Stuck on the white loading without tab screen

Similar Questions

• I tried to download photoshop but its never stuck on the white screen with the loading squares. (MAC)

  I tried to download photoshop but its never stuck on the white screen with the loading squares. (MAC)

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  - and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  - and step by step http://forums.adobe.com/thread/1440508?tstart=0

  Mac https://forums.adobe.com/message/5470608 spinning wheel

• HP w1907: implementation gets stuck to the 'HP invent' blue Boot Screen

  Hi all
  
  I have HP w1907 desktop... I use it since 2008.
  Last month I format to have the new windows 7 in it... Previously I was also working with win7 Ultimate.

  But it's keep restarting after the use of 4-5 minutes and so I installed the entire operating system yet.

  It worked very well... after 3-4 weeks, when I started it, it gets stuck at the 'HP invent' blue Boot Screen.

  This display has the instructions to enter the "Boot Menu", "Setup" and "System Recovery" by pressing key "F11" aor "Esc", "F10".  It is just there for ever.

  If I try to enter the 'Boot' Menu by pressing the 'Esc' key, I get the message "Loading Boot Menu... ", but then it hangs there forever just.  If I try to enter the "Setup" Menu, I get a similar result - it says 'enter the Setup... ". "and just hangs there.  By pressing the "F11" key does not seem to do anything.

  Any ideas on how to solve this problem?

  Searching the forums I tried to reset the BIOS - who I've got from here:

  http://h30434.www3.HP.com/T5/desktop-lockups-freezes-hangs/powering-up-gets-stuck-at-Blue-quot-HP-in...
  
  and
  
  http://support.HP.com/us-en/document/c01080282
  
  After doing this too, the result is null

  Please help me...

  I'm in a hurry...

  Thank you.

  Date and the incorrect time can certainly cause problems.  What happens usually, however, is that the sites Web will not be opened because the State in which the certificate is not up-to-date.  I have not heard of the time and date causing the computer does not start.  I think that you need to change the CMOS battery.  Here's a guide on how to change it.  The guide has also some good troubleshooting information.

  Once the battery has been replaced, we'll see what happens.

• Sansa Fuze stuck on the white screen after disconnecting.

  Once I unplugged my Sansa Fuze on my PS3, it got stuck on a white screen. None of the buttons worked and I couldn't turn it off. I decided that the only thing I could do was to let the battery die and charge it again. Finally, he died and I plugged it in, it loads to full is the same thing. So I tried again, except I only left it plugged in for a while and disconnected. My music has arisen and it seems to work, but it stops immediately by the lack of power. Now no matter what I have plug in, it lights at all. I connected it to my computer and installed the drivers for it, but the rocket itself did not come, and the computer says it has malfunctioned and pilots have not been recognized. So now I can't listen to my music or anything like that. Help?

  Drag the spring-loaded power switch in the highest position for 20-30 seconds. (note that in extreme cases it can sometimes it may take a minute). Release and see if it boots normally.

• Implementation gets stuck to the 'HP invent' blue Boot Screen

  I have a HP Pavilion a6332f desktop PC.

  In Windows, I changed the drive letter of the DVD drive to 'F' to 'Z', and now when I reboot the PC, it gets loaded is stuck on the blue screen 'HP invent '.  This display has the instructions to enter the "Boot Menu", "Setup" and "System Recovery" by pressing key "F11" aor "Esc", "F10".  It is just there for ever.

  If I try to enter the 'Boot' Menu by pressing the 'Esc' key, I get the message "Loading Boot Menu... ", but then it hangs there forever just.  If I try to enter the "Setup" Menu, I get a similar result - it says 'enter the Setup... ". "and just hangs there.  By pressing the "F11" key does not seem to do anything.

  Any ideas on how to solve this problem?

  Thank you

  Dan

  Spawn1155 wrote: I have a similar problem, have a HP pavillion a1101n starts fine, but after running for a while, if for some reason I have stopped (not restart) the pc, it will freeze on the screen hp for about 10 minutes and then turns off on its own. If I wait about an hour and a half, it will start fine. Restart does not have to do this, it happens only when the pc is turned off and you try to turn back before an hour and a half.

  Hello Spawn1155, the problem you describe seems to be more than a heat issue than anything else.

  I checked the specs of your system, which can be found here , and it shows that the system was published in May 2005.

  This indicates that it is a little old system and could very well have a good amount of dust/dirt accumulation in the case.

  I unplug the power cord, remove the side panel and clean the dust/dirt from the inside of the case, paying particular attention to all heatsinh/CPU fan. You can acquire some canned compressed air to clean the radiator/fan to the processor set.

  After cleaning the system, try it for a while and see if that solved the problem. If she did not, you may need to restore the software on the system, due to possible corruption. While I do not think that the syytem has a problem of software corruption, she is always better with a new installation of the software after several years of use, if this has not already been done.

• The Manager of the tasks only displays "complete the process" Panel without tab or click on and can only be closed by right clicking on the icon of cpu in the task bar.

  The Task Manager window shows only the "-l 'CPU usage = end process without tools like usual window Panel' close, reduce or restore and without tab to the rest of the installation." I can't get this Panel click with the right button in the taskbar - Ctrl-Alt-Delete to bring him more. How can I fix the missing parts of the Task Manager window, and which caused them to disappear?

  Double-click the border. (REF KB314227) Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• HP G6 Windows 8.1 sometimes stuck on the start up repair/diagnostic screen

  I have a Pavilion G6 accompanying win 8 and I've updated to 8.1.   Normally, works very well.  But sometimes if it is not stop properly, or after updates, it gets stuck in the rotating balls forever.   Usually after 3 stops forced, I get repair folollowed preparation of the diagnose sceens pc, and then it works when I select restart.    A few times I had to go through the process several times, but so far, it has always started.

  Any suggestions?

  Thank you.

  Some things you could try for now.

  Make a diagnosis via hard drive BIOS

  Restore the default settings of the BIOS

  http://support.HP.com/us-en/document/c02693833

  Run the Memtest86 to test your RAM from there, not the paid version:

  http://www.Memtest86.com/

  Consider changing your CMOS battery.

• BBM stuck to the configuration of opening BBM screen after Dev Alpha updated SDK 10.0.9.1675 gold update

  Just updated to 1675.  Tried to open the BBM and BBM configuration screen flies upwards and the spinner continues to turn for always with the message 'Opening BBM'.

  BBM got working again!

  Go to settings-> Blackberry ID and re-connect with your BBID.  BBM opened again and it associated to your ID Blackberry and everything of fine.

  Thanks to @MyBBOTA on twitter for pointing this origin and retweeting the solution!
  

  Nick

• I am trying to download photoshop in the first instance, but the creative cloud window is stuck on the blue loading wheel, any help?

  When I try to download the creative cloud pop - up opens but just gets stuck on the blue spinning wheel and will not get any more away.

  Mac https://forums.adobe.com/message/5470608 spinning wheel

  -Similar to Windows https://forums.adobe.com/message/5853430

• When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

  Original title: stuck

  When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• U410 won't start - stuck in the Windows loading screen?

  Hi, I have a U410 that no longer starts. Don't know what he did stop. At startup, it loads the startup Lenovo screen, then the loading screen Windows 10 forever (balls chasing each other in a circle). I can't get combinations of keys F bring me to the BIOS. I tried to use the Novo, but not the work of options other than the restoration of the system. They all display the startup Lenovo screen, then the Windows 10 loading screen.

  I created a bootable USB floppy and USB boot, but I never have an option to get the BIOS or choose another Boot device.

  Thanks for the answer, it turns out that it was the hard drive.

  There's something corrupt on it and it wouldn't start. I took and connected to another machine, but he was not recognized by the BIOS or Windows. I returned to the U410 and starts in with the Novo button restore mode. Curiously, it worked and I was able to restore the machine back to original settings and then upgrade to Windwos 10. I lost all data on the HARD drive, but it's normal. She has been saved and most of the records is anyway in the cloud.

  Not trusing stability of this HARD drive, I decided to replace it with a Samsung SSD. It was a great experince. Samsung provides a disk copy utility that works on the HARD drive running! A took about 45 minutes to reflect the existing for the connected SSD HDD. After that, I have swapped drives, ran the optimization of SSD and it was good to go.

  The special tools required for this were opening and pry tools and an USB HARD drive adapter. There are many videos on YouTube that show how to open the laptop.

• HP Pavilion stuck on the white screen

  He had since November/December, Windows 8, it kept freezing so I restarted. It showed 'Prepare auto repair', then went to a blank screen (help I need before the 4th) and it has been like this for a day

  Hello

  The info is good and which would indicate This is your laptop.

  The error code for the short drive Self Test would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  As your laptop should still be under warranty, contact HP and arrange for the replaced disk - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Windows Vista does not start. The BIOS loads then black screen with blinking cursor.

  So my friend told me that his PC was not working. When you press the power button on the pc, the screen of the Dell BIOS load but instead of starting then Vista it shows just a black screen with a blinking cursor. Still, the BIOS detects the hard drive and has the ability to boot from it, but it just that again. I tried the recovery disk windows, and when you click on the "Repair" option when it loaded usually shows a list of the operating systems installed and their hard drives. There is no listed on the Vista recovery cd. Manually, you can browse and find the partition from the OS than its sequel, and clearly see the windows directories. It all simply not start, nor let the recovery disk to fix it because the operating system is not detected. I plugged the hard drive on my pc with the same results. Then I started my Win 7 and Explorer, disks and partitions are once again still visible with the appropriate directories. Windows says the drive is working properly and has no file system errors. When viewing in the hardware Manager, he says it's healthy (primary, active partition). My hard drive working correctly says healthy (boot, pagefile, primary partition). Why used it boot and why the recovery disk not recognize the operating system and how can I fix it or do I need to format and reinstall vista?

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

• Blue pages in all the white areas of my screen. Helllllppppppppp!

  everything on the screen that should be white blue/aqua-what is includes sign under windows. I have windows 7 Compaq Presario CQ56 and tried various things tofix, including problems of display quality. The exsist only problem in the screen area, the toolbars are white, but the areas where you can type are in blue/turquoise even on my videos, everything that needs to be white is feeling blue/aqua sort of as the computer is in 16-bit mode, and I have a 64 bit system. Please help me solve this problem

  I have the same problem - do you have it fixed?

  I have found that if you go to color management and adjust the Green slider blue sparkles off the coast and you can save it to that, but you end up with a few small red dots here and there. It does not completely solve the problem, but it does not make the computer usable.
  I think that the problem is in the graphics card/driver somewhere

• Help! My computer is stuck on the resume loader page

  My computer is a hp 1740 it is a computer given to me as a gift, a used of a member of the family, but I tried to connect a keyboard (also a hp make keyboard) and he said that the last attempt to resume the system from its previous location once again attempt?
  
  Use the arrow keys to highlight your choice
  Delete restoration data and proceed to system boot menu... But the only thing is the keyboard is not responding or working or not the mouse and I tried everything to do work he did not move and I looked everywhere for the answer but can't find there please help me that would mean assign!

  According to the error message you posted, I suspect that there could be a hardware problem on your laptop

  It is possible that the hard drive on the laptop might be corrupted or it might have bad sectors

  Please follow the steps as shown below:--

  1. Please 'disable' the laptop

  2. "power ON" the laptop and keep typing the escape key when leaving upward to access the Start Menu

  3. now, here, please select as well in advance or the diagnosis tab option [F10]

  4. you should find the possibility to run tests on the hard drive and memory

  Note: Please perform these tests and post back with any error message details

  Please click on the link below to find the steps involved in running a hard drive Test

  http://support.HP.com/us-en/document/c00439024

  http://support.HP.com/us-en/document/c01443317

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP