Suddenly recovered BIOS then will not turn on afterthat...

Similar Questions

• Satellite A200 - 1 GB block during the bios update - will not turn on

  Need help please, I was updating of the bios. And the process is stopped at: 2/18. I wait an hour and i decided to turn off the laptop. Know I can't turn on. Nothing happens. Anyone know how the recovery mode?

  Thank you

  (Sorry for my bad English)

  Josefa Hello,

  It sounds as if you of the BIOS chip was damaged during the attempt to update failed, and unfortunately this will prevent you from starting your laptop so that you can tyr to redo the update.

  In my view, that it will be necessary to bring or send the laptop to a Toshiba authorized service agent who has the equipment necssary to re flash your BIOS chip.

  Kind regards

• MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Your problem has nothing to do with the Windows Update feature. Contact MSN Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Have VFC Z216Gx/b, which suddenly will not turn on.

  Have VFC Z216Gx/b, which suddenly will not turn on. AC is on but nothing happens when you press the button 'on '.

  Hello Bob,

  Welcome to the community of Sony.

  Try to perform all the steps here: https://us.en.kb.sony.com/app/answers/detail/a_id/35540/c/65%2C66/kw/35540

  If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/perl/service.pl

  Kind regards

  Miguel

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Tecra M9 - sometimes that it will not turn on

  Hello.

  I have a Toshiba Tecra M9 who has a problem. Sometimes it will not turn on. You must remove the battery and press the power button. When it loads will work fine until I have move or take it upward and then hangs and crashes. Then, you must take the battery out so he can turn it back on if it will be in all.

  I tried to reload xp, tried without battery, tried a known good ram in both slots, a different hd and took part to see if I can see something loose, I have now run out of ideas.

  any help would be good

  Thank you

  Hello

  Which is really strange, buddy... In my opinion, that sounds like a hardware problem, what do you think?
  You should contact a technician for laptop (authorized service provider). Guys can verify and Exchange defective equipment parts. Maybe a mailfunction of the motherboard or the CPU

  By the way: you have updated your BIOS? If this is not the case, to do this, first!

• installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

  NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP Pavilion dv6-6b57sa suddenly stopped working and will not now to power on. Help, please!

  OK, so I'm a new student and my laptop has just decided to stop working. I had the laptop for 2 years but I have not used until I came to College. Long story short, I wanted to use it as a working laptop and one im using now for media.

  Anyway, I started the dv6 and it was fine so I jumped to get a coffee. As I got home I heard a click and then the screen was cut off and now it will not turn back. I tried the hard reset, take out the battery for 15 minutes. The battery charge indicator does not come on either. I use an original HP charger and have connected it to a plug adapter multiple with an influx of cutting on it.

  No LED, no noise, no charge indicator. Can someone help me with this, extremely upset I've saved this laptop for her than to die in the first week.

  Not sure, but there's less chance of it. Given that the laptop is not put under tension with other adapters. You must take it to store to get the verified motherboard.

• I have 6 phone is dead.  Will not turn back on

  I have 6 phone is dead.  Will not turn back on

  See Troubleshooting in the paper support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• my laptop will not turn on after a recent windows update

  Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

  Hello

  1. the updates are was?
  2. what exactly happens when you try to start the computer? You get the error message?
  3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

  Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

  Step 2: Check if you are able to boot into safe mode and send back the same.

• My laptop will not turn off...

  My laptop will not turn off, even if I push the power button for 10 seconds.  The only way is to get out my battery and unplug the unit.  It started immediately after an update about two weeks ago?

  Hello

  ·         This happens even when the power chord is connected?

  ·         What is the brand and model of the laptop?

  Method 1:

  I suggest you to check the power settings on your laptop in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2:

  I suggest you put your computer in a clean boot state, and check if the problem still persists. Click on the link below to find out how to perform the clean boot in Windows vista.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 3:

  I suggest updating the latest video drivers on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Check out these links for help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  I f the problem persists I suggest you to contact the manufacturer of the laptop and check if it helps.

  Kind regards

• my printer will not turn off

  Office Jet 6500, wireless, printer will not turn off.

  Disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

• My Windows Media Player will not burn a CD, it is 99%, then will not be finished.

  My Windows Media Player will not burn a CD, it is 99%, then will not be finished. Used to work fine, no problems then just started does not. I tried Microsoft FixIT & or troubleshooting solved my problem. What can I do to fix this?

  Hello

  1. what error message you get when it ceases to burn a CD?

  2 What problem confined to a particular CD?

  3 did you change on your computer before the show?

  4. have you tried Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter?

  Method 1: Try a different CD and check if it helps:

   

  Method 2: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

   

  Method 3: Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.