Sublayout to dynamically update running

Similar Questions

• I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).

  I have a new HP computer and I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).  When you try to open an attachment, the bar downstairs quickly moves to the right, but never appears a dialog box asking if you want to open or save the file.  Error message I get when I try to resolve it with the suggested steps indicates "module"wintrust.dll"was loaded but the call to DllRegisterServer failed with error code 0x80070005.  I tried to do the same command prompt, but still not received the same error.  Thanks for help anything.

  Hi Paul,.

  Have you tried to download an attachment after you turn off your antivirus?
  I had a problem in the past where the system was performed at Trend Micro Internet Security and Web content filtering (I think that's what it was called) was preventing attachments from download.
  I would like to know what are your results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update running long after the system restore Image

  This is my 2nd try at why put Windows runs so long.

  I did everything that was asked of me in my 1st post.

  My last answer a question for me was on 19 September 2016.

  Which was a Monday.
  Then silence. I don't know if anyone can help with this problem.

  It is still ongoing.

  But at least informed me that it is not something that can be done.

  Instead of silence.
  The links below are to my OneDrive. Please let me know if there is more information.

  Operating systems: Windows 7 Ultimate sp1 64-bit

  Recently I reinstalled Windows 7 with a system image backup.

  He took my computer the initial installation of Windows 7.

  When I checked for updates that need to be installed in the Windows Update control panel there are not.
  So I clicked Check For Updates.

  Rental search automatically updates, run first for 3 hours. Once again for 8 hours. Then once more for 20 hours.
  Each control time for updates still worked and no updates have been downloaded for installation.

  How can I get updates for my computer, if check for updates is not download any?

  Sheilah

  systemlog

  SystemInfo

  Try the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• Windows Update runs for a long time without finding update

  Separated from this thread.

  Hi men, I have a similar problem with update of windows 7.

  Windows Update runs long without finding updated and do not stop running.

  on the "windows Update" Panel, Windows shows no research update and no updates installed, while all are displayed on the history until the KB915597 on 21/06/2015

  I found on the web a lot of posts on this problem, but without finding a solution so far.

  On top the English is not my native language, that's why I'll be very interested if anyone, old or young to help me.

  Thank you in advance

  The application, system and information link system event log

  https://onedrive.live.com/redir?RESID=87673FD27CD1A063! 106 & authkey =! Diego-Uum6lCv4 & ithint = % 2ctxt

  Thank you Patrick for the update. Your message arrived while I was on vacation and it appeared just after your last post.

• Update for Windows 8 3 hours for 1 update running

  Original title: upgrading from windows running 3 gours

  Windows Update for windows 8 3 hours for 1 update running.

  Message says pc will restart in 1 day at the end of the important updates.

  Can't stop computer at all. Is this normal, don't have not had this problem before.

  Thank you.

  Thanks for your help.

  I wasn't able to get any information that you have requested. My Tablet has just shown the installation

  update message and another message that the tablet should be restarted the next day.

  Emilie! The next day, the tablet started up properly.

  If you can tell me where I can watch the update of windows in window 8, I'll get the information for you.

  Thank you for following up on this issue.

• Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Dear all,

  I tried to do a procedure that will search for a group of approval in our database that matches.

  (1) the number of levels

  (2) the number of users by each level

  (3) the id of users by level

  entered by the user.

  I tried various methods to receive user input dynamically at run time, but in vain.

  Finally finished my procedure allowing the user to enter the parameters and then executes the procedure, to which these parameters are passed as arguments. (1 variable for the number of levels and 2 userdefinedarrays with the number of users by level and level respectively)

  Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Thanks in advance,

  Séverine Suresh

  HEY, Sebastian,

  3035408 wrote:

  Hello Sir,

  My question is that if I'm going to say, the number of levels 5, is there any way by which, at runtime, the procedure prompts me to enter at the start of the number of users per level. Now as soon as I get the number of users per level can I do the procedure ask me to enter the nicknames of the members of each level. I mean, something like a invite.

  Thank you

  Séverine Suresh

  There is no way to do it in SQL or PL/SQL, because not SQL PL/SQL is a way to get user input.  User interaction is a job for your front end, like Zlatko tool suggested in response to #5.  If your front end tool is SQL * Plus, you can use the substtitution variables, as Jarkko showed in response #6.

• Dynamic update of Web parts

  Hello

  I would like to know if it is possible to dynamically update the Web fields.

  For example:

  If the user clicks on the button '+ 1', the 'value' field will become = "value" + 1

  If the user clicks on the button '-1' the field 'value' will become = 'value' - 1

  Thanks in advance,

  Geert

  No guides on this subject and don't know any specific sites that do. I just do it if necessary.

  You just need to two buttons and increment or decrement the input value onClick.

  As a not jQuery's javascript

• How dynamically update the role of oracle using the trigger

  How dynamically update the role of oracle using the trigger:
  
  I have svmanger owner of schema in the database. There are five tables belonged to svmanager.
  
  Table A, B, C, D, E.
  
  I have a role that is played only to these tables under the scheme: SVMANAGER_READ_ONLY
  
  now, if I create a new table F under svmanager. the role that svmanager_read_only does not work is updated, so the user had assigned role cannot access table F.
  
  is there a way to create the trigger for this role dynamically update any when a table is created or deleted?
  
  Thank you.

  I really really really don't suggest to do this - it's a bad habit. If possible I'd just adding the grant as part of the steps to the role on the new creation of the table.
  But for fun here's how you can accomplish this:

  create or replace procedure execute_grant(v_ddl in varchar2)
  is
  begin
     execute immediate v_ddl;
  end;
  /
  

  create or replace trigger catch_create_table_trg after create on schema
  DECLARE
  
  ddl_job number;
  ddl_str varchar2(50);
  begin
     IF ora_dict_obj_type = 'TABLE' THEN
  
         ddl_str := 'GRANT SELECT ON '||ora_dict_obj_owner||'.'||ora_dict_obj_name||' TO SVMANAGER_READ_ONLY';
  
         dbms_job.submit(job => ddl_job,
         what => 'execute_grant(''' || ddl_str || ''');',
         next_date => sysdate+(5/24/60/60));
  
     END IF;
  end;
  /
  

  Test it

  create table F (id number(1));
  

  Validate

  select * from ROLE_TAB_PRIVS where ROLE = 'SVMANAGER_READ_ONLY';
  

• Set the name of server report dynamically at run time

  Hi guru,.
  
  I called reports of the forms that I hardcode the name of report server in my code.
  Is there no alternative to set the server name of report dynamically at run time, is how to find the name of the report server and that in through my code as a parameter.
  
  
  can you give some examples of codes... Thank you

  One way that we usually followed before was to store the name of the report server in other tables in the database, then choose this name whenever we want to run a report.

  In this way, it is easy even if there is no change in the name of the server.

• First try the producer consumer Architecture: continuous play and dynamically update settings.

  Hello

  I am currently working with two instruments; an Agilent E3646A and a NI 6212 BNC. My goal is to have the 6212 continuously take measures according to predefined parameters while the E3646A parameters can be continuously updated. This combination simple instrument aims to help me learn the manual architecture; continuous measurement, output dynamic controls and instruments more will be added in the future.

  I've already posted on a similar, but more complicated configuration (http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Split-second-lag-when-controlling-two-instrum... and was advised to try the producer consumer Architecture.) I found the documentation on the website (http://www.ni.com/white-paper/3023/en/, https://decibel.ni.com/content/docs/DOC-2431), searched the forums and built my own VI. While my first attempt at a producer consumer Architecture has solved some of the problems I had when I posted on the subject, however, new questions have been raised regarding the reading and adoption of the VI.

  I am currently able to run the VI and update the settings on the device. Previously, I'd get a freeze while the instrument has been updated and could not switch settings until it was done. This has been resolved, although that reading updates only when a parameter has been updated, although it is outside the structure of the event. In addition, the Stop button does not in any context. I also got occasional mistakes on the part of Deqeue, but the major part of the sentence is error-200279 'A tried to read samples that are no longer available' to DAQmx Read. I realize that there is a problem in my loop of producer but have not been able to find a way to solve it.

  This is my first attempt at a producer consumer Architecture and already I can see that it is a powerful tool. I read as much as I could and looked at examples, but should have some problems at the beginning. Would be very grateful of any advice so I can take full advantage of the architecture.

  Hope to hear from you,

  Yusif Nurizade

  You're going to overflow this buffer, unless the events are generated faster than "sample rate/number of samples.   Period.  Nothing could be simpler.

  You don't need a local to stop your curls.

  Try something like this attachment.  I simply moved the structure of the event in its own loop dedicated since it had nothing to do with acquiring data at all.

  Data acquisition loop stops very well when you destroy the task and destrying the stops of power queue (sending the default values of the queue for the power control) for EXAMPLE, to ADD a group of setting 'Safe shutdown' to a 'package' and it wire to the Center terminal (Prototype).

• Tabular with dynamic update DB

  I have a tabular layout with column of a status which is a LOV. When you click on the different statuses, it changes the color data and background.

  To update the changes in the DB, you must click on the "SUBMIT" button.

  I would like to kick off the DB update dynamically when changes color. Nothing I've tried so far is updating the DB. Is there a way to do this?

  There are a few ways to do this, but they will take certain amount of Javascript.

  You use a dynamic action to change the color?

  If so, look at the action "run the Code in PL/SQL.  It allows you to run PL/SQL in the background as an AJAX request, which is exactly what you described.

  The trickiest part about this is the form of tables. Before you can run the Code in PL/SQL ", you will need to enter the values for the form of table, you need to save and place them on hidden items that are not protected. Then the PL/SQL code can refer to these elements as bind variables. Make sure that you list the point on the field "Page to go".

  If you do not use DA, you can always do this with javascript apex.server.proess call.  Search for a few examples.

  Post your progress and help you along.

  Thank you

  -Jorge

• List of parameters of popup dynamically update

  Hello

  my plugin has two settings of the pop-up window where the list of the second depends on the first selection. These two parameters are not saved, but rather an arbitrary set invisible.

  During loading of the project, PF_Cmd_UPDATE_PARAMS_UI is called, reads the arbitrary setting, and sets the selections on two popup settings. To do this, the list of the second popup is changed dynamically. This is done by using a copy of the param and definition of a new list, for example:

  PF_ParamDef param = *params[PARAM_LIST];
  param.u.pd.num_choices = 2;
  param.u.pd.u.namesptr = "a|b";
  param.u.pd.value = 1;
  
  AEGP_SuiteHandler handler(in_data->pica_basicP);
  ERR(handler.ParamUtilsSuite3()->PF_UpdateParamUI(in_data->effect_ref, PARAM_LIST, &param));
  

  When the application runs, everything works much matter how many times the values in the list are changed. But when I left after effects, it crashes with

  After Effects(20523,0x7fff7707f000) malloc: *** error for object 0x1211d6b94: pointer being freed was not allocated
  *** set a breakpoint in malloc_error_break to debug
  Signal: SIGABRT (signal SIGABRT)
  

  On page 53, the SDK guide warns of a

  Only cosmetic changes can be made in response to this command. Do not change the values of the parameters while responding to the PF_Cmd_UPDATE_PARAMS_UI; do during the PF_Cmd_USER_CHANGED_PARAM instead.

  but I don't see where I can update any other list control.

  It is even possible to change the contents of the parameter in the list without crashing after effects at the end?

  I now have a working solution.

  Since my old code already worked, but crashed the application at the end, I took the recommendation "you cannot change the number, but the names." It sounded pretty strange to me because the namesptr is a const char * and replace "a |" b' with ' apples | Orange"already looks like I'll write in memory who does not belong to this channel.

  To remedy this, I changed my solution:

  -PF_Cmd_PARAMS_SETUP fills a sequence of bytes with "(-|".) 4096 " Unnecessary separators are hidden by sequelae, but apparently it takes internally the 4096 bytes (or more?).

  -PF_Cmd_UPDATE_PARAMS_UI now has the byte sequence known to fill and is even able to change the number of num_choices:

  PF_ParamDef param = * params [PARAM_LIST];

  Param.u.PD.num_choices = 2;

  PF_STRCPY ((char*) param.u.pd.u.namesptr, "a |") b | c... ») ;

  Param.u.PD.Value = 1;

  AEGP_SuiteHandler Manager (in_data-> pica_basicP);

  ERR (Manager. ParamUtilsSuite3()-> PF_UpdateParamUI (in_data-> effect_ref, PARAM_LIST, & param));

  No crashes so far, I can only hope that this method does not hurt after effects without my knowledge

• Dynamic update does not

  Hello Experts
  
  I have a text box and a list of selection. As soon as the user enters a value in the text box, the select list must update based on the value that was entered in the text box. I have a request in the select list that selects from a table where the value = value text box.
  
  To achieve this I created a dynamic refresh on the text box while he refresh her select the list as soon as focus is no longer, but whenever I run the page, a refresh icon appears next to the selection list but it seems to refresh forever and nothing is filled in the select list. If I send the page, then the list is full, but I don't want to send the page but want to raise the value of the text box and refresh selection list.
  
  Any help on this is appreciated.
  
  Thank you

  You can avoid this by using LOV cascade. Specify the name of the Cascading LOV Parent article text element under the section of list of values of the select list item.
  And use this element in the select query in the selection list.
  It should solve the problem.

  See you soon,.
  Mehabub

• Updated, runs in background but the browser will not open

  Firefox automatically updated today, and I restarted the browser. Or at least tried to. the process runs in the background, but the browser itself will not open at all. I am running Windows 7, and it seems, in the bar of windows, as if its going to open, but it's fading. When I went to uninstall it said that it was still running. Stopped the process, uninstalled and reinstalled, but the same problem. Cannot use troubleshooting tasks because I can't in the browser at all!

  Is currently working with a secondary browser, which is fine, but I really want to back Firefox!

  cerulean1 wrote:

  Can't use any of the troubleshooting tasks because I can't get into the browser at all!
  

  Firefox does not start safe mode?

  1. Click round Windows logo in the taskbar to bring up the Start Menu.
  2. In the search box, type firefox.exe - safe-mode and press ENTER.
  3. If small Firefox Safe Mode window opens, click the start Safe Mode button.
  4. For more details, see the problems to troubleshoot Firefox in Safe Mode

  If Firefox does not start safe mode, start the Profile Manager? If so, create a new profile and try to start Firefox in this profile.

  • Use the Profile Manager to create and delete profiles Firefox

• Screen is not updated running Webex

  I use firefox 22 and using Webex One-Click on the desktop

  Everything works fine and I am able to view sharing very well, but when I share my screen that I will meet a number of problems of editing screen.

  Drop-down menus on any website will not work.

       When clicking on a drop down menu, often you will see a border or outline of where box would be but no selections are available.  After waiting for ~10 seconds the selections become visible.
  

  When I stop screen sharing is frozen white and I need to put an end to firefox and restart.

  I'm not using the webex for firefox plugin, and firefox is the only browser in this case. IE, Chrome, both work fine. This happens on
  2 personal laptops both running windows 7 64
  1 laptop running Windows 7 32

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.