Successful installation of the reader is not successful

Similar Questions

• Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Hello

  I will need to know the brand and model of the device in order to help you solve it.

  You see the device listed in the Control Panel, hardware and sound, scanners and cameras?
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: The system does not meet the installation requirements. the software does not support this versio

  1 LASERJET PRO CP1525nw

  2. Windows XP

  3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.

  4. no change

  Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.

• I just installed for CS5 and my option for installation of the shares does not... How to install?

  I just installed for CS5 and my option for installation of the shares does not... How to install?

  I'm just not my palette actions checked.  Fact.  Thank you.

• HP solutions Center can not run because your installation of the device is not full (Windows 7)

  I downloaded and tried to install HP Photosmart C309a all-in-One Driver Software 14.0 Rel.5 in a new installation of Windows 7 Professional (not an upgrade). Installation works very well until the moment of the connection to the printer.

  I tried the wired and wireless network connections. The screen "Found network printers" lists the printer with the correct IP address and MAC address. Network Diagnostics screen shows any errors. The screen "Installation of your printer" poster "Detected printer", then says "printer setup has failed to complete." Retry does not help. Removing and reinstalling the software do not help.

  The Windows devices and printers control panel shows the printer as "Series of HP Photosmart C309a (redirect 2)". I am able to print a Test Page from Windows printer without error. The 'print options' are also available.

  The printer works fine with other computers on my home network, one running XP and a Vista running.

  How can I get the software installation to complete successfully and provide the printer the HP Solutions Center?

  Thanks for your help.

  Well, I have solved my problem. I'm not sure that these steps are necessary, but here's what I did.

  1 follow the instructions in "Completely uninstall and reinstall the HP software" HP. In particular, 'clear the temporary files and folders' and 'Disable Terminate and Stay Resident (TSR) programs and any other lighting programs' before reinstall you, then "Reactivate startup programs", after the reinstallation.

  2. install base drivers, and NOT the complete software package with applications.

  3. If the basic install works, then install ALL the applications (eg Solution Center). Do not try to install some applications but not others.

  4 remove the applications that you do not (e.g., Online Shop).

  Maybe the steps 2-4 are not mandatory, but they worked for me.

• Fix installation problem: "the update does not apply to your system.

  Greetings and thanks for reading.

  Currently, I am trying to fix a problem of high performance mouse. During the game, the mouse staggers moving (or 'looking', through the mouse) left or right . I tried two different mouse and the problem persists. The mice and their software, both work fine when connected to an XP system.

  By raising the solution, I found this support page that seems to match symptoms more than all other pages (with the solutions, I have already tried) I found: http://support.microsoft.com/default.aspx/kb/932653/en-us?p=1

  The page suggests that a service pack must be installed (already done) and otherwise, to try a fix .

  I got the patch in question, but when trying to apply the patch I am presented with an error message:

  "The update does not apply to your system."

  I understand that this question would happen if I had chosen the bits bad operating system (I chose x 86 for my 32-bit system, rather than the x 64 bit), but I chose the right bit system.

  I wonder how do I overcome this problem during the installation of the hotfix.

  I want to emphasize: I updated all drivers for the system (I had to shell out money for a driver update program because you are looking for that many drivers manually is virtually impossible), including the specific software for the mouse, the firmware of the mouse... None of them solved the problem. This fix may be my only remaining option to fix this mouse and I am unable to continue without help.

  Kind regards
  Luke

  mousesupport12345,
  Please post with the information requested here: what to post in the Windows Update forum

  Explain when you experience the problem.  It is only in the games?  If so, is it all games or only some of them?

  Clean boot your PC then test the mouse and see if the problem persists.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP SP1 installs because the server is not responding

  My wife has just died so I used the restore cd provided with his old office xp emachines to get rid of all the files to give to his grandson directed.

  Today, however it will be not updated. I tried to install SP1a that fails because the server does not and SP2 that s just a txt file.

  Anyone got any ideas how I can go back to SP3 on the computer?

  It is 32-bit and is not too powerful but BIF run before SP3

  My condolences.

  If the restore CD you have to sp1, you need not sp1a or sp2.  You can go directly to sp3.  SP1a is the same as sp1, but the removal of the "Microsoft Java Virtual Machine (JVM from MS).  Microsoft released XP sp1a as part of a settlement with Sun Microsystems patent infringement (then owner of Java).

  First read this: https://groups.google.com/forum/?fromgroups=#! msg/microsoft.public.windowsxp.general/quMfqk8Eb94/K93XrUGuZqAJ (if you do not want a click, the text is reproduced below):

  HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  1. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  [Yes, you can jump SP2 if you run WinXP SP1.]

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  Other references:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.

  Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  5 steps to help protect your new computer before going online
  [installation clean = new computer]
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Measures to help prevent spyware
  http://www.Microsoft.com/protect/computer/spyware/prevent.mspx

• Windows Update Standalone Installer returns "the update does not apply to your system" Installer MSI 4.5 [KB942288]

  MSI 4.5 is required to install some software on the sub system, Setup MSI 4.5 returns "the update does not apply to your system.

  Windows Server 2008 SP2 64-bit Standard

  sfc/scannow does return no problem

  CBS. JOURNAL

  2011-11-10 09:19:30, v6.0.6002.18005 Info CBS responsible Servicing Stack with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\cbscore.dll
  2011-11-10 09:19:30, called CSI Info 00000001@2011/11/9:22:49:30.113 WcpInitialize (wcp.dll version 0.0.0.5) (battery @0x7feef748c85 @0x7fef2ef53ae @0x7fef2ec3ed1 @0xffb649a8 @0xffb630c9 @0xffb63578)
  2011-11-10 09:19:30, CBS News could not load SrClient DLL path: C:\windows\system32\srclient.dll.  Continue without the system restore points.
  2011-11-10 09:19:30, called CSI Info 00000002@2011/11/9:22:49:30.116 WcpInitialize (wcp.dll version 0.0.0.5) (battery @0x7feef748c85 @0x7fef2f386cf @0x7fef2f125d9 @0x7fef2ec3feb @0xffb649a8 @0xffb630c9)
  2011-11-10 09:19:30, called CSI Info 00000003@2011/11/9:22:49:30.117 WcpInitialize (wcp.dll version 0.0.0.5) (battery @0x7feef748c85 @0x7fef74f838d @0x7fef74f84ba @0xffb64207 @0xffb63125 @0xffb63578)
  2011-11-10 09:19:30, CBS NonStart info: check to ensure the treatment of start-up was not necessary.
  2011-11-10 09:19:30, info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x12df8d0)
  2011-11-10 09:19:30, CBS NonStart info: success, start, treatment not required, as expected.
  2011-11-10 09:19:30, info CSI CSI 809616 (0x00000000000c5a90) store initialized 00000005
  2011-11-10 09:19:30, CBS briefing: initialized 30187313:3612201472.
  2011-11-10 09:19:30, CBS information session: 30187313:3612201472 finalized.  Reboot required: no
  2011-11-10 09:21:33, CBS Session info: initialized 30187314:546129020.
  2011-11-10 09:21:33, CBS Session info: 30187314:546129020 finalized.  Reboot required: no
  2011-11-10 09:23:35, CBS Session info: initialized 30187314:1775756314.
  2011-11-10 09:23:35, CBS Session info: 30187314:1775756314 finalized.  Reboot required: no
  2011-11-10 09:25:38, CBS Session info: initialized 30187314:3005403140.
  2011-11-10 09:25:38, CBS Session info: 30187314:3005403140 finalized.  Reboot required: no
  2011-11-10 09:27:37, CBS Session info: initialized 30187314:4186893820.
  2011-11-10 09:27:37, CBS Session info: 30187314:4186893820 finalized.  Reboot required: no
  2011-11-10 09:27:43, CBS Session info: initialized 30187314:4247657872.
  2011-11-10 09:27:43, CBS Session info: 30187314:4247657872 finalized.  Reboot required: no
  2011-11-10 09:29:30, CBS info trap: package store indicates there is no element to clean, to jump.

  Advice please.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope that helps.

• I tried Skype download, message "script required to complete installation of the toolbar could not be run" came. Mine is Windows XP Pack 3

  I was using Skype with no problems, all of a sudden, everything was still, I finally had to restart the computer, uninstalled Skype, I tried downloading Skype again, uninstalling the toolbar was not possible, "required to complete the installation of tool bar script could not be run"message came.  And so was to uninstall the toolbar also.  Mine is version 5.1 Windows XP Service Pack 3.  Help, please

  The instructions should be essentially the same except that you don't have to run as administrator command prompt.

  Then register the VBScript.dll file which as explained above.

  Let us know if that helps.

  Marilyn

• Installation of the OS is not REC my hard drives.

  Hello

  Computer - XPS/Dimension 400/9150

  IM setting this computer for a friend and the HD does not so I bought a new segate 500. I'm going to load XP 32-bit SP2 on the system, and I get this screen after pressing enter on the first page to the configuration screen.

  "The installation program found no hard disk units installed on this computer" is also a paragraph that the hard drive is connected properly, and believe me, it is.

  He gave me an option on this screen and is to press F3.

  Note - Bios reconizes the drives very well.

  Note that I also tried the 64-bit version of too. (to check)

  Thanx, hams

  
  

• Complete installation of the driver does not seem to take

  I have a HP5520 all in one. It was working fine a few days ago. It is used to open a screen on my computer when I click on the printer icon and asked me if I wanted to use USB or wireless. When I choose that I'd get another screen I think where I could choose to scan a document.

  A few days ago the icon to display the first screen where I select what USB or without wire would work, but when I select and click OK, nothing would happen. She would not open anything more. I was able to print again if I asked him to print something and that I could still scan if used a repair HP doctor program. In other words the doctor program go through tests and would say that everything was fine and then asked me if I wanted to do a test analysis. I could use this feature to scan test to analyze something.

  I downloaded and installed the full driver for HP 5520 package all in one several times this morning. It goes through the process of installation but then when I try to use the printer, for example, I go to START and click the 5520, it displays the dialog box indicating "install the HP printer.  The HP Wizard from the support page says that all is well. But it seems that now I can't even put this first screen that allows me to choose USB or wireless. It is not just open the program more on my computer.

  It will print if I choose to print something from the computer.  But it will not open the dialog box that allows me to access the scan feature.

  When I scanned a document to the screen on the printer itself, and I chose to scan my computer. He went through the scan function and I could see the document on the small screen on the printer, but it didn't pop up on the computer at all, so nothing I could do with it, as record or something.

  Help. I tried everything I can think of.

  Bill

  Hello

  Follow these steps to fix the HP software:

  http://support.HP.com/us-en/document/c03659948

  Then try to open the HP software and check any change.

  If the software is not yet launch after you complete these steps, install the following hotfix and check any changes:

  http://support.HP.com/us-en/document/c03640384

  Kind regards

  Shlomi

• installation in the root directory not allowed

  Exit code: 132

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 0 warning (s)

  FATAL: Installation in the directory root "is not allowed

  FATAL: An error occurred starting the installation with the error code '132'

  -------------------------------------------------------------------------------------

  Hi danl28541244,

  Please try to clean and reinstall the product, if it still fails check your installation connects.

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Troubleshoot installation with the log files. CS5, CS5.5, CS6

  Let us know if that helps.

• Installation of the elements will not accept redemption code

  Buy Photoshop elements 13 and when trying to complete installation, all upward will not allow me to enter the redemption code in order to get the serial number.  If the code entry of redemption in the capitals to match the cover of the CD or lowercase he always tells me that the code is not valid.  Also appears on the cover of the box, there is a serial number, but installation will not allow the entry of letters, numbers only.  Stopped the installation program, CD removed, rebooted and tried again with the same results.  I am trying to install on the HP Envy laptop.  Any solution?  Thank you

  Hello

  Please see redemption code help

  Otherwise, you will need to contact customer service

  Kind regards

  Sheena

• Speed dial installs, but the icon does not appear

  I used speed dial for a long time, both on my desktop and my laptop, and I really like it. Recently, I got a new office and installed the latest version of Firefox. Everything seems to be working well, but when I try to add Speed Dial, it appears to install correctly, but the icon does not appear in the menu bar. I tried several times and each time I like Speed Dial will be installed after I restarted Firefox. However, by clicking on the button will restart FF, but the icon never appears! What goes wrong, and how can I get Speed Dial to work for me, as it has always done?

  Dial manual > getting started - http://speeddial.uworks.net/gettingstarted.html (see paragraph beginning "when this extension is installed... »)

  • This is the same as the other buttons on the toolbar add - see: https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars#w_how-do-i-customize-or-rearrange-toolbar-items

  Complete manual of dial - http://speeddial.uworks.net/manual.html

• M40X-250: Installation of the OS does not work

  Hello

  I just tried to upgrade to a standard installation of XP Home Edition to a XP pro edition. When installing the note happens that the facility lacks a mass storage device driver. Later, when you restart the pc it does not get through the start-up phase. Bluescreen fraction of a second and it restarts give me mode without failure of the standard options - previous installation-... Option all lead to the same loop.
  So here are my questions:

  (1) is the HD a SATA drive and therefore not yet supported by Win XP pro (I couldn't find the exact specifications of the HD)
  (2) where can I find the drivers for this problem
  (3) is there a solution anyway...

  Any help is welcome...
  R
  PS. : Yes, XP pro is a legal full version...

  Hello

  As much as I know this laptop came with a HDD 60 common GB improved Interface (ATA-6). In this case you n t need to install all of the SATA drivers.
  In my opinion, it is another question.
  I think you should try to install the Chip Set Utility and other Hotfixes Microsoft. The best way is to install SP2. In addition, the Toshiba site, you will find a few patches. You must install these files in the order that is listed on the download site.

  Good bye