Similar Questions

• Pointer is over an icon too long. It is not easy even get the internet sometimes

  I find it too difficult to navigate. Need me to places just because my pointer is over an icon too long. It is not easy even get the internet sometimes. I'm the only person who dislikes this 'new' windows?

  Hello

  These should help:

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Help! When the foreground sprite hovers over sprite bkground for the change of venue for photo

  Help!

  IM pretty new steering and need urgent advice or assistance.

  Basically, I setup a grid of squares four through four down.

  The squares are all separate 200 by 200 multi colour sprites.

  I've created a transparent center square sprite that moves directly on each square on the grid using the arrow keys:

  on exitFrame me

  go to the section

  If the sprite 18 loch > 800 then

  the loch of sprite 18 for 100 of the value

  end if

  If the locv of sprite 18 > 800 then

  the I1 of the sprite 18 for 100 of the value

  end if

  If the sprite 18 loch < 0 then

  Set the sprite loch 18-700

  end if

  If the locv of sprite 18 < 0 then

  define the sprite 18 to 700 I1

  end if

  end

  
  

  on keydown me

  If keycode = 126

  Set the sprite 18 I1 I1 of the sprite 18-200

  end if

  If keycode = 125 then

  Set the sprite 18 I1 I1 of the sprite 18 + 200

  end if

  If keycode = 123

  the value of the sprite 18 loch loch of sprite 18-200

  end if

  If keycode = 124

  the value of the sprite 18 loch loch of sprite 18 + 200

  end if

  end

  I want to write a script that changes everything what place the highlighter foreground sprite is top of a photo. It must not change once its has changed at first I just that each square to replace a different when image hovers over the sprite proposed by the arrows.

  I thought it would be easy to possibly work but it is not at all! Initially, I tried to use the predefined behavious change cast member and change the passage of the mouse or what that preset to ' if the loch of sprite 18 = 200 then' but no where near him.

  Can someone please help me here iv spent days on this thought, it would be easier than its turned on

  Here is one of my here. pathetic I know:

  -If the sprite loch 18 = 400 then

  -the Member of sprite 7 assigned to "PICTURE1.

  -end if

  THA nks cheers in advance

  I took the liberty of rearranging your existing code a bit - especially to modernize the syntax away from the 'old school' "has the property of the value object. I also put some cache regularly referred to values in local variables to save typing and perhaps provide a performance gain:

  on exitFrame me
  
    spr = sprite(18)
    lH = spr.locH
    lV = spr.locV
  
    if ( lH > 800 ) then
      spr.loch = 100
    else if ( lH < 0 ) then
      spr.loch = 700
    end if
  
    if ( lV > 800 ) then
      spr.locv = 100
    else if ( lV < 0 ) then
      spr.locv = 700
    end if
  
    go to the frame
  
  end
  
  on keyDown me
    spr = sprite(18)
    case the keyCode of
      123: spr.loch = spr.loch - 200
      124: spr.loch = spr.loch + 200
      125: spr.locv = spr.locv + 200
      126: spr.locv = spr.locv - 200
    end case
  end
  

  It is not clear from your post if the code you have posted is a behavior script and if so which sprite/channel to which it is associated, or was it a movie script. I suspect the latter because the graphical sprites are not usually keyDown sent messages.

  The extent of the change other sprites based on the location of your furniture sprite, are the sprites for BG exactly the same size as the sprite of furniture? You need your sprite furniture simply touch a tile of BG, or be completely enclosed within its limits?

  Since you're moving sprite 18 in increments of 200 and locking to [0, 0, 800, 800], you can try the following change to the above:

  on exitFrame me
  
    spr = sprite(18)
    lH = spr.locH
    lV = spr.locV
  
    if ( lH > 800 ) then
      spr.loch = 100
    else if ( lH < 0 ) then
      spr.loch = 700
    end if
  
    if ( lV > 800 ) then
      spr.locv = 100
    else if ( lV < 0 ) then
      spr.locv = 700
    end if
  
    go to the frame
  
  end
  
  on keyDown me
    spr = sprite(18)
    case the keyCode of
      123: spr.loch = spr.loch - 200
      124: spr.loch = spr.loch + 200
      125: spr.locv = spr.locv + 200
      126: spr.locv = spr.locv - 200
    end case
  
    tLoc = spr.loc
    case tLoc of
        -- adjust sprite numbers and member names to suit
      (point(100, 100)): sprite(2).member = member("picture1")
      (point(100, 300)): sprite(3).member = member("picture2")
      (point(100, 500)): sprite(4).member = member("picture3")
      (point(100, 700)): sprite(5).member = member("picture4")
  
      (point(300, 100)): sprite(6).member = member("picture5")
      (point(300, 300)): sprite(7).member = member("picture6")
      (point(300, 500)): sprite(8).member = member("picture7")
      (point(300, 700)): sprite(9).member = member("picture8")
  
      (point(500, 100)): sprite(10).member = member("picture9")
      (point(500, 300)): sprite(11).member = member("picture10")
      (point(500, 500)): sprite(12).member = member("picture11")
      (point(500, 700)): sprite(13).member = member("picture12")
  
      (point(700, 100)): sprite(14).member = member("picture13")
      (point(700, 300)): sprite(15).member = member("picture14")
      (point(700, 500)): sprite(16).member = member("picture15")
      (point(700, 700)): sprite(17).member = member("picture16")
    end case
  end
  

• The command line is no longer present when I connect on Firefox. Have to go through the history and home to see. Can you help me?

  My command line is no longer present when I connect on Firefox. Only the most top line (Firefox, file, editing, etc.). The only way to get to my start page is by going into the history and press Home.

  This has happened

  Each time Firefox opened

  == When I upgraded to the latest version, I think

  * Make sure that you have the Navigation Toolbar and other toolbars visible:  View > Toolbars .
  * If items are missing then see if you can find them in the  View > Toolbars > Customize  window.
  * If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
  * If you do not see that item then click the  Restore Default Set  button in the View > Toolbars > Customize window.
  

  See also back and front toolbar buttons or others are absent and controls, buttons and Toolbars Customize Firefox
  ---
  http://KB.mozillazine.org/Toolbar_customization

• Hovering over the triggers Drop Down Menu event "mouse Leave"

  Hi, if anyone can help with this problem, I would be very grateful.

  I have a tab control changing to another page when the user enters or mouse leaves the tab control. The purpose of this is so that the tab control becomes invisible when colored 'transparent', according to the movement of the user's mouse. This allows the full screen to use to display the video when the menus are not necessary, and menus can be displayed when the user enters into the surface of the tab. There is also a button to lock the menu in place.

  It worked fine until I added a few rings of text to a menu tab. When the user clicks on the drop-down arrow and hovers over the elements, the case of the event as if the mouse has left the tab control, tab resets back to page 1 (white page). I don't want to do it, but I still want to use the drop down menus because they are more concise and more convenient than the alternatives (listboxes, etc.). This does not happen with the buttons and other controls, only with the drop-down menus, AFAIK.

  Can anyone suggest a work around? I chose this method of relaxation because it is less demanding in processor using the mouse move event coordinates to trigger the tabs appear. I need to save so much time processor for video capture possible. I enclose my vi (Labview 2010 32-bit) with the gray tabs so you can see and test the value for yourself.

  I would add one for the event to "Operate the Menu Activation" for the controls of the ring.  This simply fuels a real constant in a shift register in time loop.  In the mouse enter and leave events add a case structure and change the pages only when the value Boolean false.  Ensure that supply the true value in the registry to offset in the mouse leave case also (other cases may use the Default of False if you don't have to string wires in all cases).

  Quick MOD after extraction of the stuff IMAQ, remove also the delay in case of loop Structure, provides it ARE necessary delays.

• Where to adjust the volume on my Inspiron if the icon on the taskbar at the bottom is no longer present

  Where can I adjust the volume on my Inspiron if the icon is no longer present on the taskbar at the bottom?

  Hello doctor,

  Control Panel / sounds / playback.  Double-click the device you want to operate.  Click the level and place it where you want and that should take care of it.

  To solve the problem of the icon, see http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/how-do-i-restore-my-volume-control-icon-on-my-task/a4f239ef-2d7d-47c3-87d7-18213f843885.

  I hope this helps.

  Good luck!

• User accounts is no longer present

  There are two user accounts that no longer appear when I turn on the machine. I searched for them and they are always present on C: but I can not change user. When I go to the user accounts the icons are no longer present. How to enable these to appear again without creating a new account

  Suggestions:

  Go to safe mode.

  Restart the computer > immediately and repeatedly by pressing the F8 key until you see a black and white screen. It's your safe mode > down and select Mode safe mode with networking.

  While in safe mode with networking...

  1 make sure that your computer is clean. Run a full scan.
  If you want, install Malwarebytes to help you do it. It is one of the best.
  http://www.Malwarebytes.org/products/malwarebytes_free

  Choose the FREE version.

  2. always in safe mode do a system restore. Choose a date where you did NOT have this problem as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  3 If the first 2 methods do not resolve the problem, do a file system check to find corrupt files. He will try to fix it if it is found.
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• Wireless adapter is no longer present in the Device Manager

  Hello

  I have an Asus laptop 1015E (http://www.asus.com/us/Notebooks_Ultrabooks/1015E/#overview) running Windows 8.  I don't know when it happened, but the built-in wireless adapter is no longer present in the Device Manager.  I tried to use the Asus install app to reinstall the driver Asus Wireless Radio control, but it just says: it is already installed.  I also went to the site of asus via an ethernet connection and tried to download the latest drivers for wireless card, but installation cannot.  It seems as if the laptop detects most hardware, so I can't install driver software. Any ideas on how to proceed?
  Thank you

  Hi wolves.

  Do you receive an error message/code?

  When a device does not work, it's mostly because the driver has been corrupted.

  Here are some ways you can follow to resolve the problem:

  Method 1:

  Check out the link and follow the steps in the article:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows-8/fix-network-adapter-problems#

  Method 2:

  You will need to install the Chipset Drivers first and later network adapter drivers.

  Reference:

  http://www.ASUS.com/us/supportonly/Drivers_For_Win8/#support_Download_36

  Method 3:

  Check the BIOS of the laptop to check that there isn't an option to toggle the map.

  Note: You can contact the manufacturer of the computer, if you are not comfortable access or make changes in the BIOS.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In addition, contact the OEM of your system and see if they can replace the adapter or run a test to make sure that the adapter is working properly.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• What to learn how to create a 'ghost image' when hovering over a picture

  Can I make photographs of product for e-commerce with the PS?

  In your original post you mentioned:,.

  create "ghost image" when hovering over a picture

  Can you explain exactly what you want?

  Do you want a strong image on a Web page that displays a "ghost image" when you go over it with your cursor?

  If so, this is controlled by the design of site Web NOT in Photoshop.

  You should contact the company that provides the development of Web sites about this issue.

• A way to return to the controls at the top of the files and thumbnails when hovering over the name of the file?  I can't even read the sticker because it has been moved to a separate column on the right.

  A way to return to the controls at the top of the files and thumbnails when hovering over the name of the file?

  I can't even read the sticker because it has been moved to a separate column on the right.

  Hi Bobca,

  I'm sorry, but the forecast of nail has been deprecated in the latest version due to security problems.

  Kind regards

  Nicos

• Refrencing objects that are not present on frame 1 of the movieclip

  Hello world!

  I work with a movieclip right now that has two frames in it.  I want the user to be able to go back and forth between pages by clicking on the tabs on each page.  They click on the button is present on the frame that it applies (so, the button to switch to the frame 2 is present on frame 1 and vice versa).

  I want to control when they are able to click back and be able to turn the buttons on and off whenever I need to, but given that the button to return to frame 1 is only on frame 2, when I reference the button fits as a null object from the main timeline.  How can I refrence an object that is not present on the first frame of a clip?

  Here's the gist of what I have.  The main timeline has an object called "mAccess" which has 2 frames, windows and on reports.  Upstairs, there are two tabs, one for Windows, one for reports.  The Windows tab is not clickable when on the frame (frame 2) reports and the reports tab is not clickable when on the chassis of windows (part 1)

  Main timeline:

  mAccess.bReports.addEventListener (MouseEvent.CLICK, gotoreportstab);

  function gotoreportstab(event:MouseEvent) {}

  mAccess.gotoAndStop (2);

  }

  mAccess.bWindows.addEventListener (MouseEvent.CLICK, gotowindowstab);           <-it gives me the error on the null object reference

  function gotowindowstab(event:MouseEvent) {since Windows does not exist on frame 1 of the mAccess.

  mAccess.gotoAndStop (1);

  }

  Thanks for you help with anything that can give me!

  the background is that you can not refer to an object that does not exist (yet).  the best workaround is to ensure that your object exists on the frames where you reference it.  the object does not need to be visible so it's not much extra work.  You can add and remove the object from the displaylist, as you see fit or activate and deactivate its visible property.

• I want a music video to play when the user hovers over a button

  Hello
  
  I want a music video to play when the user hovers over a button, but I don't want the music to start again when the user hovers over the button again. I want him to play for its entire length, does not restart if the user accidentally will be on it once more.
  
  Thanks in advance for any help.
  
  

  You can use:

• How hovering over the menu as history, bookmarks, and options buttons, open their menu expanded without hovering over the arrow beside them?

  I am at the end of "the most recent difficulty updated" and the last thing I want to do before I head for the door, it is make sure when I open the menu and hover on things like the Favorites of history and options, that their submenus open when my mouse is positioned on the words or arrows. at the present time the sub menus open only when I hover over the arrow.
  I want to do the words and their arrows, a single button with the functional purpose of the two.
  Thank you in advanced for your time.

  Do you use the extension classic restaurateur theme?

  • https://addons.Mozilla.org/firefox/addon/classicthemerestorer/

  It's one of the things that I also noticed when you use this extension.
  
  Maybe contact the developer to see if this behavior can be changed.

• Hovering over FF bookmark shows incorrect link (bunk)

  The mouse hovering on bookmark link in the sidebar (20.0.1 FF) presents information about bookmark 1 above

  I received an email from a user who has corrected this problem of setting layout.css.devPixelsPerPx 1.0. The side effect is that your font menu and toolbar area becomes small. The best solution for this is to install the extension of theme and change fonts size , and then click the an icon that it adds to the right end of the Navigation bar and adjust the size of the police of 'Normal' at 15 or maybe a little more, depending on your preference.

  For those of you who do not know the PPP support high added to Firefox 22, change its default value of-1.0 1.0 layout.css.devPixelsPerPx changes the scaling of the pages of your PPP of Windows setting (for example, 125%) to 100% (similar to earlier versions of Firefox). Apparently, there's a bug related to the ToolTips of the bookmarks bar. I have not tried the bug system to see if it has been reported, but I join you some screenshots showing it - most updated scale plus the distance between the ToolTip expected and one displayed.

• Why the mouse is hovered over the taskbar only display the date sometimes?

  As right now while I am on this site when I move my mouse over the taskbar, the date does not appear. But most of the time this feature works exactly as it should.

  So why it still does not work?

  And does anyone get off these darn malware or reinstall Windows roads! I sure Ain 'goin' t' we. Just read my about me.

  Thanks John. I'm going a few more mindful of that and try to give some useful information. At the moment it displays the date very well when hovered, but I realized that this problem seems to come and go.