stuck iOS apps to install on the device (ios 8.4, code 6.4, MAF 2.1.3)

Similar Questions

• Works at a newspaper, finds it difficult to make a presentation made in Indesign and must be transformed into an app for Ipad / IOs.  This is the case in DPS consgigo generate the .ipa file put nsao install on the device, the message "installation."

  Works at a newspaper, finds it difficult to make a presentation made in Indesign and must be transformed into an app for Ipad / IOs.

  This is the case in DPS consgigo generate the .ipa file put nsao install on the device, the message 'installation' all the time.

  If I get the zip file and the XML of the person who generated the folios, as indicating that the DPS?

  Recognizing

  This happens when you try to install .ipa to a device that is not listed in the mobileprovision file. Make sure that the UDID of the device is included in your Developer Portal iTunes and when you generate the new file mobileprovision that you explicitly check the box next to the new feature that you added.

  Then download the new mobileprovision file and make sure that you use a new one, not the old, to get the app to the App Builder.

  Neil

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

• BlackBerry Smartphones HELP GUYS... App world installed, but the missing icon

  Hello.. Please please please give me a solution... I have a bb torch 9800... I received a msg to upgrade global app... after the upgrade... I can not find the global icon... Although it is installed on my phone... the icon is not the case to find. I tried to remove and reinstall but the icon does not appear... Help... I'm going you crazy... its so frustrating.

  Try this-

  When your device is turned on, remove the battery for a minute and then reinsert the battery. This do a reboot your device that addresses minor issues with the BlackBerry.

  If make above don't resolve the issue, then follow the instruction articles knowledge base being:

  • KB29422 BlackBerry App World icon is missing after upgrade to BlackBerry App World 4.0.0.63 to 4.0.0.65

• Detect if iBooks is installed on the device

  Hi guys, I have to find a way to detect if "iBooks" is installed on the machine where I'm running my app.

  Can you help me?

  I use this DONKEY to determine if twitter and facebook applications are installed.

  https://github.com/StickSports/ANE-can-open-URL

  I've just implemented the extension and have not yet test on the latest version of iOS, but it seems to work great so far...

  Accessories for Richard Lord for sharing his code! : )

• Backgound App should start after the device to start

  Currently, I made soft to work by clicking on it, now I want to do as a background

  Problem:

  (1) I want my app to start after starting the device is finished.

  Personally, I don't like the method of 'sleep' suggests BBDeveloper, and which is also in a KB article.

  Search the knowledge base for this and the reason why you may need to use alternatives.

  I'd rather have a listener and use the method of power if the unit is start-up.

  If this issue is related to a Thread of yours that I have already commented on, there is no need for you to worry if you are inStartUp or not - your background code will run OK.

• My computer or Windows Exployer do not recognize my CD/DVD equipment. I checked and the best driver currently installed, but the device is apparently disabled. Help!

  I went into the properties of the device, but could not find a solution.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• What happens if I restore and configure my iphone like new without having the latest iOS installed on the device?

  I intend to restore my phone. Currently installed 8.3 iOS and iOS 9.1 is available to me. But I don't want to upgrade to iOS 9. It will ask to update iOS 9 after restoring? Help, please

  He won't ask. It will just upgrade to the current version of the iOS when you do a restore via iTunes.

• App, re-installed with the profile of another person!

  On my iPhone with iOS 9.2.3 6plus I deleted and reinstalled an application called Insight Timer.  I used this app on multiple devices, and my profile has a little info about my story and activity, as it's a social media app.  It has my picture, name and e-mail.  But oh, woe, when I reinstalled it, it came with a totally different person's profile.  How can this happen?  What can I do?  Pretty scary.  I contacted the other party; She was surprised, is not tech savvy and made very little use of the application itself. Now, everything I do (join a group, make a friend, a mediation session time) appears on their profile!  I contacted the team that sells the app - they had no solution or an explanation, only questions.  I answered those, and then all the e-mail they sent me has disappeared from my e-mail account!

  I'm not familiar with this app, but don't you just the log of that account and log into your account?

• Signed app refuses to launch the device - how to debug?

  I'm trying to get my first (Powernap) app to run on a physical device.  It works well in the Simulator, but it will not start when I try to put on a real device.  I do not yet know where to start, when I press the icon, nothing happens.  Literally nothing.

  When I tried to install the application before I signed it, I received the standard message on the application tries to access the secure API (its an app webworks who plays sounds).  But now, after that I signed, no message is displayed, without luanch scree, etc..

  I tried to delete the app, unsigned, by restarting and then re - install.

  I think that I correctly sign because I don't get any errors.

  How can I know where is the problem?  Pointers?

  Here's my build and load as follows:

  C:\Program Files\Research In Motion\BlackBerry WebWorks Packager\bin>bbwp.exe  "\\vmware-host\Shared Folders\common_cross_builds\torch\ProjPowernap\bu
  ild\src.zip" /g
  [INFO]                  Parsing command line options
  [INFO]                  Parsing bbwp.properties
  [INFO]                  Validating application archive
  [INFO]                  Parsing config.xml
  [INFO]                  Populating application source
  [INFO]                  Compiling BlackBerry WebWorks application
  [INFO]                  Starting signing tool
  [INFO]                  Signing complete
  [INFO]                  Generating output files
  [INFO]                  BlackBerry WebWorks application packaging complete
  
  C:\Program Files\Research In Motion\BlackBerry WebWorks Packager\bin>JavaLoader.exe load "\\vmware-host\Shared Folders\common_cross_builds\torch\ProjP
  owernap\build\bin\StandardInstall\src.cod"
  RIM Wireless Handheld Java Loader
  Copyright 2001-2009 Research In Motion Limited
  Connected
  Loading src                           Done
  2872980 bytes sent at ~1641702 bps
  Disconnected
  
  C:\Program Files\Research In Motion\BlackBerry WebWorks Packager\bin>
  

  Your application has not been signed with key RRT.  Have you installed all 3 csi files that were sent to you?  Each of them covers a different key, and all are required to sign a request.

• my test app instantly close on the device

  Hi all

  I have the following problem:

  I created a dummy-app (just a blank page with a Sprite on her listen to a key event) - and it does not work when I play it on computer office-air-debug-player.

  However, when I deploy the application on my device (which works, I see the icon and the name and everything) - it will show the splashscreen (it is not custom, yet) for a very short time and then just closes the application.

  This happens in all cases: when I debug the FlashBuilder 4.5 or when I create a release build (which is still signed) and install it via the command line.

  I'm the author and authorId in the blackberry - tablet.xml I put the version numbers in the two .xml files.

  What else could be missing? Some help would be really appreciated - thank you!

  see you soon,

  olsn

  Have you read this about Flash Builder 4.5?

• Purchased Acrobat XI Pro want to install on the device #2. have the SN will not do not register the product is not on my computer, but it is installed on my computer

  25/02/15 went online and buy Adobe Acrobat Pro XI. Installed on my first camera without problem. Have a new Surface Pro 3 and want to install a copy on it. Very confused because there is no "precise" on the site where download instructions again. Any link is directed towards a purchase, not how to download a product you have already purchased. I download the software from the free trial version of creative cloud and its on my Surface Pro 3 now. Tried to register with the SN of my purchase last week (because I can have 2 devices), but he does not recognize the version of the software for my device and will not accept the SN to complete the registration.

  http://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

  This time, save the download to a CD or HD backup for the future. Do not expect the download to be there permanently (note you don't see really most older versions!).

• 210 mobile G1: how to recreate the image on a laptop with Windows 7 210 installed on the device

  Hello

  I try to put an image that has been created in the image of fog service 1.2 and am having problems starting the fog in ipxe. I tried to update the chip set drivers and the network drivers with no luck. When you start first in ipxe, the machine acts like it wants to register the machine, but then it just keeps restarting. I can never get fog gui so that I can recreate the image on the machine. Any suggestions on what I need to do to make this work. I have 30 laptops to recreate the image.

  Thank you in advance,

  Angie

  Step 1: Copy the Source files to the PXE server

  In this step, you copy Windows PE source files to your PXE server.

  1. On your computer, click Start, point to programs, point to Microsoft Windows OPK or Windows AIK, and then click Windows PE tools command prompt.
     The menu shortcut opens a command prompt window and automatically sets environment variables to point to all the necessary tools. By default, all tools are installed in C:\Program Files\\Tools, where can be Windows OPK or Windows AIK.
  2. Run the Copype.cmd script. The script requires two arguments: architecture and destination location of the hardware store.
      

• I see an activation which invites when I enter my product key says that's an upgrade install not the device, this worked fine on my old hard drive.

  Prompt for activation!

  Changed the hd on my pc and upgrade to ultimate version so I had to install xp first.  Now, I see an activation which invites when I get home my says product key is for upgrade not clean installation, it worked well on my old hard drive, there is no option in the wizard product activation phone how to turn it on

  Update install requires that the eligible previous operating system is installed and activated until the key is working.

  Yu seem to have correctly installed the OS upgrade - and it will never work without assistance.

  If - and only if - you have a valid COA sticker on your computer, you can try either by calling the line Activation, as suggested by Riz_Ford, or you can also try the method of double-install from here...

  http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media

  Note that the same procedure applies for WIn 7 for Vista.