Subscribe with photoshop, but the problem is when I type in Arabic, letters are not connected they are supposed to be, please help me solve this problem?

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• My printer cuts left, emails from Outlook Express, but is OK to print WORD documents. Is someone can you please help me solve this problem?

  My printer cuts left, emails from Outlook Express, but is OK to print WORD documents. Is someone can you please help me solve this problem?

  I have Windows XP.

  really grateful for any advice.

  Concerning

  Spender 9

  OE uses IE settings.  Then configure things in IE (margins and others) and it should then apply to the when you print from OE.

  Steve

• Please help me solve this problem makes me crazy. I tried to install and reinstall photoshop EXTENDED several times and each time I have lunch there ask me serial number in which I entered once, nothing happens

  Please help me solve this problem makes me crazy. I tried to install and reinstall photoshop EXTENDED several times and each time I have lunch there ask me serial number in which I entered once, nothing happens

  Hi Glenn,.

  Please try the steps mentioned in the link below and see if you are able to serialize your software.

  • Log, activation, or connection errors. CS5.5 and later, Acrobat DC
  • Try Solution 2: clean the connection of the cached user information.

  Please share the results after you perform the steps.

  Thank you

  Atul Saini

• I can't shoot at a site in the usual browser... in navigation private. I can pull up in other browsers and could pull up 2 weeks ago... now I can't. Please help me solve this problem?

  Question
  I can't shoot at a site in the usual browser... in navigation private. I can pull up in other browsers and could pull up 2 weeks ago... now I can't. Please help me solve this problem? Also, I can' signed in 'members only' in private browsing mode.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• How to prevent a user not to access a table of perticular? This user has select any table privilege. Please help me solve this problem.

  Hello

  How to prevent a user not to access a table special (xxx)?

  This user has SELECT a TABLE ALL privilege. I need to restrict to only not for access xxx to the table, but this table is not existed in its own schema.

  But there is access able as select * from schema.table;

  How can I revoke this privilege.

  Please help me solve this problem.

  Thank you

  Lacombe

  1623609 wrote:

  How can I select privilege on specific tables at the same time?

  I want to create a new user and grants the right to select for tables, except a table (xxxx).

  It will be possible without the keystone of the database?

  One way, in several sql

  coil doit.sql

  Select ' grant select on ' | owner: '. ' || table_name |' to someuser. »

  from dba_tables

  where

  spool off

  Then sanity check "doit.sql" and execute it.

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• I really need HELP! I received the nugel.exe virus on my laptop and I really missed the whole system! PLEASE HELP ME SOLVE THIS!

  I really need HELP! I received the nugel.exe virus on my laptop. I have Windows XP and I was reading how to remove it. They told me to go to click on the Start button in it, then click on run. type msconfig and on the Startup tab, uncheck everything that ends with TSSD. Well, none of which ended in TSSD was there, so I was told everything that had an UNKNOWN manufacturer in buttons SERVICES and STARTUP uncheck. I restarted my computer and the NELSON was always there.  Then suddenly my computer shut down on its own and restarted with a screen that says now "Windows didn't start because the following file is missing or corrupt: \system32\hal.dll .» Please reinstall a copy of the above file. "Does anyone know how to do this? I feel that I've dealt with the virus stupid for days and I'm going crazy! Can someone please help me solve what I did wrong? PLEASE, I BEG YOU!

  Hi ehaze64,

  Looks like you have made incorrect changes in system configuration utility.

  See the Microsoft articles below to solve the problem by installing the recovery console and use the Bootcfg.exe tool to rebuild the Boot.ini file.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

   

   

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

   

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion DM1 with Win8: illustrates the key commands when I type the letters.

  The problem is: when I type, for example, a K command "Devices" if poster or if I press the "Windows Help and Support" delete key appear the only way to stop him is to press the keys c and Windows, but it comes back in after typing about 6 keys. This makes the use of the keyboard almost imposible. In addition, I can't type a capital C when you use the button to the left.

  I tried to type high touchpad on left twice who stops him, a small light but I let go of the mouse.  I also did the thing about keys to sticky to ensure that was'nt on.

  The problem does not appear when I use a keyboard connected via usb.

  Any suggestions would be most welcome.

  It's time to replace the keyboard. If you have the warranty please ask HP.

• My iPhone 4S has had problems with Wi - Fi and now I can't enable Wi - Fi more. Please help me solve this problem!

  My iPhone 4S began no not detecting WiFi signals. I have fixed that by removing the SIM card, but after awhile it was not detected at all and kept scanning. I tried to type the details of a Wi - Fi connection in the other section, but it didn't work. He says 'Could not find wireless networks'... I restarted because after removal of SIM card, which fixed the problem and now I can not turn on Wi - Fi. I need a Wi - Fi connection so please help me!

  A certified technician have a look...

  But it seems to me: I have seem similar symptoms before - as the WiFi radio gave up the ghost.

  I bet if you went to "Setting"-> "Général"-> "About" you won't see any address for the WiFi radio.

  If so, the radio has launched the bucket and as far as I know, it is part of the motherboard - there is therefore no route to the resurrection really... It is live with it that way, or get a replacement phone. I'm sorry.

• There is little space between the paths, please help me solve this problem

  Hello everyone, I have little doubt on the trail. I have this problem every time, I searched and found no answer.

  There is little space between the two tracks of different colors. There are image below to show the more open problem.

  Thanks for help.

  

  sscayir,

  It seems that the artifact/Anti-Aliasing screen problem so often discussed here.

  You can get rid of it by uncheck work of Anti-Aliasing in Edit > Preferences > General, see more of pixelation on screen, but you will probably find that the artifact remains the same size when you zoom in and that he will not appear in the PDF files, print, and images raster created by export or save for Web. and again, it can be a real problem.

  Who is this?

• Please help me solve this problem: Wireless PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01no

  I installed windows 7 on my laptop but I do not less access the wire. in driver manager it is a yellow question mark on the controller of the internet, and when I click on the property, then Details then the description of the device and then click hardware ID it is these codes:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  my laptop: hp pavilion 5CD249693Y g6

  the operating system is Windows 7 Home premium 32-bit.

  need your help please.

  Thank you

  Hello:

  This driver should solve the problem for you.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

• Please help to solve this problem?

  I have two basic edit with user name and password fields:

  When you use the following code I had posted as

  username: textbox

  password: text box (text box moves a little bit in this case, if I changed the width of the box according to the username box, but the characters typed are started from wrong place)

  The error is in: when I typed in the user name text box it starts from the left corner of the box in the right order, but when I typed in the password box it does not start successfully in the box. Or maybe the two boxes are not displayed in the correct order.

  loginName = new BasicEditField ("username:", "", 28, 0)
  {
  private int getFont () .getAdvance = iRectX (getLabel ());
  public int getPreferredWidth()
  {
  Return Display.getWidth ();
  }

  public int getPreferredHeight()
  {
  return 30;
  }

  public void layout (int width, int height)
  {
  Super.Layout (width, getPreferredHeight());
  setExtent (width, getPreferredHeight());
  }

  public void paint (Graphics g)
  {
  g.setColor (0x000000);
  g.drawRect (iRectX, 0, 250, 23);
  Super.Paint (g);
  }
  };
              
  Password1 = new BasicEditField ("password:", "", 28, 0)
  {
  private int getFont () .getAdvance = iRectX (getLabel ());
  public int getPreferredWidth()
  {
  Return Display.getWidth ();
  }

  public int getPreferredHeight()
  {
  return 30;
  }

  public void layout (int width, int height)
  {
  Super.Layout (width, getPreferredHeight());
  setExtent (width, getPreferredHeight());
  }

  public void paint (Graphics g)
  {
  g.setColor (0x000000);
  g.drawRect (iRectX, 0, 250, 23);
  Super.Paint (g);
  }
  };

  First of all, your Image is not visible.

  And try this.

          LabelField lbluser = new LabelField("Username:");
          BasicEditField txtuser = new BasicEditField("", "", 28, BasicEditField.FILTER_EMAIL)
          {
              private int iRectX = getFont().getAdvance(getLabel());
              private int iRectWidth = Display.getWidth() - iRectX - 2;
  
              public int getPreferredWidth()
              {
                  return Display.getWidth();
              }
  
              public int getPreferredHeight()
              {
                  return 30;
              }
  
              public void layout(int width, int height)
              {
                  super.layout(width, getPreferredHeight());
                  setExtent(width, getPreferredHeight());
              }
  
              public void paint(Graphics g)
              {
                  g.setColor(0x000000);
                  g.drawRect(iRectX, 0, 248, 20);
                  super.paint(g);
              }
          };
  
          LabelField lblpass = new LabelField("Password:");
          PasswordEditField txtpass = new PasswordEditField("","",20,PasswordEditField.EDITABLE)
          {
              private int iRectX = getFont().getAdvance(getLabel());
              private int iRectWidth = Display.getWidth() - iRectX - 2;
  
              public int getPreferredWidth()
              {
                  return Display.getWidth();
              }
  
              public int getPreferredHeight()
              {
                  return 30;
              }
  
              public void layout(int width, int height)
              {
                  super.layout(width, getPreferredHeight());
                  setExtent(width, getPreferredHeight());
              }
  
              public void paint(Graphics g)
              {
                  g.setColor(0x000000);
                  g.drawRect(iRectX, 0, 253, 20);
                  super.paint(g);
              }
          };
  

  Add them in the HorizontalFieldManager.
  Then add to the screen.

  ------------------------------------------------------------------------------------

  Kudo press to say thank you to the developer.
  Also, press accept it as a button when you got the Solution.

• I get an error cood1197 please help me solve this problem

  I get an error cood1197 please help me to solve this problem, help please.

  Hello

  1. when, exactly, you receive this error message?

  2 do you have problems with Windows Media Player?

  If you receive this error when you use Windows Media Player, refer to the methods described in the article mentioned below and check.

  Windows Media Player C00D1197 error:

  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  I hope this helps!

• Please help me solve this problem. I am a newbie in coldfusion

  I want to use a single home page where I'll show a form (that is in another file) to the user to download a file, I also want to show the result of the download on the same page after uploading (result of the action file).

  These are my three files:

  1 index.cfm

  <! - start - >

  < html >

  < head >

  < title > < /title > home page

  < cfajaximport tags = "FORM" >

  < / head >

  < body >

  < cfdiv id = 'Hand' style = ' width: 1000px; "height: 600px" >

  "< cfdiv id = 'Options' style =" width: 100%; "height: 20%" >

  Welcome Admin, < a href = "javascript:ColdFusion.navigate ('FileUpload.cfm', 'Content') ' class = 'settings' > update < /a > < a href =" # "class ="logout"> sign out < /a >"

  < / cfdiv >

  "< cfdiv id ="Content"style =" width: 100%; height: 80% ">"

  < h2 > here will form and FileUploading < / h2 >

  < / cfdiv >

  < / cfdiv >

  < / body >

  < / html >

  <!-->-->

  2.FileUpload.cfm

  <! - start - >

  < html >

  < head >

  < title >

  Upload a file

  < /title >

  < / head >

  < body >

  < cflayout type = "vbox" name = 'layout1' >

  < cflayoutarea >

  < cfform enctype = "multipart/form-data" action = "FileReceiver.cfm" > "

  File to download:

  < cfinput type is "file" name is "Filename" size = "50" >

  < br / >

  < cfinput type = "submit" name = "UploadFile" value = "DOWNLOAD this FILE" >

  < br / >

  < / cfform >

  < / cflayoutarea >

  < cflayoutarea >

  < table border = "1" >

  < b >

  < th >

  Information about the directory

  < /th >

  < /tr >

  < b >

  < td >

  < cfoutput >

  CurrectDirectory path: #getdirectoryFromPath (expandPath ("index.cfm")) #.

  < / cfoutput >

  < table >

  < /tr >

  < /table >

  < / cflayoutarea >

  < / cflayout >

  < / body >

  < / html >

  <!-->-->

  3.FileReceiver.cfm

  <!-Start->

  < isdefined ('UploadFile') cfif >

  < cfoutput >

  < cffile nameconflict = "makeunique".

  action = "upload".

  FileField = "Form.FileName"

  destination = "#getdirectoryFromPath (ExpandPath ("index.cfm")) ' # ' > <!-or destination ="c:\Upload\"->"

  File upload was successful!

  < / cfoutput >

  < / cfif >

  <!-->-->

  When I click the page index "update link" shows the page of FileUpload.cfm in one of its container, but when you download the file

  I always get the MESSAGE of ERROR:

  Recovery of the cf_layoutarea736558924094373 element markup error: invalid content type: application/x-www-formulaires-urlencoded; Charset = UTF-8. [Enable debugging by adding 'cfdebug' to your URL parameters to see more information]

  Help kindly make me right... I am unable to understand the problem...

  Ah, I found the cause of the problem: Coldfusion stores the properties of UI such as cfdiv and cflayoutarea tags in the form field. It is what is destroying your upload form. To see this, run the following test code:

  Now, looking for a possible solution.