DNS Broke - nslookup successful but Ping fails

Similar Questions

• nslookup works, but ping fails by hostname (works of intellectual property). IE cannot display this webpage. Help, please!

  Cannot access Internet on my laptop with Windows XP SP2 installed; uninstalled firewall; Microsoft Security Essentials (AV) installed

  ipconfig/all shows a 192.168.x.x ip address to my ethernet card.

  TCP/IP properties are set to "Obtain an IP address automatically" and "Obtain DNS server address automatically."

  I am able to search names and ping by ip address but cannot ping by hostname. When I try to navigate through a Web site, it displays the message "Waiting for http://xxx.xxx.xxx ' in the status bar, but fails to load the Web page.

  I tried a few sites by their IP with the browser, for example 212.58.244.143, and IE was able to load the Web page (without any objects of course requiring name resolution).

  Able to ping loopback (127.0.0.1) as well as the computer by its name (which resolves to the ip address is assigned to the).

  ARP - a shows the entrance to the default gateway. Able to ping.

  I did ipconfig/flushdns and / registerdns without effect.

  Even with net stop dnscache and net start dnscache.

  Manually reset TCP/IP too by following the instructions here.

  Also used "netsh winsock reset catalog" according to the guideline here.

  Running out of ideas here... could someone please advise what to do? Or what additional information it would take to solve this problem?

  I met the same problem on win7. I also tried each solusion what you tried.

  In the end, I reinstalled the tcp/ip stack and solved this problem. Try the following steps:

  1 remove

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

  2 reset

  3. right click on the network connection and then click Properties. Reinstall the protocols of the disc. The location is 'C:\Windows\inf '. Choose the «ipv4...» "and"ipv6 ".

  4 reboot

  Everything is ok.

  Good luck!

• Successful lease IP, but ping failed and comms

  I run a network of 2 PC's at home. The two PC is running XP. I had successfully this network running with ICS for about 1 year. Due to performance issues, I decided to format the PC host. No hardware changes were made, but I load the updated drivers for all devices (including NIC - Intel Pro 100) on the formatted PC. Since the charging I can't do a ping between 2 PCs. The loop back Ping works fine on both PCs. What is really disconcerting is the fact that by using the ipconfig/all command, I see that the client PC rents successfully a new IP address of the host, but still there is no communication and ping fails. I ran several times in the Configuration Wizard from the network on both machines using different computer names (and even change the name of working group) of force to renew the connection. Whenever I see that the customer is to successfully get a new host IP lease, but always communication and ping is not available. I use AVG free edition and Windows Firewall. I also disabled the Windows Firewall on both machines, but it made no difference. I tried to put the customer on a fixed IP (192.168.0.2), but that also doesn't solve the problem. I am out, please help.

  Thanks for the reply, but the problem was resolved last night. I uninstalled the Intel driver for the NETWORK card and reinstalled an old version that I had on the disk. This instantly solved the problem, so I can assume there is a problem with the latest Intel driver. Thanks again.

• Update KB268509 downloads successfully, but installation fails

  Update KB268509 downloads successfully, but the installation always fails. There is no error message

  I use XP Home edition V 2002 SP3.

  Other updates install OK.

  I noticed another user on this installation failure, but evokes a keyboard log failure:
  "How can I install Kb2686509 I fauktykeyboard.log text with Kbd101.dll Kbd101a.dll.

  Please note, I do NOT have this message, but a recommendation has been to check some registry entries. I have an entry "scancode map".

  I don't know if the update failed, it's something to do with keyboards, (if I don't get this message) but I have installed a remapper small keyboard, InchWest MapKeyboard 1.2. I use it to remap the key insertion for people with reduced mobility. I also have the UK English keyboard as my default expanded.

  Hello

  I thank very you much for coming back to us.

  I suggest you to please follow the steps of the below mentioned article and check if it helps.

  "What should I do if the installation of this update fails with the error"0x8007F0F4 "?

  http://support.Microsoft.com/kb/2686509

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  You can also check the below link has been made to the same question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/security-update-kb2686509-will-not-install-error/1df6306a-1BB1-47ac-941b-5779415b2e95?page=1&TM=1341461353268

  I hope that helps!

• VPN users 5110 ASA - DNS works do not, but all pings ok

  So we have set up an ASA 5510 in no problem, users can VPN and an IPCONFIG/all confirms that the DNS server in Group Policy settings have been applied.

  Group Policy sets the DNS servers as 192.168.2.8 (internal), 8.8.8.8 (google).

  Public websites work well.

  Type nslookup opens Internet correct DNS server.

  but all requests for time-out.

  C:\Users\atr>nslookup

  Default server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  > w7farmm3

  Server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  Ask dell_server5.ourcompany.local expired

  > w7farmm3.ourcompany

  Server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  Ask dell_server5.ourcompany.local expired

  > w7farmm3.ourcompany.local

  Server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  Ask dell_server5.ourcompany.local expired

  > google.com

  Server: dell_server5.ourcompany.local

  Address: 192.168.2.8

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  DNS request timed out.

  wait time was 2 seconds.

  Ask dell_server5.ourcompany.local expired

  Any ideas?

  If it works with tunnelall and not with the split tunneling then you need to enable split dns.

  Your group strategy should something like this:

  internal vpnpolicyx group policy

  attributes of the strategy of group vpnpolicyx

  Split-dns value yourcompany.local

  I hope this helps.

• Installed PS CC (2015) twice on my laptop and got this message each time: Installation successful, but a patch has failed.  Learn more > download appears to be damaged.  Please try again (U43M1D204)?

  Installed PS CC (2015) twice on my laptop and got this message each time: Installation successful, but a patch has failed.  Learn more > download appears to be damaged.  Please try again (U43M1D204)?

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

  U43M1D204 - http://forums.adobe.com/message/4629442#4629442

• DLR ping fails

  I use 5.5 and nsx 6.1.4 esxi

  and 4 physical machines

  I have 192.168.10.0/24 and 2 sub net 192.168.0.0/24

  I use 2 physical switch each for 1 net sub but the switches are not connected

  a cluster

  OME controller

  all esxi are connected to the net with Teddy 2 sub 2

  1 VDS for the cluster

  virtual machines are simply windows.iso just to simulate network clients

  I have 4 virtual machines of windows

  VM1 and VMS 2 in esxi 3

  VM3 and vm4 in esxi 4

  VM1 and VMS 3 (10.1.0.0/24) network connected to logical switch 1

  VM2 in esxi 3 and vm in esxi 4 4 logged in LS2 (10.2.0.0/24)

  16GB in each machine

  I use windows server r2 2012 AD and DNS

  "I have congigured a DLR between LS1, LS" and transit LS

  but the ping fails between VMS in different subnet

  Anay idea?

  DNAT (Destination NAT) is required for http access to vm via a public IP address on the edge gateway ESG.

  This article on the DTA section explains the configuration steps. A Point to note is that for the feature NAT firewall must be enabled and a firewall rule for http public address must be entered.

  http://www.routetocloud.com/2014/12/NSX-v-edge-NAT/

  

• I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A__

  I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A

  I have install the 2007 Microsoft Office Suite Service Pack 2

  I bet that if you check the size of the file that has been downloaded it will be probably very small, indicating that it was not downloaded correctly.

  I don't think you have another computer at hand, or a friend with a USB key which may be able to download and copy it for you?  Maybe burn it to a CD or something.

  I could download it and save it to my desktop so I am confident that it is not a problem with the link itself or the file is available for download with success.

  I know this isn't a very good suggestion, but the only other option would be to challenge support and see if a technician can take control of your machine and see if they can solve the problem of internet explore.

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Updated repeatedly offered KB2686509 for Windows XP but it fails to install without any error/message code. Ideas?

  The analysis of windows update says that no critical updates are available.  However, Secunia scan says my Windows is vulernable because the security KB2686509 patch is not installed.  My tool bar constantly shows the yellow shield indicating that an update is available. When I click it, it initializes successfully but gives a message that KB2686509 has failed to install.  There is no other error code of the message on the nature of the problem.

  See the RESPONSE messages in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

• Once a day, I lose all network connectivity on my Windows XP SP3 laptop. When I try to ping something I get this error: "PING failed, error 1450' code"

  Hello, those in about 3 days, I lose network connectivity on my laptop with Windows XP SP3. When I ping no matter what page of the console I get the following error message: show PING failed, error code 1450. I tried to use the option of repair in my area, but it did not help. Computer restart resolves the problem, but I'd like to avoid doing. What should I do to solve the problem?

  original title: loss of network connectivity

  Since this happen in two different ISP, try to reset your modem or router and also contact your ISP support. Some ISPS will set a rule and limitation of their user, but in your case, discuss it with your ISP, or contact technical support for your PC manufacturer.

• Second laptop unable to connect; When trying to connect wirelessly, says connection is successful, but the Public unidentified network, no Internet.

  Hi all.

  I'm really sorry to post this question, I must have read 100 other threads on this topic, but none of the solutions seem to work for me.

  I have a home set wireless network in place, which may not have a lot of problems with it that I have a laptop W7 which has a perfect wireless connection, and also our TV connect when you want, as do our phones and Xbox.

  We bought a second hand Acer aspire laptop for our daughter. It is running Vista Edition family Basic. Even if she had the factory reset done on this, because we can connect to the router with an ethernet cable and it works very well, we managed to ensure that all updates of Windows etc are all complete.

  When trying to connect wirelessly, it says connection successful, but it is to a Public unidentified network, and there is no Internet. Also, even if it says Local access, we cannot connect to the router settings page is.

  I have uninstalled and reinstalled the built-in wireless adapter and updated the driver to do this, he says that he is as up-to-date as possible.

  I checked that DHCP is enabled, we tried dynamic and static IP addresses, we have disabled and re ipv6 enabled, we used the command prompt to reset winsock and stack ip, I looked into msconfig services for service # Id_String1.6844f930_1628_4223_b5cc_5bb94b879762 # Apple off but it isn't here.

  I have a real dislike for Norton / products McAfee and there is none of these on the laptop. We will install Comodo Internet Security, Eusing Registry Cleaner, Spybot S & D and Spyware Blaster as soon as the wireless is configured and that the Windows Firewall is disabled.

  We also have many turns of the spin off the coast and laptops, etc. and deactivation and activation of the adapter.

  It seems that all the usual solutions for the lack of connection are not the culprits this time.

  IPconfig for W7 laptop that works well is:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\Adrian>ipconfig/all

  Windows IP configuration

  Name of the host...: Adrian-laptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 4313 802.11b/g/n
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::30fd:c01f:ab28:fbf9% 13 (Preferred)
  IPv4 address: 192.168.1.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 13 August 2012 09:16:54
  End of the lease...: August 14, 2012 09:56:23
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 360244224
  DHCPv6 DUID customer...: 00-01-00-01-13-B2-5C-FD-90-FB-A6-A5-8F-73

  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {09285A7E-7837-4D7B-994D-C70130D43958}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 15:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:73 b 8: 8ed:720:a3fa:1e53 (Prefer
  Red)
  Address IPv6 local link...: fe80::8ed:720:a3fa:1e53% 24 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Reusable Microsoft 6To4 tunnel map:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  IPconfig for the Vista laptop that works wired but not when it's wireless is:

  Microsoft Windows [Version 6.0.6000]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Adin>ipconfig/all

  Windows IP configuration

  Name of the host...: Georges-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-1D-D9-1B-71-69
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::78c1:cedd:291c:e44b % 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: August 13, 2012 11:28:16
  End of the lease...: August 14, 2012 11:28:16
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 151002585
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1B-38-5C-28-24
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: isatap. {E409704E-A039 - 41A 8 - BEB9 - 614B6A018}
  493}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.1.2%12(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :
  ... Description: isatap. {CC1DD067-8D6C-4BDE-BCC8 - 13921 941
  532}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help or advice will be most appreciated thanks

  Norton or McAfee pre-mstalled of recovery of the manufacturer media?

  If so, did you uninstall it AND run the tool to remove the appropriate product manufacturer?

  Download the Norton removal by https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home

  Close all other programs, and then run the tool. When it is complete, reboot the machine if she wants it or not.

  Download the removal of McAfee Development tool from:

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Click on save and save the file to a folder on your computer.

  Navigate to the folder where you saved the file.

  Right-click MCPR.exe and select "Run as Administrator" to run the removal tool.

  When you're finished, restart.

• fqdn ping fails after recovery from sleep mode

  client system is win7 64 bit

  Server DSN is isc bind 9.7 works on win 7 64 bit

  local system of fqdn ping fails after recovery from sleep mode.

  I do not think that the ping never hits the network.

  Nslookup of full domain name or name of the system only exists.

  the system name ping only succeeds.

  then after ipconfig/release, ipconfig / renew, successor to ping the domain name full local system.

  someone at - it thoughts or ideas?

  Hello

  From the description of the problem, it seems that your computer is on a domain. I suggest you post the same question on the link below. The link given below is link TechNet Support for Windows 7. The question facing you is best for TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other issues related to Windows.

• Each second ping fails

  Hi all

  I have a little test lan with the installation of 2611xm for ipsec vpn.

  On each fe port I have a laptop plugged directly inside, int is assigned by dhcp, and outside at this stage is static.

  I use 3rd party ipsec client program shrewsoft customer vpn.

  The tunnel rises and its is established with many packages of encryption and decryption.

  As mentioned in the title, each second ping fails in both directions from client to client, router 100% inside the cell phone pings and fails to address assigned 192.168.1.10 to the client ipsec "remote".

  Here is my config and below that, I think that highlights where might be the cause, the arp entry address assigned ipsec is incomplete.

  An ipconfig/all on the "remote" client shows a mac address of the int as aaaa.aaaa.aa00 tunnel.

  Kind regards

  Mitchell

  config:

  Router #show run
  Building configuration...

  Current configuration: 2139 bytes
  !
  version 12.3
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot system flash: c2600-ik9s - mz.123 - 6f.bin
  boot-end-marker
  !
  !
  no location network-clock-participate 1
  No network-clock-participate wic 0
  No aaa new-model
  IP subnet zero
  IP cef
  !
  !
  no ip domain search
  IP domain name vpn.changeme.com
  IP-server names 4.2.2.2
  DHCP excluded-address IP 192.168.0.0 192.168.0.9
  !
  internal IP dhcp pool
  network 192.168.0.0 255.255.255.0
  default router 192.168.0.1
  4.2.2.2 DNS server
  domain vpn.changeme.com
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  Keyring cryptographic remote_user
  pre-shared key address 0.0.0.0 0.0.0.0 key xxxx
  !
  crypto ISAKMP policy 1
  BA aes 256
  preshared authentication
  Group 5
  ISAKMP crypto nat keepalive 5
  crypto ISAKMP client configuration address pool local ipsec
  !
  ISAKMP crypto client configuration group remote_user_group
  key xxxx
  outdoor pool
  ISAKMP crypto profile remote_user
  Keychain remote_user
  remote_user_group group identity match
  !
  !
  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac DYN_TFS
  !
  crypto dynamic-map DYN_MAP 1
  game of transformation-DYN_TFS
  REMOTE_USER Set isakmp-profile
  !
  !
  launch of the card client configuration address card crypto
  card crypto card client configuration address respond
  map 1-isakmp ipsec dynamic crypto map DYN_MAP discover
  !
  !
  !
  !
  interface FastEthernet0/0
  ETHERNET INTERNAL description
  the IP 192.168.0.1 255.255.255.0
  automatic duplex
  automatic speed
  !
  interface Serial0/0
  no ip address
  Shutdown
  no fair queue
  !
  interface FastEthernet0/1
  WAN ETHERNET description
  10.1.1.1 IP address 255.255.255.0
  automatic duplex
  automatic speed
  No cdp enable
  card crypto map
  !
  interface Serial0/1
  no ip address
  Shutdown
  !
  IPSec local pool 192.168.1.10 IP 192.168.1.100
  IP http server
  no ip http secure server
  IP classless
  Driving IP profile
  IP route 192.168.1.0 255.255.255.0 FastEthernet0/1
  !
  !
  access list 101 ip enable any 192.168.0.0 0.0.0.255
  !
  !
  !
  !
  !
  !
  !
  !
  Line con 0
  Synchronous recording
  line to 0
  line vty 0 4
  privilege level 15
  opening of session
  transport telnet entry
  !
  !
  !
  end

  ARP on the router #show
  Protocol of age (min) address Addr Type Interface equipment
  Internet 10.1.1.2 0 001b.d338.0bab ARPA FastEthernet0/1
  Internet 10.1.1.1 - 0017.5993.a6c1 ARPA FastEthernet0/1
  Internet 192.168.1.10 0 incomplete ARPA
  Internet 192.168.0.1 - 0017.5993.a6c0 ARPA FastEthernet0/0
  Internet 192.168.0.2 1 001b.d338.0b7c ARPA FastEthernet0/0

  The "Internet 192.168.1.10 ARPA incomplete 0 " output does not seem right. "."

  The router should not have even this particular ARP entry because there is no router with the 192.168.1.0/24 subnet interface, so there is no reason for the router to ARP for this subnet unless you connect a PC with the 192.168.1.10 ip address previously. I suggest that you turn off the router ARP entry "clear arp.

  For the following path statement: ip route 192.168.1.0 255.255.255.0 FastEthernet0/1, I would like to change the next hop of the fa0/1 to the actual ip address of the next hop router (or your ip address of PC if you connect directly a PC to the router interface fa0/1), that is to say:

  IP route 192.168.1.0 255.255.255.0 10.1.1.x

  Hope that helps.

• Hello... I have a subscription plan on CC and notified just updates are available, so I've updated bridge CC of PS, CC2014 PS and Lightroom 5. All updates have been successful but now CC PS displays a button that says trial start. All applications say ' d

  Hello... I have a subscription plan on CC and notified just updates are available, so I've updated bridge CC of PS, CC2014 PS and Lightroom 5. All updates have been successful but now CC PS displays a button that says trial start. All applications say ' day '. I'm on a Macbook Pro running the Mavericks. All advice appreciated. Thank you

  You can go to help > disconnect... restart PS and if you see "buy this product", click that and connect.

  You can also disconnect from Creative Cloud Desktop app (gear icon > account preferences > Déconnexion restart your computer and log in.)

  Ask in the forum of creative cloud Adobe Creative Cloud

  So those who fail. You must contact the Support by chat or phone

  Contact the customer service

  Gene

• My Photoshop installation was successful, but the patch does not how to solve?

  My Photoshop installation was successful, but the patch failed, how to solve?

  Gprez2006 you have to fix your download error before the patch/update will be able to be successfully applied.  See error when downloading applications Cloud Creative - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for more information on how to fix download errors.