 1 test server to exercise the profession.
  My question is... is my understanding correct? To install a split of EBS configuration.
  
  1. I need to run RAPIDWIZ on the machine 1 (server) and install the DB layer. and
  2. run RAPIDWIZ on the 2nd machine and install the layer Apps.
  
  
  
  Thank you
  
  Published by: yxes2009 on January 20, 2009 05:07

  Quick installation can a stack of technology new installation for the database layer (Oracle10g R2) or Applications (Oracle Application Server 10g) node in a system existing. To access the flow of screen quick installation for installation of technology stack, use the parameter - techstack when you start a fast installation. You will be asked for when you want to perform the following operations:

  -Upgrade the database
  -Install the new technology for the database layer or the applications node stack
  -Migrate from one platform to another

  You can still use "rapidwiz - techstack" to create the ORACLE_HOME RDBMS on the target machine and then migrate the database.

  More details can be found on ' rapidwiz - techstack ' in [Oracle Applications Installation Guide: quick help install | http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120oaig.pdf] Manual.

• Oracle regular expressions - splits the string into words for

  Hello

  Nice day!

  My requirement is to split the string into words.

  So I need to identify the new line character and the semicolon (;), comma and space like terminator for string entry.

  Please note that I am currently embedded blank and the comma as separator, as shown below.

  Select regexp_substr('test)
  TO
  string in words, "([^, [: blanc:]] +) (', 1, 1) double;"

  How to integrate the semicolons and line break characters in regular expression Oracle?

  Please notify.

  Thanks and greetings

  Sree

  This has nothing to do with REGEXP. Is SQL * more parser does not not a semicolon at the end of the line:

  SQL > select ' testto, mm\;
  ERROR:
  ORA-01756: city not properly finished chain

  SQL >

  Just break the chain:

  SQL > select regexp_substr ('testto, mm\;' |) '
  2 string into words
  3 \w+',1,level ',') of double
  4. connect by level<= regexp_count('testto,mm\;'="" ||="">
  5 string in words
  6      ','\w+')
  7.

  REGEXP_SUBSTR ('TESTTO, MM\;' |') STRINGIN
  --------------------------------------
  Testto
  mm
  string
  in
  Words

  SQL >

  Or modify SQL * more the character of endpoints:

  SQL > set sqlterm.
  SQL > select regexp_substr ('testto, mm\;)
  2 string into words
  3 \w+',1,level ',') of double
  4. connect by level<=>
  5 string in words
  6      ','\w+')
  7.

  REGEXP_SUBSTR ('TESTTO, MM\;) STRINGINTOWO
  --------------------------------------
  Testto
  mm
  string
  in
  Words

  SQL >

  SY.

• Help with string.split() for line breaks and spaces

  What I'm trying to do is to take a series of numbers and convert it to a table, while cutting the numbers, aren't. Here's the format:

  1.0000000E + 000 + 000 1.3668423e

  1.0000000E + 000 + 000 1.3668423e

  1.0000000E + 000 + 000 1.3668423e

  ...

  So it is basically: space, space, digits, space, space, numbers, line break

  Right now I am using the following code (myString is a string, and dataSet1 is an array):

  var reg: RegExp = new RegExp ("\n");

  myString = textLoader.data;
  myString.split (reg) = dataSet1;

  I tried ("\n\s") and ("(\n)(\s*)") and many other combinations, but I can't seem to figure out how to make multiple conditions in a regular expression. All I need to do is to remove all the spaces and line breaks and I should be good.

  I appreciate any help, thanks.

  You can use the Array.map method to convert your strings. Something like this:

  function str2Num(element:*,_index:int,_arr:Array):Number
  {
  Return Number (item);
  }

  var arr:Array;

  ARR = myString.replace(/^\s+/,"").replace(/\s+$/,"").split(/\s + /);

  ARR = map (str2Num, null);

  or combine them all in a single statement

  ARR = myString.replace(/^\s+/,"").replace(/\s+$/,"").split(/\s + /) .map (str2Num, null);

• HARD 500 GB in 13-M100EIA SPLIT drive model

  Hello

  I hope that this is the appropriate place to ask this question...

  I'm about to buy a Split X 2 but before I do, I want to know if:

  1. a 500 GB HDD can be installed inside the base of DIVISION 13 -M100EIA X 2.

  2. If I can upgrade the RAM to 4 GB to 8 GB

  Thank you.

  Link to the system is particularly

  http://support.HP.com/us-en/document/c03942882

  Your logic is impeccable. I'd do it myself if I were you, too. There is not a manual for specific models, just for a series of models and it is the right one for the model you are asking about.

  If it's 'the Answer' please click on 'accept as Solution' to help others find it.

• How to replay a scene without making reference to its string name? (For an overview)

  Hello guys,.

  I'm creating a presentation, where each blade is a scene. I am new to Flash, and I use Flash CS6.

  I managed so far in the keyboard controls to move to the next and previous scene without reference to their names of coding, but the problem is this: every scene is supposed to have an animation which, by default, is answer you until I asked to move to the next slide. How can I give a command as part of the end of the stage that allows to replay the current scene and not the whole flash show? I expect something like:

  gotoAndPlay (1, currentScene ());

  I wouldn't make reference on behalf of the scene because I want to use the same code on all the scenes without the need to modify for each scene.

  However, if you have any better suggestions to make a presentation on Flash, I'd like to hear them. I do what I do because I did not use the model of advanced Flash presentation. I couldn't find a way to add/remove the slides. It has been very ambiguous to me.

  Thank you for all the efforts made.

  I do not use scenes generally probably not them because I found hide them content, I tried to find and due to them having a checkered past.   Usually, I would recommend people to avoid.

  For a slideshow based on the timeline, I would create each slide as a movieclip, and each slide would occupy a single frame of the main timeline.  That way, you don't need to use anything to make the loop of the slide permanently.

  As far what do you expect, if it works, it would work in the form of...

  gotoAndPlay (1, currentScene.name);

  currentScene is an object of the scene, not a function/method, so it does not come with the () after him.  Its name property is a string, the function gotoAndPlay required for the argument of the scene

• Pages cannot be split for two documents?

  I have a MacBook Pro (2015) with macos beta Sierra (although that has happened with the beta no El Capitan.

  I can't ever two pages of documents to work in split view. Never. It's infuriating as a Publisher. Can anyone help? I want to see two documents side by side.

  I hit the green button full page and drag it sideways, when I click on another of open pages it says "split view is not available"

  What.the.Heck.

  This isn't a beta support site, and the terms of use for these communities to support Apple open prevents us from discussions on beta products. Incidentally, you try to use a published version of Pages on a beta version of Mac OS X, and there is no assurance that split currently working properly on this beta product, or that the version of the Pages is fully compatible with it either.

  You can open the same document twice in the Pages, and position-by-side, the documents are not open to the exact location in the file system. In El Capitan, I have no problem placing a first-page document in split and then view by clicking on the second to fill the other half of the screen.

  

• 3.70 BIOS update for model ptm50e Tecra M5 says this computer not supported

  After you download an update of the BIOS for my Tecra M5 PTM50E model when I try to install it, says this computer not supported and yet it was obtained from the download page of Toshiba for my model? Also said the Management Console download also machine not taken in charge when I try to install that?

  Can anyone help?

  Hello

  I agree with Akuma
  The common Modules must be installed before you attempt the update of the BIOS.
  The common Modules is an essential component of Windows systems.
  It is required to TOSHIBA's other original programs to work properly, as the update of the BIOS!

  Welcome them