Structuring of Code for manual, record, playback Mode

Similar Questions

• AnalogWafeform Timing.StartTime is the same for the different records continues mode!

  We read samples from the Commission NI 6132 DAQmx interface in continuous mode, i.e.

  inputTask.Timing.ConfigureSampleClock (string. Empty, 1000000, SampleClockActiveEdge.Falling, SampleQuantityMode.ContinuousSamples, 1000);

  We read the analog waveform records successfully in call back, and we look at samples - they are correct.
  We need to know the moment when trigger onset occurred for each acquisition.

  The data is read to the variable
  AnalogWaveform awf =...;

  and we do the following

  If (AWF. IsPrecisionTimingInitialized)
  {
  InitialXTimeSeconds = awf. PrecisionTiming.StartTime.WholeSeconds;
  InitialXTimeFraction = awf. PrecisionTiming.StartTime.FractionalSeconds;
  }

  The problem: InitialXTimeSeconds and InitialXTimeFraction are the same for all records and equal at the beginning of the task, i.e. time of the acquisition of the first record. What's wrong?

  Hey, I noticed that you posted this question in another forum here. Continue to work on this in this forum.

• How to enter a code for pairing manually on windows 7?

  I have the same problem with a Jambox bluetooth device.

  It pairs very well w / a phone android and iOS devices... However it does not connect to my laptop running windows 7.  It fails due to an authentication failure and pairing code problem.  I looked all over these forums and responses of 'solution' drive me crazy because they are useless and do not address the real problem.  I don't need to enter the code on the device.  I need to enter it on my laptop but I can't find a place to do it.
  My laptop never asks me a code is not anywhere I can find to enter manually on my laptop. I already know the code for the device is 0000, but I have no way to get on my cell.

  Please find a solution to anyone!

  Hello Alan,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur either if the Bluetooth drivers are not installed properly, or they are corrupt.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Uninstall and reinstall the Bluetooth drivers and check. Please follow these steps:

  a. Click Start, type Device Manager in the start search box and press ENTER.

  b. in Device Manager, expand "Bluetooth."

  c. right-click on the Bluetooth device, then click on Uninstall.

  Now you can download and install the drivers Bluetooth of the computer manufacturer's website and check.

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Bluetooth devices do not work correctly on a computer that is running Windows 7
  http://Support2.Microsoft.com/kb/980396

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I retrieve HTML 5 lossed coding hit Support mode Code for my Adobe Design Premium 5.5 CS software

  When coding HTML 5 in Adobe Creative Suite CS5.5 I use to get code hinting for HTML 5 tags. Now, after a reinstallation, all I get is indicators of code for all the ordinary HTML tags. How to adopt the code hinting for tags HTML 5?

  You can try renaming the TagLibraries.vtm file

  See 'Right' answer here

  Re: HTML5 Code hinting does not work in DW CS5.5

• number for each record that is extracted (query)

  Hello
  I want to what a number for each record that is retrieved from the recording which was released by this query
  
  For example
  For the first line/recored
  Number generated, ksnumber, date
  1, gg111 11/05/05
  2, oo235 06/12/05
  
  the query returned 2 records 1 and 2 are the number generated by this code.
  In addition if it is built in function, where in the code can I put it?
  
  
  < cfquery = name "gelov datasource ="kl90">"
  SELECT
  -------------------------------------------
  
  Of
  --------------------------------
  WHERE
  -----------------------------------------
  -----------------------------------------------------
  
  ORDER BY
  < cfswitch expression = "#Form.orderBy #" >
  < cfks value = "KSNUMBER" >
  KS. KS_NBR
  < / cfks >
  < cfks value = "DATECREATED" >
  KS. KREATDAT
  < / cfks >
  < / cfswitch >
  < / cfquery >
  
  <! - report html - >
  < cfswitch expression = "#Form.outputFormat #" >
  < cfks value = "HTML" >
  
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
  Report Kss Ctwye < title > < / title >
  < / head >
  < style type = "text/css" >
  table {}
  do-family: Arial, Helvetica, without serif.
  do-size: 10px;
  }
  TD {}
  do-family: Arial, Helvetica, without serif.
  do-size: 10px;
  }
  Th {}
  do-family: Arial, Helvetica, without serif.
  do-size: 10px;
  }
  H2 {}
  do-family: Arial, Helvetica, without serif.
  do-size: 12px;
  }
  H3 {}
  do-family: Arial, Helvetica, without serif.
  font-size: 13px;
  }
  < / style >
  
  < body >
  < cfoutput >
  < table border = "0" cellpadding = "3" cellspacing = "0" >
  < b >
  
  < td align = "center" >
  Kss Ctwye report < h3 > < / h3 > < br > < br > < table >
  < /tr >
  < b >
  < td align = "center" >
  < / h2 > report returned #getCtwyeKss.RecordCount # entries < / h2 > < table >
  < /tr >
  < b >
  < td >
  < table border = "1" cellpadding = "2" cellspacing = "0" >
  < b >
  
  < td width = "160" > Ks number < table >
  Date of creation of the < td > < table >
  <!-< class = 'dataField' td > address < table >
  < class td 'dataField' = > Type < table >
  < class td 'dataField' = >-> Description < table >
  < /tr >
  
  < cfloop query = "getCtwyeKss" >
  
  
  < tr bgcolor = "< cfif currentrow mod 2 > F8F8FF < cfelse > WHITE < / cfif >" >
  < td > #KS_NBR # < table >
  < td > #dateformat(KREATDAT,"mm/dd/yyyy") # < table >
  
  
  < /tr >
  < / cfloop >
  
  < /table >
  < table >
  < /tr >
  < /table >
  
  < / BODY >
  < / HTML >
  < / cfoutput >
  < / cfks >
  
  < cfks value = "CSV" >
  
  
  < NAME CFHEADER = "Content-Disposition" VALUE = "attachment; filename = ctwye.csv">
  < cfcontent type = "application/msexcel" > "Ks number", "Date of creation".
  < cfoutput query = "getCtwyeKss" > #ltrim (KS_NBR) #, "#dateformat(KREATDAT,"mm/dd/yyyy")" # "< tr #IIF (getCtwyeKss.CurrentRow MOD 2, OF (»), DE('backgroundColor="##999"')) # >"
  
  
  
  <!-< tr bgcolor = "< cfif currentrow mod 2 > # 808080 < cfelse > ##ffffff < / cfif >" >-->
  < / cfoutput >
  
  
  < / cfks >
  < / cfswitch >
  
  
  

  is not a Coldfusion tag. Use instead.

  The following code prints line numbers

  
  Select ksnumber, date
  from yourTable
  

  
  #currentrow #, #ksnumber #, #date #.
  
  

• Satellite M70-337 - Possible to watch & record & playback TV?

  Hello
  Can I use my EQUIUM M70-337 (standard spec) to watch & record & playback tv.., (prefer TNT connection)
  If Yes, what is the best option to connect up to..., reflected on "win tv" stuff does tosh's place, (card or usb or!)

  Have XP Home do I need new laptop with MCE
  Will be upgraded to 512 of ram? 1 gb.., help
  This tosh has 40 GB hd...? or more., as read it on net forums
  help appreciated... Thank you

  On the satellite M70-337 you will not find any signal in the ports for signal reception.
  This laptop supports only a s-video port to a TV connection output. You can use it to display the screen of the laptop on the TV.
  So if you want to save and receive TV signals, strings, you must use an external solution as a 3rd party TV card

• LabVIEW code for multiple counters from source

  Hi all

  I developed a code for an instrument of 24xx keithley of interface, but now I have a doubt that if I want to do a few 10 instrumets interface both then, how can I write the logic for this.

  Please suggest me its urgent need. several instrumrnts in the sence as 24xx, 26xx like that.

  What kind of physical connection have you instruments? Controlling several instruments is not very different from one. You may need to provide external triggers take simultaneous readings and structure your state machine to do any initialization only once.

  Your question is fairly generic. What specific problem you observe?

• How to run a framework for a flat structure of sequence for a period of time?

  Hello

  I have a loop timed measuring a resistance value every 2 seconds. I wish I had this loop timed to run for a period of time (5 minutes). The timed loop itself is placed within a flat sequence so I fear that the measure will be taken once and the next picture will begin to run, without wait 2 seconds for a successive reading (and not a loop for, say, 5 minutes).

  In other words, is it possible to have a flat sequence structure frame run for awhile before moving on to the next image?

  Thanks for your help!

  JFK_Aero

  All code within a sequence must complete before can execute the following image.  So until your timed loop is configured correctly, the following image may not run until your 5 minutes is up (N = 5 minutes / 2 s/measure = 150 steps).

• How can I find the URL codes for images stored in the Windows Photo Gallery?

  How can I find the URL codes for images stored in the Windows Photo Gallery?

  If you want the path to the current record
  right click to the picture location of a photo...
  and choose... Properties / General tab.
  Location displays the path.

  If you have a photo saved on your hard drive
  car that was downloaded on the net...
  the original URL will appear not in
  the file.

• Code product key? had reboot my computer and I need a code for Windows Vista from the bottom of my laptop

  Hi, I'm having a problem with my laptop. I bought my laptop online, a year ago, and I got a virus. Then, I had my computer reset and I need a code for Windows Vista from the bottom of my laptop. After looking through records and information, we found that he had no number. He worked initially but then recently he was asked for a product key or something of the sort code. I was using my laptop but I cannot customise my background etc.

  Can you help me?

  Thank you very much

  The code is located on a label and is a 25-digit alpha-numeric (and very hard to read) code separated into 5 groups of 5 numbers separated by dashes.  If you can't find it on the bottom of your laptop, open the battery housing and remove the battery and look there - I know of cases where this is where it was placed.

  If you can't find the product key, your only choice is to contact the manufacturer and see if they can help.  Sometimes the relocations made with recovery disks don't need to be activated (depends on the manufacturer and their recovery process must ask them and confirm before you spend money on the recovery discs).  A valid product key is required for activation if activation is required - there is no way around this problem.  And in case you are considering on it, you can't switch from one product not enabled - you need to do a clean and complete installation (update disc will not work).

  I hope this helps and that the manufacturer can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Manual records on Windows Media Center 7

  Hello, looking at TV live, every time I start a manual recording by pressing the REC button, recording starts OK but stops as soon as the current programme comes to an end, is this normal for WMC7?

  I don't want to record to track the EPG, just save until I have stop, manual is possible?

  Thank you

  Hello

  Unfortunately, the option you are talking about is by design, when you press record it is to acknowledge that you want to save just this episode/move. If you want to set a record for some time on a manual change (for example 3 hours on channel 4, you need to create a manual recording event.

  If you have any comments on Windows Media Center, you can post to: http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

• They guided me through a restore and system recovery, but doesn't not eventually give me the activation code for my windows when finished.

  I had a problem with my window 7 do not allow me to do live updates. Supprt Tech guided me through the steps necessary when requiring eventually get a difficult access remotely guided. The tech assured me that since I don't have the activation code for my Windows 7 ultimate that it provide me on. That I would be prompted to enter one after recovery and the restoration was complete.

  I wonder if I'll be able to get this code now?

  Also, I lost all text documents I had written and recorded? We did a flash drive recovery I've used but I am unable to locate my document.

  Thanks for any help.

  System Restore does not destroy documents, but a recovery will depend on what has been done.

  If the remote technician entered the product key, so he could be there.

  First of all:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

• code for all new creative cloud educard Bookstore says invalid

  Hello

  When I visit www.creativecloud.com/educard and follow the direction that the code for all new creative cloud educard Bookstore says invalid, screenshot below, is there a better way than this forum to find someone who can help?  can anyone send me please?  y at - it a live support person, I can call? :

  [personal information deleted... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [If you send messages by e-mail, please turn off your "sig file" function for display]

  [NEVER POST A SERIAL NUMBER OR AN OPEN FORUM BUY!]

  [You gave your number to all who read this message before]

  [I removed the number... or those who receive all their messages of forum by e-mail]

  Well, your redemption code is now useless after being posted in an open forum

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Playback mode

  I want to be able to hide in playback Mode, but I can't now. I have a skin everything except the title of the PDF as well as the close, minimize and maximize the functions. It makes me crazy... How can I fix?

  I thank very you much for your kind reply!

  Somehow now, simply by rebooting my computer, the problem is solved itself!

• I need authorization code for photoshop cs3

  I need authorization Code for photoshop cs3 REMOVED serial number

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  You must have purchased a.  If you did, and you need to locate... Find the serial number of your product Adobe quickly