Stuck on 0% when reinstalling Windows Vista

Similar Questions

• Error code 0x8007001F when reinstalling Windows Vista

  Well I try to perform a restore of the system since the restore disc, that I got with my PC 4 years and it copies the files and broadens their and then I get the 0x8007001F error code and he said: he can't complete the installation.

  Please can I just get a new clean copy of vista?

  Well I try to perform a restore of the system since the restore disc, that I got with my PC 4 years and it copies the files and broadens their and then I get the 0x8007001F error code and he said: he can't complete the installation.

  Please can I just get a new clean copy of vista?

  Hey becci1978

  you don't say why you were reinstall vista

  You may have a hardware problem with your computer that causes the error

  I suggest you contact your computer manufacturer for assistance with the help of their recovery methods

  Walter, the time zone traveller

• I want to reinstall Windows Vista, but I do not have a disk when I bought the laptop; I don't have product key, however; What should I do?

  My old laptop is now very slow performance, no doubt because it is hopelessly cluttered with unwanted stuff, viruses etc.. So I have tried various methods of cleaning without success, I decided to reformat (all data on it has been transferred to a new laptop) and start from scratch by reinstalling Windows Vista Home (installed when I bought it). But no installation disc has been delivered, although the product no key. is located on the underside of the laptop. What should I do? I could ring you, but I don't have a land line, and a long call on my cell phone would probably cost a fortune. It would be great if you were ringing me to talk me through the process (07760 101610)

  Greetings - Graham Durbin

  Hello

  Sorry, this is not Microsoft and we don't do phone calls that we are for the most part, Windows users help each other here...

  Here are the different ways that you can reinstall Vista.

  See which is more easy for you.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I need to reinstall Windows Vista, but it's come with a disk when I bought my computer

  I need to reinstall Windows Vista, but it's come with a disk when I bought my computer.  How can I get a copy of it?

  I need to reinstall Windows Vista, but it's come with a disk when I bought my computer.  How can I get a copy of it?

  1. call the manufacturer of your computer, ask a set of recovery disks. The entire cost is low and the money is well spent.
  The game allows you to restore your computer. Ask a manul on how to use the recovery discs.

  2. While the site of the computer manufacturer, ask to speak to a technician. Ask the person to teach you how to access your computer, Partition Recovery and utilization of the partition to restore your computer to factory State.

  3. see if you can find a friend who has a Microsoft Vista Installation DVD. Borrow it and reinstall Vista using your product key from the computer.
  If you are lucky enough to a friend, here's the tutorial for pure install using the Installation of MS DVD:
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  4. this link may be useful...
  How to replace Microsoft software or hardware, order service packs and replace producthttp://support.microsoft.com/kb/326246 manuals

  Good luck.

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• What should I do if I accidentally reinstalled windows vista when you try just to update?

  Help! I had trouble to receive updates of service package and so I put my windows boot drive and I just wanted to update, but I miss somehow understood and reinstalled windows vista. I have nothing now. Have I lost all my documents, photo, music and software?

  Hello

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• How can I reinstall Windows Vista?

  I have a Toshiba laptop with Vista installed ready recently, but what happens if, at some point in the future, I need to reformat?
  How can I reinstall Vista without a disk?

  Thank you.

  I think that you have not looked in the user manual. This, because there you can find a lot of information how do I reinstall Windows Vista.

  However, the computer Toshiba laptop with Vista have a HARD drive recovery function. On the second partition is a file called "HDDRecovery". It contains the image of the factory settings, and so you can reinstall the laptop without CD/DVD.

  In addition, you can also burn the recovery disks with the Toshiba recovery disc creator and you should do it too. If a faulty HARD drive or something else you need this floppy and otherwise, you must pay for it.

  Normally, you should get the message of reminder of recovery on your laptop and it contains interesting information:

  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Activation of reinstalled Windows Vista - the product key already in use message

  My system crashed - continueously runs blue and the cause was the motherboard. Replaced the motherboard and making it to level the motherboard and processor. The new motherboard and processor are compatible with Windows Vista. After you have reinstalled Windows Vista activation using the internet's message that the product key is already in use. What should do?

  If and only if you have a Vista "commercial" version, then you can try the phone activation.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• How do I reinstall window Vista Home premium as I am unable to do recovery disk

  How to reinstall window Vista Home premium as I am unable to do recovery disk. When I run the PCRestore file in the Tools directory, it gives error when starting to make the bet into shape. It gives to tools/dp.sc access denied error. I buy the Dell laptop in 2008 and the company has not sent any CD of Vista window with laptop

  Hello

  With a machine Dell to reinstall Vista, you press F8 at startup.

  CTRL + F11 is to reinstall XP.

  See you soon.

• I can't reinstall windows Vista Home Basic Edition to my Compaq presario laptop

  Hello
  I want to format my 'C' drive and reinstall windows Vista Home Basic Edition for my 'compaq presario laptop.
  When I lived with my recovery disk, it has been fine until "loading windows files" and taking me to the recovery / restore point but not with the format options (GUI).

  Hello

  With this HP Compaq recovery process, it's a different process than the installation with the Microsoft DVD

  There is a section slightly more than 1/2 at the bottom of this link from HP showing you how to reinstall Vista using their recovery disks.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#RestoreWithDiscs

  If you have any questions or problems with it, contact HP as it's the HP recovery process.

  Contact HP:

  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1336217096189.876444892.199480143

  Or try the HP's Support Forums:

  http://h30434.www3.HP.com/

  See you soon.

• When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?

  Original title: Msimbz32.dll

  Hello

  When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?
  Best wishes
  Hassan

  Hello
  Try the methods provided below and check if the problem persists.

  Method 1:

  Msimg32.dllis a file system in Windows Vista

  If you get the message when you open any program or when you start suggests that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Perform the clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the above article.

• I reinstalled windows vista went to type the product key in and said it was already in use

  When I reinstalled windows Vista Home Basic and registry said that the product key is already in use

  Hey,.

  On the activation window, click on change product key and enter the same product key that you used for your installation, and then click Update. This will generate a new installation ID. Try to activate by phone with the new installation ID.

• Reinstall Windows Vista without DVD

  I want to reinstall windows vista Ultimate edition, because my PC is running slowly. I have no DVD with the operating system because it was installed when I baught it. I want to delete everything on the PC.
  I have a product key.
  What can I do to solve this problem.
  Thank you.

  I want to reinstall windows vista Ultimate edition, because my PC is running slowly. I have no DVD with the operating system because it was installed when I baught it. I want to delete everything on the PC.
  I have a product key.
  What can I do to solve this problem.
  Thank you.

  Hey stikkan2011

  There is no download online free and legal from vista

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  Walter, the time zone traveller

• I reinstalled windows vista to factory default and during the analysis of the registry errors found 1395 errors

  I reinstalled windows vista to factory default and when parsing registry errors with norton utilities found errors in 1395. what I would do. I have to fix all the mistakes.

  Hi mohdrafi,.

  No need to panic. If you used another registry, cleaner, we could see 2000, 3000 or 4000 even depedning errors that the registry search cleaner. Registry cleaners are so reliable that I wouldn't even recommend them. In fact you don't need a registry cleaner and, contrary to popular reports, your registry "is not" increased cleaning performance. Registry cleaners are noted for the provision of many "false positives" it makes you wonder if the registry cleaner is saying 'what the devil I know, just delete this and the other and hope everything works eventually. My advice? Forget the registry cleaning!

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com