Similar Questions

• A blue screen: STOP unknown or codes - error "outlook express out of memory" can be connected

  Original title: outlook express memray on xp

  I get the blue screen of death in recent months; It restart once or twice he (calculation) brings back ok. If I warm it starts, it restarts correctly.

  I get a message from Outlook express is out of memory and cannot stop - in my opinion, this is perhaps my BSOD problem.

  I can open outlook and read/send mail. If I 'x' outlook express, it seems closed and he does not appear as a running service.

  The operating system is XP with service pack 3

  Thanks for the reply 'two' - I chose to reformat the computer, but the last message BSOD was on a very short blue screen page. I always welcomed to be fowared to Microsoft error messages.

  0X0000000A (0 X 00000004, 0X00000002, 0X00000000, 0808185F5)

  I ran chdsk /r and it found a few "surface errors.

  The machine is very dusty inside and I will be (carefully and everything in being grounded) clean the machine before the reformat.

  It will be a couple of translated days I can get back to it, but I followed of will be up/check for other answers.

• Blue screen Stop error code 0x000000DA in XP PRO X 64. The driver's mismanagement of system PTEs.

  Seat of Windows XP PRO X 64. After you uninstall old graphics drivers, PC does not long enough to install new graphics drivers and continually, it passes loop BSoD after windows login. I disabled the effect loop so I can display the blue screen message. I read that its actually the file videoprt.sys in service pack 2. don't forget that this is the version 64-bit (located in windows/system32/drivers) who has a bug (ver 5.2.3790.3959). I did some research to get the version 5.2.3790.1830, but I can't download it to replace the current one. Does anyone have a solution for me? Currently, my PC has no graphics driver installed because of this problem.

  The minidump file showed a SYSTEM_PTE_MISUSE (da) stop error referring to the vgapnp.sys (VGA/Super VGA video driver):

  BUCKET_ID: X64_0xDA_vgapnp! VgaStartIO + 226

  The process that crashed was the SteelSeriesEngine.exe:

  Nom_processus: SteelSeriesEngi

  If the SteelSeriesEngine.exe is the process that is constantly crashing and then disable this process to start as there may be a conflict between the SteelSeriesEngine.exe and the vgapnp.sys.

  You could try renaming the SteelSeriesEngine.exe in the directory of the program SteelSeriesEngine to something like SteelSeriesEngine.old

• Specific blue screen stop error Code

  Hello.

  I have a Dell Inspiron 6000, running Windows XP Home edition 2000 (SP3).  I had Norton Internet Security for years, so the registry is checked every day, with some minor repairs may be needed. Didn't need to defragment (less than 1% fragmented). But!  I ran CHECKDISK just to see how things were looking and he went to 4 of the 5 steps without apparent problem.  The 5th stage (which I don't remember the name) got at least 75% full. I went to a meeting, I had to attend, and when I came back, it was the BSOD with the little bit of "IRQ_Less_Equal", AND the following: (0x0000000c, 0x000000ff, 0x00000000, 0x80532a04)

  I guess that these codes specifically the point on the problem.

  I can't start. When even I want F8 or F10, I gives me the ability to restart in a variety of ways, and I always choose Safe MODE, since the BEST START PREVIOUS [sic] does not work.  I choose SAFE and confirms that Windows XP Home Edition is what I have, then get a page BACK to the drivers.  You've seen these mentioned elsewhere on this site.  Things like "multi (0)" and then even if the computer is flashing like it did something, the page just sits there.  I can't use it at all.  I'm panicking because of the content on your computer being critical of my inexcusable failure to save all.  I'm not super computer, but given the specific measures, would be certainly prepared to do everything I can to get the data back, if it does not get the ' puter running (which until that I ran CHKDSK, it WAS!)  Please, if you can help, I would appreciate massively and save what I ever would have faithfully!  Thank you and hoping that...

  When you choose Safe Mode, which is the last thing on your screen?

  If is mup.sys and XP think that there is a chkdsk waiting, XP running chkdsk backstage and mup.sys is the last thing you see before the end of the chkdsk command.

  For example (if someone wants to try)... If you schedule a chkdsk to run at the next reboot, reboot safe mode, your screen appears to be 'stuck' on mup.sys while in reality, the regular chkdsk is now running.   You can say the system is not really "hooked" because the hard drive light flashes.  Finally, the chkdsk will end, and startup continues.

  Sometimes people will be complaining about their system is stuck on mup.sys when (if ask you the right questions), you will find all of a sudden, they remember that they have a chkdsk in waiting, and that is why their system appears to be hung on mup.sys.

  It is not to be confused with the other times when there is no chkdsk waiting and the system seems to cling mup.sys (which isn't the real problem in this situation anyway).  In these situations where there is no chkdsk waiting and the last thing you see on the screen is mup.sys, the system is not really stuck on mup.sys - it is hanging on what comes after mup.sys (and you can understand what it is and fix it).

  Depending on the size of your hard drive, what options you have chosen with chkdsk and what chkdsk finds to do, the chkdsk command can take a long time – hours, days or weeks (so says Microsoft).  Disk 1 to I, I think that chkdsk takes more than 2 hours to run even when there is nothing for her to 'do' (I don't know exactly how long, but I know I can't stand it).

  So if you are "hooked" in Mode safe on mup.sys and your hard drive flashes, you should try to wait outside because XP is just doing what you said to do, which was run chkdsk.  I can't say what will happen if you get impatient and push the power or reset button while chkdsk is running...

  If you want to recover your data off of an external hard drive, you can do too - do not move the hard drive to another machine and many people do not have the luxury of another machine.  You can start your system on a bootable CD, you can do (no XP media required) and simply copy your stuff to an external USB drive or a big USB key.

  I would use Hiren because there a lot of troubleshooting and recovery tools built in and has the appearance of XP and are a little more respectful of the average people like me compared to the CD of Linux/Ubuntu (see instructions too many and too much work if you're not used to it).

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)

  Hello

  This is my first post, please have mercy,
  I have a BSD at startup and this is the code that continues to show upward.  System Restore (from system repair and also safe mode) has not solved the teething problems.
  Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)
  I think the code means some sort of failure hardware, is anyway to deduce which device has failed in assessing these codes?
  Please let me know if I'm on the wrong track with a hardware failure, I appreciate all the advice.
  Thank you

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.

  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.

  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  (1) ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) make sure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update of the BIOS of the motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  (6) attempt (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  (7) as the last troubleshooting no invasive steps, perform a reinstallation of Windows 'vanilla': just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) if all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• HP Pavilion dv7-2160ed - blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  And I also noticed that some hardware is not installed to properliy:

  1 base system device:
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  Device base system 2:
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3 base system device:
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  unknown device 1
  ACPI\ENE0100
  * ENE0100

  unknown device 2
  ACPI\HPQ0004
  * HPQ0004

  Can someone help me with this problem?

  Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• A blue screen (Stop error) has been reported. The message contains the error details.

  Hello Hello.
  can someone help me why this error is coming.
  I use a laptop lenovo.
  Error details:
  product-windows stytem, operating
  ID-1003,
  source-system error,
  version - 5.2.
  sysmbolicname-ER_KRNLCRASH_LOG,
  error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1

  A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

  Concerning

  Chandra Murali

  .net developer,

  HYD.

  Hi Murali,

  ·         What is the random question?

  Try the following.

  Method 1: Check for memory questions

  Microsoft Online Crash Analysis - windiag

  Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.

• blue screen * STOP 0x0000000A in Windows XP

  blue screen error message: * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) win xp home edition

  Around my house (less than 100 feet I can't use / the view high tower or net - only 'safe mode' whenever I start it (under each variable with or without battery) I get the error message blue screen (see above) - outside of the area of 100 feet, lap top works fine... perfect, starts every time;) HP lap top xp home ed works very well... (I can't use it at home or within 100 feet of my house via especially blue screen message)

  blue screen * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) xp home ed

  You get the following BSOD:

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  Please download the files dmp from the Windows\Minidump on your Skydrive folder (copy the dmp first on your desktop, otherwise you can not download them) and post a link here, so that we can look at landfills. Perhaps we see the cause.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Blue screen (STOP) errors that cause Windows Vista to shut down (blue screen of death)

  I get this on a blue screen stop code and I can't find what this code means someone can help me please v

  00000101 0 x (0 x 0000000000000061, 0 x 0000000000000000, 0xffff98000c6e180, 0 x 0000000000000001

  Best advice I've seen on this error (here: http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 )
  What you are looking for will be in one of the following categories:

  (a) the BIOS bug
  (b) a pilot whose activity is at the origin of the processor target lock
  (c) a defect in hardware (temperature, voltage, dust, RFI, pure and simple borkedness...)? I also wonder about default CPU)
  Therefore, check the drivers
  Then check the inside of the species (temperature, voltage, dust, etc.).
  Then run tests of stress of material

  Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
  Try this free stress test: OSS - GIMPS

  CPU Stress Tests:
  Just do 1 or 2 tests in most circumstances. I have not used one of these tests myself, so I listed everything I could find.
  - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19182&lang=eng
  - http://7byte.com/index.php?page=hotcpu
  - http://www.7byte.com/index.php?page=burnin64
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://www.fossiltoys.com/cpuload.html
  - http://www.pcworld.com/downloads/file/fid, 7146-order, 1 page, 1-c, alldownloads/description.html
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://majorgeeks.com/CPU_Stability_Test_d215.html
  - http://www.xtremesystems.org/forums/showthread.php?t=201670
  -l' or the tests suggested at this link are bootable: http://www.techsupportforum.com/forums/f15/headless-cpu-stress-testing-393435.html#post2232929

  Then try to replace parts.
  Then look for the version of your BIOS to see what changes have been made.

  Text courtesy of http://www.carrona.org/ Usasma

• Windows 7 - Crash blue screen - STOP: 0X000000F4

  Hi all

  Windows 7 - Crash blue screen - STOP: 0X000000F4

  Screen shows e blue screen will display the following error code:

  STOP: 0X000000F4 (0XFFFFFA800C4C4B10, 0XFFFFFA800C4C4DF0, 0 X 0000000000000003, 0XFFFFF8000418FE20).
  I tried to restore the mode, the safe & all the option available to start properly.  Given that I have no DVD of windows 7 to re - install windows again.
  My question is as follows:
  -Is - error code says something.
  -A way to re - install windows without CD or DVD or save the image.
  -Also, I can read and access data from the C: & D: drive in cmd in restore mode guest mode.
  Waiting for your suggestions.
  concerning
  Jagdish kone

  Blue_Screen_image_.PDF

  Hi Philippe,.

  Thanks for your reply. I want to reinstall windows on the same SSD. Given that the SSD drive works great as external drive.

  So please could you confirm, how do I reinstall windows again. As I see there are recovery drive comes when I use the SSD as external drive.

  Waiting for your suggestions.

  Concerning

  Jagdish

• What would cause a SQL server to blue screen with FFFFF81001BA5198 code

  What would cause a SQL server to blue screen with FFFFF81001BA5198 code

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows xp blue screen stop: 00000024

  Title: original windows xp blue screen

  had a blue screen with stop:

  Hi steveshepherd,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you insert the Windows XP CD?

  You can follow the steps provided by Karena R in the link below, which relate to this issue

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/blue-screen-stop-error-0x00000024-while-booting/196033b0-fbe9-45dd-abbf-889291d0d133

  Kind regards

  Ajay K