Cisco C60 3 cameras + speaker cable

Similar Questions

• camera / computer cable for PowerShot A1100 IS

  need to reeplacement camera / computer cable for PowerShot A1100 IS - no available on the Canon Web site - do not offer Office Depot where I bought the camera

  Hi watson1943!

  Thanks for posting!

  The specific cable supplied with your camera is currently unavailable on our website.  However, the cable is a standard type of cable that can be found almost everywhere.  Both an end has enlarged type connector and the other end has a mini type B connector, it should work.  You can try one of your local electronics retailers to see if they have such a cable in stock.

  It has not responded to your question or problem? Find more help contact us.

• Tripartite Cisco C60 or C90 Cisco Conference

  Dear Experts,

  Cisco C60 or C90 of Cisco, codecs that have key MultiSite option allows to display image on screens separate the multipoint Conference, for example to display each participant on a screen connected to the codec during three separate?

  Your prompt response is much appreciated.

  Kind regards

  Nick

  Yes, you must use the composting and the TC console features. See attached link...

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC6/tc_console/codec-c-series_tc-console_tc60.PDF

• Overheating of Cisco SX80 double camera

  We have a SX80 Cisco codec with dual cams installed at the front of the room who the speaker / auto track feature. This room was originally installed about 1 year ago. And just recently, I started to notice some flickering with capture our video cameras in the room of the VTC. In addition, the Auto Track feature pans and zooms to an individual speaker during a video call no longer works and manual tabs on the touch screen to control the cameras are inoperable as well.

  At this 1st, it was just the flickering I noticed and I simply unplugged feeding on both cams for a little to solve this problem. However, a week later... twinkling is back, but now came the problem with the Auto Track and manual controls for each input. After power to the Assembly of the whole camera to mount on the front of the room for about 30 minutes, it seems to solve the problem. But now again once this morning the Auto track does not work and the emission of heat from the base that the cameras are on is very hot.

  I've determined that the power that feeds on the Assembly of the camera at the front of the room is separated BC from the system of room in other words, when you stop AV system of the room through the touch screen, it is always power supplied to the Assembly of the camera with a separate. What has power constantly running on the cams, making them HOT.

  Has anyone else had this problem with the Assembly Speaker SX80 track? And if yes, what is the resolution other than intermittently, turning them off the coast from time to time. I know that this device is relatively new, so wonder if the circuit design within the frame of the Assembly of the camera is shotty and needs reworking.

  Thanks in advance!

  Check out this link. It explains your problem

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCuu06180

• C20 QuickSet camera Extension Cable

  Hi - did someone knows if it is possible to extend the length of the camera on a quick set C20 cable please?

  I wonder if it is possible in a manner similar to the MXP used solution of extension cables 3 x 6, 5 m more power... as well as a HDMI cable block extended, so maybe?

  Kind regards
  Richard

  I do not know the length, but the PrecisionHDMC camera Guide may contain requirements.  I know that HDMI has a maximum length, although I don't know if the cable has a VISCA since it's just power/control.  You could also connect to independent power of the camera, so all you have to focus on command.  The guide also contains the pinout you are looking for as well.

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/camera/precisionhd/user_guide/precisionhd_1080p-720p_camera_user_guide.PDF

• Built in speaker does not work when I pull the external speaker cable

  I have 2 speakers system and external speaker. My external speaker are out of order, so I pull his cable system but now built in speakers are also not working. Volum icon shows with cross and no speakerphone and headset available. Any solution

  Hello
  When you said "pull the cables" do you mean deleted the connection to the motherboard / sound?
  1. make sure that each connection is connected.
  2 reinstall the audio drivers.

  Click on Start , then Control Panel

  Select the material and audio and noise
  Under playback.. What icons you see?
  Click Properties and then click headset/speakers
  According to the levels... is at 100% and not CUT?
  Under Advanced... What is the default format?
  Click test... do you get a sound?

  b Eddie

• the camera usb cable will not relay photo to computer

  Help, please

  I can't download photos from my camera or phone using the usb cable.

  Please email and tell me what to do.

  Thank you

  Jan

  See if this thread helps,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/why-cant-i-import-pictures-from-my-camera-or/9e72901b-47d2-48A2-807a-a08c724e1162

• How to extend your horizontal field of vision for Cisco TelePresence PrecisionHDMC camera

  Hello

  We use the camera PrecisionHDMC of Cisco TelePresence, but we want to expand the horizontal field of vision?

  Do what van?

  Kind regards

  Martin

  Hello Martin

  Telepresence PrecisionHDMC camera comes with the fixed maximum VISION field, depends on the model you have.

  Please visit this link:

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11307/ps11335/data_sheet_c78-669051.PDF

  Thank you

  Rafal

• Failed to add the key to unlocking a Cisco C60

  The codec has been upgraded to TC 6.2.1 and it keeps giving an error-

  CRITICISM:

  Valid unlock key

  Key missing for TC6.2.1.69d401c release. The system will not be able to make all the calls. Please Add a unlock key valid.

  When I add the key to liberation, it is said

  Added unlock key.

  A

  reset

  It takes to the unlock key is taken into account.

  I rebooted the device and I did it a couple of times already, but he came back with the first error - no release key.

  any ideas?

  Lavanaya-

  I looked at your serial number (https://cisco.com/go/license) and noticed that the software is TCNC, which as described Martin does not support encryption.  You can check which version of the software you downloaded to the codec, you can check by going to the maintenance > Software Upgrade on the web interface of codec.  You should see something like the following: software version is TC6.3.0.3d8e7d1.  You can also look on the codec itself if you have direct access to the information system.

• C90 Cisco with 7 cameras - chaining

  Hello

  We have installed a codec C90 Cisco in a large training room using 7 1080 HD Precision cameras chaining.

  You have a document on how to configure the C90 with Garland of 7 cameras guides on how to operate the cameras for example spend 1 camera to another and how to use the remote control.

  Thank you very much for the help.

  Hello

  You can use document about Garland of camera and limitation here

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/camera/PR...

  Search for Garland

  About commissioning, whenever you want to use any camera make sure to have it as a main video for the codec, the second thing that must be supported is the remote control should be close to the camera to have adequate control.

  You must of course remote control IR response should come from desired camera, if cameras are close to each other, make sure to set the remote control DIP switch.

  Will you keep the fixed camera position or he has to move, if it is necessary to go you will rely on the remote control or any third party controller?

  Thank you

• Codec C90 Cisco with Mulitple camera

  Hello

  I'm having a problem with the secondary camera is discovered on C90 codec (v7.0.2), two of the camera is connected and HDMI1, HDMI2.

  IAM get selfview main camera only. The two camera is connected in chains and able to control.

  Is there any configuration required to activate the secondary camera of the codec to display free.

  The camera is precision 1080 12 X.

  TNX

  Bobby.

  You can change the source of the main camera using one of the following options:

  The remote control of the menu (don't remember the exact location).

  The web interface, and on the page of call control, the configuration page of the system in the video options.

  The serial port or SSH, you can issue commands directly on the codec to change the camera to help source xConfiguration Video MainVideoSource .

  Don't forget Wayne said, you can have a single camera selected at any time, therefore, you will see whatever the camera is selected as the primary source, unless you use Console TC composite multiple cameras in a single stream to display on the screen.

  https://developer.Cisco.com/site/collaboration/Telepresence/AV-Integrator/tools/TC-console/TC-console.GSP

• Implementation of Cisco C60 for a test site

  Hi all

  I have two C60 codecs, sitting on the same network (not provisioned, not set up for video conferencing).

  Could someone please explain how to set up these two codecs for a VTC test site? I found a few sites testing, IPs, etc, but I don't know what to Setup. The advanced on the device configuration page is not very helpful.

  These two devices can call the each other without some sort of setup of service? I'm fairly new to this area, so I really appreciate your help on this.

  Thank you

  Sinan

  Hello

  First ping the end this codec the codec you use for membership and see if you get resonce.

  SystemTools network ping xxx.xxx.xxx.xxx

  If you have found answer then use suite commnad ro dial.

  xcommand Dial Number: xxx.xxx.xxx.xxx Protocol: h323

  HTH

  Kind regards

  Dharmmesh

• Cisco Module SFR HA speaking

  I will implement a Sourcefire solution over the next few weeks and I am familiar with the installation process on a single module. However, I will be installing the module on a pair of active / standby. Each will be framed or installation of SFR need is the own unique IP address? I guess Yes since Firesight will have to separately manage to maintain duplicate, but wanted to check it's the case.

  Yes - separate management addresses. They are separate devices in the center of FireSIGHT, each requiring its own licenses.

  We usually put them in a group of devices in FireSIGHT for ease of management. Alone, they don't know about the other and don't share any configuration or flow.

• How to extend HDMI on Cisco TV presence Codec C60 camera cable

  Hello everyone.

  I need to know how we can extend the camera HDMI cable and the control of camera d-SUB/RJ45 cable up to 50 m.

  We know that HDMI cab be extended to aid commercial Extender HDMI, but we do not know if the C60 uses standard HDMI signal. and what about the control cable. ?

  C60.PNG

  

  You can use any standard HDMI extender to extend HDMI video cable.

  For camera control cable, you can make your own cable from camera to extend existing or just cable one as long as you need. See the camera cable pinout scheme in the PrecisionHDMC camera Guide on pg 17. If the camera cable is more than 5 meters, the unit must be plugged into a power supply for camera (PSU-CAM-V =), as the time is too long for the codec to power the camera.

• C40 Camera control maximum length of cable RJ45 to d - SUB

  Hello

  What is the maximum cable length for the control of camera on a Cisco C40 port?

  Thank you

  Kyle

  According to the PrecisionHDMC camera Guide, page 17, the camera cables that usually come with codecs can be 5, 6.5, or up to 20 meters.  Anything more than 5 meters requires the camera powered by the power of the camera and not the codec using the camera control cable itself.

  I have a few installs custom where the camera control cable is well up to 75-100 feet.  Just follow the outputs pins on the same page as above to make your own cable and don't forget to use the POWER-CAM-V = power supply to power the device.