Cannot connect to my network, but I can connect to my network of neighbors several.

Similar Questions

• Homegroup problem: computer cannot see the computer B, but B can see A

  I have two computers.  A race 7-Home Premium 64-bit computer is connected to the network via a wireless-N.  7-Home Premium 32 bit computer B is wired.  Computer has created the homegoup.  Computer B can see computer A and can send files to A computer and retrieve them.  However computer cannot see at all computer B.

  I'm sharing files on both computers.  Not sure what the problem is.

  Hi Hunt72,

  Can you ping the computer from computer B?

  Can you start computer in Mode safe mode with networking and see if she can see computer B? If it still does not work, do the same with computer B.

  Do you know how to use netmon to capture the activities of the network?  If so, download it and run it by trying to send files between computers, take note of all connections rejected or denied.

  http://blogs.technet.com/Netmon/archive/2008/09/17/Network-Monitor-3-2-has-arrived.aspx

  Let us know if it works or not,
  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox cannot load Amazon or Pinterest, but IE can. Other sites I use the load very well.

  Sites of load to a certain extent, but not totally. Amazon, I still see the Javascript.

  You can check for problems with the current versions of the plugin Shockwave Flash and try this:

  • Make sure you have the latest version of Flash:
    http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html
  • Check updates for your drivers drive graphics
    https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration
  • disable the safe_mode in the plugin Flash (Windows Vista and later versions)
    https://support.Mozilla.org/KB/Adobe-Flash-protected-mode-Firefox
  • turn off hardware acceleration in the Flash plugin
    https://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html
  • disable hardware acceleration in Firefox
    https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• My printer cannot print from my computer, but it can copy. My printer is a HP1300

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: It says it is out of paper, but it is not.  What can I do to change his mind? I tried to unplug the computer, tried to put off the printer and restarted, but it tell me yet it is out of paper.   Tried troubleshooting and he told me that everything was fine.  Please help0 me.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Try some of the tutorials:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#tab11

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Live Mail - E-mail which are not sent but I can't find to remove

  I was on Facebook and saw a picture that I wanted to send an email to a friend.  I click with the right button on the picture and chose "electronic image".  My form of direct mail jumped upward and in front of it, a sign in the shape of Windows Live Mail.  I clicked out of it I already signed in and used the pop up form - looked exactly like my mail normal and had my contact address for my friend available.  I sent it to my friend.

  Since then, I can't send anything to my Live Mail account, and it's one I use all the time.  I get a message that says: cannot send email photo.  But I can't find where to delete to clarify the matter.  There are now 4 emails that cannot be sent as I tried to send a couple to see if it was just the photo email.

  The email problem is not in my sent box or my project.  I saw in the application of another person for the help it has "found a shipping box that he did not know he had" but he doesn't say WHERE he concluded that.

  I really need to get rid of this email so that I can send my Windows Live Mail account.

  Help, please.

  Marion

  Never mind.  I just found the Outbox - for others - scroll right past all your "envelopes" etc and it's there on the left side of the screen.  Sigh.

  Problem solved.

  Good news - I didn't know that this community was so will come by next time when I'm doing something very stupid. Laughing out loud.

  Marion

• Windows cannot access \\RIPSERVER. You are not allowed to access \\RIPSERVER... I can see the \\RIPSERVER on my network but cannot connect.

  Windows cannot \\RIPSERVERaccrss. You are not allowed to access\\RIPSERVER... I can see the\\RIPSERVER on my network but cannot connect. I'm running with 3 computers XP Pro windows SBS 2003 domain and a Windows 2000 (\\RIPSERVER) runs a computer to plate system that I use every day. I just added a new computer Windows 7 Professional and can see everything on the network (domain), I can access the server drives (where we keep the file sbs 2003), but when I click on the\\RIPSERVER I get error (cannot access...) If I do the same with any of the XP computers that he connects very well. Please help as I cannot connect I have to make my new computer an XP and I wanted to start to learn the Windows 7 operating system. Please let me know if you need more information on my systems.

  Thanks in advance for your help.

  Hi RC383,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  Link, please refer to:http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

  My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

  Since you have formatted the PC and reinstalled Windows, your question will be handled better in the hardware forum space and drivers for Windows 7, so I'll move it there.

  Apparently, you need to install the driver of your PC network. If you used the CD to restore the PC manufacturer that should have been included, but it may be on a 2nd CD with drivers and programs.

  If not, the first thing to do is contact the PC manufacturer to see if they have a driver available for download. If the PC has a wireless network card and wired, perhaps one has been configured, but not the other and you try to use the not yet detected and installed.

  -steve

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• I can see the shared folder on the #2 computer but cannot connect.

  I can see the shared folder on computer 2 but unable to connect. It is said "see... administrator permissions. When I go to the computer and creat a hand 1, I can see on the 2nd computer but cannot connect. I can connect to the shared printer on one 1 computer file.

  When # 1 I can connect to #2 and open shared files (just like its supposed to!)

  I have checked the basics, (I can connect to the Printers folder) file sharing.

  Help, please. Both computers have a freash install WIN XP and have been updated to SP3 current peer-to-peer network, firewall is down, Microsoft Security on both

  Hello

  Run on the supercomputer network configuration wizard.  If this doesn't fix the problem:

  1. download and install the Tools of the Windows 2003 Server Resource Kit .

  2. click on Start > all programs > Windows Resource Kit Tools > Shell .

  3. type these lines at the command prompt, exactly as shown:

  NET user guest/active: Yes
  NTRights + r SeNetworkLogonRight u comments
  NTRights - r SeDenyNetworkLogonRight u comments

  Kind regards
  Chauvet J.

• Error 'this computer cannot connect to a homegroup. " How can I connect my 2 parts forming a home network?

  I'm trying to connect my pc with my pc upstairs downstairs (both HP pcs. 1pc is Vista, the other is 8.1). Now, I guess I'm on the right track to connect both PC and trying to establish them as a group residential when I get to the page of the homegroup, it reads 'this computer cannot connect to a homegroup' Finally I get 'service Homegroup provider is not running.

  How can I connect my 2 parts forming a home network?

  Thank you DVSMSC I missed it - you have reason. Homegroup is introduced in Windows 7 and works in 8 / 8.1 / 10 also, but not back to Vista.

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• My firefox cannot connect to any network after upgrade to v36 but another browser in same PC ok

  My firefox I just upgrade automatically to v36, but borrowing is no longer able to connect to any web site after reboot. (Chrome and IE has no problem). I have try to disable the proxy and prefetch IP6 and does not help. In the even they, my PC has norton installed but does not have the configuration of the firewall. The upgrade of the software automatically, please provide fix ASAP

  HI andrewcsfan1,
  I understand that Firefox cannot connect to a network after update.

  • Difficulty of problems connecting to websites after Firefox update

  What operating system do you use? What is XP?

• I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  MacBook Air, OS X El Capitan

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• T430 to 6300 Centrino ultimate upgrade detects the network but cannot connect

  Hello

  I recently bought a wifi card 6300 centrino on ebay with the correct FRU (60Y3233) of a centrino 6205. The new card detects networks, but it can't connect to the networks. no idea why?

  Edge has 6300 card option, so who have already sold it is you already tell you a lie.

  If reinstalling the drivers do not work, and your card 6205 worked previously then it means that this card has a problem that the seller did not talk to you.