Change profile with the profile of the other computer

Similar Questions

• Get a work wireless with the other computer

  I can't get my wireless to work, said the connection card wireless network is disabled & local connection adapter is disabled...

  I have a desktop computer & bought a wireless router for it! But can't make it work...

  Hello

  If desktop equipped with a wireless adapter to start first with her.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  ----------------------------------

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  -------------------------------------

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  -----------------

  When it works, you need to do something similar wit the wireless.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• can I connect with the other computer where it is installed creative cloud to show the desktop?

  IE computer and computer work at home

  Yes, you can share files between computers using CC.

  • Sharing files in Adobe Creative Cloud | Inspired by Adobe Magazine
  • Adobe Creative Cloud - how to share files with Clients and colleagues. Adobe Creative cloud TV: Designers | Adobe TV
  • https://helpx.Adobe.com/creative-cloud/how-to/assets-get-started.html

  Concerning

  Baudier

• all my data is all save on the local disk c, how to share the data with the other drive, local drive d.

  all my data records on the local disk c, how to share the data with the other drive, local drive d.

  Hi Jasonbichard,

  1. what type of drive is D? Is - this another partition on the same disk?

  2 Windows operating system you are using?

  You can change the location of the disk to save the data in the d: instead of C: and check if it helps.

  a. navigate to the location (username) C:\Users\.
  b. right click on the folder that you want to change the location, and then select Properties.
  c. click on the location tab and change the location to D: drive.

  d. click on apply and Ok.

• Pencil of Apple works with the other iPads, or iPad pro?

  Pencil DDoes Apple works with the other iPads, or iPad pro?

  It works with the Pro

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• How can I share 'My images' with the other user accounts on my computer?

  How can I share 'My images' with the other user accounts on my computer?

  where are the 'experts' on these forums adverstised?  I can't get an answer to a simple question.  Does anyone know how to do this?

  Here we are, ok, I'm not an expert, but try this:

  Right click on 'My images' > share > specific people... > select that you want to share this folder with.

  ...

  After that, try to connect by using a different account. If you will not be able to open C:\Users\"FirstUser"\Pictures, you try to extend the network in the left pane of Windows Explorer > expand ComputerName > expand users > expand "FirstUser" > photos

• Why when I click with the left button of the mouse on the unique tool, you open the window with the other instruments?

  When I click with the left button of the mouse on the unique tool, open the window with the other instruments

  
  

  Mohito Hi, this morning, I solved the problem by trying to support. I realized that the problem was in mice, because the click rate is at its highest level, and then click the instruments was like if he did 2. I will now set the minimum speed of the clicks.

  Thank you

• my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

  my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

  No need to worry about the disk version. He would just install an update anyway once it has been installed. Download from the link provided below and use the serial number, you need to activate.

  Updates

• Cursor flashing at the start of the system and hard drive not working do not on the other computer

  Original title: I need help with my Hardrive

  Recently I had problems with a hard disk of computers. So I'm going to give guys the full story, I fell on this computer, it's actually my mums computer and it had a blue screen at startup error. I'm sorry, but I don't remember that the error was called on the top of my head, basiclly I quikly searched online and alll they say should use fixboot. So I did and the computer booted Windows XP very well. So the next day, when I was starting the machine (just to let you know, it would be the first start since I used fixboot, other than the right after that, I don't know if it would make a difference).

  In any case, while trying to start, there was just a slider, or as underscore that retain just flashing in top left corner. I thought that maybe I should reinstall windows on another partition so my files would be safe. I did it, the installation program had no problem with it, but when I booted up I got the same line of flashing underscore / cursor in the upper left corner.

  I thought that maybe I should back up the hard drive using my other computer so I tried to plug in the hardrive in my work computer and the hardrive started to heat up and as if it worked but any hardrive was getting into my computer, I refreshed it, started the computer upward once again, nothing.

  So my question is what is the problem with this hardrive and how I save? I'm ready to do anything, use the live CD, using another computer. I have precious moments of family on the hardrive.

  Thank you guys

  Hi Joemost,

  As you have important data on the hard drive. We recommend that you contact the vendor of hard drive to diagnose hard drive or visit the nearest tech store to save your data.

  There are chances that the boot files are missing on the computer and also you could have not connected the hard drive as a slave when you connected to the other computer. Once you have saved the data, you can repair the existing windows and check if it starts successfully.

  Try these steps to repair install Windows XP:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Passport 1 TB is not recognized by my computer and the other computer. Please tell me how to solve this problem, because my files important in there.

  My WD 1 TB passport is not recognized by my computer and the other computer.  He will ask the same WD SES usb driver on the other computer. Please tell me how to solve this problem, because my important files are there. I already downloaded and installed WD smartware program but it still does not work.

  Hello

  The disk hard external does not get recognized in the other computer, there seems to be a problem with your hard drive.

  You can try to change the USB cable that lets you connect the hard drive to the laptop and check if it is detected.

  You can also see at the suggestion of this link.

  If the problem persists, contact the WD Support.

  http://community.WD.com/

  Hope the above information is helpful.

• I got a refurbished PC includes a CD of Windows XP SP3, I want to use it to install windows in the other computer and I need the product key.

  I got a refurbished pc includes a CD of windows XP SP3, I want to use it to install windows in the other computer and I need the product key.

  SP3 for xp is not the operating system, only of SP3.

  To buy a cd of xp, with key retail product #.

  Without this, you cannot install xp.

• Unable to connect with the Mac computer?

  Unable to connect with the Mac computer?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

  just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

  Original title: sync

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  I use a visual studio 2012 to make a program file,
  This is a file to execute, which is my generated program file.

  I can throw in another computer in which another computer has not installed any visual studio?

  Thank you

  Hi Chi,

  The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vslanguages, vstfs, netdevelopment, vsarch

  Keep us updated on the status of the issue.

• How to put windows 7 pro on the new computer using the same key on the side of the other computer

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  Original title: Windows 7 pro

  Tuesday, October 14, 2014 20:31:20 + 0000, 4hammond wrote:

  I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.

  You can not, for at least one (and two possible) reasons.

  1. it isn't clean if you want to have two computers, or you
  you want to remove from the old computer and put it on the new. If
  you want once, you can't do that - the rule is very clear: there
  a copy (or a license) for each computer.

  There is nothing new here. This is exactly the same rule that has been in
  effect on all versions of Windows from at least with Windows 3.1.

  2. but even if you want it on a single and from uninstall
  the old computer, you can't do it. It is because if it came with the
  computer, it is an OEM version and the biggest drawback to he a
  OEM version, is that its license it permanently binds to the first
  It is installed on the computer. He can never legally be moved to another
  computer, sold or assigned (except with the original computer).