Structure of the event does not not at the exit of a Btn dialog box

Similar Questions

• Cancel the registration of events does not not to change value

  Cancel the registration of events does not seem to prevent the change in value of firing event.

  I've attached an example of change that disables the mouse enter and exit events to include the value Change event.

  Document ID 4ATCBP1U

  http://digital.NI.com/public.nsf/allkb/E3E5E1B3021D8EFA8625730A0062F52D

  You use the standard event, not the dynamic one (note that the Boolean value does not have the <> ).

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• value chain control event does not trigger change

  Hello

  I am trying to scan a barcode with a barcode usb HID scanner. I use a structure of the event to detect the change in the value of a control of the chain. When I scan the barcode, the chain control updates on the front panel, but the event does not fire until I left on my mouse on the front panel. can someone help? See attached vi

  Your barcodes are probably fixed length. When you get an event, check the length. If it corresponds to the length of the barcode, then process the data, otherwise wait for more characters.  This can be treated very quickly in the case of the event.

  Lynn

• XML Gateway Inbound invoice LPX-00103: structure of a document does not match DTD

  Hello
  
  We see the following error in the Transaction monitor while receiving an incoming invoice of NSOS to Oracle. Can someone advise please know how this problem can be solved?
  
  ORA-31011: failure ORA-19202 XML parsing: error in XML processing LPX-00103: WARNING: structure of a document does not match DTD error line 1
  
  Used mapping is '171_process_invoice_002 '.
  
  Thank you.

  Hello
  The implementation of accounts payable guide suggests the map to serve as AP_INVOICE_INBOUND. But failure with javaNullpointerException for this patch 9644960 must be applied.

  http://docs.Oracle.com/CD/E18727_01/doc.121/e12795/T434884T434889.htm#I_rx2DX78ML

  Thank you
  Adkins

• Grid itemDoubleClick event does not

  Hello
  
  I have a grid in which I want to use an itemdoubleclick event.
  But my itemdoubleclick event does not respond. Pls see my code below.
  Is there something wrong with it?
  
  THX
  
  Import mx.events.ListEvent;
  
  public void itemClickEvent(event:ListEvent):void {}
  varid = event.currentTarget.selectedItem.id;
  }
  
  
  < mx:DataGrid horizontalScrollPolicy = 'auto '.
  ID = 'grd' itemDoubleClick = "itemClickEvent (event); "color =" #000080 ">".
  < / mx:DataGrid >
  

  Hello

  You must set the property to true on your DataGrid doubleClickEnabled to receive double click events.

  
  ID = 'grd' itemDoubleClick = "itemClickEvent (event); «color = "#000080"»
  doubleClickEnabled = "true" >
  

  Deepa
  Flex SDK

• Cannot process the request because a modal dialog box or the alert is active

  I can't work for the life of me why I get this message when "cannot process the request because a modal dialog box or the alert is active. I simplified my code to reproduce the problem.

  All I want to do is have a dialog box that allows me to edit items on the page... But it does not seem to allow it. I must be missing something simple.

  var selection = app.activeDocument.selection[0];
  
  dialog = new Window('dialog');
  
  var button = dialog.add('button', undefined, 'Resize');
  
    button.onClick = function() {
  
    selection.geometricBounds = [0, 0, 10, 10];
  
  };
  
  dialog.show();
  

  If you use 'dialogue', then you must leave the modal state to interact with the app was done by closing the dialog box.

  var w = new Window('dialog');
  var v = w.add ('edittext');
  var b = w.add('button');
  b.onClick = function(){
      w.close(1);
  }
  if (w.show()==1) alert (v.text);
  

  Or switch to modal MOM like brother suggested dialog boxes...

  Loïc

  Ozalto | Productivity-oriented - Loïc Aigon

• How can I open the "Convert to indexed colors" dialog box with custom presets?

  Hello

  I need to automatically open the "Convert to indexed colors" dialog box in Photoshop. Before and after that I have a few scripts that are running, so it is not possible to open the dialog manually. Also, I want to put some custom presets (like the number of colors, etc.).

  Find something similar to what I want for the color range selection (opens the dialog with the presets you put in that):

  function colorrange(enabled, withDialog, fuzziness) {
      if (enabled != undefined && !enabled)
        return;
      var dialogMode = (withDialog ? DialogModes.ALL : DialogModes.NO);
      var desc1 = new ActionDescriptor();
      desc1.putInteger(app.charIDToTypeID('Fzns'),fuzziness);
      var desc2 = new ActionDescriptor();
      desc2.putDouble(app.charIDToTypeID('Lmnc'), 31.22);
      desc2.putDouble(app.stringIDToTypeID("a"), 0.86);
      desc2.putDouble(app.stringIDToTypeID("b"), 0.31);
      desc1.putObject(app.charIDToTypeID('Mnm '), app.charIDToTypeID('LbCl'), desc2);
      var desc3 = new ActionDescriptor();
      desc3.putDouble(app.charIDToTypeID('Lmnc'), 95.34);
      desc3.putDouble(app.stringIDToTypeID("a"), 54.59);
      desc3.putDouble(app.stringIDToTypeID("b"), 49.85);
      desc1.putObject(app.charIDToTypeID('Mxm '), app.charIDToTypeID('LbCl'), desc3);
      desc1.putInteger(app.stringIDToTypeID("colorModel"), 0);
      var desc4 = new ActionDescriptor();
      var desc4 = executeAction(app.stringIDToTypeID('colorRange'), desc1, dialogMode);
    };
  

  How can I get the same thing for the indexed color conversion dialog box? Apart from doing a lot of guessing about the stringIDs.

  Is there some kind of "table of choice" for char and string ID?

  Guys thank you very much in advance! This forum has been a great help on several occasions.

  OK never mind I got it, stupid me.

  He has recorded with Listener Script and changed the "DialogMode" parameter of the function of executeAction "DialogModes.No" at "DialogModes.All".

  var idCnvM = charIDToTypeID( "CnvM" );
              var desc249 = new ActionDescriptor();
              var idT = charIDToTypeID( "T  " );
                  var desc250 = new ActionDescriptor();
                  var idPlt = charIDToTypeID( "Plt " );
                  var idClrP = charIDToTypeID( "ClrP" );
                  var idSele = charIDToTypeID( "Sele" );
                  desc250.putEnumerated( idPlt, idClrP, idSele );
                  var idClrs = charIDToTypeID( "Clrs" );
                  desc250.putInteger( idClrs, 4 );
                  var idFrcC = charIDToTypeID( "FrcC" );
                  var idFrcC = charIDToTypeID( "FrcC" );
                  var idNone = charIDToTypeID( "None" );
                  desc250.putEnumerated( idFrcC, idFrcC, idNone );
                  var idTrns = charIDToTypeID( "Trns" );
                  desc250.putBoolean( idTrns, false );
                  var idDthr = charIDToTypeID( "Dthr" );
                  var idDthr = charIDToTypeID( "Dthr" );
                  var idDfsn = charIDToTypeID( "Dfsn" );
                  desc250.putEnumerated( idDthr, idDthr, idDfsn );
                  var idDthA = charIDToTypeID( "DthA" );
                  desc250.putInteger( idDthA, 75 );
              var idIndC = charIDToTypeID( "IndC" );
              desc249.putObject( idT, idIndC, desc250 );
          executeAction( idCnvM, desc249, DialogModes.ALL ); //Change from NO to ALL
  

• How to refresh the current page after the return of a contextual dialog box?

  Hello

  In jdev 11.2.3,

  In a jsff page, I have a commandbutton control to start a dialog popup and actionListener like this:

  < af:commandButton text = "Select Bills" id = "cb1" actionListener = "#{newReceiptBean.refreshBillPending}" >

  < af:showPopupBehavior popupId = "p1" / >

  < / af:commandButton >

  or

  < af:commandButton text = "Select Bills" id = "cb1" actionListener = "#{newReceiptBean.refreshBillPending} '"

  action = "#{newReceiptBean.refreshBillPending}" >

  < af:showPopupBehavior popupId = "p1" / >

  But the 'newReceiptBean.refreshBillPending' method can be run even if it can be executed by another button like this:

  < af:commandButton text = "ExecuteWithParams."

  Disabled = "#{!}" bindings. ExecuteWithParams.enabled}"id ="cb3 ".

  action = "#{newReceiptBean.refreshBillPending}" / >

  How to run a bean method, after the return of a pupup dialog box?

  Thank you!

  Post edited by: BAO. SZ It seems after setting showPopupBehvior for the button, 'action', and "actionListener" cannot be performed more. Can someone give any help? Thank you.

  I'm not sure that clearly understand your requirment. But have you all ok or cancel button in your popup?

  Well, you can use diaglogListener in your popup if you use dialog.in your dialoglistener runs your bean method.

  see this example

  Handling Ok and the button cancel in af:dialog to context-sensitive help in Oracle ADF by dialogListener | Techartifact

• Where is the location of the AI CS4 plugin filter dialog box?

  Hi all

  IM using CS4. In the CS4 SDK sample projects, "Tutorial" is a type of filter plugin, and I want to test this plugin.

  Project is compiled correctly and created plugin. Placed this plugin in the plugins of the AI folder.

  and then started to HAVE. The plugin tutorial shows under object-> filter-> SDK-> tutorial

  I clicked on "Tutorial" plugin from the menu filters. A dialog box is open. the value of some parameters in the user interface, and then click OK.

  The dialog box disappears after clicking on the OK button.

  now, how can I get the dialog ('Tutorial') same again? Where can I see the "Tutorial" dialog in artificial intelligence?

  As if we apply a 3d rotation effect, then the 3-d rotation dialog box is visible in the appearance Panel. If we want to change the settings, we can click "3-d rotation" in the appearance Panel, then the 3-d Rotation dialog box will be opned.

  Please tell me.

  -spirit

  Depending on what your filter (that is, if it leaves an effect or if it changes only the art), he can add a message in the appearance Panel. It is generally for the 'effects' no filters, although the distinction is somewhat blurred. One of the reasons why they took the menu filters in CS4 is because most of the "filters" were actually just the art operations and better adapted to be placed as menuitems in more appropriate places. The effects really are pieces of code that are returned when necessary on the art of change their representation on the settings page.

  If you just do something art once (like the simplification of the art, or reflecting the art) so you're not an effect. If this is the case, you can create just one menuitem anywhere you feel is right, if you do not want to be locked in the object > filter. Being a filter is not really give you a lot more more. You can simply create a menuitem, respond and do your job. The filters come with luggage as parameters of filter and 'fire last filter' and whatnot, and frankly, which is phased out. Its more a concept shoehorned in Illustrator Photoshop.

• structure of the event does not record local vars

  I have a gif of a FPGA based topology I want to show some telesignalisations in.  As the user clicks on the Boolean, vertical lines appear and disappear as they click on it again, showing the current topology of closure.

  To save resources, I opted to use a structure of the event.  So far I put it for internal RX_FAC and RX_TERMXCO4AU you see at the top left of the image.

  A single loop of RX and one TX closure may be on at the time, so one of the first things that happens when the user clicks on the Boolean value is that it defines the values of all other Boolean in the same row of fake, thanks to the use of local variables.

  The problem is - the structure of the event runs only when the user actually clicks the Boolean true or false value, but not if the boolean is false through the use of a local var.  In other words, let's say I RX_TERMXCO4AU true and false RX_FAC.  If I click on RX_FAC to set it's true, then you will notice RX_TERMXCO4AU goes dark/false and RX_FAC lights.  So the value of RX_TERMXCO4AU has changed, but associated with the structure of the event RX_TERMXCO4AU does not run (that's why the vertical line between RX_TERMXCO4AU and TX_FACXCO4AU remains).

  This will make a lot more sense if you run the attached simple VI.  Right now, events exist for RX_FAC and RX_TERMXCO4AU, but it is sufficient to explain the problem I think.

  Any help is appreciated.

  The structure of the event is for events generated by users.  Writing to a local variable is a programmatic change.

  You want to do is write your value to the Value property (Signalling) of the Boolean that will change the value and raise the value change event.

• Structure of the event does not clear the queue after his release from the Subvi

  OK I'm not sure if this is a stupid question or not...

  I was trying just a few tips and stumbeled on this problem...

  So I created a sample (not exactly)

  In qqq_Main.vi just press PressMe

  (it opens a Subvi qqq.vi)

  There are two buttons to stop "Alt1" and "pylone2".

  To close the Sub - VI press either on "pylone2".

  or press "Alt1", then "pylone2".

  with the latter method of the value of closing change pylone2 is registered outside the while loop and after the closure of the Subvi should not it be erased? (Or should manually clear us it?)

  For this reason not clear, the second time I press 'PressMe' change the value of pylone2 even goes off before you press anything

  I can't look at your code at the moment, but according to your description, it seems that the system works as expected. I guess you do a completely static record of events (open the event configuration dialog box and select the controls and event).

  The first thing to clarify is your use of the term "registered". In this case, it's a problem, because the registration in the context of the protests means asking to receive the event when it happens.

  Now that you know it's important to understand where the recording is happening, because that's what determines which events are stored in the queue. When you use this type of static record, registration happens from the VI the event structure is in run mode (Note: this does not mean that the VI is actually running, but just that it's the of running or reserved for the race) and the cancellation of registration only happens when the VI mode of execution. Who is right for which you get the events in the queue of the previous run of the VI - the VI is still in run mode, then the event is added to the queue and still waiting in the queue until the structure of the event to run again.

  You can work around something like that by switching to dynamic registration of events, where you can unsubscribe to empty the queue at the end of the VI, but requires more code. Also, in 2013 LV there are a few features added to events that could allow to do this statically (I don't study all the additions, so I don't know if this is possible for static recording).

  There is a good presentation on the events of NIWeek 2013 by Jack Dunaway. You can find details of how to download the video here - http://lavag.org/topic/16091-ni-week-2012-videos/

• LabVIEW 2012 while the structure of the event does not stop

  I am LabVIEW 2012.

  An example of a while loop with the structure of the event inside can not be stopped with the stop key, Boolean.  Something wrong?

  Please see the attached VI.

  Thank you.

  Yes, something is wrong. You must add one for the event in order to detect a change in value on the stop button.

  The thing is now your structure for the event rest waiting for one of the event which she handles and ight now, it handles the "close panel" event, the 'timeout' event is too manipulated, but since you do not have anything related to the terminal of timeout (top left of the structure of the event) the timeout is - 1. So, when you run the VI the while loop is stuck in the first iteration and is waiting for a sign nearby, the stop button will only take into account after that same structure intercepts an event; I think it's because LabVIEW will execute the code related to the Terminal stop of the while until after the rest of the code that he has completed execution of the loop.

  Hope this helps

• Structure of the event does not run

  Hello

  I have a Board who I am control with loop open using a stepper motor system.  I want to run some tests to measure to what extent and how constantly the motor can move the stage.  How my software works is that I give the engine a position (number of steps), then it runs until it reaches this position.

  The motor itself and then I want to set up a structure of event so that I can give different commands without having to restart the program each time.  The three cases, I want to implement are:
  (1) giving the engine a new job to run

  (2) telling the motor home again

  (3) stop the program at any time

  I watched tutorials on the structure of the event and cannot for the life of understand me why it won't work.  The motor houses himself, enters the while loop and just stays there.  When I change the values, nothing happens.  Can someone help me understand this?

  Riche29 wrote:

  Thank you for the answers.

  Would not has to do with the fact that I do run my software on a myRIO and not my PC, doesn't it?

  Yes, yes it would be.

  The myRIO is an on-Board Unit and has no video output, and therefore is not a concept of events based on user input.  I've never used a myRIO but I figured, would not allow even you put code on the myRIO if we used a structure of the event, but I guess you can have user events so maybe that's why no error was thrown.

  The code runs normally on Windows where I tested it.  I had to disable parts of the House and run the routine because I don't have the myDAQ or myRIO software installed but the structure of the event worked as expected.

  As for the change of Position value, the witness must be in case of structure, not only in the while loop.  If it isn't then you will read the last value not a new one.  You were probably just changes to test things because in the images you posted it was in the case of structure.

• Simple example of narrow Panel? in the Structure of the event does not work - please advise

  I'm trying to implement a close interception single panel.   In the LabVIEW 2010 VI joint, I expect to see a dialog box indicating now 'close [filename]' which will then stop the VI but NOT closing the Panel.

  Instead, I see the program to run in to highlight up to the loop, execution mode then when I press the button window close Windows (X) in the upper right window of the façade, two program windows close immediately.

  Can someone tell me why this discrepancy? does not work?

  OK, this version works as expected.  I was able to find the reference 'this VI' to the title of the programming VIs and functions - functions and Application control screw - VI reference server.  (Not easy to find the help of LabVIEW.  I actually copied it from another VI.)

  It displays the message 'Now close [filename]' then put a Boolean True to stop the loop of the file.

  Thanks to those who pointed out I was making reference to an array of screws rather than a single VI.

  I think it is a very simple example that should be able to find by searching for ways to replace the narrow Windows file service.