Sum of the values of the previous rows in a PivotTable

Similar Questions

• incremensum under condition (condition is the value of the sum of the previous line)

  Hello
  I know that is a little tricky but I need to know the credit of a client after each invoice.
  so if sum(invoice_val-previous_credit) > 0, then the credit is 0 credit else is previous_credit-invoice_val.
  As you can see to dermine the credit value of the current row, it is necessary to check the value of the previous row. Is it possible to somehow?
  
  E.G.
  If the situation in the table is the following:

  ID_CLIENT     ID_invoice     invoice_VAL
  8.789     220.227     120,47
  8.789     238.342     109,76
  8.789     246.388     121,69
  8.789     258.163     137,45
  8.789     268.969     138,67
  8.789     295.455     145,16
  8.789     311.395     138,92
  8.789     327.104     138,96
  8.789     340.793     -335,18
  8.789     375.451     129,14
  8.789     386.650     125,57
  8.789     398.606     124,18
  8.789     428.166     31,66
  8.789     435.844     25,93
  8.789     447.639     34,32
  8.789     462.137     -43,64
  8.789     475.613     -110,39
  8.789     485.022     92,29
  8.789     495.807     91,67

  I need something like this:

  ID_CLIENT     ID_invoice     invoice_VAL credit
  8.789     220.227     120,47     0,00
  8.789     238.342     109,76     0,00
  8.789     246.388     121,69     0,00
  8.789     258.163     137,45     0,00
  8.789     268.969     138,67     0,00
  8.789     295.455     145,16     0,00
  8.789     311.395     138,92     0,00
  8.789     327.104     138,96     0,00
  8.789     340.793     -335,18     335,18
  8.789     375.451     129,14     206,04
  8.789     386.650     125,57     80,47
  8.789     398.606     124,18     0,00
  8.789     428.166     31,66     0,00
  8.789     435.844     25,93     0,00
  8.789     447.639     34,32     0,00
  8.789     462.137     -43,64     43,64
  8.789     475.613     -110,39     154,03
  8.789     485.022     92,29     61,74
  8.789     495.807     91,67     0,00

  Thank you very much
  
  Published by: 4ndr34 on January 28, 2010 13:38

  Hello

  4ndr34 wrote:
  Thanks, but the model is not available in oracle9 :(

  Are - that you mentioned before?
  It's a good idea to include your version number whenever you ask a question, especially if the version is as old as Oracle 9.

  Here's an analytical solution that must work at Oracle 9 (and more):

  WITH     e     AS
  (
       SELECT     hiredate
       ,     CASE
                 WHEN  job     IN ('PRESIDENT', 'SALESMAN')
                 THEN  -sal
                 ELSE  sal
            END     AS sal2
       ,     ROW_NUMBER () OVER ( ORDER BY  hiredate
                                 ,            empno
                         ) AS rnum
       FROM     scott.emp
  )
  ,     got_grp_start     AS
  (
       SELECT     h.*
       ,     CASE
                 WHEN  sal2 >= 0
                 THEN  0
                 WHEN  EXISTS ( SELECT    NULL
                                   FROM      e   l
                             JOIN      e   m     ON     m.rnum     >= l.rnum
                             WHERE     l.rnum     < h.rnum + 0     -- See note below
                             AND      m.rnum     < h.rnum + 0     -- See note below
                             GROUP BY      l.rnum
                             HAVING      SUM (m.sal2) < 0
                           )
                 THEN  0
                 ELSE  1
            END          AS grp_start
       FROM     e     h
  )
  ,     got_grp          AS
  (
       SELECT     got_grp_start.*
       ,     SUM (grp_start) OVER (ORDER BY rnum)     AS grp
       FROM     got_grp_start
  )
  SELECT     hiredate
  ,     sal2
  ,     GREATEST ( SUM (-sal2) OVER ( PARTITION BY  grp
                                          ORDER BY         rnum
                          )
             , 0
             )     AS credit
  FROM     got_grp
  ORDER BY     rnum
  ;
  

  The EXISTS subquery in got_grp_start does not work (at least in Oracle 10.2.0.3.0 or 11.1.0.6.0) if it refers to "h.rnum", but it does if it refers to "h.rnum + 0" or "h.rnum - 0". ".

  The sole purpose of subquery e is to produce a useful set of raw data, including a simple expression (rnum) that can be used in sorting. You probably have something like e, according to your actual table.

  If you need a separate calculation for, say, all the departments, and then add PARTITION BY analytical clauses.

• Table expanding: calculation of the difference in the value of the previous row

  Hello

  I'm a complete newbie to LiveCycle Designer (ES2) and created under the document with a table in full expansion.

  Shared files - Acrobat.com

  My goal is to make the friendly form by adding a calculation in the field "Twist" that calculates the difference of the current line to the previous row.

  I have no idea about Java Script, I'm afraid and also do not know if this is possible at all, so it's probably a bad idea after all.

  The reason for setting up as a table expansion is so that the form can be used for all 32 instances form would be used for (they all need different number of rows in total).

  The calculation will start in row 2 (Checklist.Table1), take the value of the entry in row 2 torsion and calculate the difference in the value of the twist entry in row 1.

  Then, in row 3, it calculates the difference between the value of the twist in the row 3 tier 2, etc.

  So subtract the value of the field in theⁿ with the value line online^n-1 or something in that sense.

  Is there anyone at all who could help me with that at all?

  I would be very grateful for any advice you could give me.

  Thank you very much!

  Mathilda

  Hi Matilda,.

  Try this code;

  if (Row1.index > 0 && !Row1.resolveNode("NumericField4[0]").isNull)
  
   var prevTwist = Table1.resolveNode("Row1[" + (Row1.index - 1) + "].NumericField4[0]").rawValue
  
   var result = Math.abs(3000 / (Row1.resolveNode("NumericField4[0]").rawValue - prevTwist));
  
   this.rawValue = result;
  
   this.rawValue = "";
  

  Concerning

  Bruce

• By subtracting the previous row less the current line in SQL

  I have a table - orders.

  How to subtract the previous row less line current for incoming column

  

  If anyone can help.

  Hello

  It is not clear what you want. What is the previous row? What order to examine DATE_IN?

  Here is an example of using the function DATE_IN LAG to retrieve the previous value of the line consider the sort column.

  WITH commands LIKE (select to_date (27 May 2015 ', ' dd/mm/yyyy') date_in, 83 of the double incoming_vol)

  Union of all the

  Select to_date (May 26, 2015 ', ' dd/mm/yyyy') date_in, 107 double incoming_vol

  Union of all the

  Select to_date (May 25, 2015 ', ' dd/mm/yyyy') date_in, 20 incoming_vol of the double

  Union of all the

  Select to_date (May 24, 2015 ', ' dd/mm/yyyy') date_in, 7 incoming_vol of the double

  Union of all the

  Select to_date (May 22, 2015 ', ' dd/mm/yyyy') date_in, 71 double incoming_vol

  )

  SELECT date_in

  incoming_vol,

  NVL (lag (incoming_vol) (date_in release order), 0)-incoming_vol previous_row_minus_current_row

  Orders

  ORDER BY 1 desc;

  DATE_IN INCOMING_VOL PREVIOUS_ROW_MINUS_CURRENT_ROW

  ----------- ------------ ------------------------------

  27/05/2015 83 24

  26/05/2015-107-87

  25/05/2015-20-13

  24/05/2015             7                             64

  22/05/2015-71-71

  If this isn't what you want then please give the expected results.

• find the cumulative sum of the previous columns

  Hello
  
  How can I get the cumulative sum of a particular column in the preceding lines in the current line.
  e.g. I have a table produced,
  
  Date | Orders
  __________________
  1 JANUARY 10 | 3
  JANUARY 2, 10. 5
  JANUARY 3, 10. 1
  
  I want to select the date and orders between the 1st and the 3rd. Something like...
  Select the Date, the orders for products where Date between to_date('1-JAN-10') and to_date('3-JAN-10')
  
  But I want the output like this...
  
  Date | Orders
  __________________
  1 JANUARY 10 | 0
  JANUARY 2, 10. 3
  JANUARY 3, 10. 8
  
  Similarly, when I select it between 2 and 3, I want the output voltage...
  
  Date | Orders
  _________________
  JANUARY 2, 10. 3
  JANUARY 3, 10. 8
  
  and so on. In the output, orders here are the cumulative sum of the previous columns.
  
  Published by: eric clapton, November 8, 2010 20:45

  Hello

  Use the analytical SUM function.
  You want to filter by date after the cumulative SUM is calculated, so calculate the SUM in a subquery, then filter by date no later than:

  WITH     got_cm_orders     AS
  (
       SELECT     dt
       ,     orders
       ,     SUM (orders) OVER (ORDER BY dt) - orders
                 AS cm_orders
       FROM     products
  )
  SELECT     dt
  ,     orders
  WHERE     dt     BETWEEN     DATE '2010-01-02'
            AND     DATE '2010-01-03'
  ;
  

• Hide a field value based on the value of the previous row

  I need to read the string before the underscore (_) and show that the value in the 1st row for the field of Value1. For example, if the previous string (ABCDE) is equal to that of the second line I need to hide the value (100) on the field of the value1.

  Sample data:

  Report ID	Val1	Val2	Val3
  ABCDE_01	100	200	300
  ABCDE_02	100	250	350
  XYZ	500	60	28

  Final results:

  Report ID	Value1	Value2	Value3
  ABCDE_01	100	200	300
  ABCDE_02		250	350
  XYZ	500	60	28

  I am using code below but error.

  <? If: xdoxslt:get_variable($_XDOCTX,_'x')! = substr (REPORT_ID, 0, instr(REPORT_ID, '_', 0) - 1)? >

  <? Value1? >

  <? end if? >

  <? xdoxslt:set_variable ($_XDOCTX, 'x', substr (REPORT_ID, 0, (instr(REPORT_ID, '_', 0)-1)))? >

  You can use this condition instead:

  It will manage both of your cases.

• How to get the sum of the first row in the previous row?

  Dear gurus... I need to get the sum of a column of the first row of my result set to the previous line based on a condition. I read analytical functions for this but they provide the sum of the first rank to Current Row through declaration "rows between Unbounded preceding and current line. Y at - it a statement that calculates the sum as "rows between Unbounded preceding and previous row?

  Hello

  kamranpathan wrote:
  Dear gurus... I need to get the sum of a column of the first row of my result set to the previous line based on a condition. I read analytical functions for this but they provide the sum of the first rank to Current Row through declaration "rows between Unbounded preceding and current line.

  If you do not explicitly give a windowing clause, then you get the default windowing clause you indicated.
  If you want another clause of windowing, ionclude in the analytic function call.

  Y at - it a statement that calculates the sum as "rows between Unbounded preceding and previous row?

  Yes. The correct syntax for "Previous rank" is «PREVIOUS 1»

  ...  ROWS BETWEEN  UNBOUNDED PRECEDING
              AND        1          PRECEDING
  

  For more information, search for "Analytic Functions" in the manual of the SQL language:
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17118/functions004.htm#sthref917

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.
  You will find the answers better faster if you always provide this information whenever you post a question.

  Published by: Frank Kulash, Sep 17, 2011 17:04
  I just saw Etbin responses.
  As usual, Etbin has a good point. If the column that you are basically cannot be NULL, then it is probably easier to subtract the total current line and use the default windowing clause.
  Even if it can be null, you find may be easier to use this approach.

• Need help to write the query to extract the value of the previous row - Lag not help

  
  Hello

  I created follwing table.

  Create table test

  (number of fi,

  number of fo_fv

  number of jup_fv

  action varchar2 (10)

  );

  insert into TEST(1,1,1,'LOAD');

  Insert into TEST (2, NULL, 2, "ROLL");

  insert into TEST(3,,3,'ROLL');

  insert into TEST(4,,4,ROLL);

  insert into TEST (5,2,5,LOAD);

  I want the result of the query as below:

  FI FO_FV JUP_FV ACTION

  -------------------------------------------------------------------

  1          1                    1                    LOAD

  2          1                    2                    ROLL

  3          1                    3                    ROLL

  4          1                    4                    ROLL

  5          2                    5                    LOAD

  Help, please.

  Thank you!

  SQL > select fi
  2, max (fo_fv) on fo_fv (fi control)
  3, jup_fv
  4, action
  5 of the test;

  FI FO_FV JUP_FV ACTION
  ---------- ---------- ---------- ----------
  1 1 1 LOAD
  ROLL OF 2 1 2
  3 1 3 ROLL
  4 1 4 ROLL
  5 2 5 LOAD

  OR

  SQL > select *.
  2 test
  model 3
  Dimension 4 by (fi)
  5 measures (fo_fv, jup_fv, action)
  6 rules
  7   (
  8 fo_fv [any] = case when fo_fv [cv ()] is null
  9. can fo_fv [cv () - 1]
  10 fo_fv [cv () else]
  11 end
  (12);

  FI FO_FV JUP_FV ACTION
  ---------- ---------- ---------- ----------
  1 1 1 LOAD
  ROLL OF 2 1 2
  3 1 3 ROLL
  4 1 4 ROLL
  5 2 5 LOAD

• obtaining the previous value of the previous row

  Hello
  
  My desired output should be
  
  ID Book_date credit Previous_Credit
  123IT1 08/12/2008 100800 72500
  
  
  in this table:
  
  ID book credit date
  123IT1 08/12/2008 100800
  123IT1 12/18/2007 72500
  123IT1 14/11/2006 150720
  
  I tried to use the function of leader, but I have a problem when I included the condtion Beach date:
  
  This is my query:
  
  SELECT id, book_date, lead (credit), credit (any order of rownum) as previous_credit
  t
  "where book_date between 1 December 2008 and 31 December 2008"
  
  Result
  
  ID Book_date credit Previous_Credit
  123IT1 08/12/2008 100800
  The previous_credit column is always empty. I think because of the date range... ?
  
  No idea how to get the right result? pls help

  with t as ( -- generating sample data
  select '123IT1' id, to_date('12/8/2008', 'mm/dd/yyyy') book_date, 100800 credit from dual union
  select '123IT1', to_date('12/18/2007', 'mm/dd/yyyy'), 72500 from dual union
  select '123IT1', to_date('11/14/2006', 'mm/dd/yyyy'), 150720 from dual
  )
  --
  -- actual query
  --
  select *
  from ( select id
         ,      book_date
         ,      credit
         ,      lag(credit) over (partition by id order by book_date) as previous_credit
         from   t
       )
  where  book_date between to_date('12/01/2008', 'mm/dd/yyyy') and to_date('12/31/2008', 'mm/dd/yyyy')
  

• date of breach varies at continuous intervals and ending date of the previous row

  Hello
  can someone give me an idea for situation below
  
  I have a table with records

  CREATE  TABLE test1
    (
      key VARCHAR2(11 BYTE) NOT NULL ENABLE,
     cd VARCHAR2(10 BYTE) NOT NULL ENABLE,
          start_dt DATE NOT NULL ENABLE,
      end_dt date,
      CONSTRAINT x1 PRIMARY KEY (key, cd, start_dt));
      
  Insert into test1 (key,cd,start_dt,end_dt) values ('1234','A',to_date('01-MAR-78 00:00:00','DD-MON-RR hh24:mi:ss'),to_date('31-DEC-99 00:00:00','DD-MON-RR hh24:mi:ss'));
  Insert into test1 (key,cd,start_dt,end_dt) values ('1234','B',to_date('01-MAR-78 00:00:00','DD-MON-RR hh24:mi:ss'),to_date('31-DEC-99 00:00:00','DD-MON-RR hh24:mi:ss'));
  Insert into test1 (key,cd,start_dt,end_dt) values ('1234','Q',to_date('01-JAN-89 00:00:00','DD-MON-RR hh24:mi:ss'),to_date('31-JAN-97 00:00:00','DD-MON-RR hh24:mi:ss'));
  Insert into test1 (key,cd,start_dt,end_dt) values ('1234','B',to_date('01-FEB-97 00:00:00','DD-MON-RR hh24:mi:ss'),to_date('30-APR-97 00:00:00','DD-MON-RR hh24:mi:ss'));
  insert into test1(key,cd,start_dt,end_dt) values ('1234','Q',to_date('01-FEB-97 00:00:00','DD-MON-RR hh24:mi:ss'),to_date('30-APR-97 00:00:00','DD-MON-RR hh24:mi:ss'));
  Insert into test1 (key,cd,start_dt,end_dt) values ('1234','B',to_date('01-MAY-97 00:00:00','DD-MON-RR hh24:mi:ss'),to_date('31-MAR-99 00:00:00','DD-MON-RR hh24:mi:ss'));
  commit;
  
  key     cd     start_dt                     END_DT
  1234     B     01-MAR-78 00:00:00     31-DEC-99 00:00:00
  1234     A     01-MAR-78 00:00:00     31-DEC-99 00:00:00
  1234     Q     01-JAN-89 00:00:00     31-JAN-97 00:00:00
  1234     Q     01-FEB-97 00:00:00     30-APR-97 00:00:00
  1234     B     01-FEB-97 00:00:00     30-APR-97 00:00:00
  1234     B     01-MAY-97 00:00:00     31-MAR-99 00:00:00

  I want to merge the range date lines that overlap, break at intervals and set the indicator (A_IND, B_IND, Q_IND) accordingly. (IE, if a record in the source has a value for the 'cd' = 'B' column in a given date range, then the output should display 'Y' for the B_IND column for the date ranges in the source folder.)
  I want also to the date of the end of each record to be 1 day less than the start_dt of the next record, as shown below.
  and the output should be

  key     start_dt                          END_DT     A_IND     B_IND     Q_IND
  1234     01-MAR-78 00:00:00     31-DEC-88 00:00:00     Y     Y     N
  1234     01-JAN-89 00:00:00     30-JAN-97 00:00:00     Y     Y     Y
  1234     31-JAN-97 00:00:00     31-JAN-97 00:00:00     Y     Y     N
  1234     01-FEB-97 00:00:00     29-APR-97 00:00:00     Y     Y     Y
  1234     30-APR-97 00:00:00     30-APR-97 00:00:00     Y     Y     N
  1234     01-MAY-97 00:00:00     30-MAR-99 00:00:00     Y     Y     N
  1234     31-MAR-99 00:00:00     31-DEC-99 00:00:00     Y     Y     N

  Hello

  user12997203 wrote:
  Hello
  can someone give me an idea for situation below

  I have a table with records

  CREATE  TABLE test1 ...
  

  Thanks for the display of the data of the sample; It is very useful.

  I want to merge the range date lines that overlap, break at intervals and set the indicator (A_IND, B_IND, Q_IND) accordingly. (IE, if a record in the source has a value for the 'cd' = 'B' column in a given date range, then the output should display 'Y' for the B_IND column for the date ranges in the source folder.)

  Do not assume that everyone who wants to help you is familiar with your application and your needs. Explain what key role plays in this problem. See {message identifier: = 10865697}.
  Here's one way:

  WITH     change_points       AS
  (
       SELECT     key
       ,     start_dt     AS dt
       FROM     test1
      UNION
       SELECT     key
       ,     end_dt          AS dt
       FROM     test1
  )
  ,     ranges          AS
  (
       SELECT  key
       ,     dt                    AS start_dt
       ,     LEAD (dt)     OVER ( PARTITION BY  key
                                      ORDER BY          dt
                         )          AS next_dt
       FROM     change_points
  )
  SELECT    r.key
  ,       r.start_dt
  ,       r.next_dt - CASE
                       WHEN  r.next_dt = MAX (r.next_dt) OVER ()
                  THEN  0
                  ELSE  1
                    END                         AS end_dt
  ,       MAX (CASE WHEN t.cd = 'A' THEN 'Y' ELSE 'N' END)     AS a_ind
  ,       MAX (CASE WHEN t.cd = 'B' THEN 'Y' ELSE 'N' END)     AS b_ind
  ,       MAX (CASE WHEN t.cd = 'Q' THEN 'Y' ELSE 'N' END)     AS q_ind
  FROM       ranges     r
  JOIN       test1          t  ON   t.key          = r.key
                      AND     t.start_dt     < r.next_dt
                    AND     t.end_dt     > r.start_dt
  GROUP BY  r.key
  ,            r.start_dt
  ,       r.next_dt
  ORDER BY  r.start_dt
  ;
  

  Note that this depends on the values that you want in the columns a_ind, b_ind and q_ind. For example, if you were doing this for users of German language, you might want to show 'J' and 'n' instead of 'Y' and 'n'. In this case, you would use MIN instead of MAX, to get the dominant value.

• Store the new values in the table in the new row so that the 'old' remains in the previous lines

  Hello

  I am a student of genius embedded. I did a VI where I change the values of digital controls, and it saves it as a table.
  I want to store the pair of new values in the new row of this table.
  I have attached a VI where I can change the values of numeric control, as well as the number of lines from another control. But when I change the values, all values in the output table change including values in the previous row. I want these lines to be unchanged and that new line to update.

  Need help.

  If I understand correctly, you want to always 4 models. If so a 2D table will do the trick (see annex VI), otherwise crossrulz' solution should work.

• Difference between the current and previous row in a table

  Hi all
  
  I'm having a problem with the request. Some help please can me?
  
  I need to get the difference between the previous row and current row in a table. I have a table, given as below.
  
  TABLEX
  ================
  
  Date items name
  
  AAA 100 01 - SEP - 09
  BBB 101 02 - SEP - 09
  CCC 03-AUG-09 200
  DDD 200 04 - SEP - 09
  EEE 05-SEP-09 400
  
  Now, I need to get an output like below...
  
  Name Date of items Diff-items
  
  AAA 01 / SEP / 09 100 0
  BBB 1 101 02 - SEP - 09
  CCC 03-AUG-09 200 99
  DDD 04-SEP-09 200 0
  EEE 05-SEP-09 400 200
  
  Can someone help me write a query to get above the results?
  Please let me know if you need more information.
  
  Thank you very much in advance.
  
  We use Oracle10G (10.2.0.1.0).
  
  Thank you
  Asif

  If you have found your answer, mark it as answered. Thank you.

• APEX 4.2.5: How reference a column element in the previous line?

  Good afternoon

  I have the following problem:

  I have an IR on a table that contains the values of daily clock of energy (gas and electricity).

  Now, I want to set up a calculated column that contains the daily consumption.
  Power_actual_row - power_previous line.

  Is this possible and if yes how can I achieve this?

  Kind regards.

  Wilfried

  Baerenmarke wrote:

  I have the following problem:

  I have an IR on a table that contains the values of daily consumption of energy (gas & electricity) clock.

  Now, I want to set up a calculated column that contains the daily consumption.
  Power_actual_row - power_previous line.

  Is this possible and if yes how can I achieve this?

  Add a POWER_PREVIOUS column to your report query using the analytical function LAG to access the value of the POWER of the previous row. Use the ORDER byclause in the function to determine the order of the lines. The calculation of the IR then simply uses the POWER and POWER_PREVIOUS values for the same line.

• sum of the values in a row

  Hello
  
  I have a table table1 with the columns a, b, c and d
  
  I get some results this table using this query:
  
  SELECT
  a,
  b,
  sum (case when c = 'F' then '1' other '0' end) 'c_data. "
  sum (case when d = s 'then ' 1' other end '0') "d_data".
  Of
  Table1:
  WHERE
  a = 'a value '.
  GROUP BY
  b
  
  My result will be like this:
  a d_data of c_data to b
  ABCD efg 1 1
  Fund fjd 1 0
  DFD fd 0 0
  
  Now I need a 5th column, which should look like this: -.
  a b c_data d_data Total
  ABCD efg 1 1 2
  Fund 1 0 1 fjd
  DFD fd 0 0 0
  
  Please someone change and give me the above query?

  Double wire.
  sum of the values in a row

  Please close.

• Insert row into table 2D retaining the previous values

  Amendment of data entered in a 2D array and also displayed a table. When the time rolls 3 columns of data are held and then created line. Problem is the line moves downwards, but the previous data is not stored. I tried using shift register, but that only auto markings lines table to fill as the iteration of the loop. Looks like a basic really simple problem but going round in circles on this one there...

  In this case, the function 'Replace table subset' is what is needed to replace the last values in line with the current values of the user interface.

  On the evolution of the time, an addition occurs.

  An update of the VI is attached.