Sum of cell does not

Similar Questions

• Pro 9.7 inch iPad, cell does not work as a hotspot

  in Switzerland, announced as working with Swiss internet telephony providers and can be used as a point of personal interest.

  It does not work. I took to an Apple store and they tried with my SIM card, with other models, like the Air2 iPad, and it shows Personal Hotspot on the setting.   But not on my version iPad 9.7 Pro cell.  So they took to their own view of the Apple store model, and it shows the same thing as my own iPad Pro, meaning does not show 'personal hotspot.  The Apple technician told me that it is a problem with the phone Sunrise provider.  But I have the iPhone 6, iPad Air2, and works with them very well. These shows 'personal hotspot.   I took the phone to Sunrise store, they verified my card, account and I tried with several of their models to shop with my SIM card, and everything worked.

  I got home, I took my card SIM is not working card from my iPhone, put in the Pro, but works with my Air2.  I took Swisscom, who works in the iPhone 6, iPad Air2, showing "personal hotspot" but not on my model Pro 9.7 inch iPad.   I tried all variants, all models are running on IOS 9.3.1.  the only combinations of different SIM cards and iPhones and iPads, the only combination does not show Personal Hotspot in the Setup menu is the Pro 9.7 inches iPad model.

  Shop Apple says nothing wrong with their product.  Sunrise said nothing wrong at their side, and I find myself alone.

  BTW, the Apple store staff may even not show me a working model, i.e. their display model of the iPad 9.7 Pro with cell with setting menu displaying Personal Hotspot power.  If they don't have a working model to show me, how can they say nothing wrong with Apple.

  Can someone help me?

  Try this:

  To install or configure a Wi - Fi mobile access point, follow these steps:

  Note: Cannot change parameters of portable Wi - Fi access point when a Wi - Fi connection sharing is enabled.

  1. From the home screen, tap settings.
  2. Click on Personal Hotspot.
     • If this option is not available, press on cell phone > Set Up Personal Hotspot to activate.
     • Your account must support this or you will receive a prompt to contact the customer service
  3. Press the switch to turn on Personal Hotspot.
     

• No service, submenu cell does not start every time

  Hello

  I use my IPhone 5S for a long time, but a week ago something happened and now I can't use my phone because it says 'no service '.

  I tried to enter the submenu of the 'Cell' settings, but whenever I try to click on 'Cellular' he kicks me settings. As an application that has a problem and does not work. Re - download will fix most of the applications, but I don't know what to do about this "cell". I checked common failures when the phone says 'No. Service' that's why I chose to open a topic to discuss if I can fix or repair.

  Is this a common problem? Are there measures to solve this problem? I took my phone to a local store to see if the phone is repairable, he said he has never seen a problem, something like this before. I'll go to the Apple Store as soon as possible, but in the meantime, I would like to find if there is any solution out there that I could try.

  Thank you!

  Restore iOS on your phone using iTunes.

  If this resolves the problem, you have a hardware failure.

• Game free cell does not

  Windows cell free game does not load under the start menu > games >...  Suggested previous posts go in Control Panel > programs and features > turn on or off this feature > games > (free cells is enabled).  I unchecked all games, computer rebooted, checked all the new games > restarted and without success.

  When clicking on the icon of free cell, all I get is a momentary flash of a command prompt window.  Too fast to see what he says.

  Using Windows Vista Home Premium edition.  Any help would be appreciated.

  Thanks, Karl

  Hi Karl,

  For how long have you had this problem?

  Follow the steps mentioned below and check if the problem persists.

  Step 1:

  Do the SFC scan on your machine and check whether it is related to missing or damaged system files.

  Step 2:

  I suggest you put your computer in a clean boot State, and check if this related to the conflict of third party software.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Test the issue in a new user account.

• Replicate the Partition-blood cells does not, it takes with the Mappings tab

  Hi all
  
  I create a partition replicated between 2 cubes on 9.3.1. The source cube has 8 dimensions (A Cube), and the target cube has 7 dimensions (Cube B).
  
  There is no such thing as 2 dimensions in A cube in Cube B and 1 Dimension of Cube B does not exist in the Cube.
  
  6 card dimensions directly.
  
  How address with 2 Dimensions in the cube that are mismatched cube B? At the moment I have mapped them (void) tab mappings, by selecting the name of the right dimension and by Sub in the target.
  
  Cube B a dimension called SBU. All the data in A Cube needs to go against Member UDF entry in Cube B. I'm stuck on how to do it?
  
  See you soon
  
  Simon
  
  Published by: SimonWatts on October 16, 2008 16:23

  In my view, the only question which might be wrong is the need to select a single member in the dimensions that remove you (through a mapping to urinate). 2 dims that exist in the cube has should be selected as the single Member for each mapped to invalidate. If you have selected the dimension in the partition, and only mapped the root to void, you would have a number of items do not match.

  Then, change the specifications of partition to use only one member in these dimensions (if necessary) and make sure that the Member you select is mapped to the vacuum, which is not a result the coast itself.

  Then, you do a mapping Sub similar to the UDF Member entry, "Sub ="Input SBU"". Who manages the new aspect of cell count, if the other dimensions align.

  In total, there are three identified mappings of this. Two card source member to urinate and one to map a member target to urinate.

• iPhone 6 cell does not work

  So for all a solid 3.5 weeks my iPhone 6 cell data / 4G at the top left of the screen remained at "search". I've talked with my provider, AT & T and we went through all the procedures to fix and which did not work. Since none of these things worked they have informed us that this is a problem with the phone and not the provider. These included procedures, resetting network settings, change of Sim cards with the same cell phone, ensuring that my iPhone is updated with the last update and just turn it and turn it back on phone. It would be great I might could get a tip or suggestion of someone to help me solve this problem. Thank you!

  Your iPhone is under warranty.  Take it to an Apple Retail Store or Apple authorized service provider and have them check it for you.

  UPDATE: when I said that your iPhone is under warranty, I assumed that you had an iPhone 6.  Now I'm re-reading your post and I see that you have listed iPhone 6 in several places.  So I don't know that you have.  If you have an iPhone 6, it is under warranty.  If you have an iPhone 6, it can be is no longer guaranteed.

• Highlighted text or cells does not

  Original title:

  Highlight the text or cells

  For these last days, it has become almost impossible to make one of the most fundamental things that I do in Windows: highlighting of text or copy and past, delete or modify cells.  Since Monday or Tuesday when I try to run this simple task, he did all sorts of other strange things, instead.  It will change the highlighted area, allows me not to choose more than one word, delete the part that I'm trying to highlight, or jump in a totally different window.  It's something that I did with ease for years.  It happens in Word, PDF and Excel.  I suspect, it can happen anywhere in Windows on my computer right now.  It's extremely frustrating.

  Pretty sure now that it was the new mouse.  I got a new mouse for over a month, if not totally sure why it's just started happening this week.  Perhaps, I gave up and hurt his little brain.

• sum of cases does not not pls help

  Hi all
  
  I have the following query with me
  

  select case when F.ITEM_UOM = 'Cubic Feet' then
              ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD))
          when F.ITEM_UOM =  'Pound' then
              ceil((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )
            when F.item_uom='Gallon'
       THEN ceil(ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*F.ITEM_PERCENT )
         end MAT_ACT,E.MANUAL,
         e.opn_job_desc,e.invoice_ref,e.invoice_ref_m,f.item_number,f.item_name,f.item_uom,f.description,J.OPN_VALUE
       FROM xxnp_opn_joblog_001 E,
            XXNP_OPN_JOBLOG_EST_002   F,
            XXNP_OPN_JOBLOG_STAGE_002 G,
            XXNP_OPN_JOBLOG_SLURRY_003 H,
              XXNP_OPN_JOBLOG_RES_005 J
        WHERE E.OPN_JOB_DESC   = E.OPN_JOB_DESC AND E.MANUAL='N'
         and J.opn_resource_desc='4X4  PICK-UP OR LIGHT VEHICLES'
          AND E.OPN_JOBLOG_001_ID = J.OPN_JOBLOG_001_ID 
        AND E.OPN_JOBLOG_001_ID = G.OPN_JOBLOG_001_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID
  
  i require these two columns(1) [sum(case stmnt of cubicfeet)*0.047+sum(case stmnt ofpound)*0.0005]*(distance/2)as COL1
              (2)SUM(case stmnt of cubic feet )as CUFT
  so i did this as given below but the values are not getting summed :(
  distance/2 is J.OPN_VALUE/2
  
  select round((sum(case when F.ITEM_UOM = 'Cubic Feet' then
              ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD ))else 0 end)*0.047
         +sum(case when F.ITEM_UOM =  'Pound' then
              ceil((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )else 0 end)*0.0005)*
                 (J.OPN_VALUE/2))COL1,sum(case when F.ITEM_UOM = 'Cubic Feet' then
              ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD ))else 0 end)CUFT,
                  e.opn_job_desc,e.invoice_ref,e.invoice_ref_m,f.item_number,f.item_name,f.item_uom,f.description,J.OPN_VALUE
       FROM xxnp_opn_joblog_001 E,
            XXNP_OPN_JOBLOG_EST_002   F,
            XXNP_OPN_JOBLOG_STAGE_002 G,
            XXNP_OPN_JOBLOG_SLURRY_003 H,
              XXNP_OPN_JOBLOG_RES_005 J
        WHERE E.OPN_JOB_DESC   = E.OPN_JOB_DESC AND E.MANUAL='N'
         and J.opn_resource_desc='4X4  PICK-UP OR LIGHT VEHICLES'
          AND E.OPN_JOBLOG_001_ID = J.OPN_JOBLOG_001_ID 
        AND E.OPN_JOBLOG_001_ID = G.OPN_JOBLOG_001_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID
  group by  e.opn_job_desc,e.invoice_ref,e.invoice_ref_m,f.item_number,f.item_name,f.item_uom,f.description,J.OPN_VALUE

  kindly help me to register the two above columns COL1 CUFT AND my first request
  
  thanking in advance
  
  
  concerning
  oracleuser
  
  Published by: makdutakdu on January 28, 2010 08:22
  
  Published by: makdutakdu on January 28, 2010 11:33

  My mistake

  select ROUND((sum(case when item_UOM = 'Cubic Feet' then mat_act else 0 end)*0.047
         + sum(case when item_uom = 'Pound' then mat_Act else 0 end)*0.0005)*(OPN_VALUE/2)) col1
  , opn_job_desc,OPN_VALUE, sum(case when item_uom = 'Cubic Feet' then mat_act else 0 end) ol2
  from (
  select case when F.ITEM_UOM = 'Cubic Feet' then
              ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD))
          when F.ITEM_UOM =  'Pound' then
              ceil((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )
            when F.item_uom='Gallon'
       THEN ceil(ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*F.ITEM_PERCENT )
         end MAT_ACT,E.MANUAL,
         e.opn_job_desc,e.invoice_ref,e.invoice_ref_m,f.item_number,f.item_name,f.item_uom,f.description,J.OPN_VALUE
       FROM xxnp_opn_joblog_001 E,
            XXNP_OPN_JOBLOG_STAGE_002 G,
            XXNP_OPN_JOBLOG_SLURRY_003 H,
              XXNP_OPN_JOBLOG_RES_005 J,
              XXNP_OPN_JOBLOG_EST_002   F
             left outer join
              MTL_SYSTEM_ITEMS_FVL P on
                    F.ITEM_NUMBER=P.SEGMENT1 AND
            F.ITEM_NAME=P.SEGMENT2 AND F.ITEM_UOM=P.PRIMARY_UNIT_OF_MEASURE
        where E.OPN_JOB_DESC   = E.OPN_JOB_DESC AND E.MANUAL='N'
         and J.opn_resource_desc='4X4  PICK-UP OR LIGHT VEHICLES'
          AND E.OPN_JOBLOG_001_ID = J.OPN_JOBLOG_001_ID
        AND E.OPN_JOBLOG_001_ID = G.OPN_JOBLOG_001_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID
          AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID
          AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID) group by opn_job_desc,OPN_VALUE
  

  It really because it is very difficult to write the query without table structure, data not just based on the imagination.

  Concerning

• VALIGN in table cells does not

  I'm trying to change the vertical alignment of the content in a table of a checkerboard to fluid. Before you set the table in the grid of fluid (I did in a document separate html5), alignment was fine, but when I copied it in, VALIGN had no effect and all default values contained to the top of the cell. Is it possible that I can change this? I tried to reset the VALIGN after copying into the grid of fluid, and the code in the table reflects that it should be aligned to the bottom, but he always appears at the top, in Dreamweaver and I tested it in all browsers.

  Thanks in advance.

  Hi guys -.

  I fear that you practice these obsolete methods page layout, you're in for a lot of problems.

  Take a look at the "errors" reported by the W3C validator

  http://validator.w3.org/check?URI=http%3A%2f%2Fwvadmin.DNS-systems.NET%2FtestHome.html&Cha rset = % 28detect + automatically 29% & doctype = Inline & group = 0

  I put your logo and header text in the same container and left float image.

• SQLPLUS sum/bytes displays does not correctly

  Please help - I must be missing a variable formatting in sql * more. I am running 10.2.0.4
  
  
  02:02:05 SYSTEM_DPERTS@prd000l > select master, sum (blocks), Totalblocks, sum (bytes) TotalBytes of
  2 dba_segments group owner;
  
  TOTALBLOCKS TOTALBYTES OWNER
  ------------------------------ ----------- ----------
  SYSTEM $2 832 #.
  MONITOR $56 #.
  SYS ######## ########
  TSMSYS $32 #.
  MQNGUYEN $3 616 #.
  ODS $10 672 #.
  EXFSYS $232 #.
  MOMENTUM # #.
  WMSYS $912 #.
  CCRC ######## ########
  OUTLN $72 #.
  SJOHN $16 #.
  UFMS $2 632 #.
  DBSNMP $208 #.
  AI $848 #.
  WMAUDIT # #.
  
  16 selected lines.
  
  02:03:17 SYSTEM_DPERTS@prd000l >

  SQL > columnTOTALBYTES format 999,999,999,999,999,999

• BlackBerry Smartphones cell does not illuminate

  Buenas tardes, hace 2 dias tengo el modelo priv, no black as el mismo encienda he conectado tanto lo has the cargador pc como al pared, y no none lights carga luz, el mismo estaba in uso y al entrar in death nunca volvió a encender, necesitaria alguna Orientación, gracias

  good afternoon the disadvantage has been resolved, I pressed the button for 30 seconds and the phone has been reset

• Cards Oracle does not work inside a table cell?

  Hi all
  
  I've been using Oracle cards without a table, but now I need to put the screen (& lt; div & gt ;) within a cell of table for organization purposes. I noticed that it is not simply a map if I put it here.
  
  It works and displays the map:
  

  <body onLoad="loadMainMap()">
        <div id="map_div" style="left:0px; top:0px; width:100%; height:100%; border:2px solid"></div>
  </body>

  It does not display the map (the table and div are there, but no map is displayed):
  

  <body onLoad="loadMainMap()">
      <table>
          <tr>
          <td>
                  <div id="map_div" style="left:0px; top:0px; width:100%; height:100%; border:2px solid"></div>
          </td>
          </tr>
      </table>
  </body>

  I'm doing something wrong?
  
  Thanks in advance,
  ~ Ruben Jorge

  The table does not have its specified size, its size is determined by its cells. The cell does not have the specified size, and its size is determined by its content, the map DIV DIV. size plan is 100%, 100%, which is proportional to the size of the table cell, which does not have a size. Thus, the browser guess its size is 0px, 0px.

  To resolve this problem, you must specify the size of the table (relative or absolute), or the absolute size of the div. of card

  
  
  
  
  

  < div id = "map_div" style = "left: 0px;" Top: 0px; Width: 100%; height: 100%; border: 2px solid "> < / div >"

  Published by: jxyang on May 11, 2009 07:44

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• In numbers, I can't use then "/" operator to divide 2 cell, when I use may 7 does not appear "/", appear.

  In numbers, I can't use then ' / ' operator to divide 2 cell, when I use Shft + 7 does not appear "/", appear ' + '.

  Apple saw fit to replace the ' / ' with the Obelus ("÷") that often resembles a plus.  Look very carefully and you will see the point above and below the line.

  Also if you look at the result, 6/3 is 2 step 8 if the operator acted as the addition operator

• In number. How do I lock you in a function such as highlighting a cell so it does not disappear when you move to another cell.

  In number. How can I lock you in a function such as highlighting a cell so that it does not disappear when you move to another cell.

  Hi Philil,

  Do you mean pointing out the contents of a cell, or "stressing" the cell itself (by placing an on bottom border)?

  Formatting content will transfer to another cell if you fill in the other cell content, or copy from a single cell and pasting it into another.

  Borders applied to a cell or group of cells may be applied to another cell or group of cells by selecting the first cell (single click), the format of this cell or a group of cells copy (Format (menu) or option + command + C > copy Style), and then selecting one or more other cells and stick to the format (Format (menu) or command-option-v > paste Style.)

  'Format' in the case of cells includes the color fill, color text and other text attributes, content, format (text, number, date & time, duration...), borders...

  When you copy the style, all format attributes are copied.

  Kind regards

  Barry