Studio EQL erased when pointing to a different data field
Hello
I have this scenario with regard to the studio. The studio application has been set initially at DataDomain1. Then I put it in DataDomain2. Yet once, when I put the return of DataDomain1 none of the reports work!... It seems that all the EQL is erased and the configuration of the components is not retained. May I know the reason for this behavior. Is there a cure for keep an underlying the field of data even when application configuration settings is changed to a different area of data? Help you enjoy.
Thank you
Anusha
That's exactly my point. If the two data areas are totally different from each other, where is the value in preserving the configuration? All components would not need to reconfigure?
For example, let's say I have a configured component of guided Navigation to view the 5 groups of attributes. Then, I want to pass the application that contains this component to point to a completely different data domain that does not have one of these groups of attributes (because, as you say, the two data areas are totally different). What is the expected behavior? I now have all of this configuration pointing to 5 groups of attributes that do not exist. The configuration is totally disabled.
Same would go for a chart bound to a view (example: 'Sales') with a bunch of parameters related to it based on some attributes. If the data areas are totally different (as you said), the view would exist even in this new area of data? Probably not, but let's say it was the case. Are the same attributes? They all do they exist? What are their types? By saying that the two data fields are totally different, you seem to indicate that the attributes would be totally different. So even if the table had retained its configuration, the configuration would be totally useless and not valid?
Now, there might be a portlet out there (say, a bar of Metrics) where the configuration is not valid but "fixable" (maybe?). However, for the most part, you're views of design and configuration of the components for a data set. When the underlying data is completely changed, the default behavior should be to keep around invalid configuration or slate?
Note that if you want to change the data source connections in a given application (for example, I was bound to a Data Source that was limited to a few 'Sales' and I also wanted to include "Customers"), this feature is present in Application settings > connections to Data Source (with an option to keep the configuration). However, I don't think that's what you're asking, and not what is intended by changing in the world of the field of data for an application.
hope that helps.
Patrick
Tags: Business Intelligence
Similar Questions
-
Data source with 2 different data fields
Hi all
I have data of the file that has 2 fields of different data that belongs to 2 different members of the account dimension.
I can load by using a rules file?
My rule file is not validated with 2 data fields.
Please guide
Thank youTo clarify a bit the post John, you would not define the columns 'Data' but rather to do the real accounts column header that you want to load in. It is a case where the title is not the name of dimension, but rather members in the dimension. (Note that I use the expression column, but the term is in the field)
-
Mouse pointer disappears at different locations on a page
Original title: mouse pointer
My mouse pointer disappears at different locations on a page. For example if there is a box to insert information in, I can't say if the pointer is in the place where the information is to be inserted.
Hi Johnny33,
1. you are using a laptop?
2. using a Bluetooth mouse or wireless?
3. This only happens on a particular program?
4. When did you start to question?
5. you will remember to make changes to the computer before this problem?
You can try the following steps and check.
a. Click Start and in search for, type mouse.
b. click on mouse under programs.
c. click on the pointers tab, click game box and choose (none). Uncheck the Enable pointer shadow box.
d. click the pointer Options tab, click View trails pointer area, then move the cursor on the court. Click OK
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Hello
I have installed:
-(Oracle Linux) OL 6.6
121 GB HD
5.0 GB RAM
-JDK-7u80-EA-bin-b05-Linux-x64-20_jan_2015.tar.gz (Java)
-Fmw_12.1.3.0.0_infrastructure.jar (infrastructure)
-Fmw_12.1.3.0.0_ohs_linux64.bin (SST)
I try to install OBIEE, I unzip these files:
-bi_linux_x86_111170_64_disk1_1of2.zip
-bi_linux_x86_111170_64_disk1_2of2.zip
-bi_linux_x86_111170_64_disk2_1of2.zip
-bi_linux_x86_111170_64_disk2_2of2.zip
-bi_linux_x86_111170_64_disk3.zip
I run/home/oracle/OBIEE/Disk1/runInslaller and open the screen to select the oraInventory directory, when I click OK, the error message appears (see image below):
[oracle@localhost Disk1] $. / runInstaller
Iniciando Universal Oracle install...
Espaço Verificando Temp: deve ser superior a 1536 MB. Passado Reais 36602 MB
Verificando swap Espaço: deve ser superior a 500 MB. Passado Reais 2553 MB
Verificando monitor: deve ser configurado para exibir pelo menos 256 cores. Reais 16777216 Passado
2nd para iniciar o Oracle Universal Installer from/tmp/OraInstall2015-09-13_08-13-50 h Aguarde... [oracle@localhost Disk1] $ 13/09 / 2015 20:13:53 oracle.as.install.bi.util.ConsumerUIProperties getCustomPropertiesFilename
INFO: Using a custom UI properties of the oracle/as/install/bi/config/consumer-ui.properties file
[ERROR]: error initializing log values
oracle.as.install.engine.exception.LogInitializeException: Espaço insuficiente para criar os log archives na Localização address para o inventario. Espaço shouts ob o inventario especificado/home/oracle/oraInventory UO aponte para outro inventario
to oracle.as.install.engine.logging.EngineLogHelper. < init > (EngineLogHelper.java:65)
at oracle.as.install.engine.logging.EngineLogHelper.initialize(EngineLogHelper.java:192)
to oracle.as.install.engine.InstallEngine. < init > (InstallEngine.java:135)
to oracle.as.install.engine.InstallEngine. < clinit > (InstallEngine.java:130)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:603)
In English:
oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory
What can be?
Well, you very probably not a lot of space on the left under/Home.
You can move to another location that is located on/home/oracle/orInventory the / partitioning of the partition where you probably have more space left if you used the default value.
For example, as a root user:
mkdir/U01
MV/home/oracle/oraInventory/U01
Update /etc/oraInst.loc and replace
inventory_loc = / home/oracle/oraInventory
with
inventory_loc = / u01/oraInventory
-
How to reconfigure FDM apps to point to a different Oracle repository?
Hi all
We are in the middle of the relocation of a number of databases Oracle metadata. I wonder how to reconfigure FDM apps to point to a different database server?
As far as I know, the only place to set up the database of the FDM app goes to is when you create the application. I don't see any setting in Configuration, integration, or Application settings, which stores the name of the database server.
I know that you can change the configuration of the application by choosing to add an Application to the login screen and change the details of the application, but it only allows you to change the name of the Service and not the name of the database if its going from Oracle for Oracle. If I change to SQL server it allows me to specify the name of the server, but of course, this isn't what I want.
Does anyone know how to do this?
Thank you!Don't know how to do this with Oracle. I think you need to change your tnsnames.ora or sqlnet.ora files to point to the different server, but I don't know what else would have to change. The Guide of DBA FDM may have the info you are looking for.
-
A field validation can point to a different record type fields?
Validation of field based on another field of registration Type
I am trying to generate a validation in a custom object that summarizes the fields under the record type account.
The names of the fields of OBI (the location and the name of the table field):
"- Take into account the custom settings. S_INT_13 + ""-account of custom settings '. " S_INT_14 + ""-account of custom settings '. " S_INT_11
My questions: peut a field validation, point to a different record type fields? My thought was that if OBI can look in all of the types of records that all CRM must be able, including field validations.
Thank you
DavidHello!
I'm afraid that's not possible at the moment. You will have to wait for version 16, I think that having such opportunities.
The R16 will allow you to create a workflow through different types of records (for example, to create a task on the account related to the service request when a new service request is created). I hope that there will be equal opportunities with the validation rules...Hope this will help, do not hesitate to ask for more.
Max
-
For Apple Watch, can someone please show me how to change the time on my watch when I travel to another country, like London or Singapore? Thank you.
Hello
When traveling to a different time zone, it is not necessary to manually change the time on Apple Watch.
After turning off the flight on each of your iPhone and Apple Watch, the time on your watch can be updated automatically to reflect the local time.
If it is not the case, try restarting your watch:
-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.
-To reactivate: press and hold the side button until you see the Apple logo.
-
ORIGINAL TITLE: I use Windows xp.
I use Windows xp. In Windows Explorer. A dated file say 12/02/2000. When you click the folder, the files in the folder bear different date. Why is it so. To update the files, we should see the dates of the files instead of the dates of the folder. right? Why is there such a difference?
My copy of Windows XP works the same as yours. Apparently the date folder is not updated when the content is, that fact make some sense as the folder itself is not updated when new content is created in the it.
-
How can I restore my computer to an earlier date when the guest continues to show only the same date as the malfunction? I use Windows Vista on a Toshiba Satellite laptop.
Hi bmikelg48,
How many restore points that you have? You see an option to view the restore points more? Are all the restore points after the start of the question? You cannot restore your computer to an earlier date if you do not have a restore point to an earlier date.
You can find the troubleshooting steps in thisthread useful:
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
User account now points to a different user account files
Several users have in our household have accounts on a laptop. One of the accounts mysteriously began to point to a different user account files. All other user accounts seem to work normally.
UAC is not running on the machine. The user account with the problem and that to which it points now have administrator privileges. Windows Update is active. The 2 latest updates prior to the issuance have been updated to Windows defender.
How to restore this user account to the way it was?
Hey Super,
It is possible that the location of each of the user data folder are changed to the other user account.
First check if the user account folders do not exist in the C:\drive\users and then continue with the steps below.
You will need to each user account folder redirected to its original location and check if it works.
1 right click on the folder that you want to restore to its original location, and then click Properties.
2. click on the location tab, click restore default, and then click OK.You will need to do this for each individual user account folder that points to the other user account folders.
Redirect a folder to a new location
http://Windows.Microsoft.com/en-us/Windows-Vista/redirect-a-folder-to-a-new-locationIf the previous step fails while the user account may be damaged, you will need to check if the problem persists in a new user account and later to fix a corrupted user account.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-accountDifficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileI hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
enlarge desktop icons when pointed at by the cursor?
as the title suggests, I was wondering how to look bigger when pointed at by the cursor on the desktop icons?
Hi paulene bianca lorilla,.
Thanks for posting your query in the Microsoft Community. According to the description of the problem you want to enlarge desktop icons when pointed to by the cursor.
I'll help you with this problem. Unfortunately, this is not possible.
However, you can consult this article for more information.
Show, hide, or resize desktop icons
I hope this helps. Let us know if you need help with Windows.
-
. Files NEF (Nikon D600) in Camera Raw (Adobe CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good. There is no update available.
As it appears in Camera Raw
Exported
In Bridge, open camera raw preferences and uncheck the option of graphics processor at the bottom of the dialog box.
-
I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3? using DreamWeaver CC
Among the contributors here has a nice page explaining how to do what you want, using css.
Indicator of persisting in the Menus - Page http://alt-web.com/
-
Problem with managed server by pointing to a different JDK
Hello
My Adminserver is pointed to JDK 1.7 which is shown in the start, but my managed servers point to a different 1.6_43. We are running Java version mismatch problem while deploying our application created with jdk 1.7 on these managed servers. How can I change the version of my managed server?
Thank you
Sam
Hi Sam,
You usually only have to change it in two places.
DOMAIN_HOME/bin/setDomainEnv.sh and MW_HOME/wlserver_12.1/common/bin/commEnv.sh
See the examples below.
If you are on Linux, you can address it quickly. For example:
cd /u01/app/oracle/product/fmw find . -type f -exec sed -i "s/\/u01\/app\/oracle\/product\/jdk1.6.0_39/\/u01\/app\/oracle\/product\/java_current/g" {} \;
It's a good idea to do a softlink to your installation of Java, so you will not have this problem in the future. If you are on Windows, you can use a symlink.
Linux example:
ln -s /u01/app/oracle/product/jdk1.7.0_25 /u01/app/oracle/product/java_current
Example of Windows:
mklink /d D:\oracle\product\java_current D:\oracle\product\jrockit-jdk1.6.0_26-R28.1.4-4.0.1
setDomainEnv.sh
/u01/app/oracle/domains/eksudv/bin/setDomainEnv.sh if [ "${JAVA_VENDOR}" = "Oracle" ] ; then JAVA_HOME="${BEA_JAVA_HOME}" export JAVA_HOME else if [ "${JAVA_VENDOR}" = "Sun" ] ; then JAVA_HOME="${SUN_JAVA_HOME}" export JAVA_HOME else JAVA_VENDOR="Sun" export JAVA_VENDOR JAVA_HOME="/u01/app/oracle/product/java_current" export JAVA_HOME fi fi
commEnv.sh
/u01/app/oracle/product/fmw/wlserver_12.1/common/bin/commEnv.sh # Reset JAVA_HOME, JAVA_VENDOR and PRODUCTION_MODE unless JAVA_HOME # and JAVA_VENDOR are pre-defined. if [ -z "${JAVA_HOME}" -o -z "${JAVA_VENDOR}" ]; then # Set up JAVA HOME JAVA_HOME="/u01/app/oracle/product/java_current" # Set up JAVA VENDOR, possible values are #Oracle, HP, IBM, Sun ... JAVA_VENDOR=Sun # PRODUCTION_MODE, default to the development mode PRODUCTION_MODE="" fi
What about Peter
-
ITEM_INSTANCE when handling WHEN-POINT-CUSTOM-EVENT in a block of several record?
I want to manage the trigger WHEN-POINT-CUSTOM-EVENT of a Bean in a block of several record. The PROPERTY_CHANGED_EVENT doesn't give me that the name of the property that has changed in the parameter of DATA [1], apparently expected to make a later FBEAN. GET_PROPERTY to discover the current value [2].
However, how does my trigger know that ITEM_INSTANCE be read?
I use 10g R2 for development.// how do I find 'instanceWhichCausedTriggerToFire' ?! FBean.Get_Property('myBeanArea', instanceWhichCausedTriggerToFire, myPropertyName);
Thanks for sorting out my confusion!
David Bullock
--
[1] [working with Data Type and events encoders | http://www.oracle.com/webapps/online-help/forms/10g/state/content/navId.3/navSetId._/vtTopicFile.enhancedjavabean | enjbs_workwithencoders ~ html /]
[2] Grr...Hello
As second instance element built-in parameter, you can use the Get_Block_Property ('block_name', CURRENT_RECORD)
François
Maybe you are looking for
-
I take a class any web business, and I can't find a lot of the functions that they speak.
-
iTunes does not correctly synchronized music
Very well if this started when my father was add music on his iPhone as he usually does, and it was drag / drop the music of his library to his phone to add. Then for some reason, some of the music has been removed from his phone - but not completely
-
Pavilion PC 40f d61: uninstall based anti-malware and Business Contact Manager
I'm trying to upgrade Windows Vista Home Premium to Windows 10, and I got the message saying that the upgrade has been canceled and 10 Winhdows Setup could not continue because I first need to uninstall the following programs: professionals and Anri-
-
How to recover the DVD drive after Windows XP Service Pack 1 upgrade on protected M200
I lost my DVD Multi writer after update WInXP SP1 on my M200 Tablet of protégé. Restarting ElbyCheck reported a conflict with v3.00189 drag ' n Drop. I chose (foolishly) to solve it. The situation is pretty much as described in FAQ ref: TRO0000001bf9
-
Cannot install Zoo Tycoon 2 under win 7
I'm having a problem where I can't even the game to install on my new win7 Pc. I start the installation process and I get the message via the installer: Setup cannot install files system or update shared files, if the files are in use. Before you con