Suddenly unable to print from ms office or internet explore

Similar Questions

• Hp6700: Unable to print from my ipad

  Recently changed internet service providers and now I am unable to print from my iPad to my wireless printer.  My iPhone works, and the computer works, but cannot print anything on my iPad.

  Hello
  
  Sorry to hear that you are experiencing printing problems.
  
  Try to restart your apple device - it's a simple solution that sometimes allows to restore the connection to the printer.
  
  Other things to check would be that there has been no recent changes to the wifi password and the password for wifi on the ipad has been updated.

• Good results printing from my office? (HP Photosmart 7520)

  I tried to print from windows, hp creative suite and adobe photoshop Photo Viewer. Tested tons of different configurations and wasted a lot of ink and paper, but no matter what I do I can't get my air photo prints as well as they do when I print (same photo files) directly from a USB key connected to the printer.

  Can someone please help me understand how to match the settings / profile, that the printer uses so that I can get the same beautiful prints when printing from my office? Preferably with Photoshop?

  Thank you very much!

  vExamen still in this, it seems to be a problem in how the computer manages the image. When you import the image into a visualization software altering the image or photo turns a little natural color (CYMK) that your monitor use (RGB) prior to sending information to the printer. What you can do is to follow the instructions of Shane (see below) here to use another driver (I recommend the Deskjet 9800) who, in the printer preferences, in the paper/quality tab, that you should have the option to change the default preferences for photo printing. This will take some trial and error, because what you see on your monitor is not going to be what is printed.

• hp5610: unable to print from the internet regardless of search engine

  I'm unable to print from the internet regardless of internet search engine. I ran the impression scanning hp doctor who shows no match port, I don't know what that means. What I've tried is; power off printer, internet modem and usb ports restarted, changed, cable and ethernet cable. This problem has been resolved before by switching engines, this has no effect now. Help

  Mikev

  Welcome to the community of HP @mikiev,

  I read your current and previous posts about how you can't print from the internet, and I wanted to answer you with my suggestions. I understand that you have tried to use different however search engines, try to return to my colleague's response @RnRMusicMan on the link below and try to use another web browser altogether. Again, if you use Google Chrome, try Firefox or Internet Explorer.

  • problems printing from the internet

  If Chrome and Firefox will not print, try printing from NotePad, which is a program that is preinstalled on your system to see if the draws work from there.

  You can also try uninstalling and reinstalling Google Chrome or Firefox, whatever one you use often, to see if that helps the printing problem.

  Let me know what is happening and we can go from there!

  Good luck

• HP envy 5640: unable to print from Word or Excel 2010

  After you have installed Windows 10, I am unable to print from my desktop applications.  If I print to a PDF file first then I can print. I uninstalled all drivers and programs related to the printer and reinstalled.  I chequed firewall, and no solution.  any ideas out there?

  You may need to do a clean install of Windows 10.

• Unable to print from the Internet using HP printer psc 1210

  Original title: hp psc 1210 printer xannot can be identified by my laptop Viao soni

  I'm unable to print from the internet. This problem has not occurred before.
  What should I do or change the setting to be able to print again.
  Thanks for your help.
  Darius
  

  Hi Nicolas,.

  This problem may occur if the printer driver is corrupted, outdated or incompatible.

  1. what web browser do you use?

  2. the problem occurs with all web browsers?

  3. deal with any problem while printing from the computer?

  4. do you receive any error messages? If Yes, what is the exact error message?

  Method 1:
  I suggest you try the procedure described in the article, if you are using Internet Explorer 9.

  You receive a script error and are unable to print from Internet Explorer 9
  http://support.Microsoft.com/kb/2652062

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  I can't print or preview before printing a Web page in Internet Explorer
  http://support.Microsoft.com/kb/973479

  You can check the link for more information:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• HP Laserjet 1022N: unable to print from IE11 to, HP laserjet1022n HP Windows 10 machine

  I am able to print without any problem at all on my new HP computer applications, but with the exception of Internet Explorer 11.

  When I try to print my internet Laserjet1022n explore closes and we must open.

  Event ID 1000 and source of Application error.

  I uninstalled and reinstalled the printer (connected with a usb cable)

  I would be grateful all the other tips!

  Again, all applications other than IE11 print very well!

  The details are below:

  Log name: Application
  Source: Application error
  Date: 12/07/2015-21:02:03
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Computer DESK-8U0DERA
  Description:
  The failing application name: iexplore.exe, version: 11.0.10240.16412, time stamp: 0x55b99d3f
  The failed module name: ntdll.dll, version: 10.0.10240.16430, time stamp: 0x55c59f92
  Exception code: 0xc0000374
  Offset: 0x00000000000ea28c
  Process ID vulnerabilities: 0xaa0
  Start time of application vulnerabilities: 0x01d13131da821932
  The failing application path: C:\Program may Explorer\iexplore.exe
  The failed module path: C:\windows\SYSTEM32\ntdll.dll
  Report ID: b43ec6b3-585c-4e70-96e3-721a4de98d63
  Faulting full name of the package:
  ID of the failed package-parent application:
  The event XML:
  
   
     
      1000
      2
      100
      0 x 80000000000000
     
      1961
      Application
      COMPUTER DESK-8U0DERA
     
   
   
      Iexplore.exe
      11.0.10240.16412
      55b99d3f
      ntdll.dll
      10.0.10240.16430
      55c59f92
      C0000374
      00000000000ea28c
      AA0
      01d13131da821932
      C:\Program may Explorer\iexplore.exe
      C:\windows\SYSTEM32\ntdll.dll
      b43ec6b3-585c-4e70-96e3-721a4de98d63
     
     
     
     
   
  

  Hi @phlump,

  Welcome to the Forums of HP Support!

  I see that you are unable to print from Internet Explorer 11 to your HP LaserJet 1022n printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you are able to print from other applications. While this question would be better suited for Microsoft, I can make some suggestions. If these solutions do not help, please contact Microsoft.

  Reset Internet Explorer settings (backup your Favorites):

  You can reset the Internet Explorer settings to return to the State they were when Internet Explorer has been installed on your PC. This can be useful to solve the problems that could be caused by some settings changed after installation. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

   

• Unable to print from the internet explore 10

  I have a XPS L502X with Windows 7.  I have upgraded to Internet Explorer 10 and now I can't print from Web sites page of the preview before printing.  My printer is a Dell AIO966.  I'd appreciate the help.

  Tom Blanco,

  In addition to what DELL-Sandeep P said, try to read these articles...

  You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7

  You may not print or display the print preview of a Web page in Internet Explorer 9 (May also work for IE10)

  Some sites Web may not behave as expected in Internet Explorer

  Rick

• Do not print web pages - go to 'Internet explorer' and it will print the page

  Do not print web pages - go to "internet explore" and it prints the page

  This has happened

  Each time Firefox opened

  is recently after upgrading firefox

  See this:
  http://KB.mozillazine.org/Problems_printing_web_pages

• When I try to open files Office or Internet Explorer I get error: "host process for Windows Services has stopped working.

  Get the message below and impossible to open files microsoft office or internet explore:

  "Host process for Windows Services has stopped working"
  "A problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available. »

  original title: host process does not

  How to fix the "host process for windows services stopped working and was closed" on Vista
  http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/ I hope I could help

• Office Jet 6700 Premium: unable to print from 6700 JO unless I wake up

  Hello

  The appellant here desperate because I cannot solve this ongoing problem.

  System set up:

  Office Office

  HP Office Jet 6700 premium

  Wire in a BT Home Hub

  Laptop HP EVO, running wireless

  Problem:

  I can no longer print the laptop wireless. I need to go to my office and print something. Then only the printer seems to be "awake", and then I can print from the laptop. As you can imagine this is not how it is supposed to be and this causes a lot of frustration.

  The printer is also set for a static IP address (it was to solve other printing problems ). I also checked the firmware, and it is up to date.

  Please tell us how to solve this problem.

  Thanking you in advance

  Wolfgang

  Hi @Klee66,

  Welcome to the Forums of HP Support!

  I understand that your HP Office Jet 6700 Premium do not wake up when you print on it, unless you wake up before hand. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  There could be many reasons why this is happening, so please bear with me.

  I see what your printer firmware is up to date, which is good.

  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please try Fix It tool of Microsofts, solve printer problems.

  You do not share the printer from the computer desktop you have in sharing files and printing? Otherwise, this could cause part of the problem.

  Do you turn the printer power on and off?

  I can't see what your printer is connected to the BT Hub with an ethernet cable.

  It is possible that the laptop is connected to the printer cannot communicate on the 5.0 GHz network. If they are of the same name that will be confusing.

  Have you tried to configure the wireless and no cable connection on the printer to see if it makes a difference?

  How old is the router, have you also checked to see if the router firmware is up-to-date?

  Is the router dual-band? Two networks are the same SSID for 2.4 GHz and 5.0 GHz? If so, change the SSID to 5.0 GHz to a different name and restart all devices.

  What router do you have to BT?

  I suggest you read this article by BT, I have problems of connection of 5 GHz and features dual band wireless BT Home Hub 4 or 5 Hub.

  I see that you have setup a static IP address. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  While in SAP, open the network tab, and then select IPv4.

  Set the manual DNS on the printer.

  • Set the primary DNS as 8.8.8.8
  • And the secondary DNS as 8.8.4.4

  I would like to try the steps in this guide, HP printers - printer (Windows 8) "offline" Status Message.

  If the problem persists, please see these links or contact BT

  BT.com BT Home Hub 5 Product Details - link

  http://BT.custhelp.com/app/answers/detail/A_ID/46549/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com link - saving on the BT Home Hub 4 and 5 of Hub

  http://BT.custhelp.com/app/answers/detail/A_ID/43669/c/346/session/L2F2LzEvdGltZS8xMzg2NzczMzgzL3NpZ...

  BT.com link - what is the function of Smart Wireless BT Home Hub 3 and Hub 4 Hub5?

  http://BT.custhelp.com/app/answers/detail/A_ID/32235/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com - contact us

  https://bt.custhelp.com/app/contact#h=eyJzdGVwMCI6ImNvbnRhY3RJdGVtTGluazU2MjciLCJzdGVwSWR4IjowfQ...

  I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet 6000 computer connected to windows 7. Unable to print from the laptop Windows XP

  Printer connected by USB to the Windows 7 desktop.  Printing is fine.  I have two computers on the same network of working group, file sharing is allowed.  My laptop detects the printer on the network, but there is apparently a driver problem.  The disc supplied with the printer will only install on XP and Vista, so downloaded the drivers for the new office of windows 7.  I either get a message "Failed to print" or "the handle is invalid."  When I tried to connect to the printer via the network of sharing and tried to open it, I was told that the wrong drivers were located on the server.  He had the air of a file with *. INF.  Do I have the wrong drivers on the desktop or do I need to install the drivers on the laptop?  I never had this problem with my old Vista desktop.

  Hello.  Finally, I was able to install additional drivers for XP on the server computer and can now print from the laptop.  Thanks for the help!

• Suddenly unable to print: Vista, Canon MP460

  We can now print from our PC's X 3200 Acer Vista for our Canon MP460 printer/scanner.  The PC is around the age of 2 months and feel initially worked well.  However, for these last days any function related to the impression siezes up as unresponsive, leading to having to use the Task Manager to close it.  This applies not only to send a doc to print (the doc is displayed as "printing" print queue, but nothing happens), but also try to display Ports in the printer - properties.  We also have problems of suppression is not the queue documents - even if we can force by restarting the PC.  The USB connection between the PC and the printer looks OK - we are able to scan the docs who then normally save on PC, and the copy is too thin.
  So far, we tried:
  (i) uninstall/reinstall print two drivers CD supplied and the Canon Web site.  Some attempts have been frozen, others said that they were unable to completely uninstall.
  (ii) if stop/restart the spooler via a command prompt CMD.  Tried this because some discussion forums referring to known issues with Vista and printers: http://www.vistax64.com/vista-print-fax-scan/75468-printer-always-offline.html

  Don't know what else to try, any suggestions welcome!
  Thank you

  I'm stuck,
  Here are a couple more things to try.  First of all, try to plug the USB cable into another USB port.  If it is connected to a USB hub, try plugging directly on the computer.

  Go to services: click Start > Control Panel > administrative tools > Services and check to see if the service "mpservice" is running.  Make sure it is set to automatic and is started.

  If you have not already, see this download:
  http://www.Microsoft.com/Windows/compatibility/details.aspx?type=hardware&p=multipass%20MP360&v=Canon&UID=&PF=3&pi=2&c=printers%20%26%20scanners&SC=multifunction&OS=32-bit

  Let us know if this is helpful.

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to print from the Internet, line error: 1791.

  Original title: Printint problem

  Until about two days ago, I was printing very well.  Now I can print office documents and a printer test page, but I can't print anything on the internet. The following statement keeps popping up.

  "An error has occurred in the script on this page".

  Online: 1791

  Char: 1

  Error: Invalid Argument

  Code: 0

  URL: res://ieframe.dll/preview.is

  I've updated everything, ran analyses of the complete run of performance system and stem from boredom

  Hello

  I would like to know more information on the issue, so that we can help you.

  1. what version of IE are you using?
  2 the question has started recently?
  3. have you made changes on the computer before this problem?

  I suggest to try the steps to resolve script errors in Internet Explorer and check to see if it works for you.

  How to resolve errors from script in Internet Explorer:
  http://support.Microsoft.com/kb/308260

  If this did not help, then try the procedure described in the following Microsoft Support article and check if that helps.

  Impossible to print or view the print preview of a Web page in Internet Explorer: http://support.microsoft.com/kb/973479

  Please respond with the State of the question, so that we could help you better.

• Ho Deskjet 2542: printing from MS Office 2013

  I have cannont impression of MS Office 2013, Word or Excel.  Can print from Internet sites.

  Hi @kathyr50 ,

  By your post, I see that you still have problems printing from office 2013. I would really like to be able to help solve this problem.

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key.
  2. In the start screen, type "devices and printers".
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder by right clicking on your Deskjet 2542 and left click on printer properties.
  5. Left click on the Advanced tab.
  6. Left click on new driver.
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of Printers on the right.
  8. Select HP as the manufacturer on the left.
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard.
  11. Under the printer properties window, select 'Apply' but do not hit OK.
  12. Select the general tab.
  13. Rename your printer HP Deskjet 2542.
      
  14. Hit OK.
  15. Finally, right click on your 2542 Deskjet one more time and left click on Printing Preferences.
  16. Left click on the paper/quality tab.
  17. Left click on the drop down menu 'Normal' for the print quality on the bottom right and change that to fast Normal.
  18. Press apply and OK.
  19. Then try to print from Notepad or Word.

  Please let me know the results.

  Have a fantastic day!
  Thank you.