sufficient privileges to create NETWORK RDF

Similar Questions

• ORA-01031: no sufficient privileges, while creating a FK

  I loged as sys and follow up on command, I am getting ORA-01031 error, how can I solve this
  

  ALTER TABLE CORE_BUSINESS.CB_PEN_ACCOUNT_INFO ADD 
   FOREIGN KEY (PEN_AWARD_REGION)
   REFERENCES GENERAL_INFORMATION.CB_REGION_FO (REGION_FO_CODE)
   ENABLE
   VALIDATE

  You need the GENERAL_INFORMATION user to grant the privilege of REFERENCES on table CB_REGION_FO to user CORE_BUSINESS:

   grant references on CB_REGION_FO to CORE_BUSINESS;
  

  Here is an example where u1 = GENERAL_INFORMATION and u2 = CORE_BUSINESS

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
  PL/SQL Release 10.2.0.1.0 - Production
  CORE    10.2.0.1.0      Production
  TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  SQL> create user u1 identified by u1;
  
  User created.
  
  SQL> grant create session, create table, unlimited tablespace to u1;
  
  Grant succeeded.
  
  SQL> create user u2 identified by u2;
  
  User created.
  
  SQL> grant create session, create table, unlimited tablespace to u2;
  
  Grant succeeded.
  
  SQL> connect u1/u1
  Connected.
  SQL> create table p(px int primary key);
  
  Table created.
  
  SQL> grant references on p to u2;
  
  Grant succeeded.
  
  SQL> connect u2/u2
  Connected.
  SQL> create table c(cx int primary key, y int);
  
  Table created.
  
  SQL> connect / as sysdba
  Connected.
  SQL> show user
  USER is "SYS"
  SQL> alter table u2.c
    2  add foreign key (y)
    3  references u1.p(px)
    4  enable
    5  validate;
  
  Table altered.
  

  Edited by: P. Forstmann on 15 Jan. 2011 10:12

  Edited by: P. Forstmann on 15 Jan. 2011 10:13

• The user lacks sufficient privileges to install Adobe Flash Player 11

  When you try to install the latest Adobe Flash Player 11 installation crashes and the message "the user doesn't have sufficient privileges to install Adobe Flash Player.

  I understand that it is a matter of administration, but I'm not clear where to go next, 74, semi and only read and write in "computer" questions It is a personal laptop, Windows 7 from Microsoft, no one else and no wireless network connected.

  Any advice would be much appreciated.

  PeterWilson39

  On the adobe forum - http://forums.adobe.com/thread/1151497

  Basically manually download the newest version installation file, right click and "run as Administrator". See if that helps.

  You can also go here - https://www.adobe.com/software/flash/about/ click on the Player Download Center, UN-click the 'offer in option' (generally chromium) unless you want it as well, click on install, save it to your desktop, right click and run.

  Verification of the AV

  It can be worth updating your AV package and run a full scan and then download, install, update and run a full scan with (free) Malwarebytes . Just in case.

• No sufficient privileges to install Flash Player.

  Original title: answers to others on this issue has not helped - sufficient privileges to install Flash Player

  After several attempts to install Flash Player, to see my pictures in Yahoo! Mail and get the same error message, I turn on the forum for help.

  I have looked for answers and found the instructions to get privileges, but it has not changed the problem.

  With the help of a laptop Lenovo with Windows 7 and I 10 e. No software other than Windows security.

  I am the only user, and from what I've read, I've already turned administrator rights.

  Link to a screenshot of the error message.

  Thanks in advance for any help.

  To avoid even more confusion (...), please report all further follow-up replies to your new thread-online http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/passwords-not-retained-in-ie-10-and-sites-incl-but/7643141a-4ef8-4368-9901-46fcfd6f2e07 (March 24, 2013 & ff)

  And please, don't start new threads on your problem of Flash (or Yahoo Mail). Thank you.

• Error 1925 you don't have sufficient privileges to perform this installation...

  I created an IE7 thinapp msi some of our users need to use a particular web application. From the test to the deployment, the following error message appears: Error 1925: you don't have sufficient privileges to complete this installation for all users of the machine. Log in as administrator and then try to install again. I have the MSIRequireElevatedPrivileges set to 0. Is there anything else I need to set to allow anyone to install this application? Thank you.

  Can you check by setting = 0 MSIDefaultInstallAllUsers? Make sure that you rebuild the package using build.bat

• Adobe Error 1303.  The installer has sufficient privileges to access this directory:

  Adobe Error 1303.  The installer has sufficient privileges to access this directory: C:\Programs Files (x 86) \Common Files\Adobe\ARM\1.0 when you try to update Adobe Reader 10.01 on a Windows 7, 64-bit machine.  What I found is that once I have let Adobe Updater download updates, the 1.0 folder is created under the ARM.  As long as I don't start the update, I can access this folder.  Once housing starts to update, if I try to access this folder I get an access denied message and the installation is defective with the 1303 error message.  I tried to make me the owner of the folder, try KB947821 running, turned off the firewall and close UAC, none of them running.  My guess is that there is a problem with the update itself changing the security.

  Someone has other ideas beyond to wait for the next update, that will hopefully work better than this one?

  Thank you!

  SMertz74

  Would it be possible for you to try my suggestions in the similar topic?

  http://forums.Adobe.com/message/3751776#3751776

• When you try to upgrade, get error that I don't have sufficient privileges

  I am trying to install the upgrade on my imac. When I move the firefox icon to my folder of the application, I get an error message:
  you don't have sufficient privileges. I have full administrative privileges on this machine

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Cannot update 3,010 FF.; Downloaded 3.6: impossible to copy in the app folder "the operation cannot be performed because you don't have sufficient privileges for some of the itemss.

  I had FF 3.0.10 for two years. My preferences are set to automatically check updates, my for a reason, it apparently never worked. I am the administrator for my Mac and have read/write permissions. The manual "check for update" under the menu help is disabled and will not work. " I tried to reset the permissions, quit and restart several times. At a given time, the window ' check for updates ' seems to be enabled, but froze when he started the download and came back to grey again. I tried to download 3.6 on your site, but when I try to drag FF in the app, I get a message that says "the operation cannot be performed because you don't have sufficient privileges for some of the items. Through it all, I noticed that my download folder is gone from the dock on my screen

  • Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  • Trash the current demand for Firefox to do a cleanup (re) install.
  • Install the new version you downloaded.

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• I can't install it last update for itunes on my pc. When I try and download it and it's over, he said, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

  I already tried uninstalling and reinstalling several times and that does not work, I simply get the same result.

  I start to download, through all the steps and when it is ready to be finished install it says in a pop-up, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

  Right-click on the downloaded installer and use run as administrator.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• When you try to install iTunes, error: "Setup has sufficient privileges to modify the files in C:/program files/iTunes.

  I received the following message, try to reinstall iTunes (because it stopped working) can someone tell me how to fix it? «The installer has sufficient privileges to modify the files in C:/program files/iTunes...» "Thank you in advance for your help.

  XP Home or XP Pro?  Are you logged on as administrator?

  Make sure that you have sufficient rights on the C:/program files/iTunes folder and its contents.  See the typical instructions here: http://helpx.adobe.com/creative-suite/kb/error-1321-or-1309-install.html (do the same for your ITunes folder & files)

  John

• Hello services did not start, check the sufficient privileges to start system services

  I have a Dell desktop computer - over 6 years running windows xp. I've been using itunes for several years, update without problem until a couple of months ago when I got this error "Hello services could not start, check the sufficient privileges to start system services. I tried to delete everything from itunes etc following the instructions from apple forum - but still get the error. I tried to restart Hello in the service of my computer menu - but now it doesn't show even Hello - I have tried to load Hello - same error... help - I don't want no Hello == I just need the latest version of itunes - now I have nothing. !

  Hello the long beach of dl,

  You need not run Hello service to have iTunes on your computer.

  You can look in the event viewer and see if there are errors on iTunes or the Hello Service.
  By default, the Hello service is started and the startup type is set to automatic.
  The path to the executable file is: C:\Program Files\Bonjour\mDNSResponder.exe. You can search and find this file?

  I find a 3rd party software removal tool and then have it remove all traces of iTunes, including the Bonjour service.
  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. QuickTime
  3. Apple Software Update
  4. Apple Mobile Device Support
  5. Hello
  6. Application of Apple Support (iTunes 9 or later)

  Download the latest version of iTunes for Windows, and then try to install again.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Message "Installer has sufficient privileges to modify this file" when you try to uninstall a program

  When I try to uninstall unwanted program I get a message "Installer has sufficient privileges to modify this file" I am the only administrator & user of this computer.  I use Vista M.S..

  [Moved from comments]

  Hi John,.

  1. Since when are you facing the issue?

  2. you have any security program installed on the computer?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:

  I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Method 3:

  I also suggest you to run a full scan using the Microsoft Safety Scanner and check for infections.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  See also:

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• What should I do if I get this message: __Service: 'ESET HTTP Server' (EHttpSrv) could not be installed. Make sure you have sufficient privileges to install system services

  What should I do if I get this message:
  Service: 'ESET HTTP Server' (EHttpSrv) could not be installed. Make sure you have sufficient privileges to install system services

  http://www.eset.EU/support/FAQ

  Read the FAQ.

  See you soon.

  Mick Murphy - Microsoft partner

• "Apple Mobile Device" failed to start. Check that you have sufficient privileges to start services system... then options to retry, cancel or continue without installing the component

  After using this computer for 7 months (purchased new in November) and iTunes worked perfectly well until the day he stopped to view the device option (one that shows which iPhone or I pad... etc connected it) and then you can sync devices. but this disappeared and iTunes could not re - download.

  I contacted Apple support and went through all the options to remove and re - download iTunes... but didn't ' work. Each time, after downloading the bulk of the program - he stops to give the following message is displayed:
  iTunes: cannot start Service "Apple Mobile Device" (apple Mobile Device). Check that you have sufficient privileges to start system services. »
  Help, please

  CSWUK

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923