Computer won't start do not after windows update

Similar Questions

• Windows 2008 R2 Services starts do not after windows update

  I have a created .net service (which is independent) that is configured to start automatically, this service does not start automatically after a reboot after connecting to the server of the service taking a (windows update required restart) but once I start. Can someone tell me why this happens?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Presario SR5507F does not start for Vista after "Windows Update"

  One of my friends has a Compaq Presario SR5507F. She is old and doesn't know much about computers. She told me she had a message that an update of Windows was necessary, so she hit 'continue' and walked away. When she came back, the computer was restarted on a screen, she had never seen before: a black screen, with the 'C' and "Compaq" logo in red in the Center, with " and " on the lower left and " and v5.27 ' on the bottom right side.

  I checked to make sure that the keyboard was solidly connected - the NumLock lights etc flash momentarily when the computer starts.

  We have tried pressing ESC, F10 and F11, in various methods: turn on the computer, and then hit the button, turning on the computer using the button is pressed, turn on the computer and repeatedly hit the key, etc.. All had the same result - the screen with the logo of Compaq, and nothing else happens.

  I know that some on computers, but that me stem.

  Of course, she didn't know she should do a set of recovery discs, is not so... she.

  If anyone has any ideas, I'd be happy to hear.

  Hi biolabprof01,

  Sorry to hear about the sentence. There are a number of things to try. First, try the procedure described in this HP support document on Vista won't start do not.

  If you can, try to perform a System Restore or System Recovery.

  If you still cannot start and cannot access the System Recovery Wizard, you can order HP recovery disks (see the section on CD - ROM order page).

  I hope this helps. Let us know how it goes.

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Internet and the printer works do not after windows update

  Windows xp, mcafee internet security

  Recently, I ran a windows update and leave my computer turned off.  When you turn it on, the were (are) of the internet and the printer does not.  I went into Device Manager via Control Panel to see if I could turn them on and there is nothing pulling up in the Device Manager.  All documents and are accessible, but I can't even start a new internet connection and cannot print.   I am currently using another computer (more modern) in another room.  I even tried the SafeMode (f8 in the middle) from the model and go to Device Manager and nothing was there.  I just tried to go through the f8 option and beginning to a previous state that worked and I have the same result...  Everything is saved on that on a 350g portable hard drive.  It would just be easier to wipe the hard drive and start over? If so how would I do this reformatting?  Thanks for any advice.

  Michael

  Hello MikeKloss,

  Before you destroy by formatting the hard drive on your computer, I suggest that you do a restore of the system on the computer by choosing a restore point when it was working fine. You can check the link that will give you information about how to restore the system on the computer below:

  http://support.Microsoft.com/kb/306084

• Windows log answers do not after windows update-7-9-14

  Journal Windows does not respond after a window updated July 9. has anyone else had the problem.

  I think it is the update because I restored the computer before this date and it works fine but again hit update and it still does not work

  I found that uninstalling KB2971850 solves the problem.

  Good luck.

  John

• Skype works do not after Windows update Setup

  Original title: you broke all my messengers with DEP.

  That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
  I thought about this once, of course, I'll do the update and now my Skype will not work.
  I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
  How to operate? It is extremely important that I make it work again soon.

  -Edit-
  I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
  But I got "access denied."

  Original title: you broke all my messengers with DEP.

  That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
  I thought about this once, of course, I'll do the update and now my Skype will not work.
  I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
  How to operate? It is extremely important that I make it work again soon.

  -Edit-
  I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
  But I got "access denied."

  Don't blame Windows updates.
  For all the world claiming fault from Windows updates, there are at least 2 who have had no problems with it.

  It's your computer. Somewhere, the parameters are wrong.

  As to...
  I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
  But I got "access denied."

  When you run the cmd, command prompt, you're supposed to do right click on cmd > click on Run As Administrator > then enter the command in cmd.
  They call this elevated command prompt.

  Did you do that?

• Cannot start Office applications after Windows Update. Clear side-by-Side error caused by the file of damaged

  Windows Update automatically ran yesterday on my Vista 64 Home Premium SP1 system.  Today, I can't run any Office Applications. I get an error popup that says: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »
  I learned how to use Event Viewer and found that a mistake by-side happening and a manifest file has been altered.
  The file is: x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_d08d7bba442a9b36

  Where can I get a clean copy of this file?  It is just a simple XML file.  Do a system restore is not good.

  Hello Astroguy,

  Thank you for your response back!

  Good to know that you have done a repair install.  What I would do is run the SFC scan, because you performed the installation of repair recently the chances are that the SFC scan should be good.  If there is a problem, it will signal you when finished.

  Then I would go to Windows Update to check if he has new updates and/or try to update all those who did not.  If you still get the updates that do not please let us know what he's trying to put up-to-date and error.

  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• USB ports not responding do not after windows update

  After a windows update in March/April 2012 all my usb ports stop working. The single port works now is the SATA USB combo.

  all I have this problem and know how to fix?
  Even a general difficulty just to get ports working again would be greatly appreciated.
  I've exhausted all other patches and now know that it is the windows update that caused the problem, so I'm forced to ask for help here.
  Thanks in advance for your time.

  Which has been updated by windows update is specific to your individual system, and if the USB failed in April you seem to have left ror a long enough period.

  Windows Update > history will show what has been installed.

  In a first time visit your manufacturers of PC and update or reinstall your chipset drivers.

  PS Theres no point mentioning patches unless you specify that you tried

• WIFI connection works do not after Windows Update installation

  Original title: update windows

  My daughter who has just an update running on Windows 8. He wrecked his WiFi connection/settings. His internet now works on the wired only. Is it safe run a system restore?

  Paul,

  Tip: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or updated IE & restart.  If that does not resolve the problem, then try System Restore.

  Restore to before the update was installed check Windows updates and hide the update so it would not automatically reinstall and the program works.

  The time and date of this moment in Washington, United States of America is 16:14

  Tuesday, October 29, 2013
  The time Pacific daylight time (PDT)-0700 UTC

  UTC/GMT is 23:14 Tuesday, October 29, 2013

  Current weather conditions in Seattle

  Just55 ° F / 13 ° C

• My computer won't let me not reinstall windows because he thinks that it is 32-bit and does not recognize the installation discs. Help please?

  My computer has not worked since I stopped him during an automatic update. Which I have been kicking myself since then, but the last time that he updated, he beat the computer and I panicked.

  Anyway, it won't run certain programs, including iTunes and a large part of MS Office, and no matter how many times I try to reinstall, they still do not work, saying: "side by side configuration is incorrect."

  What I want is to restore it to factory settings - all my data is secured and sustained upward. But when I put in my recovery disks (and they are the highest boot priority in the BIOS) the system takes care of the hard drive as usual. When I remove the ability to boot from the hard drive, my system no reserves at all, telling me to restart or insert a suitable disc. And when I boot from the disk and try to run it manually, by clicking ETFSBOOT, it tells me that "the version of this file is not this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program. »

  I have double and triple checked this - my system is 64-bit. My records are 64-bit. As far as I know, the computer got garbled during the automatic update and now part of it think it's 32-bit (some programs are divided into sections 32-bit and 64-bit). All I want to do is to reinstall windows, but I don't know what to do because it does not recognize my discs! Any suggestions, internet?

  Thank you very much.

  In addition, if it is relevant, I'm Windows Vista on an ASUS K50IJ laptop. I do not have the windows install disc because the computer was shipped with windows installed, but I have the recovery disc ASUS (which have been used to restore my computer in the past).

  Hello

  Since you are unable to open programs like iTunes or Office, you can try to perform the system restore and check if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  About the factory restore the question, you need to contact ASUS support for additional help on ASUS recovery disks.

  ASUS support

• won't start does not after a recovery

  My G61-320US... LAPTOP CLOSED JUST BY ITSELF AND I USED IT... WHEN I PUT IT, BUT I HAD AN OPTION OF RECOVERY AND HAS DONE FOR MORE THAN 3 DAYS NOW IT DID NOT START UP AND WHEN I PRESS THE POWER BUTTON IT JUST BLINKS OUNCES AND SHE

  Do a hard reset:

  Disconnect all devices and remove all devices USB and SD cards

  Disconnect the power adapter, remove the battery and then press on and press and hold power for at least 15 seconds.

  Plug the power adapter (but do not insert the battery), press the power button.

  If the computer starts normally, close and reinsert the battery.

  It would be an idea to make the hard drive Diagnostics.

• Application services won't start does not after Oracle Applications 11i Clone

  Hi all
  
  Can someone help me on this...
  
  EBS: 11.5.9
  Database: 9.2.0.3.0
  
  After cloning oracle Application Apache, concurrent managers and other services are in place and works perfectly but my forms and reports services do not come to the top.
  It's show time when I tried to start the services. Please find below
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfrmctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adrepctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmcctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmsctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  Thanks in advance...
  SAI

  AutoConfig succeeded completely without error?

  Please see (adstrtal.sh returns timeout error [331322.1 ID]).

  Thank you
  Hussein

• Network printer not connecting not after Windows update.

  Vista.  Network printer does not connect after an automatic update of windows unknown.  However, requested document printing to a printer wireless unselected, connected to the same network, if the wireless printer is activated.

  Not having received a response to my follow-up question/information, I decided to "Just Do It" on mine.

  I deleted the printer listed as the wireless HP6300 and added back, once again as a network printer.  Not "Uninstall".  (I did on each computer using this printer.  Everything worked perfectly.  Both printers still coexist on the same network and works perfectly.

  As far as I know that something like an update of Windows, change the IP address of the "network printer" at the same IP address as my printer 'Wireless '.  When I deleted and added the HP6300, he returned with the correct IP address.  If anyone has another explanation, I'd be interested to hear.  This problem has also affected two of my friends systems.

  Marcofun

• HP ENVY 13-d008na: HDMI records do not after Windows update 10

  My product number is P0R94EA #ABU

  My laptop auto update installed for Windows 10. All were working well but then restart the external display was not collected more on HDMI.

  Please help urgently.

  Thank you

  Detected and corrected by convenience store HP