String type: lower Arc?

Similar Questions

• Send String [] [] type of pl/sql function in App.module procedure

  Hello
  I use jdveloper 11.1.1.3.0
  
  I have a pl/sql procedure. entry type argument is array (TAR) 2 Dimensions:
  
  types:
  create or replace TYPE ARRAYWEB in the varray (160) of VARCHAR2 (200);
  create or replace TYPE TAR as the ARRAYWEB table;
  
  Procedure:
  PROCEDURE of translations (info in TAR)
  
  I want to send the String [] [] type to this procedure from a function in the Application module:
  
  1: string [] [] str;
  
  2: CallableStatement plsqlBlock = null;
  
  3: string declaration = "BEGIN testi(:1); END; « ;
  
  4: plsqlBlock is getDBTransaction () .createCallableStatement (statement, 0);.
  
  5: plsqlBlock.setArray (1, str); Get the error
  
  6: plsqlBlock.executeUpdate ();
  
  but in line 5 I do not know what type should I use and this type (Array) does not work
  
  Habib

  Maybe this can help: http://www.devx.com/tips/Tip/22034

  Dario

• Convertion of String type to the class

  How to convert String Type for the class...
  I want to dynamically create an instance of a class.
  
  for example.
  If I have a sring 'className1 '.
  How to create a new instance of-> new className1()
  
  THX in advance
  Angel
  

  Angel,
  I asked this a few weeks ago and got this. This is in response to a specific question about a number to create a power class, but the idea is there. Its in the "getDefinitionByName()".

• Convert string type data

  I use CF10 Builder.

  I need to convert a 6 character string and compare it to a string of 20 characters.

  Entry = 201516 must be converted into 201508 and 201601. I try to handle the conversion in my query and does not all the records that I don't want to count for my report. IF it is a better way, I'm open to suggestions. Here is the code in my query that gives me a "Conversion failed when you convert the value varchar 'E' type of int data.

  WHERE	Name.soc_sec = transact.soc_sec
  	AND name.soc_sec = prospect.soc_sec
  	AND name.soc_sec = approg.soc_sec
  	AND name.soc_sec = nmcrs.soc_sec
  	AND name.soc_sec = transact.soc_sec
  	AND transact.accept <>'v '.
  	AND transact.tcodes = 'AW '.
  	AND name.last_name not like '% test % '.
  	AND prospect.term_int NOT BETWEEN LEFT (rpt_schy.sch_yr, 4) + '08' AND LEFT (rpt_schy.sch_yr, 2) + RIGHT(rpt_schy.sch_yr,2) + '01'
  	AND transact.sch_yr = rpt_schy.sch_yr

  Any help would be greatly appreciated.

  By the process of elimination, if you delete the whole where clause of your query, do you still get the error?

  See you soon

  Eddie

• I want to convert the double data type to string type

  I want to convert the double data type to string, have idea about that

  Hello

  Use f

  FN: String (ARG) returns the string value of the argument. The argument can be a number, boolean, or node-set element

  Example: string (314)
  Result: "314".

  http://w3schools.com/XPath/xpath_functions.asp#string

  See you soon,.
  Vlad

• How can I convert String type to a Type of BinaryEntry?

  We must differentiate between the keys that come to the custom editor Erase method. So, we have added ' | ' at the end of the key as below
  
  key = "a"; Actual key which is cached
  
  If (//some condition)
  {
  newKey = "a" | newKey to differntiate
  getCache () .remove (newKey);
  }
  on the other
  getCache () .remove (key);
  
  Now, the call comes to our custom editor Erase method. Here, we must perform a different operation of the key which has ' | ' in there. So, we have added below code in the custom Erase method.
  
  public void clear (BinaryEntry binEntry)
  {
  Key of type string = (String) binEntry.getKey ();
  If (Key.Contains("|"))
  {
  You will need to do a DB here. Then,
  now, the key is "a |" We need to eliminate the "|" symbol and call the Delete method to delete the current key ('a') of the cache. So we added code below
  
  Replace string newKey = (nom_domaine_dns) ("|", "");
  
  Here, the problem is, key is of type String. But Erase method can take only BinaryEntry type. So, we tried this
  
  binEntry = (BinaryEntry) (binEntry.getContext () .getKeyToInternalConverter () .convert (key));
  
  Super.Erase (binEntry); but it dint work. The entry is not deleted from the Cache.
  
  How to convert key to type the string to BinaryEntry?
  
  }
  on the other
  {
  Super.Erase (binEntry);
  }
  }
  
  
  Can anyone suggest?

  Hello

  Yes, JK is right! I forgot that the remove() will remove the entry from the BackingMap. Another alternative would be to use the EP below:

  public class EP2 extends AbstractProcessor implements Serializable{
       private boolean isSynthetic;
  
       public EP2(boolean bln){
            this.isSynthetic=bln;
       }
       @Override
       public Object process(Entry entry) {
            BinaryEntry binEntry = (BinaryEntry) entry;
            if (isSynthetic){
                 //Synthetic Remove                    
  
                 // This is a bug and should evict entry and not call erase
                 //binEntry.remove(isSynthetic);   
  
                 //Alternative solution is to expire with a minimum delay of 1 ms
                 //This will call the store method so make a check of the original and new value and do nothing if they are same to avoid DB update
                          binEntry.expire(1);
  
            }else{
                 //Will hit the cache store
                 entry.remove(isSynthetic);
            }
            return null;
       }
  }
  

  Client side, make a call to delete as below:

  cache.invoke(key, new EP2(true)); // coherence eviction only
  
  cache.invoke(key, new EP2(false)); // for invoking erase()
  

  I hope this helps!

  See you soon,.
  NJ

• Scheduler external program string type does not manage the credential name

  Hello
  
  I have the following Setup: a basic string containing the type of program 'external '.
  
  11 g, for the launch of work on the 'external' program, we now use the new feature 'name of credentials' (no installation is necessary for the o/s file level as in 10 g).
  He was actually very good.
  
  But when I call it a string containing the external program, I got an error when setting credential_name parameters: ORA-27351: conflicting values of the attributes of CREDENTIAL_NAME and JOB_TYPE task.
  
  So I call the string without the name credentials and the external program is managed, but using 10 g 'old style' method based on the configuration of file db (external program is therefore launched whith user defined in externaljob.ora). You also lose the benefit of the credential to submit external stains on different users.
  
  It seems that the management of the credential_name is not handled in the CHAIN. It's a bug, dev missing or there is an option for this?
  
  Thanks for your help.

  Hello

  You probably want to do is step identification information.

  You can do it by using alter_chain on the particular stage with the attribute value credential_name.

  http://download.Oracle.com/docs/CD/B28359_01/AppDev.111/b28419/d_sched.htm#CHDIAICJ

  Hope this helps,
  Ravi.

• Type lower screw IdeaPad 13 Yoga?

  With improved success my RAM tonight at 8 GB, but when I went to install the SSD, it turns out that none of my huge assortment of torx head screwdriver would work - one that I had was small enough was not the right torx type. Return the whole keyboard and RAM works, at least!

  So the question for you all is: what kind of screwdriver do I need to remove the screws from the bottom?

  Thank you!

  I can confirm that torx T5 works like a charm. Never thought like a medium rare. My the torx drivers go to T4, T5 is not the least.

• can not type lower case letters to change the password, only uppercase letters come

  When I change a password and that you have to copy the letters and numbers, I can only type the capital letters, why don't appear lowercase?

  Hi Claudia,.

  I seriously doubt the problem has nothing to do with your keyboard itself (unless all the problems of cap occur in other places as well and on other websites and in internet like Notepad or Word or other programs), but is a matter of how things work and is designed by the designers of web sites on the sites you use.  What you are dealing with is called a Captcha in http://en.wikipedia.org/wiki/CAPTCHA.  While this "capital" may occur on that specific page or site, I sincerely doubt it occurs on all sites that use such a feature - you are not using or never seen a site where it works differently.  Here's a number of things that may help to explain why you're facing what happens:

  1. the process is based on captures the difficult to read characters in a text box to verify that a person is on-line here and improve the safety of bots.  Different programs use different features and things to code differently.

  2. some Captchas are case-sensitive and others not (it depends on the product purchased or how it is programmed on the web site, or both).  Usually if it is case-sensitive I saw him say that this is the case in small print under the image.

  3. in programming, web page designers can usually decide whether to make case-sensitive entry (or just the sight of it appear uppercase, even if correctly entered in uppercase and lowercase letters), but often cannot control if or not the presented images show images that is case-sensitive.  If they want it is case-sensitive, then the text box must accept case-insensitive letters (even if they do not appear like this) or entry will be denied.

  4 if it is case sensitive, but the images are not, then a way around this problem from a design perspective is for box only accept letters in some cases and set the distinction uppercase / lowercase to only allow the entry of this case.  To make it easier on the user and prevent calls it does not work, they can control the input box, it allows only uppercase letters and define the uppercase distinction / lowercase to require that all capital letters.  So even if you can see the image in various cases, the box allow uppercase be entered which will allow the program to accept input.

  5. If it is not case sensitive, so they can always set the box to show only uppercase (for some reason any) which works perfectly for any deal is registered in this situation.

  6. If you are having problems with entry and suspect the acceptance of capital letters only is the cause, then try several images more before hitting the panic button.  Sometimes I find that I have to try 4 or 5 (they often have a switch button to choose an image that you think you can read correctly when the original or other choices are harder - I sometimes have trouble anyway even with my reading glasses and still need to try several times before it works)-then do not immediately assume that it is a rather simple design flaw being able to read the wretched things.  If some that there is a problem, try contacting the technical support web site support team.  They may be able to pass the image of recaptcha or reset your password (if you probably will not then be able to choose).

  7. This may be a function of the browser used.  Before assuming, is the keyboard (which is very likely if it occurs in a text area), try using another browser like some pages work differently with different browsers.  If you usually use IE, then download Firefox, Chrome or Opera and see if the same thing happens.  If so, it is probably not the browser.

  8. at this point, if you can not access due to it (forget the 'problem' if it allows you to enter and go beyond it despite showing all caps - it is not about you and is not a problem) and the website can not help, try using a different keyboard.  If it's a laptop, try a USB keyboard and see if that solves the problem or access the form from accessibility keyboard in Control Panel and see if it works.  If Yes, then you may have a keyboard problem.  First, update the driver of keyboard, firmware and/or software by the manufacturer of the computer or keyboard manufacturer, being sure to use the downloads for your machine and your version of Windows.  If this does not work, you may replace the keyboard, although it also works very well - but I doubt very much that will occur or prove to be the case, unless you have more problems associated with the keyboard that just that.

  Somewhere along the way, you will discover that this is not a problem or find the cause of the problem (it is really not that many options beyond what precedes that can cause this kind of thing and not be found using ideas, tests or methods above).  I'm almost ready to almost guarantee that you don't really have a problem, or one of them will be identity it and depending on what it is, give you an idea where to go next in terms of resolve.

  I hope this helps.  Again, I think you're very probably see how the site and not a real problem unless you can't access, after at least half a dozen tent (and perhaps someone else is who has best eyesight to try as well) and technical support of the site people confirm what is happening shouldn't happen.

  Good luck and best wishes.

• Mutable string type?

  Hello, flashing support mutable strings (ie. the channels you can change rather than make a new string that is a copy of the source string and any desired changes)?
  
  I can go down the wrong path, and one of you could have a better idea then let me have what I need.
  Imagine a text box that contains the contents of a chat conversation. Whenever someone says something in the chat, the textbox should be updated...
  
  Obviously something like:
  
  oldChatText += newChatMessage;
  
  the round is played, but it is very effective. I would like a way to update oldChatText, rather than create new channels. Also, someone has an idea about how to limit the size of the string? For example, if I wanted to keep the last 30 lines of conversation?
  
  Thank you
  Mike

  1. There's a TextField.appendText () method which is very effective.

  2. There are many TextField methods allowing to choose what part of the text, replace, move, etc.. It also has methods that allow the selection of line and many other operations. Possibilities are endless:

  http://livedocs.Adobe.com/Flash/9.0/ActionScriptLangRefV3/Flash/text/TextField.html

• Array with the element in Type String

  Hi all

  It seems that I couldn't create an array with the element in the string Type, all that available to choose is double or decimial.

  I'm sure it's my fault because I'm fresh for her.

  Any idea is appreciated,

  + Kunsheng

  You should be able to use array initialize with data type to string, see below:

  

• Convert from type string to type task DAQmx

  Hi all

  I would like to know if it's possible to convert type string DAQmx type (task DAQmx in)

  Thank you!

  This error is not associated with the conversion of the string type. I don't really know what is happening in your application, but I suspect that you are getting the error because you have not configured/registered your task properly, possibly in another application on the same system. I saw this problem before when functional using globals to save a task in one application and then read the overall task of the functional by using an another VI. This usually occurs because the functional world will save the value associated with the particular task. I would recommend that you look for the error code on the website and have a look at the following article. I apologize, but my knowledge is limited on this error.

  Recorded by program channels, NOR-DAQmx tasks and examples of scales

  TonP, I was avoiding the point of constraint

• Return type of dataframe string identifier

  Hello
  
  If I have to return a dataframe of rqScript which contains the string, how am I suppose to mention it in the return type of rqTableEval.
  
  For example, if the return value of rqScript is

  data.frame (c (1), c("Name"))

  , which is a number and the other string
  Then in the rqTableEval, identify the return values
  

  'select ID, 1 '1' chain of double'

  1 works as an identifier for the numbers but '1' doesn't work, '1' as an invalid identifier for the return string
  
  I tried with the host of permutations "-* ','. '. "\ *", "a" etc., none seems not to work
  
  Can I please get help on which must be specified as an identifier for the string type?
  
  Published by: Kedar Gupte on May 21, 2013 01:52

  Kedar,

  The string must be long enough to accommodate the output. For example, for a maximum length of 10 characters, you can do "Lucy" or cast ('a' as varchar2 (10)). You must also use single quotes instead of double quotes. In SQL double quotes are used to specify the identifiers (such as table names, column names, etc.). In your example, '1' is an unknown identifier. What you need is a string literal.

  Denis

• Arc of text (bottom) in the CS6 or CC2015

  How can I get my text to bow only on the bottom, leaving on horizontal and perpendicular sides at the top?

  See example attached please... Running CS6 @ home and CC2015 @ work.

  

  Sorry, thought about it...

  Object... Distortion of the envelope... Do with string... The lower arc (use of small negative value).

  Tried using a script font which was not behaving like I wanted.

  Went with a wheelbase of san and it worked very well.

  See attached again please.

• Configuration of the XBR-65x850c channels - I put the type of signal to the 'cable', but he always comes back to the "antenna".

  I have the TV signal by cable from the TV directly to the output - without cable box.

  Under 'Configuration of the strings' / 'Type of Signal' I choose "cable."

  The works of TV and I watch cable TV.

  I'll be back later in the day and the parameter 'Type of Signal' has changed to 'antenna' and I can see is more channels.

  I change it back and it works until the next time I try to watch TV when I find that it has changed again.

  Someone knows how to keep permanently the setting on "cable"?

  Thank you!

  This problem has been fixed with a recent update.