Stupid question: enum to export to CSV?

Similar Questions

• Several properties of the vm to export to CSV

  I am trying to query the properties of many virtual machines and placed them in a csv file. Thanks RvdNieuwendijk, I have a simple means to recover some of the properties, as described below.

  
  $VMs = "vm1', 'vm2', 'vm3.

  {foreach ($i in $vms)
  Get - VM $i | `
  Select-Object - property name,
  @{N = 'DNS Name'; E={$_. ExtensionData.Guest.HostName}},
  PowerState, numCPU MemoryMB, Version.
  ID, ProvisionedSpaceGB, UsedSpaceGB, $vmhost.
  @{N = "ToolsVersion"; E={$_. ExtensionData.Config.Tools.ToolsVersion}},
  @{N = "ToolsStatus"; E={$_. ExtensionData.Guest.ToolsStatus}} | `
  Export-Csv - NoTypeInformation - UseCulture-path E:\scripts\$i.csv
  }

  However when I use the cmdlet export-csv file contains an entry for the latest vm. So my question is how I export to CSV so that each virtual machine is on its own line in the file even with no headers?

  Hello, sas23-

  You were pretty close.  The key was to make the Export-CSV call outside the foreach loop, as:

  $VMs = "vm1", "vm2", "vm3"&{foreach ($i in $VMs) {    Get-VM $i | Select-Object -Property Name,        @{N="DNS Name";E={$_.ExtensionData.Guest.HostName}},        PowerState,numCPU,MemoryMB,Version,        Id,ProvisionedSpaceGB,UsedSpaceGB,VMHost,        @{N="ToolsVersion";E={$_.ExtensionData.Config.Tools.ToolsVersion}},        @{N="ToolsStatus";E={$_.ExtensionData.Guest.ToolsStatus}}}} | Export-Csv -NoTypeInformation -UseCulture -Path E:\scripts\VMsInfo.csv
  

  or, to cut a few lines, you can move the names of virtual machine directly to Get-VM, since the names are not used elsewhere in the script.  Which would look like:

  (Get-VM "vm1", "vm2", "vm3" | Select-Object -Property Name,    @{N="DNS Name";E={$_.ExtensionData.Guest.HostName}},    PowerState,numCPU,MemoryMB,Version,    Id,ProvisionedSpaceGB,UsedSpaceGB,VMHost,    @{N="ToolsVersion";E={$_.ExtensionData.Config.Tools.ToolsVersion}},    @{N="ToolsStatus";E={$_.ExtensionData.Guest.ToolsStatus}}) | Export-Csv -NoTypeInformation -UseCulture -Path E:\scripts\VMsInfo.csv
  

  Both ways should translate into a single CSV file with a line of header information and three 3 lines of info from the VM.  You don't say: "no header", but I took this to mean that you didn't want a header for each VM to info line, no is not that you didn't no whether header.

  Enjoy

• Stupid question about compatibility

  I would be happy to search the forum for inDesign to discssions on compatibility with other editions, but it seems that it is impossible. Where this stupid question.

  Problem: a uniform translation ends me back-saved files in InDesign CS, which I created originally, but I can't open them.

  This that I have to spend $500 on an upgrade so I can open it or is there a way they can back - save it so I can open it?

  Thank you

  I think that I get it now. I doubt that the files have been saved as files InDesign CS. As I said before, it is impossible to back - save as InDesign files. Only InDesign X can save to a file, InDesign X. very probably, the provider is you open files in a later version of InDesign and save as native file of this version, InDesign 4, 5 or 6, you cannot open.

  You have three options:

  1. You are upgrading InDesign to be compatible with the version of the provider.
  2. Only translated text files, then you replace the text in your files.
  3. Having the export INX since InDesign 4 provider. If they use later to edit it can be a loss of hassle and risks of formatting.

• Export to CSV problem...

  Hello
  
  I have a problem, hope I have explained it well.
  First of all, I have all report (SQL query) region with a silmple select (SELECT col1, col2 from table1).
  
  In this selection, I select the column which is a varchar2, a table.
  In some cases, the values in the column is for example 3-3' 2-2 "or 1-1'... etc.
  
  So I implements the integrated Apex for the export of data to CSV format:-report attributes-> export-> output CSV report activate: YES, Link label: export to CSV.
  
  When I click on the link 'Export to CSV', APEX exports to CSV and run my local excel to open this CSV... well...
  
  Well, the problem is that when I look in excel, he interpreted values such as: 2 Feb or March 3 or 1. Jan and so on... This is not true, of course.
  
  
  My question:
  Is it possible to get data excel for this column in a table, it is...
  Instead mar 3. I need to 3-3,... etc.
  
  
  Thank you very much...
  Zlatko

  Zlatko,

  I use this technique often to display zeros on the digital data defined as varchar2.

  Encode your column varchar2 like that and to preserve its format when exporting:

  SELECT "=" "| your_tbl.your_col | ' ' ' 'Date ' ' ' '.
  Of your_tbl

  In addition, you will need to select your date/varchar2 column twice in your SQL. Once the way you have it now and a second time as above. Then the report of two columns should be conditionally displayed, your old method on the report and the new method on your export.

  Under conditional display in the attributes column, place a Type of Condition of PL/SQL Expression of:
  INSTR (NVL(:REQUEST,'YABBADABBADO'), 'EXCEL') = 0
  INSTR (NVL(:REQUEST,'YABBADABBADO'), 'EXCEL')! = 0

  The first condition is your column of report and the latter is for your column of export.

  Jeff

• Yes, that was a stupid question

  Yes. It was a stupid question. Serial number written on the bottom of the computor. Yes. I have it. DOH!

  Although it would be useful for Apple to include this info in the topic How to find section...?

  Still unresolved problem but it seems to be a non-accessible boot drive.

  Reserved it in for bypass surgery, so we're getting there.

  Apple has done an article on how to find a serial number:

  https://support.Apple.com/en-us/HT201665

  Fighting yourself.  You're not the first and won't be the last to have such a problem.

  If yo chooses to provide more details about the difficulties with your MBP, maybe others can help you solve them.

  Ciao.

• Stupid question: why tinytots (and other similar fonts) will not work in Firefox?

  I am a user of Tumblr, if of course if I had to work on a theme, I would like to see the fonts that I have chosen to serve. In Chrome, everything seems as it should usually (relative to the fonts). In Firefox, I respond specifically to these two browsers so my theme seems not completely horrible. In my opinion, only a browsing experience more could be made if Firefox showed fonts such as tinytots for more than just me, but for someone else who is perhaps not brave enough to post about it. This brings me to another question: I'm just ranting or is it possible I can see these fonts and not know about it?

  This isn't a stupid question.

  Google Chrome has its own library of fonts.
  
  Mozilla Firefox runs Windows fonts library.

  To run on Firefox fonts, they must be installed on Windows and then Firefox must be restarted.

  Sometimes, Web sites do not use the correct font name and the police is found, even if it is installed.
  
  A good website designer would design a Web site with backup for users to load fonts if they do not have the installed font.

• Stupid question, I know, but after years of use of Firefox, on this one I can not find the icon of reloading the Page? Help, please.

  In the past, when I refresh a page, I just went to page reload icon in the toolbar. On the new version, I can't have the icon charge. Sorry I know this is a very stupid question, but I can't find that reload icon. The toolbar is very different from previous versions, but I don't know tht pesky icon should be here somewhere!

  Firefox 4 and later versions use a combined Stop/Reload/Go button that is placed at the right end of the address bar.
  
  During the process of loading page it shows as a stop button and once the charging button is replaced by a reload button.
  
  If you type in the address bar this button would then become a button go.
  
  Click the Reload button to duplicate the current tab in a new tab.

• SSRS 2012 export to CSV with no data by generating coma separated with an empty value

  I have a report that have no data due to parameter motor (both have true noheader configuration).

  In SSRS 2005 its generate empty csv file and for SSRS 2012 his record still generate with coma and an empty value, something like this:

  ,,,,

  Those that were generated by Server (SSRS 2005 and 2012 SSRS), tnot different heres in the rsreportserver.config file to make segment.

  If I exported the csv file to SQL Server Data Tools for Visual Studio 2012, it generated an empty file (which is correct).

  Anything I missed here?

  Just realized, its due to my 2012 SSRS is the RTM version and its due to SSRS bugs has been fixed on SP2 + CU3

  https://support.Microsoft.com/en-us/KB/3002049

• REALLY stupid question about virtual machines and disks of cancellations.

  I'm a bit hesitant to ask this question because it might make me look stupid, but...

  When I'm done using Virtual PC and a virtual machine running Windows XP Pro with Vista 64 Home Premium because the host os, often I did not any significant changes to the hard disk of the virtual machine.

  What I save gets saved to a network share on my server for files and printing from Win98 and saved on a flash drive.

  Assuming that I do no configuration changes or anything else I want to keep, is there a reason barely stopping properly when I 'cancellations discs' enabled?

  Any reason, I can not save time by pressing the 'X' button and choose 'disable and remove changes '?

  I am aware of patches, but took me to inform me of the patches, and I can get patches when it's convenient for me and I always validate changes when I install the patches. I'm not using it for anything other than my classes of the school of the evening for the time being, so it is not much of a value of protection on the virtual machine, and I used to write papers on the host operating system. I just use the virtual machine to play with the admin tools in an environment where I can easily fix it a massive screw-up without spending hours to reinstall Windows.

  Hey SlickRCBD,.

  Not a stupid question at all! :)

  It's very well hit the X when you have activated the disks of cancellations. And corruption or problems with the active virtual machine will be resolved when using the drive to cancel it.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• stupid question about UAC

  OK, it's a REALLY stupid question about UAC.

  I have several icons on my desktop. Some of them are games that must be run as administrator in XP compatibility mode.

  I rarely accidentally tried to open the icon, particularly if you use the keyboard to choose what I want.

  Is there a reason if I accidentally open a game that pushes me in height DO NOT hit 'Cancel' if I didn't intend to play the game at the moment, but trying to open something else? Something like a process being left in suspense, memory leaks, or any other reason why I can't Abort to launch the application to the UAC prompt?

  Hey, Slick,

  Clicking Cancel will prevent the running total process if you do not have to worry about the still ongoing services for memory leaks or game, etc..
  I hope this helps.

• Overall summary of environmental export to CSV (Free Edition)

  2 request free editions & other versions:

  1 Free Edition could would export info 'summary of global environment. file csv tab Explorer environment?

  2. Annex export these CSV files to the email and the UNC path

  Hi, Edward - you can do both of these points with the full paid version of Foglight for virtualization Standard Edition. If you click the upgrade option, it will allow the full functionality for 30 days. You can also download the full version here - http://www.quest.com/foglight-for-virtualization-standard-edition/

  Let me know if you need more info - thanks Danny

• Digital networks... Maybe a stupid Question

  I have three updated servers in place currently in my lab. One is 3.3.4 Call Manager called EV. I have two other servers, the two 4.0.3/EX2000 unity. One is called AA and the other is called EVVOIP which is connected to the EV Call Manager. Two unity servers are in the same domain/AD Forest, but different Exchange servers. I configured the search options, options for addressing etc.. I have also configured a dial in EVVOIP area, and there have been replicated to AA, so I could select it. I did the reg also hack. When I use a telephone connected to the CM and go in the EVVOIP unit, I hit the ' * ' key to access the main menu. I select '4' to join the fate of directory name. I can get the names of the local server on EVVOIP, but when I try to retrieve the names of AA, it returns nothing.

  Here is the stupid question. Do I need to have an another call manager to the top and connected also to the AA unity server running? I'm not trying to transfer a call, just try to search for names. I can't join the names from the store of the AA unit.

  Thank you.

  Yes, it is certainly a factor.

  The choice of name list manager will never offer a username to a caller outside that does not have a name of the recorded voice. For subscribers addressing messages, these users are, of course, available, but they are checked with their extension number (no doubt if an external caller knew their extension number they would have composed it).

  If you need to record the names of a few votes for users before they will appear in the list manager of choice of name for external callers.

• Very stupid question of blackBerry Smartphones A

  I'm sorry to bother you with what I am certain is a very stupid question.  I promise you that I am in fact quite irritable, but this very simple thing has running me around in circles for more than an hour now.  I went through all the videos of tech support that I can find and I can't find one online anywhere to solve what is surely a simple problem.

  I bought a Curve 8310 this morning and is to sign up through Straight Talk.

  Unfortunately, the #& * ^ @ thing won't let me accept the contract of Blackberry Solution license.  No matter what I do, it keeps taking me back to the agreement.  I tried:

  1. enter everything right.

  2 prescription until "I agree" is in white (leaving "I do not accept" in blue)

  3 space limitation until the "I agree" is blue (leaving "I do not accept" white)

  4 space requirement until the two "I agree" and "I do not accept" are white.

  In these four cases, when I lorsque je tape hit enter, it brings back me to the license agreement. There is no other options given.

  It's obviously culture of the box, because I couldn't any changes made to the settings if I wanted to. How to proceed?

  Try doing a battery pull. Let it reboot and see if the problem is still their. If the problem is still their after restarting, I think you should try to get a replacement.

• BlackBerry Smartphones has BB for less than 24 hours... some (stupid) questions!

  Hi all

  I looked through some tips and read the summary instructions (at best) that came with my BB and now have a few questions, if that's ok:

  1. I downloaded the "favorite" of Facebook, but I don't know where that is?  I thought this would be an icon, I could then add to the home screen?  If it IS, then how can I find and to do this?

  2. is it possible to add my iTunes Catalog, or a part of it, to my BB - are compatible somehow?

  3. how to choose something other than the horrible Vodafone home page, to be my homepage on the internet?

  5. What is the difference between "browser" icon and the icon "WAP"?  Am I meant to go through one preference to another, because in the end, they both make the same thing?

  6 represents the number of pins only to give BB 'friends', so we can chat on messenger, or there are homonyms?

  Again, sorry for the stupid question; I'm really proud of the implementation so far without any help from the husband, but having my llimitations, lol - it's a world apart form the Nokias I've owned exclusively for the past 13 years... but I think I love her!

  Thank you

  L x

  1. I don't know about a 'bookmark', unless you try to bookmark a place in your web browser? You can download and install the Facebook for BlackBerry application.

  Use the browser of your BlackBerry to access www.blackberry.com/facebook

  2. Yes, use of BlackBerry MediaSync software...

  http://NA.BlackBerry.com/eng/services/media/mediasync.jsp

  iTunes with DRM will not transfer, DRM coding should be removed first of all files.

  3. open the browser to the page that you are going to choose as your home page, and then press the Menu key > Options > browser Configuration > scroll down > address Home Page > use current Page

  5. I would like to use the browser icon. WAP icon uses the data of your service provider's WAP service.

  6. the PIN identifies your device to the network and is, so to speak, "Digital ID" in your devide.

  And Yes, your use of the primary AXIS will invite friends with BlackBerrys chatter on BBMessenger.

  You would benefit from reading and practice of 9700 (very similar) my friend Mr. Stinsonddog PIL.
  Look at this link for them, download and print the PDF file and practice the tips using your device. You will be amazed at all the cool things that your BlackBerry can do.
  http://www.Stinsonddog.com/

• APEX 5.0 Export to CSV produces duplicate records

  Good day to you all:

  I use APEX 5.0, and I have a classic report that has a total number of lines of 274.  (274 documents also in SQL Developer).  However, when I export the report to CSV, duplicate records are produced and the total number of lines increases to 365.  Has anyone already known this before bug in APEX 5.0?  I tried to reproduce the report to a type of interactive, but I get the same results when you export to CSV.  Advice or guidance would be appreciated.  Thank you.

  Aqua

  Hey Aqua,

  If you are APEX 5.0.0 or 5.0.1? And which version of the database, you are on?

  There was a problem with CLOB (which are used for the download) in 5.0.0 running on specific versions of 11 GR 2. A fix is included in the 5.0.1 patch set.

  Concerning

  Patrick