stuck on waiting for approval ' for sale '.

Similar Questions

• Recently I connect to the net via hspa(3g) on windows 8 and try to download the apps store but stuck at 0% and if stucks to waiting for a break.

  I installed the Windows 8 32-bit operating system on my laptop.

  Recently I connect to the net via hspa(3g) on windows 8 and try to download the apps store but stuck at 0% and if stucks to waiting for a break.
  updates are available, when I install the updates, repeatedly paused at any time.
  I left it for download for hours, to no avail.
  I would like to say that my windows is activated and my laptop have win8 and double windows win7.
  I found the result in microsoft technical support by restarting the update through cmd, but in its service also not worked.
  Please help me in this topic, there are lots of apps in the store that I want to download but can not download.
  Please help................................................................
  Thanks in advance
  Original title: Apps are not download

  Hi imran,.

  I solve my problem of the post of the same problem. There is the correct method, i.e.
  By pressing win + w, then typing troubleshooting and choosing the troubleshooting in the windows updates.
  Then he fix something and fix my problem.
  Thnak you for taking interest in my problem.

• iMessage is stuck at waiting for Activation.

  Hello

  I have iPhone 6 Plus with iMessage stuck waiting for activation. May that what's wrong with it? These are the work with other vendors if I insert the sim card. Is it something to do with the question SMS relay or something else?

  Need help to solve my problem.

  Thanks in advance.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• VRA 7 Installation Wizard stuck on "Waiting for host Trigger Prerequisite Check"

  I'm trying to use the vRA Installation Wizard 7 and continues to stop on this control with this message: "Waiting for host Trigger Check condition" - it will stay there for hours without doing anything.  Any ideas?  I tried to add a manual entry in the hosts to the IAAS system file.  Any other ideas?

  Maybe a stupid question, but you have installed on the servers IaaS management agents?

  Grant

• Mobile Lightroom. Stuck with "Waiting for Connection".

  Mobile of Lightroom cannot synchronize because "waiting for connection" status. Was working fine before. Also cannot synchronize with LR Mobile in the Collections switches - they used to work very well.  What's Adobe up? Need a fix.

  Problem fixed (maybe).  I disconnected LR-Mobile on iPad, then logged on. Initially, it looked like LR - M in lost iPad. Then I closed the application and reopened. All the images previously synchronized and collections are back. Then I opened LR on my iMac and to my surprise, the "waiting for connection" had disappeared. It was replaced by "sync 22 photos. Of course, all seems good now. Don't know if this will work for everyone, but fingers crossed it stays fixed.

• Out of blackBerry Smartphones SMS messages "stuck" with waiting for tag.

  "Stuck" messages in (effectively) Outbox; they do not erase.

  They are sitting with "little clock" icon (pending).  What is a BBB problem or my provider?

  Anyone experienced this?

  Thanks for any comments.

  Reset the device, the device turns on, remove the battery for 30 seconds and reinstall it again.

  Let me know

• Version approved but can't post for sale

  I have sent several messages to the provider to support, but have yet to receive an answer.
  Version 2.0 of "Dual Cam Photo" my application has been approved, but I don't see a link to "post for sale.
  I had a previous version that was not approved, and the only link I see in managing products is 'Send for review' which I think is related to the CPL(a) version.

  Please help me solve this problem and after the app for sale as soon as POSSIBLE.

  I don't like on the previous version (1.8) and it would be great if that could be removed, but the main issue I'm trying to solve is to display the approved Release 2.0 for sale. It is a free application... I want people just to be able to download and use!

  

  I managed to solve the problem after guess what needs to be done by reading other posts with similar questions, so here's a quick summary of how to fix things if you are in the same situation:
  -I have re-released the preliminary version (the version that was not approved)
  -I looked into "Change request tickets" for the new note that was created for re-presentation.
  -I added a note (copy - paste this same post explaining my problem)

  Within an hour, my new application was rejected again, and my trusted application was "posted for sale!

  

• App approved, still not available for sale

  I checked at random my supplier portal in the hope that some of my portathon apps have been reviewed and I noticed something weird today.

  For my apps that I submitted again to the Community (which were initially denied), press section, they show that all human beings approved. The previous version shows declined, new version approved shows, and nothing does not appear under review.

  However, the application itself is not listed as being available for sale, and it is not this little button next to it that says: "Put up for sale", or something like that. He said also 1 CR is considered, whereas emissions show nothing under consideration.

  Am I missing a setting somewhere or looking at it wrong?

  I had exactly the same case with one of my apps. I solved it in Amsterdam, stand BlackBerryWorld (I explained everything than the guy from BB and it fix in two minutes). I guess you need to explain your problem to support BBWorld.

• When you surface you sales to Singapore and when can I buy surface to Singapore? I already waited for a long time

  RESTful salvation, surface was already on sale in the United States, China and some countries, but it is not on sale in Singapore. When you surface you sales to Singapore and when can I buy surface to Singapore? I already waited for a long time

  Hello

  Thanks for posting the question in the Microsoft Community! If I understand correctly you want to buy Surface to Singapore.

  Unfortunately, Surface is not available in this area right now. I suggest you check out the link for the Microsoft Singapore Web site for updates:

  http://www.Microsoft.com/en-SG/default.aspx

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

  Thank you.

• Help with a frozen window. Adobe CC application installation is stuck at 2% for more than an hour. What could be my problems and I can't get out or should I wait?

  I opened Adobe Creative Cloud installation Center and he asked me to update. What does that mean? And then I pressed the update, and it's been sitting at 2% for one hour now with no sign of progress. Is it possible to restart that process, because there is no getting out acess. I keep close the CC and when I open it again, it is still at 2%. I'm not yet of any recommnedations online.

  I have a perfect home reception, so this isn't the problem. I have AI, Id, Lr, Pr, Fl, Ps and DW installed on my computer, but now I need to Encoder Adobe CC and I'm stuck waiting for the application Adobe CC for the installation of these stop smoking gel on me. Any help?

  Thank you. Rachel.

  Rachel, what version of operating system do you use? Try the below mentioned steps and let us know if it works.

  1. close the creative process Cloud (cloud of Creative, coresync)

  • End a process - Windows help
  • Activity Monitor: Stop a process

  2. remove the cloud creative app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  3. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  Waiting for your response.

  Atul_Saini

• Stuck "waiting for the printer to be available."

  After initially looking at it's going to print, the printer dialog box displays "waiting for printer to be available" and it's there (even if the printer - inkjet HP series C3800 - is ready).

  Here is what I tried:

  Using the HP utility software on the same computer, I am able to successfully print a test page, which rules out a problem with the printer and its connection to the computer.

  Printing worked normally before moving on to the Sierra. I tried resetting the printing system and add new printer (Sierra recognizes very well). I also tried to run in case disk utility have a permissions problem.

  I'm stumped at this point. Help much appreciated.

  Same story, but with a HP Laserjet P3005dn, specific scenario, the exact symptoms, exact attempts to improve...

• Start stuck on "Please wait for the Local Session Manager."

  I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

  Had no problems to start in safe mode. Looked up various ways of addressing the problem.

  Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

  Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

  Ran check on memory. No problem either.

  Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

  I looked in the event viewer to see what came that time and a couple mistakes were:

  Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

  Event ID 7026: the next (s) start or start failed to load system
  spldr
  Wanarpv6

  It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

  Hello

  1. by chance your computer is connected to a domain environment?

  2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

  If you did not disable these services make sure you disable and then check if it works.
  See the article below for more information.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• GSS stuck "waiting for configuration data.

  One of my clients have 2 GSS 4900 running ver 4.1 (1)

  I can't get the ESG service works properly in a secondary gssm running. Gssm service looks like it starts but if I check "gss status" och "Show System State" that it is awaiting configuration data

  MNT - GSS - 002.nt.se #show - system status

  Standby GSS - 4.1 (1) GSSM - Cisco [Mar 12 Nov 16:10:21 UTC 2013]

  Recorded in primary GSSM: 10.16.0.15

  Component waiting for data routing configuration (wait a minute). [runmode = 3]

  START THE SERVER

  16:01 Config agent (crdirector)

  16:01 Config Server (crm)

  16:01 Database

  16:01 GUI Server (tomcat)

  16:01, Node Manager

  16:01 webserver (apache)

  Ping works fine between the GSS: are and there is no firewall involved (both are located on the same ip subnet).

  I did stop gss and then start gss. Waited for 24 hours, but the situation is the same.

  If I'm running tcpdump on the secondary, I see TCP traffic and UDP between the primary and the secondary, although all UDP packets have a warning of incorrect checksum.

  I have no idea on how to t-shoot, that. Should I do gss disable, remove this gss of the primary gssm and enable gss again in the secondary?

  Notice to lovers?

  Hello

  There seems to be a communication problem. You can do the following and see if the GSS is going to runmode = 5.

  On the standby: gss stop gss disable Then, go into the GUI of the GSSM and delete the standby GSS from the resources tab Then go to standby: gss enable gssm-standby x.x.x.x (IP of primary )
  
  Then in the GUI of primary GSSM, you will again see the standby in the resources tab. Click on it, and check on the activate button, then hit submit. Make sure the standby goes to runmode 5 under "gss status" output.
  If this doesn't work then you can try the below:
  Go to the GUI of the GSSM and delete the standby GSS from the resources tab. On the standby: gss stop restore-factory-defaults Make sure you have a console connection so you can do the initial config on the Standby GSS (add IP, etc). Once done, enter standby:
  
  gss enable gssm-standby x.x.x.x Then in the GUI of primary GSSM, you will again see the standby in the  resources tab.
  Click on it, and check on the activate button, then hit submit. Make sure the standby goes to runmode 5.
  
  Kind regards
  Kanwal
  		   

• My Adobe CC application on windows 8.1 tries to download updates for Indesign, Dreamweaver and Flash, but it is stuck on "waiting" indefinitely. How can I solve this problem and start downloads, updates?

  My Creative Cloud Deskop on Windows 8.1 application gets stuck on "waiting" when you try to update applications. Please help me understand how to get the download to start.

  I have a Gigabyte P27.
  8.1 Windows 64-bit

  and a full subscription of CC with Creative Cloud Desktop application as well (this is where I will have questions)

  All my installed applications work fine. I'm enrolled correctly and synchronization also works very well.

  -Very well, so after a lot of trouble trying to open Photoshop CC, go to help and updates it. This has opened a different kind of Application Manager, and when I invited to be updated, my UAC Windows asked the permission of the administrator and I said OK.

  The files are now all the manual update. I'll fix the permissions in the OOBE folder, then remove the "run as Administrator" box of the update. Maybe it will work. I'm going to come back here to confirm that where someone always ends up this question.

• Supplier Portal: cannot send for sale

  I recently added a new application on the portal to the seller and he submitted to the review. For some strange reason, it was denied because the application icon did not work (this worked for me, so don't know what the problem was).

  Then I tried to download the new files for versions, but it did not work, because of the name of the version (this is my first trial / pay & purchase app). The problem, it was something like 'version name must be greater than another version.

  If I was not able to save the new bundles for the version and the trial version. To this end, I created new versions and they had approved tonight.

  Now the problem is: I can't post app for sale because the old man refused releases is the submit-for-abduction-queue and I have no idea how to remove them.

  In the change request history I have a "Waiting on test house" element for older versions the only thing I can do is submit the 'old' for review

  Someone at - it had a similar problem and knows how to remove this waiting on test house, even if they are not submitted and will never be?

  Developers are not able to remove entries in the App World. When you give it a try & buy, you can increment the version number only for the 2 versions. But the trial version must be greater than the paid version or the users will probably get the paid version when they try to get the trial version. Apparently App World does not seem fully the 'trial' box/flag to determine which file to download BAR.

  Thus, for example:
  Version 1.5.0 must be
  1.5.0.100 for paid
  1.5.0.101 test
  (the build number can be anything, 100 series to illustrate that it is an index of construction and not a major.minor.patch version.

  You might want to this post in the App World forum for App World developers will see it and help out you.