Structure of the event can detect the minimized window

Similar Questions

• NEITHER route can be started with the minimized window?

  We have a problem, while the GPIB instruments will not work unless NO-Trace is running.   So we have NO-Trace in our marketing so that it works when we start our test station.  But this great Trace window is disruptive to users, until they minimize the window.  Is it possible to have start OR route running, but also start with minimized window?  (Yes I know there is the box to get the Trace from OR Trace execution, but we would like that the window is running in the background - (reduced) to allow our Test window to not be in conflict with the Trace window).

  Well, it changes things because this is very probably an executable VEE? problem. Just spitballing here, but I'm guessing it's a thing of Agilent VISA OR VISA vs. As I've never used vee, I'm guessing they're using Agilent IO libraries. It looks like you can access the VISA Agilent as secondary depending on p35 here and here.

  As I said this is just a guess since I'm not familiar with VEE. I would like to confirm on the Keysight forums.

• Windows Update Agent fails to detect the updates (Windows Server WSUS with SCCM)

  Howdy

  We recently integreated WSUS in SCCM 2012, which means WSUS updates are now provided through the software Center instead of through the Windows Update client. This does not work as expected.

  However, we are using Kaspersky Endpoint Security, which has a function of software vulnerability report that we want to use. This could inform us of all the machines that do not have all their updates installed. It is a simpler than using SCCM reports interface. When searching for vulnerabilities, Kaspersky Network agent uses the Windows Update Agent service to find updates in WSUS. This function does not work on our customers, where it can detect a single Windows Update. I have a transcript example from the WindowsUpdate.log file below:

  ========================================================================================
  2016-05-25 16:10:37:917 884 7ac Agent *.
  2016-05-25 16:10:37:917 884 7ac Agent * START * Agent: finding updates [CallerId = Kaspersky Network Agent] of
  2016-05-25 16:10:37:917 884 7ac Agent *.
  2016-05-25 16:10:37:917 884 7ac Agent * Include potentially this cancels the updates
  2016-05-25 16:10:37:917 884 7ac Agent * Online = Yes; Ignore download priority = No
  2016-05-25 16:10:37:917 884 7ac Agent * criteria = "IsInstalled = 0 AND IsHidden = 0 OR IsInstalled = 1".
  2016-05-25 16:10:37:917 884 7ac Agent * ServiceID = {00000000-0000-0000-0000-000000000000} third party service
  2016-05-25 16:10:37:917 884 7ac Agent * scope of search = {Machine}
  2016-05-25 16:10:37:918 3988 d5c COMAPI<-- submitted="" --="" comapi:="" search="" [clientid="Kaspersky" network="">
  2016-05-25 16:10:38:826 884 7ac PT +++ PT: Synchronizing server updates +++
  2016-05-25 16:10:38:826 884 7ac PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, server URL = http://OURSCCMSERVER:8530/ClientWebService/client.asmx
  2016-05-25 16:10:57:878 884 7ac PT +++ PT: synchronizing extended update info +++
  2016-05-25 16:10:57:878 884 7ac PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, server URL = http://OURSCCMSERVER:8530/ClientWebService/client.asmx
  2016-05-25 16:10:57:986 884 7ac Agent * updated added {80FEF50B-F349-4BDC-B781-FF8CD6D913F6}.201 in search result
  2016-05-25 16:10:57:986 884 7ac Agent * updates found 1 to 123 categories in the search. evaluated Appl. rules of 1372 out of 2495 deployed entities
  2016-05-25 16:10:57:988 884 7ac Agent *.
  2016-05-25 16:10:57:988 884 7ac Agent * END * Agent: finding updates [CallerId = Kaspersky Network Agent] of
  2016-05-25 16:10:57:988 884 7ac Agent *.
  2016-05-25 16:10:57:990 b 3988 6-0 COMAPI > COMAPI - RECOVERY -: search [ClientId = Kaspersky Network Agent]
  2016-05-25 16:10:57:991 3988 COMAPI 6 b 0 - updates found = 1
  2016-05-25 16:10:57:991 b 3988 6-0 COMAPI-
  2016-05-25 16:10:57:991 b 3988 6-0 COMAPI - END--COMAPI: search [ClientId = Kaspersky Network Agent]
  2016-05-25 16:10:57:991 b 3988 6-0 COMAPI-
  ========================================================================================

  As you can see on this update of the transcript were found only 1. This was taken from a test machine that has been built recently and had lost a large part of the updates.

  We also have in our devices infrastructure traditional WSUS running on a different server (not SCCM), which are reports in fine and properly, Kaspersky detects missing updates.

  We determined with Kaspersky that the problem lies in the Windows Update agent and not their software. Can anyone tell if the question is because we use SCCM for updates (and therefore Windows Update agent is not working properly) or that there is another issue that can be resolved?

  Russell

  It is a forum for specific consumers.

  You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus

• Can I detect and handle an event already within a structure of the event?

  I have a VI that would do what I want, if I could detect and handle an event of second mouse click while I'm already handling a previous event (selection from popup menu).

  I hope that the picture is clear, but in words what I want is the following: I have first right-click on a chart and select a context menu item, which specifies a graphic manipulation of properties.  Often, this manipulation requires clicking on a second graph to get a reference (for example if I want to copy some of the properties of the first chart on the chart of the target).  It is, it means I'm trying to detect a second event already within a structure of the event.

  I think I could do with a state machine and some registers at offset, and if it's the easiest way, I'll do it.  I would be interested to know whether, if there is a way to detect and manage events 'nested' as I suggested.

  Thank you!

  Your code is not really that complicated.

  Yet, the problem is that confuse you it upward with the main state machine. I would use it in a small parallel loop that only manages events associated with the menu shortcuts. All this should be able to run in parallel in any event, even if the main loop updates the data in the chart at the same time, for example.

  I don't like the dialog box, it hampers the flow of work, but if you use it, use two button dialog so that the user can also cancel if necessary. Instead of the dialog box, you should just temporarily move the cursor on. I also do little to check before operating on the second graph of reason and give a time limit for the second operation.

  Here is a quick project to a more atomic shortcuts Manager. Modify if needed. There are probably bugs.

• a few seconds "turn on", how can make I make in the structure of the event

  Hi, friends of LabVIEW

  I want to leave user click and hold down a button for a few seconds to turn on a device. Using registry item and history of shift I can make it work. I wonder how to implement it with case and structured event. Which case should I choose? mouse up?

  I have attached the test code as well.

  Thank you.

  

  I'm sure there are a lot of possible solutions, but here's a way to do it with a structure of the event. Mechanical action of the button is "Switch release." Pressing the button disables the output and sets the timeout of the event at certain time structure. The timeout event switches the output to true. Any other event resets the timeout to-1 value. Unfortunately, it seems that the tool gets messed up the image, so the VI is thus established.

  

• Structure of the event can be triggered a 1 event

  I am using a structure of the event to trigger a 1 off the coast of the event.  I thought that I could check the State I want to trigger the event and this thread the Val (signaling) a Boolean property.  Then I created an event to change the value on this command expects the event fires when the value from false to true.  I think it is this writing in Val Signaling property raises the event each time not only when the value changes.

  The attachment is a simple vi to try to illustrate this point by using the iteration count to try to trigger a 1 off the coast of the event on the 10th iteration.  The Boolean 'once' varies from iteration from False to True on the 10th, but the event is fired for each iteration.  Need to run in debugging

  Any help much appreciated

  Ken

  I've seen this confusion on the value of property front of signage. You expect it would only trigger an event, if you write a different value than the control or the indicator has been set to. This is not the case. She fires whenever you write to it.

  Your simplified example wrote to the property value of signage in the while loop for each iteration. That triggers the event value changed whenever you write to it. Notice that the property is 'signs of value' and not 'value has changed the signs '.

  Some of the examples were complex with the authors of notifications and user events. But the easiest way is just to put the property within a business structure node while it is written only when you want that one off the coast of the event. It does not matter what you write to the node if you send all the data for the case of the event.

  If there is a reason you must write to the Boolean value of traffic property on each iteration of the loop you can use the value written in sub condition to run code in the event. But notifiers, queues and the user just looks complicated events.

• Can I have several structures with the same case of event event?

  Hello

  I do an application which reproduces the front of the power supply HP6675A. To do this, I did a machine to States with different States

  (initialize, measures, voltage, current, ocp, ov, store, recall, etc.). In each State, should have a structure of the event that attracts the events of the buttons, as for example: If the current state is the voltage mode and the current button is pressed the next State will be the current mode. For this purpose in each State of the state machine should be the same structure of event with the same events.

  My problem is that the Vi does not work properly when I have several structures with the same case of event event. There are some possibly to do and how? Or is impossible to have several events? I read a few posts, but I can't find solutions.

  Any help is appreciated.

  Thank you very much.

  In general, you should have 1 structure of the event in your VI.  In your state machine, the structure of the event should be in "pending" status  So you will probably start in the State of the initialization and then spend idling.  Then, the user presses the present button.  If your state machine should then, go to the current state and then return to Idle.

• How can I set up a structure of the event that sends text when the user presses the button "Return"?

  I'm new to programming of the Structure of the event.  I am trying a program which causes the content of a control to the string to be processed when the user presses the button back in after typing in the control of the chain.  I think (I hope!) that it is simple, I just can't understand how do.

  Basically, I would take the attached VI and change so that the user can send the value of control 'String In' to the indicator "String Out" either by pressing the 'Return' key or press the button 'send string. '

  Any help would be greatly appreciated.

  This example has nothing to do with the RETURN key specifically.  It fires all simply whenever the value of the control is changed.  If you click outside the text box or on another still controls the value changes and still the event is raised.  This is often the desired so if it works in your application, you good to go.

  You CAN ONLY answer a particular key if you wish.  Set your event to meet 'This VI' > key down.  Then, read the proposal Vcle on the left side of the structure of the event and compare it to the RETURN (for example).  The Boolean result of the comparison gets connected to a structure to deal with your code to run inside.  You can also wire Vcle directly to a case structure and execute different code based on which key was pressed last.

• can I use a structure of the event in another structure of the event

  Hello

  Can use a structure of the event in another structure of the event?

  Thank you

  Viviane

  I would put your waveforms in the registers at offset.  You can then use your structure for the main event to trigger on the Show 1... the value change events and process the data, however you need from there.

• Can I use Ctlref in a structure of the event with a mouse to an event?

  I have a large number of controls on a front panel. I use a structure of the event that triggers the movement of a given motor when you press the corresponding button. However, I would like to avoid creating events for identical most of N, so I relied on the use of a mouse down on the front panel event, then retrieve the reference command using the Ctlref node (with gives 'Reference to the control on which the event occurred', according to manual labview) and analyze an array of references to know which engine is supposed to move. However, it seems that this node is not (contrary to what the manual said).

  I found other ways to do what I need (I thought using a table containing details of my controls and the coords in the structure of the event node), but I wanted to know why I can't find this node (that is displayed for the event "value change" for example). I'm using Labview 2013.

  No luck for you. Mouse down on the Panel does not have the refnum control because it does not work on a control. Mouse down on a control has it, and since you can configure the mouse down events on multiple controls in the same case of event, it also provides a refnum of control so that you can still use the order in question.

  This is probably also the question that Jeff might have seen. When you set up multiple events for the same frame that LabVIEW displays only the terminal event that are present in all of these events. Terminals that do not exist in at least a specific event of the multiple events for this image are more selectable.

• How can I use the same graph of façade in several events in a structure of the event?

  I want to display my sensorDAQ signals in a graph.but I have more than one event in the case where the structure to acquire the signal and display it in the first round of graph.the is to acquire signals from threshold and its shown in the graphic as a feedback.after the first event is executed, I'll call the second event, where the other signals are acuired and compared with signals from threshold of event 1 my question is how can I use the same control on front panel in more than two events in the structure of the event? Please answer me I am stuck.

  Hello

  I have attached here an example of doing the same thing using local variables and shift registers. Take a peek inside. Shift register is always a better option than local variables.

  Kind regards

  Amine31

  (Bravo to give good answers, mark it as a solution if your problem is resolved)

• Can I activate a structure of the event with an another VI control

  I need activate an event structure in a VI with a change of value with an another VI control event. The code is included in the pictures, you can see in this post, and the variable stop is the control that should activate the structure of the event since another VI.

  .

  The code is on other forums of discurssion and is made by Randall Pursley (rpursley8).

  See the link: http://forums.ni.com/ni/board/message?board.id=250&thread.id=43960

  kiftren wrote:

  Hi to determine,

  Sorry, I can´t to open your archives because I use LabVIEW 8.2 and LabVIEW 8.5. Can you give me the image of the code in your screen in one archive .jpeg?

  Thank your for your help to determine.

• Can I record a value Object Variable Global change in a structure of the event?

  I have revealed a global variable to the user via a panel of sup, so that the user directly changes a global variable Panel.  This works very well for this application.

  However, I would like to respond to that in a structure of the event.

  I tried to register for the GV-> [command] Panel.  It seems to work, but the changes do not generate an event.

  I then tried to save the commands individually.  Also hosted in the code, it did not work at run time.

  Is this possible?  Any ideas on how to make it work?

  
  

• Structure of the event in primary vi and sub - VI with queues

  Hi all

  I have an application that uses the architecture of producer-consumer in which a queue transmits messages of a main VI by a Subvi, in response to the events of the user in the front panel. Inside the Sub VI, the queue is removed and treaty based on the corresponding message, and the result is displayed on the façade the sub of VI. User events are captured in the main VI using a Structure of the event. This works as expected.

  However, I also the controls on the Panel before the sub - VI to change the queue. My approach is to have another structure of the event in the VI sub for this. However, while the events in the main work of fine VI, events of sub - VI never treated.

  A simplified sandbox VI of what I'm trying to do is attached. As you can see, the main VI events are triggered as expected, but events in the sub VI are never triggered.

  I watched this white paper: detect an event in a Subvi from a high level VI , but it's not exactly what I'm trying to do. Instead, I'm just trying to detect an event generated within the Subvi. I searched this forum and found some research related, but none of them seemed to answer what I'm trying to do.

  Thank you

  Matt

  Your major issue here is the loop location.  While the structure should be inside the Subvi to make a message in the appropriate queue manager.  In fact, you should have 2 loops within your Subvi: 1) the QMH and (2) of the event loop.  You must use a user event to congratulate the event loop in the Subvi to stop.  You should NOT use the time-out of the Structure of the event unless you absolutely must.  And since everything in the Subvi is the message function, you do not have expectations.  They will be inactive (no CPU using) when there are no items to process from the queue or queue.

• LabVIEW 2012 while the structure of the event does not stop

  I am LabVIEW 2012.

  An example of a while loop with the structure of the event inside can not be stopped with the stop key, Boolean.  Something wrong?

  Please see the attached VI.

  Thank you.

  Yes, something is wrong. You must add one for the event in order to detect a change in value on the stop button.

  The thing is now your structure for the event rest waiting for one of the event which she handles and ight now, it handles the "close panel" event, the 'timeout' event is too manipulated, but since you do not have anything related to the terminal of timeout (top left of the structure of the event) the timeout is - 1. So, when you run the VI the while loop is stuck in the first iteration and is waiting for a sign nearby, the stop button will only take into account after that same structure intercepts an event; I think it's because LabVIEW will execute the code related to the Terminal stop of the while until after the rest of the code that he has completed execution of the loop.

  Hope this helps