Submit and reset in oracle reports Viewer buttons

Similar Questions

• SUBMIT and reset the url

  Hello

  I have a submit button which refeshes my page.

  However when I click on my channel url remains the same and don't revert back to start - what is my setting for this?

  < do the action = "" method = "post" target = "_self" > "

  blah blah

  < input name = "submit" value = "submit" type = "submit" / >
  < / make >

  If my url is index.php? name = Sam when I click on Submit there is index.php? name = Samand my recordset picks up back again.

  I need to go back to

  index.php when I click on the button "submit".

  Any ideas please?

  S

  If my url is index.php? name = Sam when I click on Submit there index.php? name = Sam and my choice of Recordset back to the top.

  I need to go back to

  index.php when I click on the button "submit".

  change

  action=""
  

  TO

  action="index.php"
  

• Two variables need to be set and reset as two different buttons are pressed

  How to define variables and reset the variables when different buttons (one at a time). They go to the same page, but their actions are taken based on the setting of variables.
  
  Examples or suggestions will be highly appreciated.

  keep going to the page as hidden. Pass a value to this hidden point. Based on the hidden item, the button appears.
  For example if: Pn_X = 1 display button1 if: Pn_2 = 2 display button2. Pass the value to Pn_x, you have your own conventional logic
  Another example on the use: I do not have a process button and create the Bill once I clicked and dealt with the Bill, I put the element hidden under another value. Immediately, print the invoice button will appear, and the process button disappeared. Once printing is complete, this key will also have disappeared and create a Bill button will appear. and this cycle

• Oracle Smart View 11.1.2.5.400 prompt bug still not fixed?

  Hello

  in our company we have 11.1.1.7.140715 OBIEE and we test Oracle Smart View 11.1.2.5.400 (Build 376) on Excel 2007 32-bit and Excel 2013 64 bits to allow our end users work easier.

  Unfortunately, almost all of our reports contains guests and when you try to insert an object in the Excel worksheet, we see the 'object' error reference not set to an instance of an object and Excel crashes.

  Is there a solution?

  Thank you very much.

  Hello

  Check out the following:

  When you try to import a report, a Pop Up shows Up in Excel with the following error: "object reference not set to an instance of an object" (Doc ID 1952856.1)

  Noticed that:

  CAUSE

  Caused by a code bug introduced in 11.1.1.7.140715 patch bundle. Also occurs in 11.1.1.7.141014.

  Duplicated 7.140715 symptoms and could not on 7.140527.

  Bug 19545187 - SMARTVIEW 11.1.2.3 ERROR: OBJECT REFERENCE NOT SET to THE INSTANCE OF AN OBJECT - duplicate of below
  Bug bug 19682114 - of the COLUMNFILTERPROMPTDEFN LABEL OBJECT IS NULL for all NEW CREATED REPORTS - internal

  SOLUTION

  Apply Patch 19682114 - COLUMNFILTERPROMPTDEFN LABEL OBJECT IS NULL FOR ALL NEW REPORTS CREATED

• How can I create a submit and a reset button on a form

  I would like to create a submit and a reset button on a form. How do I do that?

  Go to the form editing mode, add a button field, then go to its properties and add these actions under a trigger mouse upwards.

• Move the 'Apply' and 'Reset' buttons

  Hi guys

  I'm obiee 11.1.1.8.1 and I am struggling to find the solution or invites to go down buttons apply and Reset on the dashboard.

  Help, please

  In 11.1.1.7, I would do like this:

  

  Look at the HTML code of the page to identify the structure and CSS setting the buttons on the right.

  This is easy: there is a class does exactly cela.

  Add a block of text in the page just before the guests that contains this code:

  (check the box 'contains the HTML markup')

  Fact!

  If you always want your button centered or left-aligned you can also edit the file views.css to your custom (new: personalized!) style/skin and this is the new default position of the buttons (on each page using the style/skin).

• Materialized views Oracle | Reporting

  I have a requirement as follows:
  
  Requirement:
  We must create a Reporting DB to be used for information and a transactional database will be in separate host. Fundamentally, he need to extract data from a set of transactional DB tables and move to the Reporting DB schema at adequate intervals.
  
  
  We may have to get a different column data in different tables and store it in a single table / several reports DB tables.
  
  
  Solution (Please confirm):
  
  I intend to use Oracle materialized views in the same host as transactional DB to next part of requirment
  
  "We may have to get a different column data in different tables and store it in a single table / several reports DB tables.
  
  and then use Oracle streams to move at regular intervals of DB reports.
  
  Is this feasible?
  Or please suggest a solution.
  
  Thank you
  APPU

  We must create a Reporting DB to be used for information and a transactional database will be in separate host. Fundamentally, he need to extract data from a set of transactional DB tables and move to the Reporting DB schema at adequate intervals.

  Depending on how small and simple is your database, you can create materialized views on the Reporting DB to point to DB Transactionla through the database link.

  I intend to use Oracle materialized views in the same host as transactional DB to next part of requirment

  If are simple MVs, then let them cool off quickly. If too complex, all jobs to refresh at specific intervals.

  "We may have to get a different column data in different tables and store it in a single table / several reports DB tables.

  You will be several tables in DB report in the form of the Metrialised views

  and then use Oracle streams to move at regular intervals of DB reports.

  This combination is not necessary. You're talking about two different things at the same time.

• iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:

  Notify your credit card company / bank of potential fraud

  Change your bank accounts and report your fly/fraud credit card

  Change all of your passwords

  And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.

• need to put a download in report page button and clicking on it, only few columns will download (only specified)

  Hello

  I need as I put a download in report page button and clicking it will download only few columns (only specified). I use Apex 4.2.

  Please give an idea.

  Thank you

  Chebli

  Action-> download-> when you click the CSV, it will send a request like "CSV". Change the columns that you want to include in the output csv file. Go to the Condition section,

  Condition type: request is NOT contained in the Expression 1

  Expression1: CSV

  This column will not include in the csv file.

  Thank you

  Lacombe

• Is Oracle and the Developer installation reports

  Hello
  
  It seems that the Internet Developer Suite 10g (10.1.2.0.2) installer allows us only to install the complete set of tools that is Oracle Forms Developer, Oracle Designer, Oracle Reports Developer and Oracle10g JDeveloper and we cannot do a custom install which either we would just install forms and reports or to remove install station Designer and JDeveloper.
  Is there another way to install only the tools forms and reports?
  
  Any help or advice would be appreciated.
  
  Thank you
  Marek
  
  Published by: Marek Kratky on 12 July 2012 14:53

  Is there another way to install only the tools forms and reports?

  No, you must install everything to get forms and reports.

  Craig...

• Send and reset buttons does not work on the contact form

  Hey, I use Flash CS3 and ActionScript 2. I created a simple contact page, inside a clip (because I got fading), I put the script in the main timeline, so not inside the animation, but the buttons send and reset may not respond. I checked the instance names and spellings are correct, here is the script I use:

  contact_tween.send_button.onPress = function() {}

  If (name eq ' ' or subject eq "" or message eq ' ' or by e-mail at eq "") {}

  Stop();

  } else {}

  loadVariablesNum ("form.php", 0, "POST");

  gotoAndPlay (211);

  }

  };

  contact_tween.reset_button.onPress = function() {}

  name ="";

  subject ="";

  message ="";

  email ="";

  };

  so, what I am doing wrong? any help appreciated, thanks.

  PS. contact_tween is the name of the movie I created to fade the page contact and exit.

  If you want to hire me to solve your problems, send email via my website (www.kglad.com).  free help continue the validation of this forum.

• IPP printing and Oracle report

  Hi all
  
  
  I got error reports when you use IPP printer. It actually burst errors REP-177 and REP-713. Could someone advice how to use IPP printer with Oracle report?

  10g is not supported IPP, this tool on 11g report

• (1) how to reset the task in view/default Access Manager? __2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  When I open the window (in Windows Vista) Task Manager, it shows that the "Applications" tab  I can access is more 'Processes', tab 'Performance' and 'Network'... this just started recently.
  (1) how to reset the task in view/default Access Manager?
  (2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  Double-click inside the border/edge to bring it back to the default view for Task Manager.

  Malware scan:

  Download, install, upgrade and scan with Malwarebytes to check / remove Malware/spyware.

  If necessary, do all of the above work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

   

   

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon. Mick Murphy - Microsoft partner

• What is the problem with my Oracle reports parameter?

  Hello

  We use a PL SQL package that allows the user to select the report you want Oracle and associated parameters.   While the control is passed to Oracle 11 g reports.

  The requirement of one of the reports is to enable more detailed codes be selected by the user and then shown.  The detailed code is an alphanumeric field that can hold between 4 and 6 characters.

  If my data model looks like this

  SELECT student_id

      FROM my_view

     WHERE detail_code IN :p_detail_code;

  and the parameter that I'm passing to Oracle reports looks like this (when I view the source HTML code)

  & p_detail_code =('1001','1002')

  so no record is selected.

  However, if my data model looks like this, I get the records you want:

  SELECT student_id

    FROM my_view

  WHERE detail_code IN ('1001', '1002');

  We have Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production.

  Please tell me what is the problem with my setting.  Thanks a lot for your help.

  This isn't how you can use in. See this example on how to solve it with the digital settings. If your setting is a character, you need to change this.

  In fact, when you simply enter 1,2,3 as an input parameter, you actually create this query:

  Select *.

  from my_table

  where num_column in ("1,2,3")

  Use rather a lexical parameter:

  Select *.

  from my_table

  & p_where

  In the parameter after relaxation shape, build the lexical like this:

  :p_where := 'where num_column in ('||:p_param||')';
  

• Taskflow dynamic array and reset the user interface States

  Hi team.

  I use JDeveloper 11.1.2.4.

  I have a nice flow dynamic bounded task that has a view main activity.  Links to view activity change as part of the workflow.  The workflow is initialized with a navigation event.  The display shows just a table of data corresponding to the navigation event.  The table is sortable.  It all works very well.

  The challenge that I meet is that users do not want details of the sort on the table has persisted between navigation events.  So they select NavA, the query executes against ViewA.  They select NavA, they query executes against ViewB.  The table and the activity of the view are the same.  And, during the navigation, in the framework of task flow not related, the display does not actually change in the region.  It is updated with the appropriate data, but the genre are also persisted.  It feels like the client stores the State of the table that I'm not able to remove the sorting criteria of the Rich Table via a managed bean.  Certainly, it feels like what must be launched from the client instead of a managed bean. I don't want to add buttons to view activity to do the reset, because users want this to be triggered by the navigation event.

  If I spend a dynamic unrelated workflow and to return to the dynamic workflow, so details are reset beautifully.  However, this is not an option for the users.

  Any suggestions on the approach would be appreciated.

  Thank you

  
  BradW

  OK, so I had to add this feature to my menu:

    public void setResetMainRegion(String regionName){
      if (regionName != null && !"".equals(regionName)){
        UIComponent mainRegion = JSFUtils.findComponentInRoot(regionName);
        RichTable table = (RichTable)JSFUtils.findComponent(mainRegion, "DynamicCodeTablesTab");
        if (table != null){
          List sc = new ArrayList() ;
          table.setSortCriteria(sc);
          AdfFacesContext ctx = AdfFacesContext.getCurrentInstance();
          ctx.addPartialTarget(table);
        }
  
      }
  

  The thing is that we must find the component, as it is extremely difficult to work with PageFlowScoped managed beans that have been created to support tables.  Such a simple fix, it took you a while to understand where the issue should be resolved.  It seems that some of these issues have to keep longer appears outside the BTF.  Not ideal because this introduces too many dependencies.  Trying to minimize as much as we can.

  BradW