Successfully installed XP Mode, but is not "Windows XP Mode" in the folder "Windows Virtual PC"...

Similar Questions

• Update KB937287 keep apearing as the only updated, try install many times, but does not work, tried it with the standalone version and it keeps apearing

  Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.

  Hi mayortom,

  Thank you for visiting the Microsoft answers Forum.

  You can follow the steps outlined in the article below:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

  I hope that helps!

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Once received and set of Opera Mail messages, import Thunderbird works fine, but no not record messages sent to the folder "sent", even if messages are sent

  I managed to import messages from Opera Mail. Initially, the sent mailbox did not show in Thunderbird. A fast-moving and new installation solved that, but Thunderbird does not save sent messages to the sent box, where imported Opera Mail messages are stored. Even if the messages are not saved, they are sent correctly. The attached picture shows the error message.

  Probably a name - confused if you store sent mailserver on he must have the right name. (subscribe)
  You can configure under choice of account / sending of copies and records (cards) pointing to the right local folder.

• Installed creative cloud but does not start. I tried the removal tool and reinstalling, but always the same problem occurs. I can't see the files Creative could too.

  Help, please. Thank you

  Please check - error "Unable to install" received when installing Adobe Creative Cloud desktop application

• computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  Hello

  You should not have a password to reinstall Vista.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»

  first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»   Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?

  Jürgen Freund

  First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?

  I found this YouTube video about the error 126 precisely to solve the problem.

  How to fix the ERROR 126 when you open programs OpenGL - YouTube

  The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)

  LoadLibrary failed with error 126: could not find the necessary

  Please let us know if it worked for you.

  Thank you.

  RTA

  Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.

• I'm trying to install internet security but do not remember my user password so I can't continue please help

  I'm trying to install internet security but do not remember my user password so I can't continue please help

  Hello Diane Challender,.

  Thank you for your message.  Unfortunately, the technical support engineers Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.  For more information about this policy, please see the sticky below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• At the old version of adobe reader and upgrade inadvertently WAA CD player. realized that I could change is no longer with this and tried to uninstall and reinstall and older versiono, but could not. Tried to reinstall the domain controller new version an

  At the old version of adobe reader and upgrade inadvertently WAA CD player. realized that I could change is no longer with this and tried to uninstall and reinstall and older versiono, but could not. Tried to reinstall the domain controller new version and it would not, indicating that the newer Version is already installed. Nothing in programs and features.

  Looks like a job for the cleaning tool: Download Adobe Reader and Acrobat tool - Adobe Labs.

  If you prefer XI player, make sure that "Install updates automatically" is not enabled under Edit > Preferences > Updater. It is possible to download and apply patches manually.

• Photoshop does not open all the files on my Imac it will open work and recent files very well but will not save. I have the latest version. What is "cleanmymac3" that prevents the loading of files?

  Photoshop does not open all the files on my Imac it will open work and recent files very well but will not save. I have the latest version. What is "cleanmymac3" that prevents the loading of files?

  I must add that when I try and open a file, it freezes and I have to force photoshop completely.

  Try resetting your Photoshop preferences.

• I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  check your directory program files adobe > first pro cs6 > first pro.exe file.

  (restart the cc app will probably also work.)

• Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

  Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

  In proxy environment, the computer cannot connect to the Adobe servers, so it does not work. The proxy or the firewall should be disabled if you use creative cloud.

  Hope this will help you.

  Kind regards

  Hervé Khare

• PS 14.2.1 running x 64 just updated through creative cloud.  I select a layer but do not see "Extract assets" in the file menu.

  PS 14.2.1 running x 64 just updated through creative cloud.  I select a layer but do not see "Extract assets" in the file menu.

  It's a little confusing, but creative cloud, you will also see fine 'Photoshop CC' and ' Photoshop CC (2014).

  The first is 14.* PS and the second is PS * 15-active extract in Photoshop CC (2014).

• Just recently I have not been able to move the folder on my desktop. I have to copy and paste it into a new folder, and then delete the old on.

  Just recently I have not been able to move the folder on my desktop. I save videos to my office then then move in different folders, but now need to copy and paste, then remove the video from office.  Around the same time, when I try to use help I have Windows Help cannot start.  So please HELP.  Using Win7.

  Hello

  1. Did you of recent changes made to your computer that caused the problem?
  2. It happens that the Office? Have you tried with Documents and other readers?

  Step 1: File system [SFC] Checker

  Try to run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run a virus scan to check if there are infections on the computer:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Step 3: Follow the instructions in the article to fix the problem of files and folders in Windows:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  For more information, follow the instructions in the article to improve the performance of Windows 7:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  It will be useful.