Submitting a form on the test server
Hi all
I run a WAMP server on my laptop and so far did not worth setting up a test server. I'm trying now.
I have a small php/mysql site with a login.
I raise the index php and it asks me to discover the files so I press Yes. In live mode view, I fill the login form, and then press ENTER. Then I press on enter again. After about 5 steps I realize that the enter key will not work now.
On my WAMP, it works very well. Present on it checks errors, and if it is not all redirects to a page called loggedin.php
Should I wait for the button submit to redirect within the window he direct DW?
(BTW if I bring logeedin.php, discover the files it shows me the login.php file - which is what I expected since no cookie has been set yet)
Thanks in advance
Edward
I normally don't use Live View for test forms. However, for links and buttons to work in Live View mode, you must hold down the CTRL (Cmd on a Mac).
Tags: Dreamweaver
Similar Questions
-
Is it OK for the test server, and the server signs Local point to the same location?
There seems to be three places where the files of my site: local files, server assessment and remote server. I am happy with the remote server. What I'm confused about are the other two.
I understand that to build a site using mysql databases that I need to set up a test server. Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs. I tested FormMail, hence the name of the site is formmail
So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel). I then use a preview in the browser to see my changes. It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place. What is the point of the testing server Panel?
I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host. If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?
Maybe my setup is incorrect. I guess my question is, is it OK for the test server, and the server signs Local point to the same location?
Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.
-
Files uploaded to the test server
Sorry to bother you again but ran into a problem with the testing server. When I go to upload my new files to my remote server, the files are uploaded to the place on the test server. How do I change this setting?
I have branched out in a new discussion. Please start a new thread for another question rather always add to a thread that has already been answered. It makes it easier for others to see and often get an answer more quickly.
When the files are uploaded to the server assessment or repository rather than your remote server, expand the files Panel by clicking the icon at the far right of the Panel, as shown in the screenshot following.
In the developed Panel, click the icon for the remote server, as shown here:
This changes the default connection on the remote server, even after restoring the Board to its normal size.
-
The cooperative, I belong to have a home page made with Dreamweaver, several years ago. Some of the pages suddenly stopped working with this error message:
File not found:
includes/common/lib/file_upload/KT_FileUpload.asp
Please understand that download / file on the test server.
I checked, and the file is actually missing on the web server. What I have to buy Dreamweaver to download this file, and it is a path worth pursuing?
Dreamweaver version: I don't know who or how to check this, could check if given appropriate instructions.
The page you have shown uses one of the InterAkt extensions for Dreamweaver. Unfortunately, InterAkt was acquired by Adobe, which, in turn, did nothing with it. The latest version was about 5 years ago and was called uninstall.
Maybe someone here can help you friends of Interakt: Home Page
-
How to use the test server.
I have my website concretestairslondon.co.uk and I want to redesign this website; However, I still want the old one as it is until my new is ready.
I have another domain and hosting and I would test this site I am building. I'll stop the crawlers to the site via htaccess so I don't get penalized for content duplicate.
I like the feature to automatically download to the server via save with Dreamweaver, but I'm afraid it will download to the remote server. What is the way to download only to a remote server when the site is fully completed and tests are completed?
In fact, you can have all the servers defined in the site definition, but DW use only those that you have enabled by checking either FTP or TESTS. In this case, let them all off except for the testing server.
-
the images are no longer appearing after that I created the test server
Hi, I'm working on a php site. When I import images files appear regularly in the design window and when I saw witg F12. But once I created the Test Server that they no longer appear. No idea why?
Hi libdaciu,
Try to remove the first slash to source path. Update the path of the CBC to src = "gimgs/fandick.png"
Please try this and then let us know.
-
Lost the ability to download related when files you are using the test server.
I used to get a dialog when I me overview of files on my local machine using my localhost test server configuration. It's kind of annoying to have to click Yes every time. Last week I clicked the do not show this dialog again and now when I saw a site on my localhost associated files and updated files are not uploaded. I manually download the css, php and other related files to the record of the test server.
I tried to remove preferences, re-installing Dreamweaver CS4 and all I can think about, but I can't recover this option. Is it possible, except using the same folder for the site and the testing server to avoid this problem?
Thank you.
Edit > Preferences > Site > to load files > check the "prompt on Put or Check in.
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
www.Alt-Web.com/
www.Twitter.com/ALTWEB -
Preview in the browser tries to access the test server
I'm building a site and want to preview in the browser, but always get a message concerning access to the test server. I just want to view it on my hard drive. I'm sure I put something wrong during installation, but can someone help me understand how to change settings? The message I get is http://localhost/Templates/main%20template.dwt.asp in Safari.
I also want to get a preview in Explorer, but don't have it installed on my machine. Should I buy it just for the preview?> Yes, I now see that it is .asp, but it isn't by choice. What I did to
> who create instead of just a .dwt and how do I change.This model will be applied to the asp pages?
If not, my guess is that in creating this definition of the site, when the site «»
Assistant"asked only if you plan to use the technology on server side, you said yes,
ASP.Fix ' open definition site for editing.
Click the Advanced tab.
in test server info, set access to zero.then in the dw files Panel. Rename the template.dwt.asp to template.dwt
--
Alan
Adobe Community Expert, dreamweaver -
DW 8 do not recognize the test server
I'm trying to set up a test server in Dreamweaver 8 on XP. The web server is IIS running on a Windows Server. I'm mapped to disk sharing where the wwwroot.
In the "Site Definition" dialog box, under test server, I chose "asp vpscript" as the model of server, ' Local/network' for access and pointed to the network share for the "test server" folder
After clicking ok and open a new asp document, all the tabs under 'Request' tell all ' to use dynamic data on this page:...» "Every thing is checked except"the test of the site Server Configuration.
No matter what I can not do DW to acknowledged that the testing server has been implemented.
Anyone know what to do at this point?
Thank youOK, I thought about it. DW 8 is not happy if you use an IP address instead of a domain name for the URL prefix. I put the URL prefix for the DNS entry for our development server and everything works fine now.
-
HI I'm under dreamweaver 9 on a mac and seem to have PHP/apache works well - poster test and PHP information page, but when I try to get a glimpse of a web page I get the following error
Forbidden
You don't have permission to access /~paulwright/phobiagone/TMP8M213JYFG.php on this server.
I think I'm doing something wrong in the URL of the test server. Help, please! The files are stored in user (paulwright), sites, phobiagone and the URL to test that I put in is http://localhost/~paulwright/phobiagone/ , I also tried http://localhost/~paulwright/sites/phobiagone/ and no work
Thanks for your help. Advice or assistance will be greatly appreciated as this is driving me crazy. Thank youHi all
Thanks for the help and advice. It turns out that I had to create a new .conf under my user name file and everything works now.
Nancy, I'm on a Mac and it seems that the mac must have a ~ in front of the user name in the name of the test server.
I'm just very happy to have work now after a long struggle, it is 2 simple things requiring a change and now all the work - I hope - looking good so fingers crossed
Thanks again to everyone for all help you and time
Best regards
Paul
-
Distribute the form using the internal server
I created form forms central and exported in PDF format.
PDF distribution options that I distribute and collect the response email and acrobat and internal server using the network or shared folder.
When I select the internal server, it pops the network folder selection step. When I send a test on the tracker form, it shows that the form was sent using email attachment and no server.
Any ideas how to change the mode of distribution?
Susan
I think that if you want to use an internal server, you do not use central, but regular acroforms forms and your own server scripts. The scripts of central forms are not available to get you on your own server. (I'm sure someone will correct me if I'm wrong).
-
Submitting a form Via the REST API using the PHP library request
Can someone send please how to use the library to query PHP found at fredsakr/eloqua-php-request · GitHub to publish form to Eloqua data?
So far, I have following:
// include the Eloqua REST client require_once('eloquaRequest.php'); // define the Contact class class ContactForm { public $FirstName; public $LastName; public $PhoneNumber; public $Institution; public $ContactComment; public $EmailAddress; } $client = new EloquaRequest('SITE', 'USERNAME', 'PASSWORD', 'https://secure.eloqua.com/API/REST/1.0'); // instantiate a new instance of the ContactForm class $contact = new ContactForm(); $contact->FirstName = 'Sample'; $contact->LastName = 'Import'.date("Y-m-d-H-i-s"); $contact->PhoneNumber = '111-111-1111'; $contact->Institution = 'Company Name'; $contact->ContactComment = 'This is a test of the API'; $contact->EmailAddress = '[email protected]'; // invoke a POST request to create the contact $response = $client->post('/data/form/45', $contact);
However, it returns the following:
array(1) { [0]=> object(stdClass)#318 (4) { ["type"]=> string(21) "ObjectValidationError" ["property"]=> string(11) "fieldValues" ["requirement"]=> object(stdClass)#316 (1) { ["type"]=> string(23) "NoDuplicatesRequirement" } ["value"]=> string(6) "" } }
Can someone give me a guide step by step on how to do it properly please?
Hello world
We have added a 'sample' in the repository of PHP library folder request on Github. The first example shows how to submit form using the API data:
Please note that you can describe the form fields and other metadata using the following endpoint:
- To access the forms : GET/assets/form / {id}? depth = {depth}
Hope this helps and please let me know if you need more information.
Thank you
Fred
-
I have trouble to correct the configuration of the testing server in Dreamweaver CS4.
Http error codes are 404 (open DW) and 12150 (URL test failed).
Please see my responses below:
Moore6931 wrote:
Thank you for your help, but I don't understand.
1A right now, I have change the web site locally. When changes are complete, I copy the files to the remote server (Go Daddy), with FTP.
Perfect. In this case, I won't even try to change you to use FTP in Dreamweaver under construction that will probably confuse you at this stage. In this case, go to "Remote Info" and make "None" - remove all credentials from here - we don't need configured in Dreamweaver if we do not use to it.
2. because my changes are local, test files is local. In fact, I normally disable the network connection, when I don't need open.
Go to "Test Server" and make 'None' and delete all credentials - make it too empty. Given that you do not use the 'dynamic' services, we don't need to set up a. Your previews may occur through your browser to your "records the.
3 go Daddy uses PHP on Linux servers for hosting.
Well, Go Daddy also offers a variety of other options - but I guess you bought a configuration hosting Linux with PHP running on it. Let's not worry PHP here because you are using PHP for developing your site.
4. because I'm not a fan of computer terminology, computers and computer configurations, I try to leave the default settings.
The only thing you need to keep "like what" is your "local Info". Other than that, delete configurations of both 'Testing' and 'Remote '. You should go there without delay.
5. I'm not sure of the requirement of test server. A "dynamic" page descriptions are unclear to me. My website uses,
a. html,
(b) a page of XML data to sort my photos.
c. spry tables cascading,
d. scrolling of the photo thumbnails.
e. links to pdf files and
f. contact email.
A regular HTML site is usually "static" - as all the content you have in it is "hard coded" or "manuscript" in there. A PHP / ASP / JSP / CFM code is usually 'dynamic' - which means only the main template is usually done with the code. The content is retrieved from a database or from an external source. And this (to extract data from a database), such code must run on a server environment. This is the primary difference between 'static' and 'dynamic' Web pages. Do not enter into the details of what I'm not sure if this will confuse you more!
If this is not clear, please see me website.
-
How to upgrade in a loop all files on the test server?
Hello
My web site in the Navigation bar has a link to another web site that runs the Aspx program.
And my server is only HTML
"I used to update my pages html on an another test server changes do NOT HAVE SHOW UP by disconnecting" spotted in the Local browser
Now, I put my whole site and the links are NOT work on the remote control. They work on my laptop.
www.collegestudentvoice.com
see you soon,
Dreamweaver101
The links on this site work for me.
-
Application.CFC on the test server
Hello
I use Application.cfc on the local server to test, and I'd like to test my site in a subfolder "/ beta" on the remote server.
I wish I had an Application.cfc in/beta/admin so to have different behaviors. So I used an ApplicationProxy.cfc in/beta/admin that inherit from the Application.cfc of /beta, but I get the root one.
I think with Application.cfm, would be easier: If there is nothing in this record, the app will search the folder above and so on. If I could move files without hassle.
But I also need Orm...
Any suggestion?
Thank you
I wish I had an Application.cfc in/beta/admin so to have different behaviors. So I used an ApplicationProxy.cfc in/beta/admin that inherit from the Application.cfc of /beta, but I get the root one.
The file/beta/admin should always be Application.cfc. You have another file dir which extends from the root of your Application.cfc... does not mean that CF knows to look for. CF Search Application.cfc, not ApplicationProxy.cfc.
The Application.cfc in/beta/admin should extend beta. Request.
--
Adam
Maybe you are looking for
-
I accidentally added nattly my homepage as well as this nattly Defender. When I change the homepage back to Firefox, the next day, nattly pops up again. Help!
-
Cannot install Windows 2000 on my Satellite 1800-514
I am trying to install windows on my Satellite 1800-514. but when Setup tries to copy files to the hard drive I have some errors on some files are not copied correctly (it says it can't find them, I checked well and they are on the cd). is not always
-
Cannot use WLAN on Satellite P100 when encryption is enabled
My new P100-240 connects to the internet via my router Belkin MIMO cable and wireless without problem if I enable WEP security. If I enable security either 64 or 128-bit, then while the router connects to the laptop I can't access the internet, using
-
Save multiple pictures with a dialogue box
Hello I try to add a feature to a program of mine to record multiple images with a single click, but I get these ridiculous errors saying "file not found" to "Open/create/replace the file" function, which is set to create. Of course, the file is not
-
I get the following error AUDIOSES. DLL is damaged
I get the following on my Compaq Presario CQ62 error when I start Windows 7 'AUDIOSES. DLL is not designed to run on Windows or it contains an error. "This just happened recently. Also, when I click on iTunes or Windows Media, I get 'GNSDKMUSICID. DL