Suddenly, InDesign stopped work and remove all the fonts...

Similar Questions

• Windows Control Panel has stopped working and cannot read the CD

  Original title: windows control panel has stopped working

  When I went to install my Rosetta Stone program it showed Windows has stopped working and then installed the program and when I put the cd in my computer saids windows control panel has stopped working and cannot read the cd

  Hello

  You say "Control Panel has stopped working" or "Windows Explorer has stopped working"?

  Follow the steps mentioned in the article below and check if that helps:

  Start the computer in a clean boot state

  Start your computer in a clean boot state, and check if your computer is able to read the CD. Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cloud of continually closes, and closes all the fonts I have loaded? I have to log in several times a day?

  Cloud of continually closes, and closes all the fonts I have loaded? I have to log in several times a day, someone knows why?

  Please follow:

  https://forums.Adobe.com/thread/1830010

• I get a message 'Adobe Illustrator has stopped working. Please activate the fonts Verdana and r

  I get a message 'Adobe Illustrator has stopped working. Please activate the Verdana fonts and relaunch Illustrator. "I looked in my fonts and I do not have the fonts veranda. What I would do.

  You must install all four members of the family of Verdana fonts on your machine. Please check the following thread that corresponds to your question:

  http://forums.Adobe.com/message/5905430#5905430

  Kind regards

  Rambour

• yesterday I was with my dvd burner and then all of a sudden it stopped working and when I went to my computer, its icon was not there! Please can u help me?

  my dvd burner is LG and its super multi and lightscribe

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Firefox suddenly stop working and I get the following error message: could not initialize the safety component of the application. Most

  Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
  restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
  behavior when you access security features.

  See:

  • https://support.Mozilla.com/kb/could+not+initialize+the+browser+security+component

• Captivate 5: errors on unloading (IE 7/8 only) JavaScript. How find and remove all the JS call?

  One of my clients is using Captivate 5 to produce interactive SWF files is transferred to an LMS. Sovereign wealth funds include quiz questions, but these are not followed. It is not a compatible SCORM LMS, and will not accept any downloads except for the SWF file, which is displayed to the student within an iframe on a page of course HTML, where src = "filename.swf". When you find this page of course in an old browser like IE6 or modern as Firefox 3.6 browser, we can click on a link in another div on this page unload this page run and load the home page for this course. ("This is a simple < a href ="...) "(> balise avec aucune écriture de script supplémentaires.)"

  But when we discover the current page with the SWF in the iframe in IE7 or IE8, by clicking this link on home page shows an 'access denied' JS error: "Line: 1; Char: 1; Error: Access is denied. Code: 0; "URL: [filename.swf]".

  It seems that the SWF file attempts to call some JS which is not available on the server, because we cannot download any HTML or JS pages, but just the SWF file. I was able to get IE7 the page by putting the site in the Zone of confidence with the weakest of the security, but it does not work in IE8. In any case, we cannot ask our students to be able to change their security settings, as many of them are in organizations where they don't have the admin rights.

  Issues related to the:

  (1) where could the problem or calls be coming with the release of Captivate 5? I have:

  -off followed SCORM

  -made sure none of the quiz pages try to report the LMS

  -removed the preloader

  -removed the ToC, the borders and playback skin bar

  -turn off autoplay

  Is there anything else I can adjust in Captivate?

  I tested more far by building a simple route a form with a text box and nothing else, and all of the items listed above, turned of. When I built a simple HTML page with the same code iframe to contain this SWF and tested locally, no release of Captivate 5 or 4 gives the same error in IE7/8 when we try to unload the courses. However, Captivate 3 output SWF works perfectly in the iframe and discharge without any error.

  (2) have one of you has successfully placed a SWF from Captivate 5 file in an iframe and were able to discharge with success in IE7/IE8 by clicking on a link to load another page? If so, what are the settings did you use?

  Finally, I don't think that domain issues are the reason for these problems. I got error unloading when I test IE7/8 locally on the disk hard or my web server where the SWF, page HTML and HTML Homepage are all in the same domain and directory.

  Thanks for the ideas, you can provide!

  When you refresh or close IE8, the debugger reports the error "Access denied" and that it points to the JS code fragments:

  __flash__removeCallback (document.getElementById(""), "rightClick");
  __flash__removeCallback (document.getElementById(""), "mycpSetValue2");
  __flash__removeCallback (document.getElementById(""), "cpGetValue");
  __flash__removeCallback (document.getElementById(""), "mycpSetValue");
  __flash__removeCallback (document.getElementById(""), "cpEISetValue");
  __flash__removeCallback (document.getElementById(""), "cpEIGetValue");
  __flash__removeCallback (document.getElementById(""), "cpEIXMLGetValue");

  If you look at the location CaptivateMaintimeline.as:

  C:\Program Files\Adobe\Adobe Captivate 5\AS3

  You will notice that these are the same external Interface cooked in Captivate recalls.  Commenting on these lines of code simply did not help.

  General browser security rule:  You cannot call the JS functions on an iframe that has been loaded from another domain. (Programmatically, there are ways around this)

  Theory:

  My best guess is that sovereign wealth funds code AS3 calls these nonexistent JS using ExternalInterface.call("saveglobalscore",score) AS3 functions.  Note that the getElementById("") is empty - red flag # 1.  In addition, when you load a SWF directly into an iframe in IE7/8 with no html container, your "document" object does not exist - red flag #2. It also means that the "document.domain" property does not exist or the other.  That's why (best guestimate), IE cannot determine the domain the .swf file has been loaded and safety measures are applied automatically.  IE assumes that the iframe to another domain and denies access.  FF does not work.  When you add the field to EI of the "Zone of confidence" does not apply security to the swf file works.  Again, this is a guess, but the theory fits.

  Possible solutions:

  The code AS3 swf file call nonexistent functions JavaScript.  It's cooked in Captivate itself.  I don't think he has that you can do about it.  IE7/8 guess the iframe is from another domain, because it cannot solve the document.domain of the iframe.

  1. you can set a "Zone of confidence" IE, but as you said, this is not practical.

  2. convince your LMS provider to load the .htm file in the iframe instead of the .swf.  This will create the "document" JS object and the field should be resoved correctly.

  3. use another tool of e-learning to create sovereign wealth funds to avoid AS3 ExternalInterface.calls of Captivate (No.! I LOVE CP)

  4. use JavaScript to remove their iframe and replace it with your own by using the file .htm as the CBC for the iframe.  That's assuming you have control over the file .htm container.  Do you have a way to add scripts in the container .htm or is - it only controlled by the provider of your LMS?

  Jim Leichliter

• Satego P100: rows and removes all the 2-3 sec during the game

  My system is Satego p100 Vista, core 2 duo 1, 66 GHz, 2048 MB RAM, and geforce 7900GS 512 MB
  I tested a large number of games:
  Company of heroes, Tomb raider Legends, supreme commander, trackmania nations, Battlefield 2, Far Cry, Gothic 3, oblivion, wars C & C Triberium

  Every time the same LAGS in 2-3 seconds the pace will for example of 50 fps to 20 fps, even once at 50 fps every 2-3 sec and so on, it is impossible to play well even if I put the game graphically at the lowest end of 20 to 45 minutes the same delay.

  With the cpu - Z tool, I see that the CPU turns on Office on 1000 MHz, and when he needs
  power, he goes to 1666 MHz but if only a second cpu do nothing, he defined to 1000 MHz.

  On the one hand it is overheating protection and saving energy, but on the other hand, it makes no sense to game of doesn t. In the game, I run a little bit, the cpu gives full data speed, slowing down at full speed lag... Slows down the LAG full speed... and so on, he's crazy!

  I can't find any control panel to adjust it. And to set energy vista setting effective performance do nothing. I read that the core 2 duo are normally stay cool extreme, but sometimes there is deep into the CPU before a second witch high heat-maximum rates are caught from the cooling. I put t now if that's the problem but I often recognized that the cpu fan for no reason, just give a second, fullspeed that slow down!

  I can understand that Toshiba engineers are trying to give a freshness and energy efficient long life for the material, but I could by a professional laptop fore 799,-euros and not this. A system with these hardware settings must be able to give full power without overheating any time.

  I hope it's just a driver issue, but I n t think so.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20191

  It s on Satego performance.
  The Vista operating system seems to be a reason for the accidentally drop-outs.

  Install XP, if you want to play games!
  Someone has placed the results of 3DMark06:
  Score in 3DMark06 with Vista 3000-3200 with XP on 3800! XP is an key babe ;)

• I thought that there was once a way to scroll through the bookmarks and remove all those who died, but I'm not; ?

  Just that I remember years ago that I had an option that strives to open each bookmark and remove all the dead.
  I want to go back.

  The add-on CheckPlaces could help.

• When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go of the mouse button and try to select more it goes to Negative (-) and removes all selections I made and won't allow me not one

  When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go the mouse button and try to select it goes to Negative (-) and removes all the selections I made and not will not let me add again. I never had this problem before, you usually need to hold down the Alt (or Option MAC) to subtract from selections. No one knows what happened or how to fix this problem, maybe a setting I accidentally hit? Thanks for your suggestions! :))

  Look at the options of quick selection - particularly the four icons on the left.

• Remove all the Options from Shuttle point

  Apex 3.2

  I have a shuttle element called P19_SHUTTLE.

  I want to hide all select it and remove all the options.

  I tried

  Header HTML

  < script >

  function shuttle_settings()

  {

  $x_Remove ('P19_SHUTTLE_MOVE_ALL');

  $x_Remove ('P19_SHUTTLE_REMOVE_ALL');

  }

  < /script >

  HTML Body attributes

  OnLoad = "shuttle_settings ()" "

  This does nothing.

  What should I do?

  Gus

  Hello

  Well, you're 100% sure that these icons have id?

  I'm sort of reminder that APEX 3.2, there is no identity for these icons.

  Kind regards

  Jari

• Possible to remove all the traits?

  Hello community,

  I received a file of an architect, which basically means that they just exported their program of illustrator.

  Now, there are tons of shots unnecessary in this file, is there a way to keep only the filled boxes and remove all the traits?

  I can make them transparent, but the information for the traits will always be there (cmd + y). It is essential that they would disappear because the file will be sent to a plotter cutting and overall (even if it is set to transparent) lines will be cut off, which is what I don't want.

  I would be really happy if someone could help me with that. Otherwise I guess I'll just shift-click the last

  PS. I use Illustrator CS 5.5

  Kind regards

  PK

  In most Select > even take a look at the magic wand tool and its Panel.

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• My computer keeps showing random parts "suddenly stop working" and the computer needs to reboot - I think it's a virus.

  I have a problem when occasionally and randomly my computer components apparently all of a sudden "stop working and must close ' which translates into my computer restart itself. This happens a lot, but I can not associate with any particular issue, as it changes each time. I think it's a virus, but nothing seems to be wrong, it's just the inconvenience. I had the computer more than a year and nothing wrong with it. The only other common thing is a program called "twonkymedia" seems to be on my pc and "must be closed", but I can't find anywhere to remove it.

  It's driving me crazy now, as can happen at any time during the game, work or other passtimes of the computer.

  Hello

  1 make thorough scrutiny for malware and don't forget no one program intercepts all methods of overkill use so much.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-ID/default.htm

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Vista - all programs 'stopped working' and nothing does not open. McAfee is also not working and the help and support center/internet does not open even

  On my windows vista computer, whenever I turn on my computer and log on, none of my programs work. An error message appears saying that the program has stopped working and windows will try to find a solution to the problem.  The problem is that the help and support center opens either. None of my internet programs to be open, and the same error message for all. We have tried to turn off DEP, and that did not help. My computer is connected to the internet (2wire) but is not able to run due to the problems with my computer. I scanned my computer with windows defender, and we found no problem. Help, please

  Download the McAfee tool to remove it. Use it in safe mode.

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Reboot and install MSE.