subtract the error function

Similar Questions

• I don't know why I get the error "function object is not defined" with this script.

  Hello

  I have a script which adds a unique model in the render queue and applying a Render parameter model and model output for adding module make element of queue.  For some reason, I am getting an error on the first line which reads:

  app.project.renderQueue.items (1), .applyTemplate ('MY SETTINGS');

  I have attached the image of here error dialog:

  

  Here is a part of the script.

          var currentProjectItem;
          var globalCompItemID;
          var renderCompItemID;
  
          for (var i=1;  i <= app.project.numItems; i++)
          {
              currentProjectItem = app.project.item(i);
              if (currentProjectItem.name == "globals")
              {
                  globalCompItemID = i;
              } else if (currentProjectItem.name == "!_FINAL RENDER") {
                  renderCompItemID = i;
              }
          }
  
          //add the necessary preview render jobs
          app.project.renderQueue.items.add(app.project.item(renderCompItemID));
          app.project.renderQueue.items(1).applyTemplate("MY SETTINGS");               <---THIS IS WHERE AE ERRORS
          app.project.renderQueue.items(1).outputModules[1].applyTemplate("MY SETTINGS");
          app.project.renderQueue.items.add(app.project.item(renderCompItemID));
          app.project.renderQueue.items(2).applyTemplate("MY SETTINGS");
          app.project.renderQueue.items(2).outputModules[1].applyTemplate("MY SETTINGS");
          app.project.renderQueue.items.add(app.project.item(renderCompItemID));
          app.project.renderQueue.items(3).applyTemplate("MY SETTINGS");
          app.project.renderQueue.items(3).outputModules[1].applyTemplate("MY SETTINGS");
  
   
  

  The model I want to add is added to the render queue, it simply refuses to invoke the method applyTemplate() on the most recently added make queue item.

  Any ideas why I get this error?

  Thank you!

  I think that from the line where the error occurred, you must use renderQueue.item () instead of renderQueue.items () (except when you add something to the rendering queue).

  Dan

• Compile the creation of the error function, over and over again

  I don't see anything wrong with this function. Everything I run with SQL Developer I get a compile error, I try to fix that and get five more who have no sense. All "inappropriate" generic syntax errors
  
  There is something terribly wrong with my function? I have re-written so several times, I think that I did nothing, but tried to slip in with the DB knowing, which is not me to get anywhere.
  
  I shows the log of compiler errors, but as I said, he continues to change and add an error with any change to the function
  
  Any ideas? At this point, I think Developer SQL (for Mac) is just smoked. I often force quit
  

  CREATE OR REPLACE FUNCTION emp_status
       (emp_first IN VARCHAR2, 
       emp_last IN VARCHAR2,                        
       emp_num IN NUMBER,
       staff_id IN NUMBER
       staff_rank IN VARCHAR2)                     
       
  RETURN VARCHAR2 
  
  IS  
       emp_information VARCHAR2(80) := emp_first || emp_last || ' has a rank of ' || staff_rank);          
      
            
  BEGIN
  
  SELECT employees.e_first, employees.e_last, staff.e_id, staff.s_rank
  INTO emp_first, emp_last, staff_id, staff_rank
  FROM Employees, Staff
  WHERE employees.e_id = staff_id;
  
  RETURN emp_information; 
  END;

  tables
  

  -- Create tables 
  CREATE TABLE EMPLOYEES
  (e_id NUMBER(1),
  e_first VARCHAR2(20),
  e_last VARCHAR2(20));
  
  CREATE TABLE STAFF
  (s_id NUMBER(3),
  e_id  NUMBER(1),
  s_phone VARCHAR2(10),
  s_rank VARCHAR2(8));
  
  -- Insert into tables
  
  INSERT INTO EMPLOYEES VALUES
  (1, 'Holly', 'Foster');
  
  INSERT INTO EMPLOYEES VALUES
  (2, 'Robert', 'Combs');
  
  INSERT INTO EMPLOYEES VALUES
  (3, 'Harvy', 'Lambert');
  
  INSERT INTO EMPLOYEES VALUES
  (4, 'Sarah', 'Miller');
  
  
  INSERT INTO STAFF VALUES
  (001, 1, '9992221234', 'ADMIN');
  
  INSERT INTO STAFF VALUES
  (023, 2, '9992226789', 'SEC');
  
  INSERT INTO STAFF VALUES
  (006, 3, '9992223456', 'TECH');
  
  INSERT INTO STAFF VALUES
  (011, 4, '9992223535', 'HR');

  Your function does not much sense in my opinion.

  You have these variables to input emp_ * and staff_ * that you concatenate in an emp_information of VARCHAR2.

  Then you try to SELECT those variables based on the query in the function (which is not allowed by the way) entry.

  You probably want something like this I guess:

  CREATE OR REPLACE FUNCTION emp_status (staff_id IN NUMBER)
  RETURN VARCHAR2
  IS
          emp_information VARCHAR2(80);
  BEGIN
          SELECT employees.e_first || employees.e_last || ' has rank of ' || staff.s_rank
          INTO    emp_information
          FROM    Employees
          ,       Staff
          WHERE   STAFF.S_ID = staff_id
          AND     EMPLOYEES.E_ID = STAFF.E_ID; 
  
          RETURN emp_information;
  END;
  

  Your original code does not include a JOIN with the STAFF table I added.

  However, in reality you do not have a function at all. you could just do the following:

  CREATE VIEW EMP_INFORMATION_VW AS
          SELECT  staff.s_id
          ,       employees.e_first || employees.e_last || ' has rank of ' || staff.s_rank AS     emp_information
          FROM    Employees
          ,       Staff
          WHERE   EMPLOYEES.E_ID = STAFF.S_ID;  
  

  Then, you could do:

  SELECT EMP_INFORMATION FROM EMP_INFORMATION_VW WHERE S_ID = :STAFFID
  

  HTH!

• Get the error: DROPDOWN list is not a function - works in IE9

  I'm trying to remove the default selected value in a drop-down list.

  The call to the function is the following:
  OnChange = "JavaScript:Remove_Default_Value (this); »

  Here's the function:

  function Remove_Default_Value(DROPDOWN) {
   var i = DROPDOWN.options.length - 1;
   for ( i; i >= 0; i--)
   {
    DROPDOWN(i).defaultSelected = false;
   }
  } 

  The error I get is "drop-DOWN list is not a function".

  Any ideas is greatly appreciated.

  It is not a function, but a table and you also use getElementsByTagName()

  function Remove_Default_Value(DROPDOWN) {
   var i = DROPDOWN.getElementsByTagName("option").length - 1;
   for ( i; i >= 0; i-- )
   {
    DROPDOWN.getElementsByTagName("option")[i].defaultSelected = false;
   }
  } 

  A good place to ask for advice on web development is to the 'Web Standards Development/evangelism' MozillaZine forum.

  • http://forums.mozillazine.org/viewforum.php?f=25

  Aid to this forum are better informed on issues related to web development.
  
  You must register on MozillaZine forum site to post in this forum.

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.

• Why the HTTP become function returns the error code 63?

  I tried to use the get HTTP function to get the XML file is returned by the api Google MAPS distance-matrix. I got the right answer if I insert the url directly in the browser, but using the get HTTP function, it returns the error 63, why?

  This is my code (the VI is developed on LV2011).

  I guess, the VI GET for use with LabVIEW Web Service, only not to get of the Internet pages.

  Using the simplest way:

  

  Andrey.

• Error when you try to call the Javascript function in the ActiveX Web browser

  I have a requirement to call a Javascript function in a web page that is displayed in the browser's ActiveX control.  I have the control on the front panel, and I use the Navigate method to call to the top of the appropriate page.  Based on an example, I found, I'm trying to get a reference to the HTML Document so that I can then get a reference to the Fenetreparent.  There is a method of the HTML Window object called execScript who I'm calling.  See the attached image of the code (reference close calls do not appear, but when I run it, they are there).

  I can't the node property that returns the parentWindow reference.  The error I get is the following.

  Error-2147467262 LabVIEW: (Hex 0 x 80004002) No. taken such interface supported.

  Any ideas on where to go from here?

  

  Hello

  I have reproduced the issue and the error you are seen and tried to understand what is the solution.

  It seems that the problem is with getting the pointer to the parentWindow.  From what I read on MSDN, it's maybe a limitation in the use of an ActiveX control in LabVIEW. It seems like Internet Explorer creates the object of the window, and so opening in one ActiveX control you free access to this top-level object.

  Here could be workaround for javascript execution in your program:

  

  I would like to know if it works for you and if it will work in your program.

• Sims House Party, the installation program starts, then immediately closes, gives me the error "0 x 80040707 - call function DLL crashed: SORTS." PathGetSpecialFolder.

  original title: error number: 0 x 80040707
  When I try to install the Sims House Party, the installer launches and then immediately closes, gives me the error "0 x 80040707 - call function DLL crashed: SORTS." PathGetSpecialFolder.

  According to the compatility of Windows 7, the House Party is compatible under 64-bit and 32-bit Windows 7. I tried to install it on another computer running Windows 7 32 bit and the error does not occur.

  I am running Windows 7 Professional 64 bit.

  Looks like that method 1 solved my problem.  Normally, I would get this message several times a day.  For more than 3 hours I applied the method 1, and the error has not appeared again.  Thank you very much.

• Why do I get error 200524 for the generating function 2 code example?

  I get the following error message:

  Error-200524 occurred at the generating function 2 channel_lv86.vi

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of channels of task: 1
  Number of data channels : 2

  Task name: _unnamedTask

  When I downloaded and ran the 2 channel here code: https://decibel.ni.com/content/docs/DOC-3545

  I have a card pci-e DAQ 6259 and a block BNC-2110

  Why I get this error?

  When I open the VI I selected ' Dev1/ao"under physical channels. I tried all the other options (a0 - a3) which gave the same error message.

  If you have 2 channels in your data (as indicated in the error message), then you must choose 2 channels in your task control (the error message says that you have selected only 1.)

  You saw in the example how they were able to identify the 2 channels of analog output?

• 'Require the error' try to call reverse geocoding function of geo_search.h

  
  I am trying to create an additional function in an existing extension using WebWorks 1.0.4.11.

  The function is geo_search_reverse_geocode in geo_search.h

  For now I'm just using the code example in the documentation on this function.

  http://developer.BlackBerry.com/native/reference/core/com.QNX.doc.Geolocation.lib_ref/topic/geo_sear...

  So therefore, my code looks like this.

  /**
   * Test Function to performs a reverse geocode lookup.
   */
  string TExtn::performReverseGeocode(const char* handle) {
  
      string result = "";
  
       geo_search_handle_t handle_t;
       geo_search_error_t error = geo_search_open( &handle_t );
       if ( error == GEO_SEARCH_OK ) {
         geo_search_reply_t reply_t;
  
         // for now, use the location in the example.
         double lat = 39.8017;
         double lon = -89.6436;
  
         error = geo_search_reverse_geocode(&handle_t,
                                            &reply_t,
                                            lat,
                                            lon,
                                            GEO_SEARCH_BOUNDARY_CITY);
         if ( error == GEO_SEARCH_OK ) {
  
               // do something with the results in the search reply
               result = decode_reply( &reply_t );
           geo_search_free_reply( &reply_t );
  
         } else {
             result = "unknown";
         }
         geo_search_close( &handle_t );
       }
  
       return result;
  }
  

  Before adding this feature, the extension causes no problems in my webworks app.

  Now that I've added the function call, I get this message that appears when running my application webworks.

   

  Need error cannot find /usr/lib/webplatforms/plugins/jnext/libTJNext.so library cannot be found

   

  * edit: libTJNext.so is the name of the shared object containing my extension.

  I use the same build scripts, and if I comment my changes to my hpp/CPP files, extension begins to work again (but without the support of geocoding).

  I hope that the message itself is a herring-saur, as the so is included in the file of the bar (I checked), so I expect to be installed when I install the application.

  What I am doing wrong?

  Yes, the message is a red herring. As a general rule, if the system cannot load a .so due to a connection problem, it shows the error. Have you noticed on the documentation of the API that it uses this library: libgeo_search?

  This library must be added to your project in order to to use. Without it the binding will fail and you will get this message.

  The process of adding that is documented here: https://github.com/blackberry/WebWorks-Community-APIs/tree/master/BB10-Cordova/Template#including-li...

  This section of the manual applies to extensions times WebWorks 1.0 and 2.0 WebWorks, although a large part of the rest of this file applies only to the WebWorks 2.0.

• Why 2 vo iterators do not function correctly on the same page? As my pic describes the error.

  Mr President.

  I have 2 iterators vo but that one iteration and second function does not work.

  

  How to check it where is the error.

  Concerning

  Check

  2. emptyText = "#{bindings." SupplierView1.viewable? "{'No data to display.': 'Access Denied.'}".
  3. fetchSize = "#{bindings." SupplierView1.rangeSize}"id ="lv2"selection ="unique. "
  4. selectionListener = "#{bindings." CustomerView1.treeModel.makeCurrent}.
  5. selectedRowKeys = ' #{bindings. " CustomerView1.collectionModel.selectedRow}">

  You use the view of providers like selectionlistener customers perspective?

  This is the reason for the behavior you're seeing.

  Timo

• JavaScript exception: error calling the selection function: TypeError: $(...). museMenu is not a function

  Since the update, one of my sites is weird. When you open the Web, that's what he said, "JavaScript exception: error calling the selection function: TypeError: $(...).» museMenu is not a function ". The site is www.hibiscuscuisine.com. If someone could help me understand this point, I would really appreciate it. Thank you

  Hello

  Please follow the complete instructions mentioned in this post - MuseJSAssert: error calling the function switch: TypeError: .museMenu $(elem) is not a function by Zak.

  Let me know if it works

  Thank you

  Ankush

• How to deal with the error "failed to get the kernel function pointer".

  I was running smoothly first Pro CC all day today. I stopped at the end of the day and now when I try to launch first yet, only a few hours later, the program will not open and I get the error "unable to get the kernel function pointer.  Help!

  I run first on a Macbook pro i5 processor at 2.3 Ghz with 16 GB RAM, graphic card 512 MB intel HD 3000 running OS 10.10.3.  It worked well (although sometimes a little slowly) for one year. I keep the project file on the portable hard drive, media files on a port firewire 800 Gdrive.  It has been working well.

  The only thing that happened between the first success today and refusal to open the first tonight, I ran something of card/holiday calendar interactive multimedia for my son that I had installed a few days ago but not yet opened. When he installed Abobe AIR opened and did the installation.  To see if this can help, I uninstalled the holiday card and rebooted the computer a couple of times. No dice.

  Help!  Luke

  I have the same problem on several machines. What seems to be the case is first is losing track hence basic audio filters are on the system. The only solution that works for me is uninstalling first, then put it back. I found myself to do this every day or almost.

• The 193 Win32 API error. Cannot call the C function: private_load_AgCoreTest

  Hi guys,.

  When I try to run Lightroom, I get the following error messages:

  • Win 32 API error 193 ("(erreur inconnue)" ") when you call: load the getCFunction library
  • Cannot call the C function: private_load_AgCoreTest

  So I can't access my library or to make a new library by importing files.

  I run it on a laptop with Windows 10 64-bit, Nvidia GeForce 850 m GTX and a processor Intel Core i7 with 12 GB of RAM and a 500 GB SSD (Samsung 840 EVO). All with the latest drivers.

  I tried already to unninstall and reinstall the program, all my packages of Visual C++ and the dll. I also already checked my permissions for the folder from catalog and granted full access. I also tried to run Lightroom as administrator.

  None of these solved the problem.

  What should I do?

  According to the notes, they followed the instructions here to fix the problem: error: "unable to start correctly (0Xc000007b)"

• PS elements 11 cannot use the text function. Error message could not initialize the text.

  When I try to use the text function the letters do not appear. Text feature appears frozen. Get the error message - unable to initialize the text.

  Recently PSE11 uninstalled and reinstalled. Downloaded 2 Google font. Was able to use the text function with Google fonts with no problems. Two days later, attempted to work with the text function and the typed letters appear on the screen/layer. Tried to add the text with fonts pre-installed PS - still once, no text appeared. Impossible to set up a text box. How can I fix it? Thank you

  Suggest that you reset the text tool, that only he can fix.

  I believe in PSEv.11, there is a small arrow, top of the page to the left on the tool options bar. Click on this.

  If the arrow is not there, look in the options bar to the text tool, on the right, for a box with lines inside. Adobe changed the location and icon in later versions of the program.