Store the new values in the table in the new row so that the 'old' remains in the previous lines

Hello

I am a student of genius embedded. I did a VI where I change the values of digital controls, and it saves it as a table.
I want to store the pair of new values in the new row of this table.
I have attached a VI where I can change the values of numeric control, as well as the number of lines from another control. But when I change the values, all values in the output table change including values in the previous row. I want these lines to be unchanged and that new line to update.

Need help.

If I understand correctly, you want to always 4 models. If so a 2D table will do the trick (see annex VI), otherwise crossrulz' solution should work.

Tags: NI Software

Similar Questions

  • incremensum under condition (condition is the value of the sum of the previous line)

    Hello
    I know that is a little tricky but I need to know the credit of a client after each invoice.
    so if sum(invoice_val-previous_credit) > 0, then the credit is 0 credit else is previous_credit-invoice_val.
    As you can see to dermine the credit value of the current row, it is necessary to check the value of the previous row. Is it possible to somehow?

    E.G.
    If the situation in the table is the following:
    ID_CLIENT     ID_invoice     invoice_VAL
8.789     220.227     120,47
8.789     238.342     109,76
8.789     246.388     121,69
8.789     258.163     137,45
8.789     268.969     138,67
8.789     295.455     145,16
8.789     311.395     138,92
8.789     327.104     138,96
8.789     340.793     -335,18
8.789     375.451     129,14
8.789     386.650     125,57
8.789     398.606     124,18
8.789     428.166     31,66
8.789     435.844     25,93
8.789     447.639     34,32
8.789     462.137     -43,64
8.789     475.613     -110,39
8.789     485.022     92,29
8.789     495.807     91,67
    I need something like this:
    ID_CLIENT     ID_invoice     invoice_VAL credit
8.789     220.227     120,47     0,00
8.789     238.342     109,76     0,00
8.789     246.388     121,69     0,00
8.789     258.163     137,45     0,00
8.789     268.969     138,67     0,00
8.789     295.455     145,16     0,00
8.789     311.395     138,92     0,00
8.789     327.104     138,96     0,00
8.789     340.793     -335,18     335,18
8.789     375.451     129,14     206,04
8.789     386.650     125,57     80,47
8.789     398.606     124,18     0,00
8.789     428.166     31,66     0,00
8.789     435.844     25,93     0,00
8.789     447.639     34,32     0,00
8.789     462.137     -43,64     43,64
8.789     475.613     -110,39     154,03
8.789     485.022     92,29     61,74
8.789     495.807     91,67     0,00
    Thank you very much

    Published by: 4ndr34 on January 28, 2010 13:38

    Hello

    4ndr34 wrote:
    Thanks, but the model is not available in oracle9 :(

    Are - that you mentioned before?
    It's a good idea to include your version number whenever you ask a question, especially if the version is as old as Oracle 9.

    Here's an analytical solution that must work at Oracle 9 (and more):

    WITH     e     AS
(
     SELECT     hiredate
     ,     CASE
               WHEN  job     IN ('PRESIDENT', 'SALESMAN')
               THEN  -sal
               ELSE  sal
          END     AS sal2
     ,     ROW_NUMBER () OVER ( ORDER BY  hiredate
                               ,            empno
                       ) AS rnum
     FROM     scott.emp
)
,     got_grp_start     AS
(
     SELECT     h.*
     ,     CASE
               WHEN  sal2 >= 0
               THEN  0
               WHEN  EXISTS ( SELECT    NULL
                                 FROM      e   l
                           JOIN      e   m     ON     m.rnum     >= l.rnum
                           WHERE     l.rnum     < h.rnum + 0     -- See note below
                           AND      m.rnum     < h.rnum + 0     -- See note below
                           GROUP BY      l.rnum
                           HAVING      SUM (m.sal2) < 0
                         )
               THEN  0
               ELSE  1
          END          AS grp_start
     FROM     e     h
)
,     got_grp          AS
(
     SELECT     got_grp_start.*
     ,     SUM (grp_start) OVER (ORDER BY rnum)     AS grp
     FROM     got_grp_start
)
SELECT     hiredate
,     sal2
,     GREATEST ( SUM (-sal2) OVER ( PARTITION BY  grp
                                        ORDER BY         rnum
                        )
           , 0
           )     AS credit
FROM     got_grp
ORDER BY     rnum
;

    The EXISTS subquery in got_grp_start does not work (at least in Oracle 10.2.0.3.0 or 11.1.0.6.0) if it refers to "h.rnum", but it does if it refers to "h.rnum + 0" or "h.rnum - 0". ".

    The sole purpose of subquery e is to produce a useful set of raw data, including a simple expression (rnum) that can be used in sorting. You probably have something like e, according to your actual table.

    If you need a separate calculation for, say, all the departments, and then add PARTITION BY analytical clauses.

  • Sum of value in the previous lines?

    Hello!

    I have a result of an sql statement that looks like

    Value of type date
    01.04.2009 00:00:00 0
    01.04.2009 00:00:00 3
    01.04.2009 00:00:00 3
    01.04.2009 00:00:00 4
    01.04.2009 00:00:00 3
    01.04.2009 00:00:00 3
    01.04.2009 00:00:00 3
    01.04.2009 00:00:00 3

    What I'm trying to do is a new column add_months (Date, sum ((Value) of the real line as well all the lines above the actual line). So the result should look like

    Result date V
    01.04.2009 00:00:00 0 01.04.2009 added 0 months
    01.04.2009 00:00:00 3 01.07.2009 added 0 + 3 months
    01.04.2009 00:00:00 3 01.10.2009 added 0 + 3 + 3 months
    01.04.2009 00:00:00 4 01.02.2010 added 0 + 3 + 3 + 4 months
    01.04.2009 00:00:00 3 01.05.2010 added 0 + 3 + 3 + 4 + 3 months
    01.04.2009 00:00:00 3 01.08.2010 and so on
    01.04.2009 00:00:00 3 01.11.2010
    01.04.2009 00:00:00 3 01.02.2011

    I can only use pure sql and it should work on 10g.

    Thanks for any help
    ----
    Carsten 
     DT                       VALUE RES               ***

    Have you written naughty? ;-)

  • With the help of the previous line in a formula calculator

    Hello.  I use the calculator to create a new string that is a custom filtered version of an existing channel.  Unfortunately, I was not able to identify the entrance of previous line in the channel.  To make things easier, let's say my filter is a simple averager.  This is simple pseudocode for what I want to do:

    New_Channel = (Existing_Channel [n] + Existing_Channel [n-1]) / 2

    where n is the current line.

    It's the calculator formula, with I came:

    ch("[1]/New_Channel") = (CHD (' chnRow - 1 ' [1] / Existing_Channel "") + ch("[1]/Existing_Channel")) / 2 + CTNV (chnRow > 1)

    Unfortunately, I think that chnRow returns 0.

    Of course, I'm a beginner.  I'm open to other approaches to the creation of a new channel with a custom filter.

    Thank you!

    Hi jbuttron,

    What you need to do is to copy the channel and remove the first value of the copied channel then the nth line of the original channel is aligned on the e line (N-1) of the copied string.  You must also add the last value of the string copied at the end of this channel as a new value that both channels end up with the same channel width.  Now you can reference the channels with Ch("[1]/old") and Ch("[1]/new") in the expression of canal's calculator, assuming that the channel names are 'old' and 'new' respectively and both are in the first group.  You need not row variable in the expression now, which is good because there is no way to iterate through a variable row in an expression of canal's calculator.  The iteration of the row is implicit in the reference channel Ch("[1]/new").

    Brad Turpin

    Tiara Product Support Engineer

    National Instruments

  • APEX 4.2.5: How reference a column element in the previous line?

    Good afternoon

    I have the following problem:

    I have an IR on a table that contains the values of daily clock of energy (gas and electricity).

    Now, I want to set up a calculated column that contains the daily consumption.
    Power_actual_row - power_previous line.

    Is this possible and if yes how can I achieve this?

    Kind regards.

    Wilfried

    Baerenmarke wrote:

    I have the following problem:

    I have an IR on a table that contains the values of daily consumption of energy (gas & electricity) clock.

    Now, I want to set up a calculated column that contains the daily consumption.
    Power_actual_row - power_previous line.

    Is this possible and if yes how can I achieve this?

    Add a POWER_PREVIOUS column to your report query using the analytical function LAG to access the value of the POWER of the previous row. Use the ORDER byclause in the function to determine the order of the lines. The calculation of the IR then simply uses the POWER and POWER_PREVIOUS values for the same line.

  • Definition of 1st line indent to the length of the previous line. Possible?

    In Ventura, we used to be able to set the indentation of the first line of a paragraph to the length of the last line in the preceding paragraph. Is this possible in ID CS4? I need to do and do not know how.

    Thanks for your help

    Jon

    This quick and dirty script should do the trick. Select text and run this script...

    paras = app.selection[0].paragraphs;
for(var i=0;i

    Substances

  • Pencil on C6 erases the previous lines

    When I use my pencil in C6, there is something weird about it. Whenever I draw a line or draw a line, my pencil on white ink, as if it is clear. What is the problem? Sorry, new to C6, help would be great.

    Looks like you have Auto Delete checked in the options toolbar

  • CS4 does not select the style of the previous line of the pen tool

    When I used the pen tool in CS3 I could select any style of line (for most of the arrows) and be able to make the new line wih this style. In CS4 it creates just a black line each time with the same thickness.

    In the appearance Panel, click the drop-down (top-right) and deselect new Art has basic appearance.

  • Can I reuse my activation code of FSX on a new PC after that my old computer?

    I recently installed and activated the FSX Deluxe on my computer, which unfortunately has crashed (hard drive problems).

    I bought a new computer, and I would like to re - install (and activate) FSX. Can I re-use the activation codes?

    Hello

     
    You can check out the link and check if it helps.
     
    The question you have posted is related to Microsoft Flight Simulator and would be better suited in the Microsoft Flight Simulator forums. Please visit the link below to find a community that will provide the best support.
     

  • always fill the last line of a table (which may expand)

    Hi, I have problems with a button in the table A that adds a line to another table (table B) and then fills automatically some row of the table (table A) data in the newly created line in the other table (table B)

    Here is my code (then) - I should also mention that table A has a button to add several lines to itself:

    It works almost - however, it does that if the amount of lines in every game table - which they are not necessarily that the user may or may not opt to add the row of the table has to table B. eg. A table might be deep 4 rows, but the table B can have only 2 rows.

    tableB.row.addInstance (0);

    vCol1 var = this.resolveNodes ("tableA.row.cellA");

    vCol2 var = this.resolveNodes ("tableB.row.cellA");

    vCol3 var = this.resolveNodes ("tableA.row.cellB");

    vCol4 var = this.resolveNodes ("tableB.row.cellB");

    for (var I = 0; vCol1.length i < ; I ++) {

    vCol2.item (i) .rawValue = vCol1.item (i) .rawValue;

    vCol4.item (i) .rawValue = vCol3.item (i) .rawValue;

    }

    I'm new to scripting (learning on the fly), so my question is, given that the first command is to add a new row to table B, can I change the code so that vCol4 and vCol2 var are always the very last line created? In this way, all the previous lines that have been added will be shunt down in the list and will not be affected, but click on the new button? Or is there a better way to do this.

    Hello

    I think the key here is that the addInstance method returns the line he simply added.  If your add-in can be something like;

    var button = xfa.host.messageBox ("' you are about to ADD this entry in the Table B. would you continue?", "add to table B Section"1, 2 "");

    If (button is 4)

    {

    newRow = tableB._tableBrow.addInstance var (0);

    newRow.cellA.rawValue = cellA.rawValue;

    newRow.cellB.rawValue = cellB.rawValue;

    }

    I don't know how you want that table a delete button to work?  Should you remove the first row B of the table with a cellA and corresponding cellB?

    Concerning

    Bruce

  • Sum of the values of the previous rows in a PivotTable

    Hello

    I have a dynamic table has several lines (dynamically added via a button).  A column in the table is a quantity column.  Another is a Total of the column.  We do not keep a cumulative, but wants to only display an total when the rest of the cells in the same row are emty and the previous lines has / have values in the quantity column.  The Total is the sum on the Quatnities until a blank line.  Here is a sample.  How can I get the value of the quantities in the previous lines?

    Quantity Total


    5
    8
    12

    		25


    7
    27

    		34


    22

    		22


    Another option could be to put the Total in the last row with data as opposed to the line below the data.

    Any ideas?

    Kind regards

    Karl

    The script is written to achieve your requirement (i.e. the second approach you mentioned)

    .

    You can either contact me at [email protected] for the example of created form.

    Or what follows is the Source XML of the form. Copy all the content in your form XML source mode and see the result.

    http://ns.Adobe.com/XDP/"timeStamp =" "2012-02 - 28 T 14: 04:54Z ' uuid ="2c561cdf-3377-4e84-9a89-51e740bb2fea">"

    Adding line

    Quantity

    Total

    user interface

    >

    character = "Myriad Pro

    "/>

    margin = topInset ' 1 mm ' bottomInset = ' 1 mm ' leftInset = ' 1 mm ' rightInset = ' 1 mm»

    "/>

    para vAlign = "middle".

    "/>

    border

    >

    edge

    />

    angle thickness = "0,1778 mm

    "/>

    border

    >

    field

    >

    = "Total" field name "44.47 mm" h = w = "9,317 mm" access = "readOnly".

    ">

    user interface

    >

    numericEdit

    >

    presence at the border = "hidden".

    ">

    border

    >

    the margin of

    />

    numericEdit

    >

    user interface

    >

    character = "Myriad Pro

    "/>

    margin = topInset ' 1 mm ' bottomInset = ' 1 mm ' leftInset = ' 1 mm ' rightInset = ' 1 mm»

    "/>

    this.rawValue = null; Clear the total value

    }

    } catch (e)

    {

    app.alert (e)

    }

    9.0.0.0.20091029.1.612548.606130

    http://www.XFA.org/schema/XCI/2.8/">

    PDF

    1.7

    3

    *

    http://www.XFA.org/schema/XFA-locale-set/2.7/">

    January

    February

    March

    April

    May

    June

    July

    August

    September

    October

    November

    December

    Jan

    Feb

    Mar

    Apr

    May

    Jun

    Jul

    Aug

    Ms

    Oct

    Nov

    Dec

    Sunday

    Monday

    Tuesday

    Wednesday

    Thursday

    Friday

    Saturday

    Sun

    LUN

    Mar

    Fri

    Game

    Fri

    Sam

    AM

    PM

    BRITISH COLUMBIA

    AD

    EEEE, MMMM D, YYYY

    MMMM D, YYYY

    MMM D, YYYY

    M/D/YY

    SS Z

    SS Z

    SS HAS

    h: mm A

    GyMdkHmsSEDFwWahKzZ

    z, zz9.zzz

    $z, zz9.99 | ($z, zz9.99)

    z, zz9%

    .

    ,

    %

    -

    0

    $

    USD

    .

    "RDF: RDF xmlns:rdf ="http://www.w3.org/1999/02/22-rdf-syntax-ns#

    ">

    "RDF: description xmlns:xmp ="http://ns.adobe.com/xap/1.0/"rdf: subject"

    ="">

    XMP:MetadataDate > 2012-02-28 T 14: 04:54Z

    >

    XMP:CreatorTool > Adobe LiveCycle Designer ARE 9.0

    >

    RDF: description

    >

    "RDF: description = xmlns:pdf"http://ns.adobe.com/pdf/1.3/"rdf: subject"

    ="">

    PDF:producer > Adobe LiveCycle Designer ARE 9.0

    >

    RDF: description

    >

    "RDF: description = xmlns:xmpMM"http://ns.adobe.com/xap/1.0/mm/"rdf: subject"

    ="">

    xmpMM:DocumentID > uuid:2c561cdf-3377-4e84-9a89-51e740bb2fea

    >

    RDF: description

    >

    "RDF: description = xmlns:desc"http://ns.adobe.com/xfa/promoted-desc/"rdf: subject"

    ="">

    DESC:version rdf:parseType = "resource".

    ">

    RDF: value > 9.0.0.0.20091029.1.612548.606130

    >

    DESC:REF > / template/subform [1]

    >

    DESC:version

    >

    RDF: description

    >

    RDF: RDF

    >

    x: xmpmeta >

  • How to make a graphic inside a while loop to maintain the previous values

    At first I tried to use a the VI Express XY graphics to create a track of points.  However, the chart is a trace linear between the first point in the new line and the last point of the previous line.  It then creates the new line as you wish.

    I tried to use a loop with group a cluster for the chart, but the chart resets the plot at each iteration (as expected) and I can't find a way to maintain the previous data.  I tried using shift registers, but was unable to find a way to do it, and I tried also the cluster of a painting company, but can not find a way to make the cluster to a 1 d of a cluster of 2 elements array.

    One option is to have is to find a way to maintain the previous data, but the preferred option is to create a new path to each iteration to see the color change for each new parcel.

    I take stabbed it because I don't know exactly what you want. But I think that's what I've shown here. You must use a shift on your outside register while loop, as I showed. Your image where you tried to use a shift register shows a misunderstanding of the shift registers and how well they work, then I'd take a peek at these tutorials.

  • Tabular forms – test whether cursor/focus in the last line (Apex 5.0)

    I would like to optimize my sub fast data entry form. I have already added dynamic actions for Excel style and down navigation with up and down keys and also auto-insert new line when you press enter on the last field.

    The last thing that I want to achieve is to creata a dynamic action trigger that fires only when cursor is in the last row of tabular presentation. I tried to do that with the function. is() JS, but without success.

    Is there a way to test whether the current row (the row with focus) is the last line in the form of tables?

    Yes, look that I wanted to accomplish was that, if the cursor is in the last line (column_name1) that if the user presses THE button the last row is deleted and cursor is focused on the previous line (column_name2).

    After numerous tests that would be a DA who works for me:

    Event: Down key

    Selection type: jQuery Selector

    jQuery selector: .column_name1

    Condition: Expression JavaScript: (event.keyCode = $. ui.keyCode.UP) & (.closest("tr").is$ (this.triggeringElement) (": last-child"))

    Code:

    $(this.triggeringElement).closest("tr").remove ();

    $('input.column_name2:last').focus ();

  • How to turn off the display of the previous search entries?

    Suggestions are disabled.

    Firefox stores the previous form entries and previous search as part of its function of auto-complete entries. You can disable this feature and clearly past entries as follows:

    To disable the feature: Open the control panel of the Privacy Options dialog box:

    "3-bar" menu button (or tools) > Options > privacy

    If the selection is ' Firefox will be: remember the story "to take" conservation rules: use the custom settings for history. " This should indicate a number of check boxes, etc..

    Uncheck the box ' Remember search and form history.

    To clear all the previous entries: Use the clear recent history.

    Important: Be sure to deselect all other sorts of history while they are not permanently deleted.

    Or the other

    • button '3-bar' menu > history > clear recent history
    • (menu bar) History > clear recent history

    Expand the lower part of the dialog (if necessary) to display checkboxes for the types of personal data and uncheck all categories other than "form & Search History".

    At the top of the dialog box, select the time range "Everything" and then click OK.

    Success?

  • How to get the sum of the first row in the previous row?

    Dear gurus... I need to get the sum of a column of the first row of my result set to the previous line based on a condition. I read analytical functions for this but they provide the sum of the first rank to Current Row through declaration "rows between Unbounded preceding and current line. Y at - it a statement that calculates the sum as "rows between Unbounded preceding and previous row?

    Hello

    kamranpathan wrote:
    Dear gurus... I need to get the sum of a column of the first row of my result set to the previous line based on a condition. I read analytical functions for this but they provide the sum of the first rank to Current Row through declaration "rows between Unbounded preceding and current line.

    If you do not explicitly give a windowing clause, then you get the default windowing clause you indicated.
    If you want another clause of windowing, ionclude in the analytic function call.

    Y at - it a statement that calculates the sum as "rows between Unbounded preceding and previous row?

    Yes. The correct syntax for "Previous rank" is «PREVIOUS 1»

    ...  ROWS BETWEEN  UNBOUNDED PRECEDING
            AND        1          PRECEDING

    For more information, search for "Analytic Functions" in the manual of the SQL language:
    http://download.Oracle.com/docs/CD/E11882_01/server.112/e17118/functions004.htm#sthref917

    I hope that answers your question.
    If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
    Explain, using specific examples, how you get these results from these data.
    Always tell what version of Oracle you are using.
    You will find the answers better faster if you always provide this information whenever you post a question.

    Published by: Frank Kulash, Sep 17, 2011 17:04
    I just saw Etbin responses.
    As usual, Etbin has a good point. If the column that you are basically cannot be NULL, then it is probably easier to subtract the total current line and use the default windowing clause.
    Even if it can be null, you find may be easier to use this approach.

Maybe you are looking for