Stuck in the temporary user after the restore point - no access to internet & apps

Similar Questions

• Will system restore remove e-mail accounts created after the date of the restore point?

  Original title: System restore

  Will system restore remove e-mail accounts created after the date of the restore point

  Hello Nick,

  The emails and your gmail account settings would not be affected. But, if you have configured your user account in Windows 8 with the newly created Gmail account, these configurations too after the restore point then only, would be affected not the main account to the Gmail server.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  Thank you

• lost all the restore points after the reinstatement of windows

  Original title: have just re-recorded windows software, now Ifind I lost all the restore points. How can I get the old one back?

  Windows has been registered online. Checked restore points after recording and found that the only listed restore point was created when the software has been registered. How can I find the previous restore points?

  If you reformatted and reinstalled windows, you will lose any restore points. Theyre gone

• Dates of the Restore Points are one month in advance

  For reasons I don't understand, the date of the day on my computer was changed to one month before the effective date, for example from May 13 to June 13, 2013. As a specialist, I kept getting messages that my Microsoft Security Essentials were outdated. Later, I discovered that all the restore points created after May 13 are dated June 13. I corrected the date and have updated Security Essentials and things are back to normal, but I have several restore points, a month in advance. Restore recent points are correctly dated now, but what can I do on these wrong, before the restore points. Thank you.

  If the pc works fine, then 2 options:

  1 turn off the system restore, which will remove all items, reboot, restart System Restore, and a system checkpoint will be created.

  2. go to disk cleanup, use the tab options, System Restore, cleanup, it will erase everything but the last system restore points.

• Error snapshot VSS «file too small startup...» "during the restore point creating eventlog ID 12289 in Windows 8

  I am unable to do a restore point. There is plenty of space on both partitions.
  Config: A single drive with 2 partitions, one primary and one extended logical partition with Windows 8 on logic in dual boot with Windows 7 on the primary. The restore point creation in Win7 works OK but in Win8 it never worked alhthough all parameters seem to be OK.
  Device configuration:
  DISKPART > select disk 0
  Disk 0 is now the selected disk. NOTE: there is only 1 disc
  DISKPART > list disk
  Disc # status size free Dyn Gpt
  --------  -------------  -------  -------  ---  ---
  * Online drive 0 93 GB 1024 KB
  DISKPART > list volume
  Volume # Ltr Label Fs Type size status Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  Volume 0 DVD - ROM 0 B G no media
  Volume 1 - D drive of W7 NTFS Partition 54 GB healthy system
  Volume 2 C disc W8 NTFS Partition 39 GB Healthy Boot
  DISKPART > list partition
  Partition # type Offset size
  -------------  ----------------  -------  -------
  Partition 1 primary 54 GB 31 KB
  0 39 extended 54 GB GB partition
  Partition 2 logic 39 GB GB 54
  ---> Note: I do not understand partition 0, there are only two partitions!

  Extract from the event log. Error ID 12289 0 x 80042306:
  The volume shadow copy Service error: unexpected error
  DeviceIoControl (\\?\Volume{6fae1bd1-6bbe-11e2-af9b-806e6f6e6963}
  (- 0000011C, 0x0053c008, 007FB8D0, 0, 007FC8D8, 4096, [0]).  HR = 0 x 80820001,
  The startup file is too small to support persistent snapshots
  Operation:
  Treatment EndPrepareSnapshots
  Context:
  Execution context: System Provider
  ---> NOTE: occurs 4 to 5 times

  Cannot create (process = restore point
  'C:\Windows\system32\systempropertiesprotection.exe ';
  Description is W8 FDC shadow;. Error = 0 x 80042306).
  ---> NOTE: 1 times

  VSS commands: WRITERS, WMI and MSsearch system has failed...
  _________________________________________________________________________
  List writers C:\Windows\System32>vssadmin
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line too
  (C) copyright 2001-2012 Microsoft Corp.

  Author name: 'Task Scheduler Writer'
  The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
  Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
  Status: Stable [1]
  Last error: no error

  Writer name: 'recorder VSS metadata store.
  The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
  Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
  Status: Stable [1]
  Last error: no error

  Writer name: 'Performance Counters writer. "
  The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
  Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
  Status: Stable [1]
  Last error: no error

  The writer's name: "System Writer".
  The writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
  Writer Instance Id: {b796dce1-206a-472b-bb86-5417041b341c}
  State: [7] failed
  Last error: Timed out

  Author name: 'ASR Writer.
  The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
  Writer Instance Id: {eaf13613-1a24-44b5-8622-8e691f1fb074}
  Status: Stable [1]
  Last error: no error

  Writer name: 'writer of Service MSSearch.
  The writer ID: {cd3f2362-8bef-46c7-9181-d62844cdc0b2}
  Writer Instance Id: {43272e0e-d81a-4aa5-abe9-f6bbbfa6f3b0}
  State: [7] failed
  Last error: Timed out

  Author name: 'Shadow Copy optimization Writer. "
  The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
  Writer Instance Id: {20038d53-ecd7-4332-b2f5-ad9a5c465220}
  Status: Stable [1]
  Last error: no error

  Name of the author: "COM + REGDB Writer".
  The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
  Writer Instance Id: {bf7bd8e4-5aa8-412a-a401-528d6100203a}
  Status: Stable [1]
  Last error: no error

  Author name: 'Registry Writer'
  The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
  Writer Instance Id: {77018269-1865-4b89-b810-e4a9b6a3b5ab}
  Status: Stable [1]
  Last error: no error

  Author name: 'BIT Writer'
  The writer ID: {4969d978-be47-48b0-b100-f328f07ac1e0}
  Writer Instance Id: {6a7abc2b-e868-45cb-be06-f63e19fb1510}
  Status: Stable [1]
  Last error: no error

  Author name: 'WMI Writer'
  The writer ID: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
  Writer Instance Id: {848fabfd-fc83-4c67-ba79-92b274dab8eb}
  State: [7] failed
  Last error: Timed out
  _________________________________________________________________
  Mountvol

  C:\Windows\System32>mountvol
  Creates, deletes, or lists a volume mount point.

  The possible values for VolumeName along with current mount points are:

  \\?\Volume{6fae1bd0-6bbe-11E2-AF9B-806e6f6e6963}\
  D:\

  \\?\Volume{6fae1bd1-6bbe-11E2-AF9B-806e6f6e6963}\
  C:\

  \\?\Volume{6fae1bd6-6bbe-11E2-AF9B-806e6f6e6963}\
  G:\
  ----------------------------------------------
  Lists of C:\Windows\System32>vssadmin providers
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
  (C) copyright 2001-2012 Microsoft Corp.
  The provider name: 'Microsoft Software Shadow Copy provider 1.0 '
  Provider type: System
  Provider ID: {b5946137-7b9f-4925-af80-51abd60b20d5}
  Version: 1.0.0.7
  _____________________________________________________________________

  C:\Windows\System32>vssadmin list shadowstorage
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
  (C) copyright 2001-2012 Microsoft Corp.

  Shadow copy storage association
  Volume: (D :) \\?\Volume {6fae1bd0-6bbe-11e2-af9b-806e6f6e6963} \)
  Shadow copy storage volume: (D :) \\?\Volume {6fae1bd0-6bbe-11e2-af9b-806e6f6e6963} \)
  Memory copy ghost used space: 0 bytes (0%)
  Storage space copy allocated Shadow: 0 bytes (0%)
  Maximum space memory copy Ghost: 3.78 GB (7%)

  Shadow copy storage association
  Volume: (c) \\?\Volume {6fae1bd1-6bbe-11e2-af9b-806e6f6e6963}.
  Shadow copy storage volume: (c) \\?\Volume {6fae1bd1-6bbe-11e2-af9b-806e6f6e6963}.
  Memory copy ghost used space: 0 bytes (0%)
  Storage space copy allocated Shadow: 0 bytes (0%)
  Maximum space memory copy Ghost: 3.13 GB (8%)
  ---------------------------------------------------------------------

  Material:
  _________
  Computer brand name: Hewlett - Packard HP Pavilion dv6000 (RG892EA #UUG)
  Operating system: Microsoft Windows 8 Professional build 9200
  Processor: AMD Turion64 X 2 TL - 50 (1600,0 MHz)
  Motherboard: Quanta 30B 8 (nVidia GeForce Go 6100 (C51MV) + MCP51)
  Memory: 2 GB (dual channel)
  Hard drive: FUJITSU MHV2100BH (95 396 MB (100 GB))
  Optical drive: HL-DT-ST DVDRAM GSA - 4084N (DVD + R DL)
  Graphics card: nVidia GeForce Go 7200 [HP]

  Hard drive
  --------------------------------------
  Drive model: FUJITSU MHV2100BH
  Variable speed drive: SATA 1.5 Gb/s
  Drive serial number: NW12T662BYPM
  Firmware revision: 892C
  Disk capacity: 95 396 MB (100 GB)

  Hi Francis,.

  Thanks for posting the query on the Microsoft Community Forum.

  From the description, it seems that the error revceive you associated with VSS snapshot.

  1. What security software is installed on the computer?
  2. Do you have any third-party backup program installed on the computer?

  To begin troubleshooting, I would suggest that you do Check Disk

  • Press Windows key + R
  • Type "cmd" to open the command prompt.
  • Type Chkdsk/r , and press enter.

  Note:

  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  Reply with more information about the issue so that we can help you further.

  I had the same problem with a HP dv5000 has an Intel Dual Core processor, after installed the 10 Pro Update window cleaning, after the update sent by Windows Update Service left me with this problem.

  Thank you post I did check in the menu properties C: Tools.

  After that, I was able to create a Restore Point.

  Thank you very much for your message.

• How can I change the time in the restore point I come a few minutes before I deleted my manuscript

  ORIGINAL TITLE: Help,

  I deleted and saved on a manuscript, how can I change the... TIME... in the restore point I come a few minutes before I deleted my manuscript..., the DATE is accurate, however the time is off in ten minutes.  It is important that I have recover my document...

  If you're talking about a system restore, this will do not in any case because it does not affect data files, only the system files.

• I want to do "System Restore" in Windows Vista. But I can't change the restore point

  I want to do "System Restore" in Windows Vista. But I can't change the restore point. How to configure manual restore point? Can I enter a date I want to restore? I tried, but it did not work.

  Original title: in Windows vista system restore

  Hello

  Either the system restore point is already created for an earlier date, or is not available.

  You cannot create a restore today Point to return to yesterday.

  You can create a restore today Point to use in the future.

  Here's how to use the Vista system restore:

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• How to allocate more space for the restore points

  with the new restore points that the system made by himself, I lose a few old for which I was sure and have been designed in a very good condition.

  Hello

  This will help you control the Restore Points:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  Hope these helps.

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Will be Check Disk wipe-out the restore points?

  Vista SP2 on and HP m8000

  If I run the disk check is it existing of smoothing on restore points?

  Thank you

  M.

  Hello

  No, unless there's something wrong with the part the drive on which the Restore Points are
  writing the. He would remove them is possible but unlikely. If you want to see
  If drive a mistake yet not be repaired then run CheckDisk (chkdsk) and
  do not check the option FIX or RECOVER. Checkdisk will then tell you if there
  all errors and where they are. Then, if necessary, and there are errors, you can run
  CheckDisk again with the FIX (/ f) and necessary RECOVERY options (/ r).

  To simply check the drive without affecting it uncheck the boxes here displayed in method 1
  #8 and then no data will be affected if there are any errors found.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ======================================================

  CheckDisk will show its results with a report on the screen but if you wanted to
  read the newspaper subsequently use these methods.

  CHKDSK (short for Checkdisk)-<-- see="" the="" vista="" log="">
  http://en.Wikipedia.org/wiki/chkdsk

  Journal of checkdisk is EventViewer which is easy to read with MyEventViewer utility.

  Look in the Event Viewer to see the newspaper.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  Control Panel - Classic view - administrative tools - event - left panel - Windows logs Viewer - under the
  above - click on request - in the middle column, scroll down the list that indicates the Source - click Wininit.
  good Panel - Wininit event - click on the event properties - new window will open with the journal you want.
  Scroll as needed. Event ID is 1001.

  ---------------------------------------------------------------------------------

  If you clear the log before you checkdisk annex, it is easier to find but by time and Date
  should be easy enough.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Restore the system to a Restore Point fails: System Restore was unable to extract the original copy of the restore point consoleDirectory.

  I can create restore points and when updates are installed the system automatically creates a restore point. The problem is that I can't get the system to restore to a restore of these these points.

  System Restore was unable to extract the original copy of the restore point directory

  Source:%systemroot%\registration

  Destination: ComPlusStaging

  Hello John R H,

  Are you able to restore system successfully on a different date, or that you get the same result?  I looked through this thread and was curious to know why you want to perform a system restore?  Having other issues in addition to what you have described?

  Try to make a last good known Configuration and see if you are able to perform a system restore.

  Last good known Configuration:

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Please let us know status.

• I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.

  Original title: Windows 7 system restore always fail.

  I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.  I don't have Norton AntiVirus.

  If anyone can help solve me this problem I would be very grateful.

  Thank you for your response.  I forgot to mention in my first post, I tried both methods without success.  However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.

  Thanks again.

• Add features of Windows 8 error "failed to create the restore point.

  Original title: IL SAID AROR MESSAGE CANT CREAT RESTORE POINTWEN I ADD FEATURES

  I WENT TO ADD FEATURES PURCHASED WIN 8 PRO PACK NOW WEN I'LL INSTALL SAYS CANT CREAT RESTORE POINT PLEASE TRY AGAIN

  MARKTRAVIS

  Hi Mark,
   
  I appreciate the efforts that you put to publish the query on this forum.
   
  However, it would be better if you can provide some details related to the query:
  (1) is there a third party security software installed on the computer?
  (2) there the restore points that are created on the computer before this problem?
   
  System Restore automatically recommends the last restore created before a significant change like installing a program point.
   
  To store restore points, you need at least 300 megabytes (MB) of free space on each hard disk with the system on Protection. System Restore can use up to 15 percent of the space on each disk. As the amount of space fills up with restore points, System Restore deletes older restore points to make room for the new.
   
  You can also follow these steps to increase the memory allocated for the restoration of the system:
  (a) press Windows and Pause Break to open System Properties.
  (b) click on the System Protection option.
  (c) click on each disc.
  (d) click on Configure.
  (e) check if the allocation of memory on each hard disk is allocated.
   
  The settings above, you can also check if there are restore points available on the computer. Click System Restore, and check if you are able to find restore points.
   
  To solve the problem, if you have installed a third-party security software on the computer, I suggest you temporarily disable and check if it solves the problem.
  Important note: Security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Please let us know about the status of this issue.

• After the restoration of my PC, my internet now wks but the other internet account user has clear closing down

  I had problems with my internet after adaptation movies via A / V inputs.  After several hours I reset my PC to factory settings.  Now, I can get the internet as the administrator of the user. But when I created user account my wife that we are unable to connect to internet, it keeps closing.  However, the internet is connected.  I can't get into AOL on behalf of users,

  Hello

  My first question is have you run a virus scan on the computer since the restore to factory settings? That would be my first suggestion.

  Second, have you tried to boot mode safe mode with networking? See the profile of your wife is able to connect then? Also, it's a good idea to run a scan antivirus in Mode safe as well.

  Finally, what web browser do you use? Is that what you mean by "it keeps closing," maintains close the web browser? If so, that could suggest a problem with the browser itself, or maybe (however unlikely) the security settings for the user account of your wife.