Successful lease IP, but ping failed and comms

Similar Questions

• I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A__

  I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A

  I have install the 2007 Microsoft Office Suite Service Pack 2

  I bet that if you check the size of the file that has been downloaded it will be probably very small, indicating that it was not downloaded correctly.

  I don't think you have another computer at hand, or a friend with a USB key which may be able to download and copy it for you?  Maybe burn it to a CD or something.

  I could download it and save it to my desktop so I am confident that it is not a problem with the link itself or the file is available for download with success.

  I know this isn't a very good suggestion, but the only other option would be to challenge support and see if a technician can take control of your machine and see if they can solve the problem of internet explore.

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9

  trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9

  Hi Pashley,

  I see you get error 0xc00000e9. I'll help you with this problem.

  1. What is the model number of the computer?

  2. you talk to re - load Windows Vista on Toshiba computer?

  3. How are you trying to re - load Windows Vista?

  4. when exactly you get this error message?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  You can also post this question in the Toshiba Forums: http://forums.computers.toshiba-europe.com/forums/index.jspa

  Thank you.

• DNS Broke - nslookup successful but Ping fails

  Hello

  I'm working on an old client computer that is running Windows XP SP2.

  The computer is unable to connect because of a sort of DNS issue, so it appears.

  See, very strange:

  C:\Documents and c > nslookup digg.com

  Server: quarter - pri.sys.gtei .net

  Address: 4.2.2.1

  Non-authoritative answer:

  Name: digg.com

  Address: 64.191.203.30

  C:\Documents and c > ping 64.191.203.30

  Ping 64.191.203.30 with 32 bytes of data:

  Reply from 64.191.203.30: bytes = 32 time = 83ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 81ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 82ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 86ms TTL = 242

  Ping statistics for 64.191.203.30:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 81ms, Maximum = 86ms, average = 83ms

  C:\Documents and c > ping digg.com

  Ping request could not find host digg.com. Please check the name and try again.

  C:\Documents and c >

  C:\Documents and c > nslookup digg.com

  Server: quarter - pri.sys.gtei .net

  Address: 4.2.2.1

  
  

  Non-authoritative answer:

  Name: digg.com

  Address: 64.191.203.30

  
  

  
  

  C:\Documents and c > ping 64.191.203.30

  
  

  Ping 64.191.203.30 with 32 bytes of data:

  
  

  Reply from 64.191.203.30: bytes = 32 time = 83ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 81ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 82ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 86ms TTL = 242

  
  

  Ping statistics for 64.191.203.30:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 81ms, Maximum = 86ms, average = 83ms

  
  

  C:\Documents and c > ping digg.com

  Ping request could not find host digg.com. Please check the name and try again.

  
  

  C:\Documents and c >

  So, as you can see the GET from the computer to the correct IP address for any domain using nslookup, but trying to ping or access any domain name instantly fails. :(

  Tried to run winsockxpfix, but that made no difference.

  Also, I tried using the service DNS, open dns but same problem.

  The computer is connected to my knowledge as work network. 7 other computers and two xbox 360 s on the network even get very well correct dns data. So it's fair to this computer.

  Even tried to install BIND 9 on the PC and the same problem. :(

  Thanks for the help,

  Will be

  God Bless America

  I fixed it by managing to install SP3. Just so install SP3 for XP fixed the problem. : D

  And Yes Ben, I tried that too. At a rating of 1. Thank you for trying to help though.

  God Bless America

• nslookup works, but ping fails by hostname (works of intellectual property). IE cannot display this webpage. Help, please!

  Cannot access Internet on my laptop with Windows XP SP2 installed; uninstalled firewall; Microsoft Security Essentials (AV) installed

  ipconfig/all shows a 192.168.x.x ip address to my ethernet card.

  TCP/IP properties are set to "Obtain an IP address automatically" and "Obtain DNS server address automatically."

  I am able to search names and ping by ip address but cannot ping by hostname. When I try to navigate through a Web site, it displays the message "Waiting for http://xxx.xxx.xxx ' in the status bar, but fails to load the Web page.

  I tried a few sites by their IP with the browser, for example 212.58.244.143, and IE was able to load the Web page (without any objects of course requiring name resolution).

  Able to ping loopback (127.0.0.1) as well as the computer by its name (which resolves to the ip address is assigned to the).

  ARP - a shows the entrance to the default gateway. Able to ping.

  I did ipconfig/flushdns and / registerdns without effect.

  Even with net stop dnscache and net start dnscache.

  Manually reset TCP/IP too by following the instructions here.

  Also used "netsh winsock reset catalog" according to the guideline here.

  Running out of ideas here... could someone please advise what to do? Or what additional information it would take to solve this problem?

  I met the same problem on win7. I also tried each solusion what you tried.

  In the end, I reinstalled the tcp/ip stack and solved this problem. Try the following steps:

  1 remove

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

  2 reset

  3. right click on the network connection and then click Properties. Reinstall the protocols of the disc. The location is 'C:\Windows\inf '. Choose the «ipv4...» "and"ipv6 ".

  4 reboot

  Everything is ok.

  Good luck!

• tried to install snow leopard 10.5.8 but he failed and restarted now, I can't start 10.5.8

  I purchased mac snow leopard and tried to install it on my mac-pound aluminum end 2008, it could not install, I clicked on try again, then it restart it. It came with the screen of the language and I thought it was the clean install the way to do it, but I don't want TO REMOVE MY DRIVE because the memories of family, so I have snow leopard of ejection and tried to boot the system back to 10.5.8 but that did not work, it just turned off, so my question is is it possible to install mac snow leopard without deleting all my files, if not any other way to get all the files safe again. Please and thank you. I didn't backup:

  Oh yes and I checked the disk on boot disk utility and nothing on my drive has been deleted and yet if...

• Need to install KB947821 update but fails and displays the error 9370001 code

  You will need to install KB947821 update but fails and displays the error code 9370001.  Does anyone have a solution?

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I previously registered for upgrade offer and received the coupon code but has failed can I take advantage of the offer now

  I previously registered for upgrade offer and received the coupon code but has failed can I take advantage of the offer now

  If you don't have the product key, then sorry, too late, you can simply buy it now.

  http://www.Windows.com/buy

• What does a message stating that AMD driver has failed and recovered display mean successfully?

  Mr President.

  When I changed the wallpaper of my HP G6 2231tx notebook, a message indicating that "AMD display driver failed and recovered" appeared recently and my display freezes for a few seconds. Is this some kind of hardware problem. And mine is a new machine. Will this problem persists. Is there a cure for this kind of questions.

  Unfortunately, this is a normal phenomenon on virtually all Windows desktop computers and laptops with modules and Radeon HD graphics cards. This means that the driver has crashed, but the operating system he recovered and it works again.

  Yes, it will never happen. I recommend you keep an eye on the pilot of the AMD graphics driver download section in the web portal for your laptop support for updates.

  You can also just run the application development in demand for support from HP a month. The HPSAwill advise you if there are updates available and help you install them.

• Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there an access

  Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there access to the 4.1 just uninstall and fresh install 4.4 from the site?  Is the problem 4.1 and 4.4 no longer supported?

  You can download LR 4.4.1 including the latest update here:

  https://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Uninstall the current version of LR, you have it installed, download LR 4.4.1 installer and install it. I don't know what causes your problem with the update, but that a full installer for 4.4.1 can operate without any problems.

• He repeats to me update failed and he said photo shop is installed, but does not appear when I search for it, how can I fix

  He repeats to me update failed and he said photo shop is installed, but does not appear when I search for it, how can I fix

  Nevermind I figured it

• I migrated my Macbook pro to an Imac Photoshop works very well, but CC says that there is a problem. It tells me to download CC but when I try to install it fails and tells me that I need CC?

  I migrated my Macbook pro to an Imac Photoshop works very well, but CC says that there is a problem. It tells me to download CC but when I try to install it fails and tells me that I need CC?

  Migration/transfer of Adobe applications does not work.  You must install using installation files.  Uninstall, and then use the CS cleanup tool.  Then download/install the desktop application, connect and install applications subscription.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Help of activation & deactivation
  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• Cant unninstall lightroom 5.4 required to install update 5.5, I remove all the files and registry, but install fails

  Cant unninstall lightroom 5.4 necessary to install update 5.5, I remove all the files and the registry, but installation fails again and again, now I can't use lightrrom... Grins.

  I use the SSD drive and I can't have a lot of file uninstal (often having to clean disk)

  Thanks for help

  Hello Jeff,.

  Thank you very much for your reply, I use windows 8.1! I found the problem: to install the new version installation needs the program old installation (but I have remove all the installer, because they use a place a lot on hard drive (SSD)).

  I have uninstall all Adobe and reinstalled, I save the full installer on an external drive. When the installer asked the former installer I indicate to programm my drive external and everything works fine now.

  Thanks so much for your help, I just do not delete the old file (sad having to save old installler just to install the new).

  Wallie

  (Sorry my English)

• I tried to download DirectX on my desktop but the download failed and I got error S1023

  I tried to download DirectX on my desktop with Win XP.  The download failed and I got the S1023 error message.  Now what should I do?  I need the download.

  Original title: download DirectX issue

  Delete first upward your Temp File/Cache.

  http://winhelp2002.MVPs.org/delcache.htm>

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  Better and easier to use - CCleaner.

  Download the basic build (Slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (Slim) does not contain the toolbar disgusted

  Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.

  Reset

  How to determine the version of DirectX using the DirectX Diagnostic tool

  http://support.Microsoft.com/kb/157730>

  How to download and install DirectX

  http://support.Microsoft.com/kb/179113>

  UTC/GMT is 00:04, Monday, June 11, 2012

• Virtual MACHINE is unable to ping host and vice versa

  It is a very strange problem.  VMWare support tried to understand this output as Dell.  So, I just throw it to the community to see if anyone else has experienced this problem and may have a solution.  I have 3 identical Dell R720 servers.  2 work with no problem, but 1 (let's call it vm8) gave me problems since day 1.  Reference verified Dell equipment today and has updated me the BIOS, firmware and drivers on vm8, which did not solve the problem.  VMWare technicians checked each parameter network in recent weeks and currently, they are not the cause.

  VM8 have ESXi installed 5.5.0.  The Server 4 has 2 NICs with 4 ports each.  Current configuration is vmnic 0-3 is connected to our LAN, 4-5 on our DMZ and 6-7 in our SAN (iSCSI). The AP will go up and down because VM8 loses connectivity to our isolation address (gateway).

  VM8 (Mgmt IP network is 172.20.100.9) has only 1 VM (172.20.100.40). Same subnet (255.255.255.0).  .9 happens to ping expiration.40 using vmkping.  When I ping.9 de.40, the first package gets a quick response, then all following packets timeout.  According to VMWare, when you ping in (VM to host) it does not go out through the card physical network to the physical switch.  Everything is internal with vmnic and vSwitch.  When I ping my gateway (172.20.100.1), the ping is successful.  When I ping.9 from my workstation, the first packet times out, then answered the following packages.  It is the exact opposite of ping the virtual computer.

  Here's a better ventilation-

  .9 VM8 host

  .40 VM on the host VM8

  .1 gateway

  .122 workstation over LAN

  .25 vRanger connection (physical server on LAN)

  Ping

  .9 40 (100% packet loss)

  first package de.40 a.9 (75% packet loss) Gets the response, then 3 timeout

  .9 a.122 good ping (0 packet loss)

  .122 a.9 (0 packet loss) good ping

  vmkping (75% loss).9 a.25 does not appear each packet that it is sent.  But other results, can I assume first package times out.

  first package de.25 a.9 (75% loss) has expired, the following 3 got a response

  .40 a.122 good ping (0 packet loss)

  . 122. 40 (100% packet loss)

  The 3 can ping a.1 (every 20 minutes on VM8 I get a "vSphere HA agent on this host failed isolation address 172.20.100.1"

  Also, throughout the day, I get the message - "vSphere HA agent on this host cannot reach some of the management of the addresses of network of other hosts, and HA is perhaps not able to restart the virtual computer if a failure of the host is displayed."  I came to work in the morning, and all my VMS on VM8 migrated to my other 2 hosts.  My backups don't work on VM on VM8.  I use vRanger connection and when I ping connection vRanger VM8 (physical server), the first package expires and the following packages get a response.  Then, when connection vRanger goes to back up my VM, runs aground due to loss of original packet.

  These are things I've already tried.  I tested individually each physical NETWORK adapter.  I removed all the ports on the two NIC to try to isolate a specific port. All the 4 vmnic is active adapters in network properties NIC Teaming management and I moved each vmnic individually to unused to test each port.  I replaced the Cat6 cables.  I used different Dell switches and various ports of the switch.  I even swapped the switch ports that host another employee, exclude a switch port configuration problem. In addition, port security is disabled on the ports.  I upgraded ESXi 5.5.0 to a newer version.  There is a known issue with the tg3 driver, which I've updated to the latest version without problem.  I also used tg3 workaround by disabling NetQueue.  And we do not use of VLAN. Dell technical support says that it is not a hardware problem and thinks it's a matter of layer 2, but does not know where.  Basically, it's an internal problem (meaning strictly on VM8) with vSwitches or vmnic or it's a material gremlin in our Dell R720 box.

  The final recommendation of Dell is to blow the ESXi server and install a clean copy.  It's extremely frustrating and I'm out of ideas.

  Thanks in advance.

  Any luck that you have an IP address that is duplicated on your network?